Migrate content from Gateway server 2.0 to NW 7.4

Hi All,
We have a migration planned with our client. In the current situation, there is a separate Gateway server 2.0 on NW 7.02 system.
On this gateway server custom developments are done. Now we have to move to cloud solutions where the server available will be NW 7.4 which has built in gateway server. The NW 7.4 is on Linux and Sybase where NW 7.02 is on HP-UX and Oracle database. The database restore/ recovery method is not to be used here. Can we migrate contents from NW 7.02 via transport to the new NW 7.4 system?

I don't think you should have any complexities with moving a request to your system in cloud. At least, your GW developments / any developments in ABAP are independent of underlying databases/operating systems and would have no impact if you are transporting them.
But, there might be some challenges if there are some deprecated methods or features which should be looked at on pure Gateway perspective, however, there should be relevant notes to address such incompatibilities.
Br,
Nadh

Similar Messages

  • How to migrate content from BW 3.1 to NetWeaver 7.0

    Hello all out there,
    For a couple of years I have been successfully using SDN, finding always the right answer to my questions, however in my late assignment things have not been running that smoothly.
    This is my first posting to SDN and I hope any of you out there can give me a hand.
    <b>My Case:</b>
    We are planning to upgrade from BW 3.1 directly into NetWeaver 7.0
    <b>Our previous research within our planning phase has taking us to read:</b>
    •Everything under the Marketplace NetWeaver Upgrade portal (https://websmp204.sap-ag.de/upgradenw70)
    •Upgrade Master Guide
    •Many docs in SDN
    <b>My Question:</b>
    Based on our research, we have a good understanding about the technical upgrade path and the creation of a new landscape. However anything we have read explains about how to migrate our actual Queries, ODS, Web Templates, Infocubes, Update Rules, InfoObjects, etc to the new environment.
    <b>Could you please point me to the right literature, how to guide, migration path, etc; explaining how to migration content from BW 3.1 to NetWeaver 7.0</b>
    Thanks
    Alejandro

    Hi,
    This is more a question for the BI forums.
    Anyway, have a look at
    service.sap.com/upgrade-bw
    BW3.0B upgrade to BI 7.0 question about BI Content 3.1
    /thread/367125 [original link is broken]
    /thread/150068 [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    Eddy
    PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
    Deadline: June 15th

  • How can I migrate data from SQL Server 6,5 to Oracle 8?

    We have a web site based on Microsoft SQL Server 6.5.Now we plan
    to migrate the database to Oracle 8.
    We have redesigned the tables structure and created tables under
    Oracle 8, so we only need to migrate data from SQL Server.
    We've exported data from SQL Server to text files.
    How can we import data from files and restore to Oracle tables.
    Is there a solution which let us to import data for particular
    table columns,not all columns?
    We'll be appreciated if somene can give suggestions.
    Regards
    Michael
    null

    Thank you for your reply.
    I'll try the Oracle sqlloader utility first.
    Regards
    Micahel
    Oracle Migration Workbench Team wrote:
    : Michael,
    : Oracle sqlloader is user for this sort of operation, see
    : Oracle8i Utilities
    : Release 8.1.5
    : A67792-01
    : available online through Oracle Technology Network.
    : The Oracle Migration Workbench can be used to create bcp and
    : sqlloader scripts, though since you have altered the schema
    these
    : scripts would need to be altered by hand after generation.
    : Some thought has been put into redesigning table structures in
    : the Oracle Migration Workbench, but currently it looks like
    this
    : reengineering will be left to be done by other tools, eg
    Oracle
    : Designer, once the SQLServer database has been duplicated with
    as
    : little change as possible onto Oracle.
    : Hope that helps,
    : Turloch
    : Oracle Migration Workbench Team
    : Michael (guest) wrote:
    : : We have a web site based on Microsoft SQL Server 6.5.Now we
    : plan
    : : to migrate the database to Oracle 8.
    : : We have redesigned the tables structure and created tables
    : under
    : : Oracle 8, so we only need to migrate data from SQL Server.
    : : We've exported data from SQL Server to text files.
    : : How can we import data from files and restore to Oracle
    tables.
    : : Is there a solution which let us to import data for
    particular
    : : table columns,not all columns?
    : : We'll be appreciated if somene can give suggestions.
    : : Regards
    : : Michael
    : Oracle Technology Network
    : http://technet.oracle.com
    null

  • Faster way to migrate data from SQL Server to Oracle 10g

    We have to migrate data from SQL Server to Oracle 10 g.
    One particular table on SQL Server has records around 1.25 millions.
    We tried moving data using DTS package, but looks it will take hours with current speed of 300 records/minute.
    This table has TEXT column, which has XML strings stored. I am not sure, if this is the reason for slow migration.
    Would you please suggest better options to migrate it faster?
    Thanks in advance !!!

