Migrate client data from Notes to Exchange 2010

Hello!
We have no administrator access to Lotus Notes server and therefore we want to perform the client data (mails and contacts) migration. We need to move the mails
from Notes (8.5) to Outlook (2010 or older which will be connected to Exchange 2010).
Question: is it possible to do it without purchasing additional migration software? If yes, then what is the best way to accomplish this?
Thanks!

DAMO 8.0.2 supports Outlook 2007
It is available in two places:
(1) The IBM Passport Advantage Website.
(2) Located on the Lotus Notes "All Clients" CD in the Apps folder.
Is there an 8 release of Domino Access for Microsoft Outlook?
https://www-304.ibm.com/support/docview.wss?dc=DB520&rs=3025&uid=swg21265830&context=SSPQ69&cs=UTF-8&lang=en&loc=en_US&rss=ct3025lotus
MCTS: Messaging | MCSE: S+M

Similar Messages

  • TCP packet out of state: First packet isn't SYN & Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]

    We are transitioning from Exchange 2003 to Exchange 2010.  We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
    address book but sometimes even normal operation like click the Send button.  The problem does not affect OWA and extremely rare when Outlook is running in cached mode.  Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
    We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP.  And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
    We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933).   And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
    This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour. 
    Can somebody tell me if these out-of-state are the cause of our problem?  And how to fix it?
    THANK 1,000,000

    Hello AndyHWC,
    I did some consulting with our CAS team and received the following feedback to your post:
    It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs.  Where is this firewall located?
    Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
    LDAP." indicates to me that the firewall is between CAS and GC.  This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
    If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
    issue to analyze.  If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
    Also verify that all NIC card drivers are updated to the latest driver version
    More information about firewalls with Exchange 2007/2010
    http://msexchangeteam.com/archive/2009/10/21/452929.aspx
    http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
    You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
    cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
    http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
    “The Installation of a Client Access Server in a Perimeter Network Is Not Supported
    Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
    2007.
    Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
    and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
    For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
    or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
    Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
    for various services, see Data Path Security Reference.”
    Thanks,
    Kevin Ca - MSFT
    Kevin Ca - MSFT

  • How to migrate the data from DB to another DB

    Hi folks,
                 In my project I have one requirement. Let me explain in detail we are maintain two databases one for
                 master database called *GIIS* and one is history database HIST. Both DB version is 10g R1.
                 (Both DB’s have same no table as well structures)
                 1.  The GIIS database contains nearly 400 tables (master table as well as temporary table)   
                       each Master table having it’s own temporary table.
                 2. Whenever we made the entry first it will go to temporary table after authorized that entry it will move to the master table
                 3. But the temporary table contains the data after move to master table .
                 4.     The temporary table data’s will be move to the HIST database each and every day at the night.
                    This migration we done through the procedure.  After migration complete the temporary table data’s will de deleted.
    My Question:
               1.     Whether it’s good practice to migrate the data from GIIS DB to another HIST DB using oracle stored procedure.
                     (we created the DB link from GIIS to HIST) 
               2.     If not can any one suggest me the way to migrate the data from GIIS to HIST.?
               3.     Is there any other possibility to migrate the data from GIIS to HIST with out using procedure?Thanks
    Arun

    Arun wrote:
    Hi Mr.Aman Brother
    First of all sorry . I am not saying that don't command my requirement. Just i want know the way of migrate the data from one DB to another DB.
    you saying that IMPORT/EXPORT is one of the way to do migration.
    But in client side they don't know how to do the IMPORT & EXPORT the database..
    Can you suggest me the another way to do that
    Arun,
    If the client doesn't know how to do exp/imp, I would really doubt and would be immensely concerned before suggesting the client any other way. If they don't know, tell them that there is a concept called test database which is used for learning so they should invest time to learn this technique since the other options suggested by fellow members are far more tougher than this one.
    Aman....

