Migrate COPA into BI7

Hi gurus,
I have implemented COPA but the data source in version 3.x. What would be the best way to migrate this into BI 7 version
Any way to migrate the transfer and update rule into transformation ?
Please advice
Thank you

Hi Sarvana,
Migration of COPA is not different then others.,
you need to follow below steps,
If the Dataflow is from Data source to DSO and DSO to Cube
1) Select DSO to Cube update rule and right click on
        update rule > additional function > create transformation
        This will copy and map all the objects with routine if exist and do
        the syntax check once before activation
2)Then select the transfer rule from Data source to
         DSO to do the same thing as above.
3) Then migrate the Data source , in   this always select the u2018with exportu2019 option which will enable to revert back to 3.x version .. If needed
4)If from one data source many targets are getting updated then use infosource
5) Create DTP for all
Regards,
Ashish

Similar Messages

Migration of 2lis_11_vahdr DS into BI7

Dear Experts,
I have issue with 2lis_11_vahdr data source.
I hope this DS is not support BI7 directly, I relpicated it from R/3 and Migrated into BI7.
Now while converting the existing Infosource into Transformations Iam getting fully mapped Transfermations.
I have installed 0SD_C03 cube also.
I would like to load dats from 2lis_11_vahdr in BI7 with all BI7 option I mean using Transformation method(if content transformation available plz let me know).
Please help me in this...
Thanks,
APC

Hi APC,
1. Select the required source system in the BI content tab.
2. In BI content, select grouping as install objects Before... search for the Cube you want to install and transfer it for the installation.
3. Select the check boxes for the installation of objects.
4. Check Data flow is avaialable properly from Cube>Updaterules>info source>Transfer rules>data source.
5. Then try migrating in the order update rule> Inforsource> transfer rules and then the datasource.
Hope thses steps will help you..revert the migrated data source back to 3.X form and try doing this.
Regards,
Rangz

Migration of 3.5 quries into BI7

Hi,
Our system is updating to 3.5 to BI7. So whille migarting all the existing BW 3.5 quries have to migarte into BI7. Is this necessary , if not then is there any issues wihile we can execute the 3.5 quries in BI7 gui any problems will com.
Could you let me know how do we can migrate the existing quries into new version.
Regards,
Sharma. IVN

HI,
Is this necessary , if not then is there any issues wihile we can execute the 3.5 quries in BI7 gui any problems will com.
-> If you want to use the new functionality provided by BI7 BEx analyzer, it is necessary to migrate the Queries. New functinality such as, drag and drop chracteristics in and out of filter, drill down, etc. It is necessary to migrate the reports from 3.5 to Bi7
Could you let me know how do we can migrate the existing quries into new version.
-> BEx Queries - in order to migrate BEx Queries from 3.5 to 7, open the 3.5 BEx Query using the BI7 BEx Query designer and Save it, this is the procedure to migrate a 3.5 query to a BI7 Query.
BEx Workbooks - for migrating a BEx workbook from 3.5 to BI7, open the 3.5 workbook using BI7 BEx Analyzer and Save it.
Thanks,
Kalyan

Migrate data into new DB?

Hi there,
Is there a way to start with a completely new/clean ZEN 6.5 Inventory database,
and then import/migrate data into it using copies of an older ZEN 6.5 Inventory
database?
Thanks,
Eric

I thought maybe starting with a clean db and then importing/migrating the data
would help with some strange Sybase ASA db server errors. I cannot find these
errors documented anywhere on Novell.
Duplicate index "i$CustomValue#" for table "t$CustomValue"
Duplicate index "i$logdevice$deviceid" for table "t$LogicalDevice"
No unique index or primary key for table "diskusage"
I've already tried running sybindex to no avail.
-Eric
"Marcus Breiden" <[email protected]> wrote in message
news:1nanhbp6jocyt$.[email protected]. .
> On Mon, 29 Aug 2005 14:46:48 GMT, Eric Young wrote:
>
>> Is there a way to start with a completely new/clean ZEN 6.5 Inventory
>> database,
>> and then import/migrate data into it using copies of an older ZEN 6.5
>> Inventory
>> database?
>
> there is no documented way..
>
> you would need to run 2 servers, one with the old, one with the new
> database.. than you would need to create your own sql statements to
> transfer the data..
>
> why?
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Query Migration from bw3.5 into BI7.0

Hi friends,
I need to run the queries in BI7.0 which are in BW3.5. How can we do this and what are the prerequisites.
Thanks&Regards
Shaliny M.

