Migrate data from DPM 2010 to DPM 2012

Hello.
I am currently using DPM 2010. I want to move to DPM 2012, but not as an upgrade. I am using a 20 TB storage pool for nightly backups and tape for weekly backups. The goal of the upgrade is to upgrade the OS as well as DPM, so this will be a fresh installation,
not an in place upgrade. Is there a way to get the recovery point information for tapes and the storage pool migrated into DPM 2012 from DPM 2010?

This topic is closer to system center forum and even there the answer is well beyond the scope. I would recommend
1. MS System Center Guides
2. Survival guides
http://social.technet.microsoft.com/wiki/contents/articles/7075.system-center-2012-configuration-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11414.system-center-2012-orchestrator-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11417.system-center-2012-endpoint-protection-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/8113.system-center-2012-service-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/7809.system-center-2012-operations-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11867.system-center-2012-data-protection-manager-survival-guide.aspx
http://social.technet.microsoft.com/wiki/contents/articles/11415.system-center-2012-app-controller-survival-guide.aspx
3. Book from Packt Publishing
http://www.packtpub.com/microsoft-system-center-data-protection-manager-2012-with-service-pack-1/book
Make experiments on test system before doing changes in production environment.
Regards
Milos

Similar Messages

Migrating Data from MySQL to SQL Server 2012

Hi all,
I'm Migrating a database from MySQL to SQL Server 2012, using SSMA for MySQL v5.2.1258. I've got the schema migrated over and have resolved any migration issues (stored procedures / views), but when it comes to migrating over the data I'm just hitting
a wall.
None of the data is migrating and when the migration report is displayed every table has a red x against it's Status. The Output box has the following:
Data migration operation has finished.
0 table(s) successfully migrated.
0 table(s) partially migrated.
64 table(s) failed to migrate.
I've seen on the forum that someone else was having the same problem
(http://social.msdn.microsoft.com/Forums/en-US/sqlservermigration/thread/b835f4b3-3d93-42a4-9b6b-d21d3dfd8dab/)
I've set the project settings mode to default, still getting the same error and tried using both Client Side Data Migration and Server Side migration, with both giving the same result. I've tried going through the step-by-step blog as well.
I am doing something really stupid? There are 64 tables, so don't really want to try doing exports from each table and importing it into the new database.
Hope someone can help.
Cheers
Alex

Hello,
I don’t have suggestions for you, but you can try contacting the SQL Server Migration Assistant (SSMA) Team via e-mail ([email protected])
to see if they can provide a solution on this scenario.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Frequency migrate data from the operational database SCOM 2012 SP1

What is the frequency with which
information is migrated from the operational database
to the data warehouse database,
are in separate servers and should perform
maintenance tasks such as defragmentation to optimize
disk space, this is recommended?
thank you very much

Hi
Refer below link for data sync from DB to DW
http://blogs.technet.com/b/jonathanalmquist/archive/2010/01/24/how-and-when-is-data-written-or-synchronized-to-the-data-warehouse.aspx
Dataware house
http://blogs.technet.com/b/stefan_stranger/archive/2009/08/15/everything-you-wanted-to-know-about-opsmgr-data-warehouse-grooming-but-were-afraid-to-ask.aspx
Regards
sridhar v

Upgrade from DPM 2010 to DPM 2012 R2

Dears,
is it possible to upgrade DPM from 2010 to 2012 R2.
Thanks

from
https://social.technet.microsoft.com/Forums/en-US/18db5fd3-213b-4d60-b853-646daf780e3e/upgrade-from-2010-to-2012-r2?forum=dpmsetup
I recommend to watch the video to upgrade DPM
Update DPM 2010 to DPM 2012 -
http://www.youtube.com/watch?v=v6hUyg5ePww
Update DPM 2012 to DPM 2012 SP1 -
http://www.youtube.com/watch?v=4VcN1jv_q_g
and read the articles (you can translate using
http://itools.com/tool/google-translate-web-page-translator)
Обновление System Center DPM 2010 до DPM 2012 (текст)
Обновление System Center DPM 2012 до DPM 2012 SP1 (текст)
Обновление System Center DPM 2012 SP1
до DPM 2012 R2 (текст)
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points
DPM blog

DPM 2010 to DPM 2012R2 configuration transfer failure

Hello,
I’m doing a side by side upgrade from DPM 2010 to DPM 2012R2 and I’m trying to transfer my configuration with
Ruud Baar's PS scripts DPMsaveConfig and DPMcreateConfig.
On the new DPM 2012R2 box, when I run DPMcreateConfig it fails.
Here is the end of the log:
“[14:07:30]      Allocating
DPM -Calculate = True for [C:\]...
[14:07:42] Committing protectiongroup [Client Group 1]
[14:07:54] Processing group [Client Group 1] finished
[14:07:55] TRAP: DPMcreateConfig
Exception calling "GetProtectionGroups" with "0" argument(s): "Object
reference not set to an instance of an object."
At C:\DPMcreateConfig.ps1:147 char:2
+     $pg = $srv.GetProtectionGroups() | ?{$_.FriendlyName -eq $xgrp.GroupName}
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : NullReferenceException
Set-protectiongroup : Connection to the DPM service has been lost. (ID: 917)
Review the application event log for information about a possible service
shutdown. Verify that the following services are not disabled:
DPM
DPM Replication Agent
SQLAgent$MSSQLSERVER2
MSSQL$MSSQLSERVER2
Virtual Disk Service
Volume Shadow Copy
At C:\DPMcreateConfig.ps1:358 char:2
+     Set-protectiongroup $2ndmpg
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo
: NotSpecified: (:) [Set-DPMProtectionGroup], DlsE
   xception
    + FullyQualifiedErrorId : UICantConnectToEngine,Microsoft.Internal.Enterpr
   iseStorage.Dls.UI.Cmdlet.ProtectionCmdLets.CommitProtectionGroup “
Any help would be appreciated.
Thanks,
Ivan
Ivan

