Migrate & coexist Exchange 2010 to 2010 in two different site under same domain

Hi all,
The initial plan was planning to coexist Exchange 2010 (old data center) & 2013 (new data center) .
Unfortunately there was a problem of upgrading the existing exchange 2010 sp2 to 2010 sp3 and Microsoft said they don't support this anymore.
So the only plan I can think of is build another exchange 2010 with SP3 (new data center) to coexist with existing exchange 2010 SP2 first then followed by exchange 2013.
I don't see any relevant info on the Internet for the coexistence of exchange 2010 SP2 and SP3. can you please share some detailed steps or info?
The last database upgrade exchange 2010 SP3 is unable to mount server with Exchange 2010 SP2 i.e., there is no database schema upgrade from SP1 or SP2 to SP3. Please check this link :
https://www.youtube.com/watch?v=M4hJfdqTe5s
You may download exchange Server 2010 Service Pack 3 from here :http://www.microsoft.com/en-us/download/details.aspx?id=36768
This Exchange Server 2010 SP3 software may be used to perform a new installation or to update an existing Exchange Server 2010 installation to Service Pack 2 (SP2) level.
Moreover, to migrate the mailbox database from exchange 2010 to 2013, you may consider on this exchange migration tool (http://www.exchangemigrationtool.com/) that can be a good approach for you.

Similar Messages

Migration From Exchange 2010 Hybrid to Exchange 2013 Hybrid Deployment

hi,
I have existing Exchange Server 2010 Hybrid Deployment. Planning to migrate to Exchange 2013. However, while schema update, i am facing some errors/warnings as can be seen in attached screenshot.
I have already checked and current functional level in DC is Windows Server 2003. What could be the best steps to troubleshoot the problems and proceed further with Exchange 2013 installation?
Thanks

Hi Muhammad
Can you please give few more information about your environment so that people around here can help you out
I have existing Exchange Server 2010 Hybrid Deployment - Do you have Exchange 2010 and Office 365 in a
hybrid setup now ?
Are you trying to upgrade your on premise Exchange 2010 servers to Exchange 2013 ?
Or Are you trying to migrate your on premise Exchange 2010 to a different forest to Exchange 2013 ?
You can try the below suggestions-
I would better suggest you to follow Microsoft Exchange Server Deployment Assistant - http://technet.microsoft.com/en-us/office/dn756393.aspx
Also i would recommend you to check the prerequisites for hybrid deployment with office 365
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Cheers !!!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
Exchange 2013.
Troubleshooting:
1. I have restarted the IIS Services
2. I have restarted MSExchangeOWAAppPool.
3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
I would really appreciate if anyone could share their experiences on similar issues.

I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
I recently found the following when I login with a user who is not effected and then logout:
1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
2. However, I get the below listed error message when I logout.
Your request couldn't be completed.
Click here to continue working.
This may have occurred for security reasons or because your session timed out.

Planning a migration from Exchange 2010 to Exchange 2013

Hello,
I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

Hello,
Is there any update?
If
you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

Migrating mailboxes Exchange 2010 to 365, e-mail delivery failed

We are currently in a hybrid configuration with 2010 and 365. I have migrated one mail box to test, but now when I try to e-mail from that box to internal and external users I get this undeliverable message:
Generating server: BY2PR05MB630.namprd05.prod.outlook.com
[email protected]
Remote Server returned '< #5.7.0 smtp;550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain'>'
[email protected]
Remote Server returned '< #5.7.0 smtp;550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain'>'
Original message headers:
Received: from BY2PR05MB631.namprd05.prod.outlook.com (10.141.218.20) by
BY2PR05MB630.namprd05.prod.outlook.com (10.141.218.13) with Microsoft SMTP
Server (TLS) id 15.0.921.12; Tue, 22 Apr 2014 17:46:14 +0000
Received: from BY2PR05MB631.namprd05.prod.outlook.com ([127.0.0.1]) by
BY2PR05MB631.namprd05.prod.outlook.com ([10.141.218.20]) with Microsoft SMTP
Server id 15.00.0921.000; Tue, 22 Apr 2014 17:46:13 +0000
Content-Type: multipart/mixed;
boundary="_000_10047ccea0ec4ac6b152ab717cee271fBY2PR05MB631namprd05pro_"
From: User <[email protected]
>
To: user <[email protected]>
Subject: FW: SRX614042290246126ID -
Thread-Topic: SRX614042290246126ID -
Thread-Index: Ac9eUriGOe4zLpjESEeTsp1IfSBH8AAAAict
Date: Tue, 22 Apr 2014 17:46:13 +0000
Message-ID: <[email protected]ok.com>
References: <[email protected]>
In-Reply-To: <[email protected]>
X-MS-Has-Attach:
X-MS-Exchange-Inbox-Rules-Loop: [email protected]
X-MS-TNEF-Correlator: <[email protected]ok.com>
x-ms-exchange-parent-message-id: <[email protected]>
auto-submitted: auto-generated
x-ms-exchange-generated-message-source: Mailbox Rules Agent
x-forefront-antispam-report: SFV:SKI;SFS:;DIR:INB;SFP:;SCL:-1;SRVR:BY2PR05MB630;H:BY2PR05MB631.namprd05.prod.outlook.com;FPR:;LANG:en;
MIME-Version: 1.0
X-Auto-Response-Suppress: DR, OOF, AutoReply
X-OriginatorOrg: achievesd.org
X-OrganizationHeadersPreserved: BY2PR05MB630.namprd05.prod.outlook.com