  • Process to migrate configuration data from one BW development system to other

    Hi SAP Gurus,
    We need to migrate configuration data from one BW system DE1 to DE2.. Both systems are SAP net weaver  7.3.
    DE1 is BW pre-production system and DE2 is BW DEV.
    No transactional  data required.
    Please share a document if available.
    Kindly, let me know the procedure for Remote Client copy or client export/import with steps.
    Also let me know the pre-requisite for these activities.
    Thanks,
    Avadhesh Sharma
    +91 8095226536

    Hi,
    Remote Client Copy (SCC9)
    Remote client copy is performed in rare situation. When the client copy is done
    between two different SAP systems, the copy is called remote client copy.
    Before remote client copy is performed, a RFC connection must be set between those
    systems using SM59.
    1. Check RFC connection is working fine between two systems you want to perform
    remote client copy using SM59
    2. create client in the target system you want to copy the client
    3. login to target client using user SAP* and password PASS
    4. execute tcode SCC9 and select the RFC for the source system
    5. select the profile you want to copy like SAP_ALL
    6. select source client number you want to copy
    7. Select source client master data , mostly it is the same client number
    8. Now click on schedule as background job.
    9. Leave the background server field blank.
    10. Click schedule.
    11. Select Immediate from next screen.
    12. Save the screen.
    13. Client copy is scheduled now as a background job and client copy process started.
    14. The progress can be monitored using tcode SCC3
    Client Export/Import
    A client transport consists of two steps:
    First a client export extracts client data from the source client
    to files at the operating system level. Then the data is imported
    from the operating system files into the target client.
    To perform a client export, follow these steps:
    1. Log on to the source client. From the SAP initial screen,
    choose transaction SCC8 (Client Export). Select the data to
    be copied using a profile.
    2. Indicate the target system to which the client will be copied.
    The target system must be defined in TMS as part of the
    transport domain.
    3. Begin the client export. Because copying is a lengthy
    process, use scheduled background processing.
    Do not run any other client copy tool before the
    data export is finished.
    This export process will generate up to three data files at the
    operating system level:
    • RO< number >: this file contains cross-client data
    • RT< number >: this file contains client-specific data
    • RX< number >: this file contains SAPscript texts
    Depending on the type of data selected through the client
    transport profile, the client copy command files added to the
    buffer of the target system are as follows:
    • <S-SID>KO<number>: this file is for cross-client data
    • <S-SID>KT<number>: this file is for client-specific data
    • <S-SID>KX<number>: this file is SAPscript texts
    The client export change requests are not imported when an
    Import all takes place. Therefore, you must import these requests into the target client
    using TMS. Choose one of the transport requests of the client transport in the Transport
    Management System (TMS). The other transport requests belonging to this client
    transport are then automatically added in the correct order.
    After the import process has completed, post-import activities are required for object
    generation steps. After completing the import, log on to the target client. From the SAP
    systems initial screen, choose transaction SCC7
    Regards,
    Chandu

  • I can't migrate my data from my old pc to my new macbook pro

    Hi,
        I have been trying to migrate my data from my PC to my new mac but it always seems to fail.
    At first, I would begin the migration assistant and then after a while the PC would just crash.
    But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.
    If anyone has any advice I would really appreciate it!!
    PS I also have an Ethernet cable if that's of any use but I don't know how to use it.

    I suggest you stop using the Migrastion Assistant. Simple fact is, as you have found out, that it does not work most of the time and when it fdoes actuall transfer data it doesn't do it very well.
    Just network the 2 computer together over your LAN and copy and past the files you want to move to the Mac.
    Otr use an External drive, formatted either FAT32 or exFAT (doinig the formatting on the Windows PC) and then copy to the external from the Win PC and then copy from the external to the Mac.
    You'll be happier.

  • Recall message from OWA in Exchange 2010

    Dear All,
    Is it possible to Recall message from OWA in Exchange 2010?? we have ex2010 sp2.
    if possible please provide steps
    Sunil
    SUNIL PATEL SYSTEM ADMINISTRATOR

    First, Exchange 2010 SP2 is no longer supported.  Please update to SP3 at your earliest convenience. 
    https://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
    Second, message recall has never been available in OWA.  This is an Outlook feature, not an Exchange feature. 
    http://support.microsoft.com/kb/197094

  • How to migrate the data from DEC RDB 5.1 to Oracle 11g

    Hi,
    As part of my project, we need to migrate the data from DEC RDB 5.1 present on Alpha server with VMS 6.1 OS into Oracle 11g. The size of the data in DEC RDB is around 40 GB.
    Could you please suggest various ways of getting this done in easy and simpler way?
    Thanks in advance.