    Have you tried Migration work bench?

  • Migrate tracks from one server to another

    Hello, I've read a few guides how to migrate tracks from one server to another, but it doesn't help me.
    What I've done:
    1) I've exported my SC from SLD at my old server
    2) Then imported it at my new server
    3) Updated CMS from SLD
    4) Created a track at my new server and added imported SC
    Then I have to import my SC from old server with sources and there is some errors happens for me.
    First option: I have exported my SC from CMS, but the SCA file is about 5kB. I unzipped it and there was ARCHIVESOURCE folder but it hasn't anything seems to be my sources. That file is checked-in successfully through the transport studio, but no sources imported into DTR.
    Second option: I have exported the SCA file by using NWDS. It's exported OK, size ~1.3MB, ARCHIVESOURCE folder with mine sources. But when I try to check-in it, it fails with an error "import failed, because the sources are not contained in the archive
    Could anybody helps me to achieve my task? I stuck with source import.

    Hi Kirill,
    important to know that assembly ALWAYS uses the CONS/ACTIVE workspace for SCA generation.
    If you for instance create a change (an activity), and you activate and release it but you don't import this activity into CONS, then it won't be part of the CONS/active and then due to obvious reasons assembly won't produce the sources either (no possibility to do an explicit activation on cons level as here a force activation takes place at import, but of course the import into cons is a necessary step, because as mentioned assembly uses the cons/active).
    Can you please confirm/deny how this scenario looks like on your end?
    Thank you!
    Best Regards,
    Ervin

  • Migrate Notes from Exchange server 2007 to office 365

    Hi,
    Anyone help me to how to migrate notes from exchange server 2007 to office 365 . My customer having notes on his existing exchange account  . We would like to move notes to office 365 . 
    Please help me or guide me .
    Thanks & Regards,
    Vinoth

    The way you're doing it has two very high hurdles.
    First, you have to get the data out of an offline server and into Office 365.  That's hardly a trivial task.  If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
    Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Migrating Content from a Custom ASP Page to a SharePoint Page Layout. Includes object tags to flash CSS images

    Hi Guys,
    I'm currently getting issues when trying to migrate content from ASP Pages used in a custom intranet developed by a client to SharePoint Pages.
    My current strategy to do so is as per below:
    a. Create ASPX Pages in Page Library with SharePoint Designer
    b. Copy all common resource files needed by the pages within the Pages library. Includes folders for Javascript, CSS, images etc. This way relative address of resources in pages will pick up pages library as default folder
    for resources.
    c. Copy Source Code of Page from Browser by right-clicking ‘View Page Source’/ Copy code from .asp file
    d. Clean the code to remove unnecessary codes from SharePoint Pages.
    At this point page renders without SharePoint Branding.
    However if I apply SharePoint Master Page onto the ASPX page by using Style > Attach > Default Master Page, this generates an Error when the page renders.
    What is missing in this approach or what would be the best approach to migrate the page to SharePoint without code solution?
    Grateful if you could help.
    Thanks 
    Rhyan.

    Hi Rhyan,
    As I understand, you want to create a custom application page in SharePoint 2013.
    If you copy the code in the asp page to aspx page, it cannot work. You should write the new code that can work in the asp file for the SharePoint aspx page.
    There is a similar case:
    https://social.technet.microsoft.com/forums/sharepoint/en-US/0a97820a-59b9-4430-a98c-d2941803c38e/classic-asp-pages-to-sharepoint-pages-migration
    You can create a web application page in the visual studio. You also can explicitly change which master page is used by the application page by setting the MasterPageFile attribute of the application Page element. (For example: MasterPageFile="~/_layouts/applicationv4.master").
    The articles below are about creating application Pages for SharePoint.
    https://msdn.microsoft.com/en-us/library/ee231581.aspx
    http://nikpatel.net/2012/01/20/custom-sharepoint-pages-site-pages-vs-application-pages/
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to only migrate data from SQL Server 2008 to Oracle 11?

