Migrate data for few infotypes

hello Experts,
I have a requirement. I am joining a client and client wants to transfer data for infotypes 0000, 0001,0002 and 1000 and 1001. I want to knw how do i go about it.correct and also please specify if i m technically wrong.
1. create a distrubution model with idoc hrmd_a. I want to knw where can i specify what infotypes i want to distribute.
2. create an ale connection between both the systems using SALE.
now do i need to activate the change pointers?
and how does the program run, i mean when wud be the idoc created and how will it be transferred to other system?
I knw my request is bit vague but any kind of help would be really appreciated>
thanks,
HM

Hi,
at following link there is a step by step guide for Idoc distribution HR.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAALEHR_ALE_QS.pdf
There are also a few other useful pdfs for ALE/IDoc at:
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
In the distribution model you have to create filters. There you could specify which infotype you want to distribute.
Call report RHALEINI to create initial Idocs.
Regards
Bernd

Similar Messages

Logical database PNP not retrieving data for custom infotypes.

Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamza

solved

How to upload data for custom infotype

Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & Roopa

Thanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa

Changed data for OM infotypes

Hi All,
Could anyone let me know if there is any sap standard program which will give all the changed data for OM related Infotypes? I know we have some idoc types which can do this, but I am looking for some standard program.
Please help.
thanks
shyam

Hi Suresh,
Thanks for the information. But I am unable to see any documents in the table T77CDOC_CUST even though I made some changes to the OM data for a particular object. I see that there is a SWITCH in the above table which needs to be activated..I think in my system it is not active..So could you please let me know how can I activate this?
Many thanks

MIgrating Data for Asian countries..

Hi All,
We have a requirement to migrate data from legacy to Oracle Apps for Asia-Pacific countries.
The chalange here is when we tried for China (Lang: Chinese) we used the character sets
Simplified - ZHS16CGB231280
Traditional - ZHT16BIG5
only certain characters are migrated as it is remaining are coming a square boxes as below
�卞�界�典俊��缇��ㄥ�� S.A. DE C.V.
Is there any solution for migrating the Chinese characters as it is?
Thanks in Advance.
Jana

Pl ensure that the file is tranferred to the Linux server in binary mode.
What are the locale settings on Linux ? Since this is a UTF8 file, the UTF8 locale will need to be installed/enabled.
http://publib.boulder.ibm.com/infocenter/wmbhelp/v7r0m0/index.jsp?topic=/com.ibm.etools.mft.doc/ae19494_.htm
Pl also post details of the loader program - has it been tested to ensure that it loads data correctly into the database ?
HTH
Srini

How to lock the data for few periods in the Input Layout

Dear All,
I have an input enabled layout wherein I will display the data based on a period range.( For ex, 01.2007 to 12.2007).
Now, based on the current period I should disable the input readiness for the periods less than my current period.
In my ex, if my current period is 06.2007, the input readiness should be disabled for the periods 01.2007 to 05.2007 .
How can I achive this?
Regards,
Srini.

Hi Srinivas.
You can use user variable exit for the disabled one (the period one); based on the current period..
You can read regarding it in here:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
Hopefully it can help you a lot.
Regards,
Niel
thanks for the points you choose to assign.

Set default dates for custom infotypes

Hi .
can anyone suggest me to how to set default dates endda and begda to an custom infotypes.
early rsponses heghly appreciate.
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Aug 23, 2011 1:33 PM

If you want the default dates to show when creating or Copying a record, use Customer Exit ZXPADU01

Getting the data for the infotype 0006 and Subtype 4 in HR ABAP

Hi All,
   I need to get the data from the info type 0006 and the subtype 4 , only i need to fetch the data in communications . Could you any one tell me best way to fetch that data.
Thanks,
SAP SAR.

Write a select single on PA0006 for the given pernr begin and end dates and for subtype 4 ...
select single * from PA0006
           where pernr = p_pernr
           and SUBTY = '0004'
           and ENDDA >= s_date-low
           and BEGDA <= s_date-high.

Modifying Cube/ODS data for few entries

Hi friends,
Is there any way to modify few record entries of couple of chars. in either
cube/ODS without actually distrubing the settings.
regards.

Hi Nasiroddin,
    Create a generic datasource based on ODS Active table. Create update rules from this ODS into this ODS only(Loop back).
    Pull data till PSA and edit manually(if records are less) or write some routines to change data accordingly and load except key figures(or map only required fields in overwrite mode).
    Push delta from this ODS to subsequent target, data will be corrected automatically.
Hope it Helps
Srini

HT5313 Lion has been MIGRATING DATA for my email for TWO days and hasnt moved more than 1/16 of an inch!!!