    Hello,
    when Oracle bought Rdb from Digital Equipment Corporation (DEC) in 1994, the name of the product changed from DEC Rdb to Oracle Rdb. Meanwhile the actual version of Rdb is 7.2, so you are on a VERY old version. And that excludes the suggestions from the mentioned note to use a database link from Oracle RDBMS to Rdb, that is simply not possible with that old version of Rdb.
    But Rdb 5.1 knew already the Rdb Management Utility (RMU) - I just checked that with Rdb 4.1 which is even older.
    There are two commands that are helpful for your task.
    RMU/EXTRACT - that writes the metadata into a file. That output helps you to build a script to create all the objects in your target database.
    RMU/UNLOAD - that writes the data of each table into a formatted file (one file per table). That output can be used by the SQL*Loader to load your data into the target database.
    You can read all details about these commands in the online help on your Alpha. At first, issue the HELP command and look in the output list whether it lists a command RMU or RMU51. Then run that command:
    $ help rmu /extract
    and
    $ help rmu /unload
    Replace rmu by rmu51 if the help command shows you that rmu51 exists but not rmu.
    There is one caveat. Do you use blobs in your Rdb database? If you don't know that, create an the output with RMU/EXTRACT and search the output file for the string LIST OF BYTE VARYING. If there are none then you have no blobs. If you have some you need to take more care of them, they can't be unloaded into a formatted file, that must happen programmatical. If you have such fields then let me know, then I'll tell you how to get them out of your Rdb database.
    Best regards
    Wolfgang
    P.S.: For Rdb related questions it is better to ask in our Communities at https://communities.oracle.com/portal/server.pt/community/rdb_product_family_on_openvms . That forum is watched by Rdb Support and Development.

  • Migrate Cal-Data from  V3.0 to OCS

    We plan to migrate the data from the calendar version 3.0 on AIX to the OCS R1 Calendar. After exporting (unicpoutu) an importing the data the descriptions and the acls are missing. They are not in the export-file. Is there any other way to migrate the data?
    Bye
    Michael

    We plan to migrate the data from the calendar version 3.0 on AIX to the OCS R1 Calendar. After exporting (unicpoutu) an importing the data the descriptions and the acls are missing. They are not in the export-file. Is there any other way to migrate the data?
    Bye
    Michael

  • Urg req: Migration of data from 1 category to another - Error with 5 files

    Gurus,
    I am trying to migrate the data from one content category to another and it woks just fine with the standard sap report:DMS_RELOCATE_CONTENT.
    We moved all the documents except 5 files, when we use the report for the DIR's the content server shuts down automatically.
    I tried to read the file from SAP (CV03N) and the same thing happens. Can anyone pls suggest any solution for the issue. If we can atleast read the file we can check it into other content category manually but the challange here is to know what is causing the content server to be down.
    Appreciate your suggestion ! !
    //Madhav.

    Hi,
    could it be that you have also raised a SAP support message on this issue? Because I remember this kind of scenario and I forwarded a support message to the Content Server experts some days ago. At the moment the Content Server development team is analysing the issue.
    So if this is you message I would kindly ask you to wait for the reply of the development expert. Otherwise please tell me so I can update you with the findings too.
    Best regards,
    Christoph Hopf

  • I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

  • Migrating from Shared/Hosted Exchange 2010 to Onsite Exchange 2013

    Hi All,
    Hoping for some advice regarding a migration project I'm due to run with. A client has their current email data with a 3rd party hosted Exchange platform, this is a completely separate platform from their onsite AD infrastructure.
    Platform wise it is built on Exchange 2010 that only really allows OWA/Outlook Anywhere/ActiveSync access. We'd like to migrate this platform to a more dedicated onsite Exchange 2013 platform.
    Any software tools or advice appreciated, we're hoping to avoid exporting all the content to PST and manually importing but if this is the only way then fair enough. If there are utilities that may allow mailbox backfilling to suck the data out and in to
    the new mailboxes in 2013 that would be awesome.
    Thanks in advance!

    Hi,
    According to your description, my understanding is that you want to migrate mailboxes from the other forest to your forest.
    I recommend you refer to the following article to achieve migration:
    http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Can I migrate users from a hosted Exchange 2010 to Office 365 Enterprise E1 without the need of third party software?