    According to our requirement, We need to only migrate data from a SQL Server database to an existed
    Oracle database user.
    1) I tried to do it with SQL Developer 3.0.04 Migration Wizard, But find an issue.
    My SQL Server database name is SCDS41P2, and my Oracle database user name is CDS41P2;
    When I used SQL Developer to do offline move data by Migration Wizard, I found all oracle user
    name in movedata files which gotten by run Migration Wizard
    is dbo_SCDS41P2. If the Oracle user name is not the same as my existed Oracle user name,
    the data can't be moved to my existed Oracle user when I run oracle_ctl.bat in command line window.
    So I had to modify the Oracle user name in all movedata files, but it's difficult to modify them because there are many tables in
    databases. So could you please tell me how to get the movedata files which the oracle user name in them is my
    expected Oracle user name?
    2) I also tried to use the 'copy to Oracle' function to copy the SQL Server database tables data
    to the existed Oracle database user. When clicked 'copy to Oracle', I selected 'Include Data' and 'Replace' option
    But I found some tables can't be copied, the error info is as below:
    Table SPSSCMOR_CONTROLTABLE Failed. Message: ORA-00955: name is already used by an existing object
    Could you please tell me how to deal with this kind of error?
    Thanks!
    Edited by: 870587 on Jul 6, 2011 2:57 AM

    Hi,
    Thanks for you replying. But the 'copy to oracle' function still can't be work well. I will give some info about the table. I also search 'SPSSCMOR_CONTROLTABLE' in the target schema, and only find one object. So why say 'name is already used by an existing object'? Could you please give me some advice? Thanks!
    What is the 'Build' version of your SQL*Developer ?
    [Answer]:
    3.0.04
    - what does describe show for the SPSSCMOR_CONTROLTABLE in SQL*Server ?
    [Answer]:
    USE [SCDS41P2]
    GO
    /****** Object: Table [dbo].[SPSSCMOR_CONTROLTABLE] Script Date: 07/18/2011 01:25:05 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[SPSSCMOR_CONTROLTABLE](
         [tablename] [nvarchar](128) NOT NULL,
    PRIMARY KEY CLUSTERED
         [tablename] ASC
    )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    - what does describe show for the SPSSCMOR_CONTROLTABLE in Oracle ?
    [Answer]:
    -- File created - Monday-July-18-2011
    -- DDL for Table SPSSCMOR_CONTROLTABLE
    CREATE TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE"
    (     "TABLENAME" NVARCHAR2(128)
    ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ;
    -- DDL for Index SYS_C009547
    CREATE UNIQUE INDEX "CDS41P2"."SYS_C009547" ON "CDS41P2"."SPSSCMOR_CONTROLTABLE" ("TABLENAME")
    PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ;
    -- Constraints for Table SPSSCMOR_CONTROLTABLE
    ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" MODIFY ("TABLENAME" NOT NULL ENABLE);
    ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" ADD PRIMARY KEY ("TABLENAME")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ENABLE;
    Edited by: 870587 on Jul 18, 2011 1:42 AM

  • Migrating content from an encrypted Time Machine external disk (will not easily work)

    I recently purchased an SSHD to upgrade my Mac. I preferred not to completely restore from Time Machine, but rather to install a new copy of Mavericks on the new disk and then migrate my TM content afterwards. At the end of installation, Mavericks proposed the option to migrate data from a TM backup, which I chose.
    It turns out that the Migration Assistant did not recognize any disk, perhaps because it was encrypted, nor displayed any way to select the volume and unlock it by entering its password. Despite what Pondini says the Time Machine backups disk was not seen by the Mac: as workaround I had to create a fictitious user, log in, unlock the disk (that was immediately recognized by the system) and then run the Migration Assistant from there (by the way, after 4 hours I finally logged into my migrated account and found out that apps were not imported at all!)
    I find all this quite not…applish! I could have preferred to unencrypt the TM disk rather than
    Is there anyone facing this same experience? Hope that this, if it's a bug, will be fixed, otherwise I'll have to make a TM backup on a secondary disk (which I don't own so big).

    Well a google search would appear that disk utility will show you the disk regardless if it's mounted or unmounted. you're best bet would be to unmount the disk in finder, shut down the computer completely, unplug it from a power source, and then unplug the firewire...
    I think this is your safest bet but then again, I'm not that worried about ejecting my disks.
    you get no error messages when you right click and eject the disk in in disk utilty? you said you have a my disk, do you mean My Book by western digital? I know that they load software onto the machine for encryption purposes. have you tried ejecting the disk from there? I uninstalled said software so I can't tell you if there is an option for that or not.

  • Process for migrating CMSDK from one server to another

    All:
    We are in the process of migrating our CMSDK installation and database from one server to another. In doing so, we would like to retain our documents and folders and other custom objects that have been created till date. If there is a recommended migration process that you could point us to, it would be greatly appreciated.
    Our initial thought is to:
    1. Install the CMSDK server on the target server machine
    2. Export source CMSDK schema from source database server
    3. Import source CMSDK schema into target database server
    Are we on the right track? If so, are there any pitfalls and issues we can expect to encounter. Any information will be very helpful.
    Thanks

    The utility should help you a lot. The best documentation on how to use the utility is in the 9iFS Setup and Administrators guide (doc number A95995-01) Chapter 8. It pretty much works the same way then as it does now. These are two metalink notes on doing the export/import silently (29928.1 - 177816.1). Doing it silently is very tedious since you having to create numerous .def files and other scripts to run them.
    I will look around for any other stuff I have, but the 9iFS document is very good as a reference no matter what version of CMSDK. If you have problems finding it, I can try to send it to you, but it is around 5.6M.