I dont know what to do. running a business on a stupid ipad right now

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

Log data for infotypes

Hi folks,
I have an task that I am trying to resolve, related to log data for the infotypes. I had posed this question earlier too. I did some research to find out an answer for this, but invain. Any help is really appreciated.
The task is: The infotype is 0167 and there are changes made for health plan records(like inserting new plans, terminate the plans). I do not know what the endusers are doing, it is not creating log data for these changes that are happening.
The program's logic is developed in such a way that it goes after these log records from PCL4. I believe it is not a programming issue, it might be some thing else.
I need to find that out to resolve it.
What might be the problem?
Thanks,
SK

It is a standard setting. The infotypes, their field groups and field group charcterstics are defined in V_T585A, V_T585B and V_T585C. I believe the end users are missing some process. Because it started to happen since a week or so. The same program was picking the records fine earlier and it has not changed.
I do not know what kind of process they follow. what changed now? Since I am the only SAP guy out here, got to find it out.
They are using PA30/PA40 to enroll and the web application. Both these records did not create the log data. The reocrds went through to SAP.
Could there be any step they might be missing?
Thanks for the quick reply,
SK

Need advice about migrating data

I just bought my daughter a new MacBook. She launched the Migration Assistant tool to transfer her data from her iMAC. Both computers are running Leopard, and the iMAC is just 1 year old. The problem is that she set up the transfer to go through our home wireless network, which is only wireless G, and the computers indicate the transfer will take 18 hours.
My question is this: Can I just click off the transfer and start another transfer approach that will be faster? For example, when she first started working with the iMAC, we migrated about 25 GB of data from a Windows machine using an external hard drive that was the back-up drive for the Windows machine. This transfer occurred very quickly, well under an hour. Is it possible to transfer the data directly from the Time Machine external drive, which had been attached to the iMAC, to to the MacBook using the USB ports (there is no Firewire port on the MacBook, believe it or not)? I should be able to just copy the data files and paste them into the new MacBook, just as I did when I transferred her data from the Windows maching to the iMAC.
Any comments or suggestions would be much appreciated.
Thanks,
seeker45

seeker,
This KB article has some suggestions for migrating data for the new MacBooks.
[http://support.apple.com/kb/HT1291]
Also, an ethernet cable between the 2 Mac should work great for you. The info below might be helpful as well.
You shouldn't have a problem re-trying the migration again. If Migration Assistant detects duplicate user accounts it will give you the option to overwrite them with the new copies or rename them.
*Using Time Machine Before Initial Launch of New Mac*
Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac. (For Time Capsule/AirDisk users: If you will be attempting this wirelessly, ensure that you are in range of your Airport wireless device. Alternatively, for faster migration of large quantities of data, connect your Mac via ethernet to your wireless device.)
Procedure:
Startup the new Mac and begin the setup process. You will initially see the video introduction.
At “Welcome” select your country and then preferred keyboard.
At “Do You Already Own a Mac?” you are asked “Would you like to transfer your information?”
+from another Mac+
+from another volume on this Mac+
+from a Time Machine backup+
+Do not transfer my information now+
Select “from a Time Machine backup” and click “Continue”.
At “Select a Backup Volume” choose your Time Machine backup disk and click “Continue”. (If you are attempting the migration wirelessly, then click “Join...” and select your network first.)
At “Transfer Your Information” check all the categories you wish to migrate over. If you wish your Mac to be in the same state as your last backup, then check everything. If, however, you are only interested in transferring one user account, then click the little disclosure triangle next to "Users". A list of all the previous users will appear. Just uncheck the user accounts you do NOT wish to migrate over. In other words, have only the desired account checked.
Give the installer time to calculate sizes.
Once that is complete, the “Transfer” button will become active and you can click it.
After the migration, verify the registration information, click “Connect” and you are done.
Once the migration is complete use Disk Utility to repair any permissions issues.
*Using Time Machine After Initial Launch of New Mac*
If you happened to initially set up the new Mac using a different username than the username on the account you wish to migrate, then skip to “Attach the hard disk containing...”.
If, on the other hand, it is the same username as the account you wish to migrate over, then do the following:
Go to System Preferences --> Accounts.
You may need to unlock the lock in the lower left to make changes.
Below the pane on the left click "+" and create a brand new Administrator User account on the Mac with a completely unique name - not the name of your own User account.
Now logout of the account you are currently in and log back in using the new Admin account you just created.
Attach the hard disk containing the previous Macs' Time Machine backups to the new computer. (For Time Capsule/AirDisk users migration will be much faster if you connect your Mac directly to the router via ethernet.)
Now go to Applications --> Utilities --> and launch Migration Assistant.
At the welcome dialogue click "Continue." You may be required to enter your Admin password.
For Migration Method chose "From a Time Machine backup or other disk". (Do not choose…
"Full System Restore" unless it is exactly the same Mac you are restoring to.)
At “Select the System to Transfer” choose the hard disk containing the previous Time Machine backups and click “Continue”. Give Migration Assistant some time as it connects to the drive and scans the disk for eligible data to migrate.
At “Select User Accounts to Transfer” put a check beside each account you would like migrate over to the new Mac.
At “Select the Items to Transfer” you can choose to migrate “Applications” over. If an application already resides on your new Mac, only the newest version will be transferred. Additionally, other “Files and Folders” that resided at the top level of your old Mac can be transferred at this point as well. Files from the “Library” folder of your old Mac will always be transferred over unless you uncheck the other two options.
Click “Continue”.
At “Select Computer Settings to Transfer” choose which settings you would prefer transferring to the new Mac. If you want a completely fresh system to start with, then do not check any of these options. This can be helpful if your previous system was experiencing issues.
Click “Transfer”.
If you have already created a User Account on the new Mac and it happens to be named the same as the User Account that is being migrated then Migration Assistant will report,
+"There is an existing user account with the same name as an account you are transferring."+
At that point, you will be able to choose one of the following:
+• Rename the user account you are transferring+
+• Replace the existing user account with the one you're transferring+
+• Do not transfer this user account+
If you wish the new Mac environment to be exactly the same as your old Mac, then avoid selecting “Rename the user account...”. Rather, select “Replace the existing user account...”. It will not be deleted but saved in a new folder labeled “Deleted Users” found in the main Users folder. Click “Next”.
At this point the transfer will begin with a bar displaying the progress. Once completed click “Quit”.
*Full Backup After Migration to New Mac*
Bear in mind that in all cases Time Machine will not continue to backup the previous Macs’ backup sets but will perform a new full backup. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select the previous Mac’s backup set. You will enter Time Machine and be able to browse your previous back ups and restore files. [http://support.apple.com/kb/TS1338]
Let us know if this resolved your issue.
Cheers!