Also, since you have tried that for your test environment, how you are proceeding the hybrid migration ?
You can get better help by using
exchange server deployment assistant for hybrid deployment migration which auto configure the all setup according to our exchange environment.
Moreover, here is another appreciable
resource which can be a good approach to proceed migration from exchange 2010 to office 365.

Migrating From Exchange 2010

I am in the process of migrating from Exchange 2010 to Exchange 2013. I have all mailboxes migrated to Exchange 2013 and am ready to eliminate Exchange 2010 in its entirety, but I am unsure about public folders. We have no public folders other
than the default ones generated during the Exchange 2010 installation. I can't find anything in any of the migration guides that explain what I need to do in this case. Do I need to migrate anything, or can I just uninstall Exchange from the server
and ignore the default public folders?

Thanks. We had one person using Outlook 2003 years ago, but that has since been replaced with Outlook 2010. I was able to remove the "Calendar" folder that appeared in the Public Folder Manager (took me a while to see the "Delete"
link) and was able to proceed. It does not appear that I have caused any problems.

Migrated to Exchange 2010, Contacts and Calender gone in WP8

Just migrated to Exchange 2010 from 2003.
In Outlook Everything looks ok, same with OWA (as far as I can tell.
Problems is with Windows Phon 8.
Neither Contacts nor Calendar will synchronize.
Both are empty on the phones, however Emails synchronize with out any problems
Any suggestions where to start looking.
I have tried to delete the accounts on the WP's, and recreate them, with no luck.
The server is a single server.

Ok, done that, here is the results:
RunspaceId                    : 20e39deb-6133-4de1-ad1b-5b982c021f43
FirstSyncTime                 : 2014-07-30 13:39:00
LastPolicyUpdateTime          : 2014-07-30 16:11:40
LastSyncAttemptTime           : 2014-07-30 17:05:08
LastSuccessSync               : 2014-07-30 17:05:08
DeviceType                    : WP8
DeviceID                      : 273D0C36714C16847613DFA08B42FAE1
DeviceUserAgent               : MSFT-WP/8.0.10517
DeviceWipeSentTime            :
DeviceWipeRequestTime         :
DeviceWipeAckTime             :
LastPingHeartbeat             :
RecoveryPassword              : ********
DeviceModel                   : RM-875_eu_euro1_267
DeviceImei                    : xxyyzz
DeviceFriendlyName            : 909
DeviceOS                      : Windows Phone 8.0.10517
DeviceOSLanguage              : Swedish
DevicePhoneNumber             :
MailboxLogReport              :
DeviceEnableOutboundSMS       : False
DeviceMobileOperator          :
Identity                      : office.company.se/Users/my.self/ExchangeActiveSyncDevices/WP8§273D0C36714C16847613DFA08B42FAE1
Guid                          : f2ece819-d8a4-48e3-bbf3-e7c663ed297b
IsRemoteWipeSupported         : True
Status                        : DeviceOk
StatusNote                    :
DeviceAccessState             : Allowed
DeviceAccessStateReason       : Global
DeviceAccessControlRule       :
DevicePolicyApplied           : Default
DevicePolicyApplicationStatus : PartiallyApplied
LastDeviceWipeRequestor       :
DeviceActiveSyncVersion       : 14.1
NumberOfFoldersSynced         : 6
SyncStateUpgradeTime          :

Exchange 2003 with Windows Server 2012 DC's only. Migrate to Exchange 2010.

