Migrate Calendar/Contacts from one Exchange server to a new server?

I have an iPhone synced to my calendar and contacts on one Exchange server (old.edu). I am in the process of migrating to a different Exchange server (new.edu). Does anyone know if I can use the iPhone to be the conduit from server old.edu to server new.edu? e.g., can I sync iPhone with old.edu data on it to a computer that has a new Exchange server configured on its Outlook program and have the old.edu data copied onto the new.edu server?

No, you cannot. Exchange contacts data is synced 'over the air' only, and thus managed separately from iTunes (USB cable) syncing.
If you have Outlook connected to the old exchange server, you can export your contacts then import them after you link to the new server. But the iPhone is not going to help you in this situation.

Similar Messages

Getting tasks, calendar event from MS Exchange Server

Hello!
I have a problem. I need to connect to MS Exchange Server and read different kind of information. I was advised by my manager to look for libraries to do so. He said that there are probably some and if not then you should think how to do it without them. I looked for some and discovered that there are some kind of them but they are for money $$$.
I need to connect to Exchange Server to read tasks, calendar events and mail. I looked throw the forum and found some topics, but no results. I found a framework which is disributed for free under GNU licence www.omesc.com
Please, tell me, anybody, is there are any open source free libraried to do that. And if not that can you give me some ideas about how can I connect to Exchange Server and get some information from it.
I am desperate, I don't know what to do, please anybody help me...

Hi,
You can use directly a jndi ldap context if the Ldap connector of your Exchange server is up...
It worked perfectly for me as anonymous...
One other way, if you have an active directory, you can connect to it as Ldap with ldap authentication ( mandatory for directory browsing... )
I hope it helps
Newbeewan

Mass Migration of Contacts from One Org to Another

Hi All
I have requirement to migrate dozens or hundreds of party relationship (organization contact) records from one organization to another. For example, if BONY Mellon sells a business unit to JP Morgan Chase, there may be hundreds of BONY contacts that need to be moved to JPM. Today that process is manual - the contacts need to be re-keyed. Is there any API(TCA) is available to migrate the contacts?
Please advice..
Thanks
Ravula

Any Ideas please.......

Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation!

How can I copy my contacts from the exchange server group into the Icloud group ?

I have both exchange server and I cloud under my contacts. I want to merge ALL of the contacts under 1 group (Icloud) how can I do this?
Thanks!!!!!

The Pages App can email your resume in Word format if the company accepts this.
See the App Store for Pages.

HT5621 copying contacts from one apple id to a new apple id

I had to create a new Apple ID for several reasons. My computer has the new Apple ID but my phone has the old Apple ID. I would like to change over to the new Apple ID but I do not know how to transfer my contacts and calendar. Is this possible?

As far as I'm aware contacts are not linked to Apple ID.
As for calendar I would add your new Apple ID and make it default but keep your old one until the events you already have are past. For re occurring events just change it's associated calendar (near the bottom of the edit event screen)
There is probably a quicker way but I'm unsure

Migration of data from one user profile to a new (to me) Palm

I lost my Tungsten E2. bought a used Tungsten T2 as a replacement. I need to move all my data and programs from my desktop to the new handheld?
How do I do this?
THanks!!!
S
Post relates to: Tungsten T2

You will need to hard reset the E2. Change the hotsync conduits to desktop overwrites handheld. Connect the E2 to the PC and select to sync with an existing username. Select the username that has all your data and complete the sync.
The hard reset will erase all data on the device. Make sure you sync to the PC to backup your data.
Click on the following link to the kb.palm.com webpage for the article regarding reset procedures
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
The best way to preserve your data is to export the data in each application in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Message Edited by cygnusX1 on 10-07-2009 09:23 AM

How do I export public folder data from inactive exchange server?

I have migrated from SBS2003 (old) to SBS2008 (new)
Used migration wizard / answer etc... All went well, expect for the public folders; which failed.
Question: How do I retrieve the public folder information from the OLD (inactive) server and import it to the NEW server?
The OLD server has been removed from the domain. I have backups of the OLD server and its original hard drive; where the public store info is located.
I tried PDDAVAdmin.exe; did not work for me.
All help is greatly appreciated.
Bill

