Migrate CUCM v7 to V10.5

Dear all
I have a CUCM version 7, I want to migrate version 10.5 but i failed. I make a PCD for migrate but CUCM version 7 have error Invalid path specified for floppy destination when export configuration CUCM.
I do same document and file boot in fresh_install is: UCSInstall_UCOS_UNRST_10.5.2.10000-5.sgn.iso
Please help me?
Thanks

Interesting, I only found reference to a similar issue and the bootable image was corrupted, did you verify the MD5 checksum for it???

Similar Messages

Problem migrating CUCM 7.1.5 to 9.1(2) (Jump Upgrade)

Hello all,
I am facing an issue when trying to upgrade from CUCM 7.1.5.30000-1 to 9.1(2) over UCS following the jump upgrade procedure.
I have installed 7.1.5 CUCM software on the UCS using the 9.1(2) ova. (two nodes cluster), and after that restored the CUCM backup.
I have loaded "ciscocm.refresh_upgrade_v1.3.cop" file before the upgrade on both nodes.
The connectivity with NTP server is good.
The upgrade file I am using is "UCSInstall_UCOS_9.1.2.11900-12.sgn".
The installation begins on Publisher but after three hours and when it is ending it fails. I have checked the installation logs and this is what it shows:
05/23/2014 17:45:51 component_install|(CAPTURE) Fri May 23 17:41:46 2014 cm-dbl-install DEBUG: cm-dbl-install [0]|<LVL::Debug>
05/23/2014 17:45:51 component_install|(CAPTURE) Fri May 23 17:41:46 2014 cm-dbl-install DEBUG: <--|<LVL::Debug>
05/23/2014 17:45:51 component_install|File:/opt/cisco/install/bin/component_install:756, Function: exec_progmeter(), /opt/cisco/install/bin/progmeter failed (1)|<LVL::Error>
05/23/2014 17:45:51 appmanager.sh|Internal Error, File:/usr/local/bin/base_scripts/appmanager.sh:269, Function: refresh_upgrade(), failed to refresh_upgrade infrastructure_post components|<LVL::Critical>
05/23/2014 17:45:51 post_install|File:/opt/cisco/install/bin/post_install:911, Function: install_applications(), /usr/local/bin/base_scripts/appmanager.sh -refresh-upgrade failed (1)|<LVL::Error>
05/23/2014 17:45:51 post_install|Exiting with result 1|<LVL::Info>
05/23/2014 17:45:51 post_install|INSTALL_TYPE="Refresh Upgrade"|<LVL::Debug>
05/23/2014 17:45:51 post_install|Process refresh upgrade failure|<LVL::Info>
05/23/2014 17:45:51 post_install|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
05/23/2014 17:45:51 post_install|Retore grub.conf from grub.conf.recovery|<LVL::Info>
05/23/2014 17:45:51 post_install|Copy recovery file, /grub/boot/grub/grub.conf.recovery, to /grub/boot/grub/grub.conf|<LVL::Debug>
05/23/2014 17:45:51 post_install|Retore of grub.conf complete|<LVL::Info>
05/23/2014 17:45:51 post_install|Invalidate upgrade partition|<LVL::Info>
05/23/2014 17:45:51 post_install|Removing master RPM|<LVL::Debug>
05/23/2014 17:45:52 post_install|Removing /etc/opt/cisco/install.conf|<LVL::Debug>
05/23/2014 17:45:52 post_install|Invalidate any product configuration file|<LVL::Debug>
05/23/2014 17:45:52 post_install|Setting product and deployment version attributes in /etc/opt/cisco/install/conf/callmanager_product.conf to 0.0.0.0000-0000|<LVL::Debug>
05/23/2014 17:45:52 post_install|Cleanup refresh upgrade staging areas|<LVL::Debug>
05/23/2014 17:46:14 post_install|Parse argument status=upgrade.stage.error|<LVL::Debug>
05/23/2014 17:46:14 post_install|_set_upgrade_status_attribute: status set to upgrade.stage.error|<LVL::Debug>
05/23/2014 17:46:14 post_install|File:/opt/cisco/install/bin/post_install:580, Function: handle_refresh_upgrade_failure(), Refresh upgrade failed. Trying to reboot to currently active version.|<LVL::Error>
05/23/2014 17:47:19 hardware_check.sh|Initializing hardware library on boot|<LVL::Info>
05/23/2014 17:47:19 ServerApiManager|In main with args -|initialize|- called file |/usr/local/bin/base_scripts/server_api_manager.sh| - and current mode=HSSI_Mode |<LVL::Debug>
05/23/2014 17:47:19 ServerApiManager||Method: initialize args: |- current mode=HSSI_Mode completed with code [0]|<LVL::Debug>
05/23/2014 17:47:19 ServerApiManager|In main with args -|initHardwareLibrary|- called file |/usr/local/bin/base_scripts/server_api_manager.sh| - and current mode=HSSI_Mode |<LVL::Debug>
05/23/2014 17:47:19 ServerApiManager|Sam_reset being called|
I think it is similar to this other case: https://supportforums.cisco.com/discussion/12181161/cucm-vm-715-912-migration-error#comment-9719721
Can anyone help me with this? I am stuck on the migration.
Thanks!!
Héctor