I have the following situation:
An Exchange 2003 SP2 server in an 2003 FFL and DFL domain with 2 Windows Server 2012 DC's. There are no Windows Server 2003 DC's anymore. Exchange 2003 is still functioning properly, but the eventlog is showing me some errors about LDAP which is unable to
find an old 2003 DC.
I know this is not supported, so we want to migrate to Exchange 2010 as soon as possible.
What is the best way to do this? Will coexsitence still work? Do I have to add an 2003 DC's again?
Please advice. Thank's in advance!

Oh thank GOD I found this thread!
I am facing a similar situation:
http://social.technet.microsoft.com/Forums/exchange/en-US/9a8bc14b-1a45-4b8b-ac3a-38d63e66a7da/exchange-predeployment-analyzer-exchange-2010-compatibility-check-does-not-recognize-windows?forum=exchangesvrdeploylegacy
And this is the first post I have seen marked as an answer by a Microsoft Contingent Staff affiliated person.
Thanks Steve and Simon, you have saved me a bunch of grey hairs.
C.
"Time is an illusion, Lunchtime, doubly so..." - Ford Prefect

Exchange 2010 unable to find objects in child domain via ESM

I am having a problem on Exchange 2010 which relates to mailboxes whose AD account is in a child domain in the AD forest.
We have two domains A & B in the forest. The site which hosts E2010 only has DCs from domain A (root domain). These DCs are set as Global Catalogues.
All Exchange servers (2 x CAS & 2 x Mailbox) installed in Domain A (primary site) can resolve domain B and performing nslookups for domain B on these server displays the DCs installed
in domain B at remote sites.
I am migrating some resource mailboxes with AD accounts in domain B and need to set them up as room mailboxes to enable the auto accept bookings feature.
After migrating the mailboxes via the EMS to set the mailbox as a room, below is the error I get:
[PS] C:\Windows\system32>set-mailbox mtgrm1@domainB
-Type Room
The operation couldn't be performed because object 'mtgrm1@ domainB' couldn't be found on 'DC01.domainA.com'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 9E6F6A1,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
I have also tried using only the alias and the object CN:
set-mailbox mtgrm1 -Type Room
set-mailbox –identity 'domainB/Sitename/ Users/MSX Resource Accounts/Conf MtgRm1 (Video)' -Type Room
but get the same error.
All employee mailboxes from Domain B have been migrated to Exchange 2010 from 2003 and are working with no problems.
I have confirmed domain B has been prepared for E2010 - In the Microsoft Exchange System Objects container in AD there is the global group Exchange Install Domain Servers.
Event ID 2080
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1864). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
dc02.domainA.COM
CDG 1 7 7 1 0 1 1 7 1
DC01.domainA.com
CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
DC03.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
dc04.domainA.COM
CDG 1 0 0 1 0 0 0 0 0
Please note the Out of site DCs are for our Exchange failover site which is currently down due to the storms on the East Coast.
Does Exchange 2010 require a local DC for the second domain installed in the sites which host Exchange? If not, any advise on what else I can look at will be appreciated.
Thanks.

Hi there,
If the questions is answered, please mark it accordingly. Thanks.
Fiona Liao
TechNet Community Support

Exchange Server Dynamic quorum for two AD site

Hello All,
I have some query regarding the Dynamic Quorum issue:
The environment is two Exchange 2013 in first AD site and another Exchange server 2013 on second AD site. So, total 3 node exchange server.
1. Can i configure DAG with dynamic quorum on this scenario?
2. If first site is totally down then second site can work without any interruption.
3. Is there any need manual switchover in this scenario?
4. OWA and outlook can work if first site down?
5. If first site down then second site exchange server db can automatically mounted.
Thanks,
Parvez

Hi,
1. Can i configure DAG with dynamic quorum on this scenario?
By default dynamic quorum will be enabled once the node is added to the DAG
2. If first site is totally down then second site can work without any interruption.
1.sequential failure on dag nodes - first node in dag will go down and after a short time second node will go down .
2.simultaneous failure on dag nodes - majority of the nodes will go down at a time .On your case majority is two.
Dynamic quorum will support sequential failure of nodes and it will not support the simultaneous failure .
So on your case if you perform manual sequential failure on the dag nodes you can make utilize the dynamic quorum feature .
Note : Please refer the below mentioned blog which will give you a good clarity.Like you they have also demonstrated with three nodes.
Reference
blog : http://www.msexchange.org/articles-tutorials/exchange-server-2013/high-availability-recovery/exchange-2013-dag-dynamic-quorum-part2.html
3. Is there any need manual switchover in this scenario?
Yes it is available .You can follow the below mentioned article .Though it is for exchange 2010 but it will support 2013 .
http://smtpport25.wordpress.com/2010/12/10/exchange-2010-dag-local-and-site-drfailover-and-fail-back/
4. OWA and outlook can work if first site down?
You need to point the outlook and owa namespaces to the exchange 2013
server in DR site or else it would be to an LB in DR site.
5. If first site down then second site exchange server db can automatically mounted.
At a time , If the entire site goes down then the automatic failover will not happen ,because
the dynamic quorum doesn't have the enough time to recalculate the dynamic weight.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

Help. How do you post two different sites?