Hi Amit,
I did as Zoltán said; searched the Internet for edb recovery tools and found a number of companies and Software Products which might help. I also considered your option as well but I have limited experience with building a recovery server and it sounds time consuming.
Our office is small we have 10 users; we keep contact lists in the public folders. I want to restore the contact lists from the inactive source server to the active destination.
I believe the process is called "rehoming" (from the web -- "In a Windows environment, rehoming is the process of moving public folders from one Exchange server to another. It involves the creation of a replica of the public folders on the target destination server, waiting for replication to complete, and then removing the public folders from the original source server.")
Background:
We have two servers FHHSERVER (the source, SBS2003) and FHHSERVER2 (the destination, SBS2008).
I used the SBS2008 migration wizard. The important stuff in the exchange database transferred ok; all emails, schedules, tasks, notes, etc. Everything appeared to work; including public folders.
Microsoft allows a 21 day grace period to complete the migration. I believed the migration was successful so on the 21st day, I followed Microsoft’s instructions and demoted the source server, removing it from the domain.
That’s when the trouble started….
Unknown to me; the public folders remained on the old source server. I did not detect this problem since, during the 21 day migration grace period, the destination server was using the old source server to replicate public folders. As long as the old source server was active, eveyone could open public folder contact lists. After the source server was demoted, the destination server lost its replicate and now our users cannot access that information.
Another problem is that the inactive server is n o longer licensed and the Exchange console cannot connect to its stores.
It would seem to me that this problem should be relatively simple to fix. I need some way to open the public folder stores and export the contact lists. I’m not even sure where the public folder database is located on the hard drive.
I hope this explains the situation in greater detail and that you may be able to offer some insight on how I might resolve this issue.
Oh, I also tried using EXMerge but cannot seem to make it work either. <http://www.microsoft.com/downloads/details.aspx?familyid=429163EC-DCDF-47DC-96DA-1C12D67327D5&displaylang=en>
Thanks!
Bill

How to move phones from one CUCM server to another?

How easy is it to migrate IP phones from one CUCM server to another?
The situation is this:
A vessel currently sitting in dry dock has 14 IP phones onboard which currently register with a CUCM server half way round the world (literally). As you can imagine there is quite a fair amount of delay for the signal processing, not to mention the connectivity being over a VSAT link. This being a temporary solution.
A CUCM server has been configured and installed on the vessel with all the relevant partitions, route patterns, trunks etc. The phones have also been added to the new server ready for migration. The only real thing that will be different when the phones are migrated is the Directory Number on each phone. Both CUCM servers are running software version 7.1.3
The phones currently pick up their local IP addresses via a local DHCP server which assigns 150 TFTP Server IP Address for the remote CUCM server. Is changing the the TFTP Server IP address to the local CUCM server enough to have the phones register with the local server.
This is not something I've tried before so would appreciate feedback or any comments that may indicate anything I missed along the way.
Thanks,
Ric

Hi Ricardo,
On the DHCP scope created for the voice vlan change the Option 150(TFTP Server IP address) to the new CUCM and remove/delete the remote CUCM IP address just to ensure that phones once after registering to the new CUCM will not fetch any config from the remote CUCM as the DN's of the phones are changed on the new CUCM please ensure this.
Apart from this i dont see any challenges as the firmware of the IP Phones will also remain same as CUCM version is same.
Hope that helps.
Regards
Najaf

How can I back up Contacts synced from an Exchange server into iCloud?

Hi everybody. I would like to back up into iCloud my Contact (and Calendars too) which I have previously synced to the device ( that is an iPad air running iOS 8.2.1) from an Exchange server. The green flags in Settings / ICloud are duly switched on but no contact will appear under Groups/all iCloud. Is this feature feasible at all or is there something missing in the procedure I follow ? I'll appreciate any clues. Piero

Hi Brendan. Thanks for your clue but unfortunately that did not solve the problem. Prior to posting my query I had already checked out the article you're referring me to (whose URL is http://support.apple.com/kb/PH3605). It may well be that I'm not being crystal clear owing to my far from perfect English but the whole point is precisely that I'm not able to import contacts which ALREADY appear on my iPad - being the outcome of syncing my remote MS Exchange account with the device - into iCloud. The procedure described in the quoted article simply doesn't work (for that matter, no such Setting sign pops up under ICloud contacts). In fact, it appears that the only contacts which I'm able to keep under iCloud are those which I directly create from scratch within iCloud Group itself. Since I'm likely to have my MS outlook account ( which is mirrored into a MS Exchange one for remote usage) forcibly deleted in one month time or so, I started worrying about how to keep my contacts alive/ intact after that deletion. Hope the issue got clearer now ... Cheers, Piero.

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.

I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

Best Practice for Migration of BO from one server to another

Hi All,
I would like to know what is the Best pratice for Migration of BO from One server to another.
i have Installed BO Xi R2 on my server.
Thanks,
Anendu Bothra
Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
Choose Copy, then click OK.
Choose the version information for the source CMS database.
Select the database type for the source CMS database, and then specify
its database information (including host name, user name, and password).
Select the database type for the destination CMS database, and then
specify its database information (including host name, user name, and
password).
When the CMS database has finished copying, click OK.
Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
I'd advise taking full backups beforehand.