Getting all data for ESS Pers, Address, Bank & Family screen from SAP 4.7

Hi,
I need suggestions on a weird situation that we have in one of the ESS/MSS project.
Following are the systems that client has: -
      1. Enterprise Portal 7.0
      2. SAP ECC 6.0 -
> (all JCOs in ESS/MSS DCs point to this system.. so in short this system is mapped to Portal)
      3. SAP 4.7            -
> (they are maintaining all data for Pers, Address, Bank & Family here)
      4. Infotype data for some infotypes (such as 0105) are synched between these two SAP systems.
Now, there are some standard + Z fields added in infotypes in SAP4.7 system.
To display Z- fields on Portal, here is what is already done: -
       - Z - RFC is written in SAP ECC6.0 that calls SAP 4.7 to get the data.
       - Standard ESS WD DCs (pers, addr, fam & bank) are edited to call above RFC to display Z - fields.
Now, Client wants : -
      - to display all data from SAP4.7 system on portal (standard as well as Z fields).
      - use ECC6.0 system as a middle box between EP & SAP4.7.. There will be RFCs written in SAP ECC6.0 system that will call FMs in SAP 4.7 and return the data
Now, I don't understand how do I change standard WD DCs that has some standard ARFC models (HRXSS_PER*) written in them.
Any ideas on how to proceed on these objectives?
Please help.
Thanks & Regards,
Amey

Hi Siddarth,
Thanks for reply.
So I have following alternatives ? : -
Option-1 : Sync data between ECC6.0 and SAP4.7 for these Infotypes at regular intervals.
                    (No changes @ ABAP & WD code)
Option-2 : Enhance standard RFCs (such as HRXSS_PER_READ_P0006_FR) in ECC6.0 system to get data from SAP4.7.
                    (Changes @ ABAP side only)
Option-3 : Create custom RFCs in ECC6.0 and import them at WD side and set data in 'SelectedInfotype' node?
                    Then what do we do about standard RFC calls that are already present in these DCs?
                    I am a bit skeptical about this approach.
                    (lot of work in both ABAP & WD side)
Can you please comment?

Reg: T.code to migrate data in Financial

Hi All,
i would like to know the transaction code for create/ migrate data for,
1. GL FINANCIAL TRANSACTIONS / ACCOUNTING DOCUMENTS
2. Direct Invoice
3. Payment document (AP)
4. Asset Transactions
5. Bank Recon - Bank Clearing account
6. Bank Recon - Bank account
7. AR accounting document
now im doing migration for above transactions,
can i use a single t.code / templete to migrate
data. bcoz im using FB03 t.code (FB03 u2013 Display Document)
for displaying.
so my query is that, if displaying FB03 means any other t.code
for all to migrate/create.
is possible, using one t.code to migrate data???
Regards
Arun

Hi Satish,
Actually im wokring in a migration proj. i want to migrate data for above 7 transaction.
n my functional consultant told me that there is a chance may be updating all those transaction
in a single t.code.
is it posible??? bcoz now for viewing all those transaction im using FB03.
regards
arun

Failed to disable contraints: Data Move when migrating data

Get one "Failed to disable constraints: Data Move" error for each table that i try to migrate data for. Using 1.1.3.2766.
* no other errors
* no error detail available
* no explanation given by sql-developer as to cause of problem.
I'm wondering whether this is occuring because the migration process fails to migrate the primary keys and the constraints in the first place. Is it trying to disable something that it failed to create ?

I am having the same problem.
Version 1.2.1
Build MAIN-32.13
Oracle version: 10.2.0.3.0 - 64bit (on Solaris 5.10)
Windows platform: XP Version 2002 Service Pack 2
Is there any update on when this will be fixed, or are there workarounds?
I have 2 (out of 1171) tables that are affected, and in both cases the first two rows are loaded and then it just stops. No errors in the errors column and the only thing in the log is Failed to disable constraints.
Message was edited by:
user591088

Migrate data for few infotypes

Similar Messages

Maybe you are looking for