  • Can't download content from Distribution Server on Android

    I've compiled an app using the Android option from the Adobe Viewer Builder.
    Everyhting works fine even installing it on and Android tablet but at the moment of downloading the content from the Distribution Server, the progress bar doesn't move and it shows the legend "Waiting" and starys there forever..
    Any ideas what could be hapenning?

    Hello John:
    Thanks for your reply.. I did Publish the folio and I CAN download it really fast on the Distribution Server and watch it fine on the iPad but when I try to download it the same folio on the Staging Server, no luck yet, even both have the same size (and HTMLResourcez.sip file either)
    Any further ideas??

  • Reg. Migrating data from SQL Server 2000 to Oracle

    Hi All,
    I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
    Could you guys find any tool for the same.
    Please do the needful.
    Thanks & Regards,
    Prathap

    hi dermot,
    it's very urgent now. Can you please give any solution for this.
    and also i tried the SQL developer tool. But i got an below error,
    Error starting at line 2 in command:
    CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:2 Column:45
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 3 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 4 in command:
    CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:4 Column:45
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 5 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 6 in command:
    CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:6 Column:49
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 7 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 8 in command:
    connect dbo_testdatalatest/dbo_testdatalatest;
    Error report:
    Connection Failed
    Commit
    Regards,
    Prathap.R

  • Issues Migrating Data from SQL Server to Oracle

    Good morning, I'm currently trying to migrate data from a SQL Server 7 Database to Oracle 11GR1.
    I've followed the steps outlined in the guide that's on OTN and for the most part it worked well, the Data Model Capture, transformation and generation worked fine but when i try to do an online data migration the parallel DataMove threads stop working, i have no errors at all on the migration log they just don't pickup new tables to migrate data.
    After looking at the last tables they tried to migrate i noticed that this happens when the table has a text, timestamp or image column on Sql Server which translate to CLOB, RAW[50] and BLOB columns on Oracle.
    I'm i missing something here or just flat out doing something wrong with these datatypes?
    Oh btw i'm using SQL Developer 2.1 December Edition plus the jtds 1.2.5 drivers for SQL Server.

    As you don't have an error message it is difficult to diagnose. You could perform the offline data load for those failiing tables and continue to use the online method for all others.
    Another option would be to log a service request and to provide some demo data to analyse the root cause.

  • Migration databases from one server to another

    Hi All
    I want to migrate our 8 production databases from one server to another server. these are in RAC .Details are below
    OLD SERVER: -
    OS: REDHAT LINUX 3
    ORACLE: ORACLE 10gR1
    FILE SYSTEM : OCFS
    STORAGE: SAN
    Its a RAC databases
    NEW SERVER: -
    OS: REDHAT LINUX 5
    ORACLE: ORACLE 11g R2
    FILE SYSTEM:ASM
    STORAGE:SAN ( fresh one)
    Its also RAC DATABASES
    So please tell me the best method to migrate 8 databases from old server to another server . all databases size are not more than 50 GB.
    All servers details are above .please let me know if you require any other details
    please reply soon we have to do it on urgent basis

    Since all your databases are small (< 50G), I would recommend using expdp/impdp - http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/expimp.htm - as this will provide several advantages as listed in the document.
    Different Upgrade Methods For Upgrading Your Database (Doc ID 419550.1)
    HTH
    Srini

  • How to Migrate content from a thrid party content management system to WC

    Hi,
    How can we migrate full content from a third party CMS to Oracle Webcenter Content system? Do we have a automated batch file import or any APIs which can accept XML data about the content files and upload to the content items to Webcenter Content.? The main idea is migrate from a old CMS to a new Webcenter Content.
    Any ideas...
    Regards,
    Rahul

    Hi
    You have different ways to do this action.
    - You can use "Desktop Integration Suite" that allows you to copy from your Windows Explorer to UCM like any other shared folder.
    - You can use BatchLoader, that will follow a script that creates this massive import to UCM
    - You can create a Java small client that via RIDC can insert all contents.
    Batch Loading content: http://docs.oracle.com/cd/E21764_01/doc.1111/e10792/c02_processes.htm#CHDDFCHE
    Folders and WebDav: http://docs.oracle.com/cd/E21764_01/doc.1111/e10797/c09_folder_all.htm#sthref715
    Regards

Maybe you are looking for