Import Wizard vs LCM for Migration of BO from one server to another

Hi Experts,
Can anyone highlight the differences between Import Wizard and LCM (in terms of migrating/deploying BO from one server to another)?
We are currently using BO XI 3.0, which does not support LCM. I'd like to know if LCM has enough advantages to justify an upgrade to BO XI 3.1.
Any advice is much appreciated.
Linda

Hi Tim,
Thanks a lot for your reply. May I have a follow-up question?
For my client, the following deployment activities are necessary:
1) From Development server, to one Test server containing 2 separate sets of objects - one set for SIT, the other set for UAT.
Object (Connections, Universes, Webi reports) names in Test server will be different from those in Development Server due to the existence of 2 sets of objects on the same server.
   a) For SIT: Universe A on Development server -> Universe SA on Test server
   b) For UAT: Universe A on development server -> Universe UA on Test server
2) From Development server, to Training server.
   Same object names will be used in Training server.
   E.g. Universe A in Development server copied to Universe A in Training Server
3) From Development server, to Production server
   Same object names used in Production server.
From the above, there will be 4 rounds of deployment. Is Import Wizard sufficient? Or is LCM still the better option?
Thanks in advance for your advice.
Linda
Edited by: Linda on Mar 27, 2009 3:36 AM

Mountain Lion / Mac mail disconnects from MS Exchange server.

We use an MS Exchange account for our company email. We bought 2 new retina display MacBook Pros running Mountain Lion last Fall. My old laptop is still running Lion. Lion / Mac Mail works fine on the old laptop, never losing contact with the MS Exchange server. Mountain Lion / Mac Mail randomly loses contact with our exchange server on a regular basis. This results in a slow and painful re-download of 2 years worth of email while I have to resort to my old laptop to keep up with new incoming email. I check these discussions occasionally when I can find a spare moment and I have found some similar symptoms being complained about, but no solutions yet. There have been a couple of OS updates since we bought the new laptops, but alas, no mention of this problem. It seems no one is doing anything about it. Have I missed a post? Anyone have any suggestions? This is getting really old.
Thanks!
D

I was having the same issue! I finally found a solution to it!
1. Delete your exchange account from the Mail, Contacts & Calendars pane in System Preferences.
2. Go to Finder, click "Go" in the menu bar, click "Go to Folder" and type in "~/Library" (without the quotes) in the box. This will take you to your user Library folder.
3. Use the search box in the finder and type in "com.apple.notes" and click "Library" in the search bar that appears. This should now find several folders and files related to the Notes app. Rename or delete everything except the help files (with the lifesaver icons on them). Just to be safe, I'll list the files and folders you should delete or rename and their directory paths:
com.apple.Notes - /Users/danieloria/Library/Containers/com.apple.Notes/
com.apple.Notes - /Users/danieloria/Library/Containers
com.apple.Notes.plist - /Users/danieloria/Library/Containers/com.apple.Notes/Data/Library/Preferences
com.apple.Notes.savedState - /Users/danieloria/Library/Containers/com.apple.Notes/Data/Library/Saved
4. Restart your Mac. Put your exchange account back into System Preferences, you can go ahead and activate the Notes sync service.
5. Open Notes and it should be working now!
NOTE: I also deleted all the stored information related to the exchange account in Keychain Access when I deleted the 4 com.apple files. This may or may not be necessary, but I just thought it was worth mentioning.

IPad 2 Contacts sync with Exchange server and change Outlook custom form

Following iPad synchronizing Contacts, we find that our custom form in Outlook is pushed back to the Microsoft default “IPM:Contact”.
It appears that only the first 500 [approximation] contacts are affected. There are 5k contacts and we are seeing no other patterns.
We are not expecting an iOS Contact will resemble that of MS-Contacts, at the same time we are puzzled how iPad is rejecting and then causing ActiveSync to force change to the Exchange server.
Has anyone else experienced this, and can perhaps recommend a workaround?
Environment
MAC iPad2 iOS v4.3.5 attached using ActiveSync
Exchange 2003 SP2
Users are with either Outlook 2003, 2007, or 2010
Thank you very much.
Best Regards.

I'm excited to finally sync my work email with my iPhone. Our IT didn't support it and we work off of an Exchange server. I, too, was nervous about which contacts to sync. While I want my work email, I don't need my contacts and would rather have mine from my mac at home. Unfortunately, you can only do one at a time. The following paragraph is from a c net review. Find the entire article here (the part about the Exchange Server is about 1/2 way down):
http://reviews.cnet.com/apple-iphone-3g/
//Once you're ready to go, the iPhone will sync your Outlook e-mail, contacts, and calendar. Be advised that while the iPhone can support multiple POP3 accounts at once (two Yahoo accounts, for instance), it syncs with only one Exchange server and, worse, with only with one calendar or contacts list at a time. If you have a separate personal calendar, your work calendar will replace it once you start the sync. (You'll be notified before it happens.)//
Hope this helps!
Vicki

Migrate Calendar/Contacts from one Exchange server to a new server?

Similar Messages

Maybe you are looking for