Just for the record. I found the solution to my problem. Checking more logs I read this:
The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
"/usr/local/cm/script/cm-dbl-ontape_backup-install RU PostInstall 9.1.2.11900-12 7.1.5.30000-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " terminated. Exceeded max time (240)
The system will now halt.
So I accessed the Dissaster Recovery Section on CUCM and deleted the tape backup device that was configured there. After deleting it the upgrade went well.

Migrate CUCM 8.5 to 10.X from MCS server to UCS

Dear All,
Can you please explain me how can I migrate my current CUCM 8.5 running on MCS server to newly purchase UCS server on CUCM 10.x.
Regards

Best option would be to use Cisco Prime Collaboration Deployment
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/10_5_1/CUCM_BK_U35347D2_00_pcd-administration-guide-1051/CUCM_BK_U35347D2_00_ucmap-administration-guide-1051_chapter_0100.html
many threads on it across the forum.
Chris

Migration CUCM - BE 5K to BE6K

I think I allready post on that and I got different answer somewhere else..
Anyone did a CUCM migration from 5K to 6K
We know for the unity we can user the Cobra but for the CUCM I think we cannot do a CUCM backup and Restore from DRS because the platform is totally different.
Anyone got experience with that and would like to share ?
Regards,

For the 5k to 6k they created a document for bulk / cobra. It's nothing reeally different, it's a regular export ..but it may be usefull
document provides step-by-step procedures to migrate from Cisco Business Edition 5000 to Cisco Business Edition 6000.
https://supportforums.cisco.com/docs/DOC-34720
Migration from Cisco Business Edition 5000 to Cisco Business Edition 6000First Published: May 1, 2013

I need to migrate CUCM 8.6.2 from 6.0.1 but don't have any DVD of old 6.0.1

Dear Experts,
I have new project which has been abandon for long and assigned to me recently.
I know what is the steps we need to work.
1. DRS from current CUCM version
2. Install same version of 6.0.1 to new Server
3. Backup from step1.
4. Upgrade to 8.6.2(it is not direct support, so I have to upgrade to middle version first)
But customer doesn't have current CUCM(6.0.1) version of DVD and I cannot find the version from Cisco site as well.
1. Can I export BAT from old version and import BAT to new version ? will it work ?
2. I don't have any bootable version either of old or new, so I need to make bootable after download from Cisco site.
I googled and some site said I can copy bootsector from bootable DVD and copy to new DVD, in this case even though it is not same version, for example, if I copy from 10.5 version and copy to 8.6.2, does it make bootable DVD ?
3. How can I remove all configuration on CUCM ? is it CLI command if I can ?
Thanks in advance
Jason

Hi Jason,
There is a way, however if you got into any bad situation or needed any help during the process TAC WILL NOT be able help.
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
Try this method, and you should be able to create bootable DVDs from non-Bootable ones.
Secondly, you may raise a TAC SR and request them to release the Bootable media for 6.0.1
HTH

Application Migration (v3.2.3 v10.1.3)