Help. I'm trying to create two different sites and have them have two different names. How do i do that? Anyone...thanks.

Scott:
Welcome to the Apple Discussions. Create both sites in the same domain file.
Each can be published separately if it is the only site with changes (shown in red) and you use the Publish to .Mac menu option. They will be published to the same folder on your iDisk but will have separate URLs.
http://web.mac.com/account name/Site A/index.html
http://web.mac.com/account name/Site B/index.html

Folder is empty on second computer. I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

Hi DeafScientist,
Please try the below mentioned links.
Creative Cloud Help | Browse, sync, and manage assets
Error: "Unable to sync files"
Creative Cloud File Sync | Known issues
Kindly revert if you are unable to sync files.
Thanks,
Atul Saini

Active Directory domain migration with Exchange 2010, System Center 2012 R2 and File Servers

Greeting dear colleagues!
I got a task to migrate existing Active Directory domain to a new froest and a brand new domain.
I have a single domain with Forest/Domain level 2003 and two DC (2008 R2 and 2012 R2). My domain contains Exchange 2010 Organization, some System Center components (SCCM, SCOM, SCSM) and File Servers with mapped "My Documents" user folders. Domain
has about 1500 users/computers.
How do u think, is it realy possible to migrate such a domain to a new one with minimum downtime and user interruption? Maybe someone has already done something like that before? Please, write that here, i promise that i won't ask for instruction from you,
maybe only some small questions :)
Now I'm studying ADMT manual for sure.
Thanks in advance,
Dmitriy Titov
С уважением, Дмитрий Титов

Hi Dmitriy,
I got a task to migrate existing Active Directory domain to a new froest and a brand new domain.
How do u think, is it realy possible to migrate such a domain to a new one with minimum downtime and user interruption?
As far as I know, during inter-forest migration, user and group objects are cloned rather than migrated, which means they can still access resources in the source forest, they can even access resources after the migration is completed. You can ask users
to switch domain as soon as the new domain is ready.
Therefore, there shouldn’t be a huge downtime/interruption.
More information for you:
ADMT Guide: Migrating and Restructuring Active Directory Domains
https://technet.microsoft.com/en-us/library/cc974332(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

I need help with a migration from Exchange 2010 to 2007

Hi All,
I need help migrating mailboxes from a separate forest / domain using exchange 2010 to our Exchange 2007 SP3 servers.. I am following this procedure:
1. On source server, create a mailbox user, test01.
2. On target server, run the following command to move the AD account:
Prepare-MoveRequest.Ps1 -Identity [email protected] -RemoteForestDomainController FQDN.source.com -RemoteForestCredential $Remote -LocalForestDomainController FQDN.target.com -LocalForestCredential $Local -UseLocalObject -Verbose"
3. Run the ADMT to migrate the password and SID history.
4. Run the following command to move the mailbox:
New-MoveRequest -Identity '[email protected]' -RemoteLegacy -RemoteTargetDatabase DB03 -RemoteGlobalCatalog 'GC01.humongousinsurance.com' -RemoteCredential $Cred -TargetDeliveryDomain 'mail.contoso.com'
(Changed all the details obviously)
It gets to 95% and shows this error
01/12/2014 12:47:24 [EX2K10] Fatal error UpdateMovedMailboxPermanentException has occurred.
Error details: An error occurred while updating a user object after the move operation. --> Active Directory operation failed on DC.DC.COM . This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090A85, comment: Error in attribute conversion operation, data 0, vece --> The requested attribute does not exist.
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass3c.<Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox>b__3b()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.RemoteMoveJob.UpdateMovedMailbox()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.UpdateAD(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.UpdateMovedMailbox
OperationSide: Target
Primary (b5373e49-6a06-41f4-990e-27807c7a57f3)
01/12/2014 12:47:24 [EX2K10] Relinquishing job.
Any ideas what i can do about this?

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
Open the problematic user in AD and check the Email Address. Verify if you can open or edit the x400 address. If no, remove the x400 address and recreate it. If yes, ensure that the name is spelt correctly. After that, continue to move the mailbox and check
the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Migrate & coexist Exchange 2010 to 2010 in two different site under same domain

Similar Messages

Maybe you are looking for