Hi,
Chk out this link....
/message/1969749#1969749 [original link is broken]
/message/2324740#2324740 [original link is broken]
All the queries will work if the peratining objects exists in the warehouse. Other than this there aren't any spl measures that actually needs to be taken care to while running the query on BI 7.0, to my knowledge.
Happy Life,
Aravind

Issue when migrating 3.x queries with 2 structures into BI7

Hi all,
We have a 3.x query where we have 2 structures (one in columns and one in rows).
The Keyfigure is in 'Filter Values' and in each structure, selections and formulas are defined.
The query works fine in 3.x
when i try to 'save as' the query in BI 7 and run it, it gives an error that 'at least one keyfigure must be query'.
we can't change the query layout.
Is it an issue in BI 7?
Is there any SAP Note for it?
Or, is it Functionality in BI 7?
Thanks,
Nisha

Please give us your Sp levels and also the frontend sp levels..

Migrating bookmarks to BI7

Hi,
we are migrating 3.x webtemplates to BI7,we also want to migrate bookmarks can anybody help me in migrating book marks to BI7,related OSS note will be more helpfull.thx&regards.
veeru

Hello,
There are two ways of doing this:
1. '''Firefox Sync''' - if you want to continue using both Windows and Mac versions of Firefox then you can use Firefox Sync to keep your bookmarks and other settings synchronised between the devices. See here for set up instructions: [[How do I set up Firefox Sync?]]
2. '''Export as html and import''' - if you want to move permanently from Windows to Mac then I think the cleanest thing would be to export the bookmarks from Windows to HTML. Follow these instructions: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]] then transfer the HTML file to your mac and import them into Firefox there. Follow these instructions for the import: [[Import Bookmarks from a HTML file]]
I hope that helps. Let me know if not.

Problem in loading of flat file transaction data into BI7

Hi Experts,
I am new to BI7, got in problem in creation of Data source.
I have fields in flat file are:
CUSTID,SREPID,MATID,PRICE PER UNIT,UNIT,QUANTITY,TRANS.DATE
one of the row under the above fields is
C100,SR100,MAT01, 50,CS,5,19991005
Created infoobjects are:
IO_CUSID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
IO_QTY was created with Unit/currency '0UNIT'
In creation of Data source, under field tab system shown extra CS field, I did confuse that which infoobject should be map to this field. At the same time i created IO_QTY with 0UNIT so when i entered IO_QTY under infoobjects column, system automatically created 0UNIT infoobject. I didn't completly understand why one of the unit (CS) sat under the fields column. could you clarify me please.
And also could you please tell me the procedure of creating transfer routine for sales revenue as we didn't have this object in flat file (SS). In earlier version of BW(Addison Wesley Step by Step book) i did this at infosource level. Here i am loading the data without infosource so just i would like to know is it possible to create transfer routine at DS level or do i need to create Infosource in this case. If it is the case also could you please make me understand with procedure to create transfer routine for sales revenue.
Your solutions will be more appreciated with points.
Thank you,
Shri

Hi,
1.Open Administrator Workbench: Modeling, from the menu or using the transaction RSA1
2.Go to Source Systems (File)and Create a new System.
3. Double click on the datasources, create data source
4.Entitle the Datasource, choose Transaction Data as Data Type Datasource
5. In next screen, Go to Extraction , Activate the data source
6.Go to Preview. Press Read Preview Data.
7.Data will be loaded: Save and activate the datasource
8.Go to InfoProvider, go to Info area and create Infocube
9.Entitle the infocube, press create
10.Display all info objects: . Choose your info objects , Move the characteristics and key figure to the infocube by drag and drop adn activate
11.Go to InfoCube, create transformation
12.Click on the Show Navigator button. Match the fields in navigator. Save and activate.
13.go to info provider, your info cube, create data transfer process
14.Choose: Extraction Mode: full
Update: Valid records update, Reporting possible (Request green)
Activate, execute
14.Double click on the data source, Read Preview Data
15.Create an InfoPackage by right clicking on the datasource. Execute the load into PSA.
16.Verify data was loaded into PSA before proceeding with the next step.
17. Execute the Data Transfer Process
18.Monitor the results (Menu: GoTo: DTP Monitor)
19.Try to display the data at the BW Frontend.
Thanks,
Sankar M

Migrating Content into KM

Hello Experts,
we are trying to move the content of entire website into KM ,I am in the process of creating a document which will be given to website owners to tell them what all they need todo on their side to move the content to KM ,it would be helpful if anybody suggest me like what all need to be included in this document like How they have to give the content that can be easily moved in KM repositories?.
Thanks and Regards,
Siva

Hi Shiva,
So from the reply i understand that u will be using WebDAV method for your migration.
But one thing, have u planned your folder structure in KM?
which means all the contents(PDF, which were converted etc),where this will be stored.
I assume u will be primarily using html iViews for your portal.
So along with how you migrate the content u should also concentrate on the folder structure.
This Weblog<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4235">Blog</a> gives an intro on how WebDAV can be used effectively when 1 considers mass upload of contents.
but as u see in the blog, u have 2 create your folder structure before hand.
Award points if found useful
BP