Hello,
I'm currently trying to migrate an application from JDev 3.2.3 to JDev 10.1.3.
JDeveloper marks the migration as successfull, but the application doesn't contain all the projects and I can't add them one by one.
When the application is opened and migrated in JDev 9.0.3, the application does contain all the projects.
Thanks in advance.
Koen

I would recommend going from 3.2.3 to 9.0.3.4, then from 9.0.3.4 to 10.1.2, then from 10.1.2 to 10.1.3.
It should be enough to just open the workspace in each later release, then do Save All.
For some apps using ADFBC data tags, I've found it useful to pass "through" 10.1.2 on the way to 10.1.3 in my experience.

Data Export error when migrating cucm cluster on version 7.1.5 to cucm 10.0

Hi
Has anyone come across below? If so any suggestions for workaround?
01, 2014 11:54 PDT
   STATUS
    The task has been scheduled.
Oct 01, 2014 11:54 PDT
     INFO
     Export task action ID #154 with 1 node(s) scheduled.
Oct 01, 2014 11:54 PDT
STATUS
           The task has started.
Oct 01, 2014 11:54 PDT
    INFO
    Export task action ID #154 with 1 node(s) started.
Oct 01, 2014 11:54 PDT
   INFO
    Export job for node xx.xx.xx started.
Oct 01, 2014 12:09 PDT
   ERROR
   Data export failed for node xx.xx.xx.
Oct 01, 2014 12:09 PDT
ERROR
    Export job for node xx.xx.xx failed.
Oct 01, 2014 12:09 PDT
   ERROR
    1 nodes(s) in Export task action ID #154 failed: xx.xx.xx
Oct 01, 2014 12:09 PDT
   ERROR
    Task paused due to task action failures.

Hi,
you can login PCD through putty for seeing the logs
file list activelog tomcat/logs/ucmap/log4j/ detail date
further, run
file tail activelog tomcat/logs/ucmap/logs4j/ucmap00001.log[for example]
regds,
aman

Prime Collaboration Deployment 10.6 Migrating CM8.x to an existing CUCM 10.5 cluster?

Quick and easy one hopefully:
Can PCD assist with migrating CUCM 8.6 to an existing live CUCM 10.5 ? Suspect not but fingers crossed :)
Rich

Only upgrade files are available under downloads at cisco.com, fresh install ISO only comes with the 10.x media kit you need to order via PUT

CUCM 8.5.1 support CUE 8.6.7

Hi,
I am currently running cucm 8.5.1 and cue 8.6.1 in phone system and now I am looking to migrate cucm to 9.1 verison.
Becuase cucm 9.1 does not support CUE 8.6.1 so I need upgrade cue to 8.6.7 verion.
My planning is upgrade cue first and after that upgrade for cucm but I don't know is whether cucm 8.5.1 provides supports for cue 8.6.7 or not?
please advise!
(sorry my English is not good)
Best regards,
Tan

Hi Tan,
Jaime is correct, please check the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html
It provides the details of compatibility of CUE 8.6.7, it is supported with CUCM 8.5.
HTH
Manish

Upgrade CUCM 9.1 (BE6K) to CUCM 10.5

Hi All,
We are facing the process to update CUCM and I&M on a BE6K platform from 9.1 version to the latest one (CUCM 10.5),
The UCSS is still valid.
Could someone put us on the right direction?
Is Expressway Core and Edge already included if my CUCM upgraded to v10.5?
Thanks in advance.
Regards

Recently I've contact and ask Cisco Licensing Team to Upgrade my CUCM 9.1 to CUCM 10.5,
and they said that my case is an "ordering issue".
Do I need to order some SKUs from CCW before I can upgrade my CUCM?
What SKUs that I need?
Please advise,
Thanks,
Regards,
Ovindo

Software and platform Migration

Hi all,
Greetings
I am planning to migrate CUCM 8.6 to CUCM 9.1 and changing the platform MCS to VMware ESXi 5.0.
This is my individual project doing overseas first time, My client location is Sudan Khartoum, When I gone through some pages got the below quries
1. Restricted / Unrestricted version of CUCM (Which is preferred for Sudan country)
2. Export and Contract Compliance ( Is this mandatory)
3. Any other Cisco recommended guidance to follow behalf of this location. (Sudan)
Thanks
Nagarajan P

You will need to use the Unrestricted version of the product if installing it in Sudan. Using the Restricted build would violate US Export regulations.
http://www.cisco.com/web/about/doing_business/legal/global_export_trade/general_export/contract_compliance.html
Please remember to rate helpful responses and identify helpful or correct answers.