    I am hoping I am posting to the correct forum.  We are currently using a hosted Exchange 2010 service through Intermedia and due to continuing issues with them and the pricing, we are getting ready to migrate to Microsoft’s Office 365 Enterprise
    E1 platform.  My question is this, besides the fact that we will need to set up ADFS for SSO, will I be able to migrate our existing mailboxes from Intermedia to Office 365 without having to purchase additional software? 
    The current configuration we have with Intermedia allows for us to use OWA and our OST files for our current users are cached locally on the workstations. 
    We also do not have any public folders in use.  I have searched the web, but I have not been able to find a definitive answer or steps that I should take to prepare for this type of migration. 
    Any suggestions on this matter would be appreciated.  Thank you.

    It looks as I should be able to from reading that article.  Not sure why the company that want to set this all up for me wanted $12,000 for something I can do with 6 steps.
    Thank you

  • Regarding Batch Jobs for migration of data from client DB to our local DB

    Hi Folks,
    GoodDay, Previously I worked as a Oracle Developer and recently shifted into a BIG organisation as PL?SQL developer. Here my base work is with INTERFACES(Stored Procedure). That is retrieving data from client DB and need to put the data in our staging tables. For that i created 2 INTERFACES(stored procedures). One is for one time migration. No need to run on regular basis. The second one is to run regularly why because if any updations are done in client DB that should be replicate to our DB. For that we need to run a BATCH JOB regulary 24X7 basis.
    But i dont have any working knowledge on BATCH JOB creation and running. Please let me guide on this issue ASAP.
    Regards,
    Ramesh.

    You can try
    dbms_job(9i)
    or
    dbms_scheduler(10g)
    just out of curiosity.. tell me if you are interested...
    what you were doing as a "oracle developer" ( is it like writing only "sql" )...

  • Migrate Small Business Server 2003 to Exchange 2010 and Windows 2008 R2

    I am trying to migrate my server SBS 2003 to win server 2008 r2 and exchange 2010.
     I got error message when trying to install exchange 2010 server.
    Error:
       Installing product E:\exchangserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Error reading from file E:\Setup\ServerRoles\ClientAccess\owa\bin\DocumentViewing\isgdi32.dll.
    Verify that the file exists and that you can access it.'.
    Fatal error during installation

    Hi Mike,
    Error 1603 "Fatal Error" indicates that issues with Media type or Windows installer file not correctly installed.
    I recommend you check the media you are installing. Change ISO files and reinstall.
    Here are some threads for your reference.
    Error 1603 during a new installation
    http://social.technet.microsoft.com/Forums/exchange/en-US/1de7daab-9cdd-4696-8cc4-6b4418be33ca/error-1603-during-a-new-installation?forum=exchange2010
    Fatal error during installation. Error code is 1603
    http://social.technet.microsoft.com/Forums/exchange/en-US/a325132a-5e3d-4496-adec-4ccdbb0d6c92/fatal-error-during-installation-error-code-is-1603?forum=exchangesvrdeploy
    Hope it helps.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Install or not install - exchange 2010 update rollup 4 sp3

    Hi guys!
    We have Exchange2010 SP3 with update rollup 2.
    Users with IE11 are having problems with OWA opening only in light mode. I have read on the internet that CU 4 solves this problem but on the other hand this CU makes additional problems with outlook 2007 clients.
    Some of the comments of this issues from other companies are: In Outlook 2007 if you choose to change the current view with Arrange By 'Categories' the following is noticed: - Items that you set unread or read are not changed until you refresh the view
    - If you open an unread email by doubleclicking, it's status stays unread until you refresh the view. - New mail items are not automatically seen until refresh. This is a very annoying issue, and our servicedesk already received a lot of calls for this issue
    Is there any workaround to fix IE11 OWA light mode and not corrupt Outlook 2007 user clients?
    bostjanc

    It happens as MSIE token is removed from the user-agent string in IE11.  This made the Exchange team provide an update on the Exchange side to fix this issue. The workaround is to use Compatibility Mode in IE11 for OWA. As for the fixes:
    2003: Use workaround, no fix will be released
    2007: Use workaround until a fix is released, currently a fix is tentatively planned for release in E2007 SP3 RU12
    2010: Install
    E2010 SP3 RU3 or use workaround
    2013: Install
    E2013 CU3 or use workaround
    O365: Issue is already fixed, no action is required
    Thanks,
    Jason
    Jason Apt, Microsoft Certified Master | Exchange 2010
    My Blog

Maybe you are looking for