Meetup in Orange County/CA About Migrating content into CQ

Just wanted to let everybody know that we have a presentation on how to automatically transfer a site into CQ on Wed March-20
The meetup can be found at http://www.meetup.com/OC-CQ-Sling-JCR-User-Group/events/106181442/
Would be great to see as many of you there as possible.
CQ 5 - Content Migration Approaches
This presentation describes best practices, techniques and approaches for executing successful content migrations to CQ 5. Learn from three real-world case studies covering large scale content transformations, content restructuring and how to migrate legacy content into CQ 5.
The speaker will be Gaston Gonzalez

Just a friendly reminder, this is a forum where users help other users. It looks like your issue may require a Verizon representative to review your account details. Please contact our customer service team via live chat or email at:
http://www.verizon.com/contactus
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Migrate eCATTs into Solution Manager.

Hi.
For historical reasons all our eCATTs are located in another system than the Solution Manager system.
Since introduction of the Solution Manager, this has always introduced limitations, errors and other challenges when working with testing.
Now I am wondering if anyone knows a method to migrate the eCATT test cases from the other system, into the Solution Manager system?
Thanks in advance!
Best regards
Per Christiansen

Hi Per,
to migrate eCATTs ? It is not necessary that the eCATT have to be in Solution Manager to use them. IN SOLAR_PROJECT_ADMIN you can define per project where the tool should look for same objects like eCATTS, you can say local or remote in an other system, you can say optional or mandatory.
I recommend to store eCATTs in the system with the highest SAP_BASIS, ok SolMan 4.0 has SAP_BASIS 7.0 this is quiet good. Then all infos are stored centrally which also makes sense.
So if you want to transport eCATTs to SolMan, where is the problem ? eCATTs have a package assigned, so you can put them on a transport request and import them into SolMan. If you have stored them as local objects, you can go to SE03 and change the package assignment to a package you can transport. I think this should help you. If you also want to transport the old eCATT results, I think this is not supported
Regards,
Udo

Issue migrating Notes into Yosemite

A few days ago I upgraded my MacBook's OS from Mavericks to Yosemite, and while just about everything data-wise migrated over without a problem, my Notes from the standard Notes app were deleted. I cannot seem to find a way to recover them, and they contain a few pieces of semi-important information I'd like to recover/keep if at all possible. I tried booting the oldest Mavericks version of Notes from my Time Machine backup into Yosemite, but I cannot since it's incompatible with Yosemite. Any attempts to find my data through other methods in Finder (Show Package Contents, etc.) were fruitless; is there anything I can do to fix this problem?

hello,
got same problem: Yosemete upgrade: lost my notes but I dont use icloud, no way to get back infos from time machine? am I lost? ;-)

When a user rasterizes a color image in AI and copies into Excel and saves file the image is BW

When a user rasterizes a color image in Illustrator and then copies it into Excel and saves the file the image turns black and white. I uninstalled and reinstalled the whole suite already, deleted the perference files that i could find. and also look at the rasterizing settings they are the same as mine and another user. Any other things I can try? Where are the default rasterize settings stored at?

You can do a save for web and choose .png or ,jpg format. Uncheck transparency.

Enterprise Portal DC Migration Issue into 7.31

Hi Experts,
I have created one Enterprise Portal DC created in 7.0 into 7.31.
After creating it is building successfully using deprecated dependencies.
I need to resolve those dependency before deploying into 7.31 server?
For the Enterprise Portal DC deploy option is also coming as disable.
Am I doing correctly?
We are using NWDS is EHP1 SP08 PAT0011 and JDK 1.6_0_30.
Dependency:
Need your help.
Thanks,
Patralekha

Hi,
Did you find any deprecated API in class files(*.java), It represents like below image.
Then you have to find relevant jar and replace with a new one.
Second option is to create new external library with required jars(Replace deprecated jars with new jars) and give reference to existing dc.
Regards,
Surya.

Migrate Metadata into KM

We have a large amount of MS Office documents and PDFs that we are plannning to move into our KM repository. These documents all have metadata stored within the document, i.e. Dublic Core metadata. We want to copy this metadata in the documents to the KM database. For example, we want to copy the Title metadata field of a MS Word document to the Name property of the corresponding document in KM.
Has anyone else done this? Could you recommend how?

Hi Andrew,
I was involved in similar kind of activity in last year.
I followed below activities to mass upload the documents to KM and set metadata properties.
1) Design folder hierarchy on local system and moved respective documents to the folders
2) Manually collected all the meta data of those documents in an excel sheet.
(optional : I used VB script to convert these metadata into XML file )
3) Drag the Folder ( i.e. is created in local system) to the KM Folder using WebDAV.
4) Create KM Application which take XML/excel file and parse the XML/excel file and used KM API's to set meta data of those documents.
Hope this will give you some clue to your solution.
Regards
Sai Krishna Reddy

Migrate COPA into BI7

Similar Messages

Maybe you are looking for