Call logs are missing after migrating to VM

We recently migrated CUCM 8.6.2 from physical server to VM. Phones are all fine, but some no longer update their Call Logs (i.e. Missing, Recieved, Placed). Doing a Factory reset does a fix for a single phone, but normal reset or reboot doesn't. Can someone think of the possible reason for this?

Can you please try this for one phone check whether its work or not?
** Delete ITL file on the phone
- Go to Settings
- Security Configuration
- Trust List
- Unlock (*##)
- Click on "more"
- Erase ITL file (the phone will be reset by its own)
Br,
Nadeem
Please rate all useful post.

Crystal Reports upgrade

I'm currently looking at the options for migrating off Crystal Reports V10. Two options have been put forward by my IT supplier - Crystal Reports XI and Business Objects XI.
Can anyone offer advice on the Business Objects XI option? Is it easy to 'convert' reports we have already developed/published using Crystal Reports V10? What level of training will the developers need? And do you require a 'business objects universe' (we do not currently use a universe).
Also - what is the correct product name of the latest version of Business Objects for report development?
cheers

Hi Phil,
As you have mentioned that you are using Crystal Reports V10 and also that you are not using the Universe, then you can go ahead with Crystal Reports XI.
THe Business Objects XI comes with the Universe Designer and the other reporting tools such as Desktop Intelligence (DeskI) and Web intelligence (WebI), Import Wizard, Publishing Wizard and Report Conversion Tool etc.
The latest version of Business Objects is Business Objects XI 3.1 and for Crystal Reports is CR 2008.
Regards,
Abhijeet T.

Upgrade Order 9.x to 10.5

We're currently running the below UC applications and I'm trying to determine the best order for migration:
CUCM 9.1.2
CUC 9.1.2
CUAC Enterprise 9.1.1
Does the Attendant Console have to be migrated first? Is anyone running the CUAC 9.x in a 10.x environment? If possible we would like to hold off on upgrading that component until later, but not sure if it's possible.

Thank you Jaime, that's what I figured, but was hoping I could do it last. Also, just to confirm, the CUCM and CUC can be done in either order, correct?

Upgrade 10.5.8 to 10.6.4 server

I´ve upgrade a server from 10.5.8 to 10.6.4 (have done this a few times before, went smoothly before) and I have an issue remaining with the caldav server (I had other issues but got those sorted).
the caldav data on the server gets upgrade to the new directory schema when I start ical. I can login but I dont see any calendars nor events. I can only create a new calendar...
this drives me crazy because I got some users relying on that service and wanting their calendars back! already checked a lot of things (permissions are fine, already tried to reimport the calendar data, deleted .db.sqlite,..) but nothing worked out so far. so if anyone can point me in the right direction I´d be happy!

Hi,
I was referring the discussion which says that ciscocm.version3-keys.cop.sgn is required if same VM/hardware is being used for upgradation.
https://supportforums.cisco.com/discussion/12321346/migration-cucm-713-mcs-105-ucs-using-pcd-cop-files-required
third step u should do after all the servers are upgraded successfully to CUCM10.5.
Licenses u can have after successful migration since u need to share the PLM file to licnesing team.
For unity connection
Supported Version Combinations for Cisco Unity Connection 7.x and Later with Cisco Unified Communications Manager
Cisco Unity Connection
Cisco Unified Communications Manager
7.x and Later
10.5, 10.0(1), 9.1(2), 9.1(1), 9.0(1),8.6(2),8.6(1),8.5(1),8.0(x), 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x), 5.0(x)
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
regds,
aman

Migrate CUCM v7 to V10.5

Similar Messages

Maybe you are looking for