Hi Buchatech,
Nope, I haven't tried the updated script. I completed the migration manually 9 months ago.
Thanks,
Ivan
Ivan
Ok. I knew this was an old thread. I thought I would respond anyway to make sure you figured it out. I do know that the updated script does not error out on SCDPM 2012 R2.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

How to only migrate data from SQL Server 2008 to Oracle 11?

According to our requirement, We need to only migrate data from a SQL Server database to an existed
Oracle database user.
1) I tried to do it with SQL Developer 3.0.04 Migration Wizard, But find an issue.
My SQL Server database name is SCDS41P2, and my Oracle database user name is CDS41P2;
When I used SQL Developer to do offline move data by Migration Wizard, I found all oracle user
name in movedata files which gotten by run Migration Wizard
is dbo_SCDS41P2. If the Oracle user name is not the same as my existed Oracle user name,
the data can't be moved to my existed Oracle user when I run oracle_ctl.bat in command line window.
So I had to modify the Oracle user name in all movedata files, but it's difficult to modify them because there are many tables in
databases. So could you please tell me how to get the movedata files which the oracle user name in them is my
expected Oracle user name?
2) I also tried to use the 'copy to Oracle' function to copy the SQL Server database tables data
to the existed Oracle database user. When clicked 'copy to Oracle', I selected 'Include Data' and 'Replace' option
But I found some tables can't be copied, the error info is as below:
Table SPSSCMOR_CONTROLTABLE Failed. Message: ORA-00955: name is already used by an existing object
Could you please tell me how to deal with this kind of error?
Thanks!
Edited by: 870587 on Jul 6, 2011 2:57 AM

Hi,
Thanks for you replying. But the 'copy to oracle' function still can't be work well. I will give some info about the table. I also search 'SPSSCMOR_CONTROLTABLE' in the target schema, and only find one object. So why say 'name is already used by an existing object'? Could you please give me some advice? Thanks!
What is the 'Build' version of your SQL*Developer ?
[Answer]:
3.0.04
- what does describe show for the SPSSCMOR_CONTROLTABLE in SQL*Server ?
[Answer]:
USE [SCDS41P2]
GO
/****** Object: Table [dbo].[SPSSCMOR_CONTROLTABLE] Script Date: 07/18/2011 01:25:05 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SPSSCMOR_CONTROLTABLE](
     [tablename] [nvarchar](128) NOT NULL,
PRIMARY KEY CLUSTERED
     [tablename] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
- what does describe show for the SPSSCMOR_CONTROLTABLE in Oracle ?
[Answer]:
-- File created - Monday-July-18-2011
-- DDL for Table SPSSCMOR_CONTROLTABLE
CREATE TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE"
(     "TABLENAME" NVARCHAR2(128)
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- DDL for Index SYS_C009547
CREATE UNIQUE INDEX "CDS41P2"."SYS_C009547" ON "CDS41P2"."SPSSCMOR_CONTROLTABLE" ("TABLENAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- Constraints for Table SPSSCMOR_CONTROLTABLE
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" MODIFY ("TABLENAME" NOT NULL ENABLE);
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" ADD PRIMARY KEY ("TABLENAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE;
Edited by: 870587 on Jul 18, 2011 1:42 AM

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

Migrate data from one table to another

Hi,
I need to move data from work space -1 to work space -2. I need to move only selected data. From work space -1 to work space -2
Work space -1
Table -1_
ID NAME Description
1 xyz one
2 abc two
3 mnk three
Table -2_
ID PID NAME Description
1 1 x1 -
2 1 x2 -
3 2 a1 -
4 2 a2 -
5 3 m1 -
Table -1 is parent table and Table-2 is child. Here PID is parent key of table-1 and ID's in both the table are primary keys.
Now i need to move data from work space-1 to work space -2
Work Space -2 table structure
Table - 1
ID INDUSTRY_TYPE DATE DESC
1 TNT - -
2 MTN - -
Table - 2
ID T_ID NAME DATE DESC
1 1 T1 - -
1 1 T2 - -
2 2 E1 - -
2 2 E3 - -
I need to migrate data from work space -1 of table 1 and 2 to work space - 2 of table 1 and tabe 2
Please suggest me a query to migrate. Please let me know if the steps mentioned above is not clear.
Thanks
Sudhir

Using INSERT statement.
insert into <target table>(<column list>)
select <column list>
from <source table>

HT201250 i bought a new mac, and i want to migrate data from my old pc external drive to my mac how is this done

Just Recently bought a new Mac, because my old PC crashed again, ( finished w/ microsoft) but now i would like to migrate data from my external drive i used on my PC to my new Mac. i loaded the Migration assitant from utilities but didnt see how to migrate the data from this external drive. which is a SEgate drive. any ideas.

Just in case you are not aware of this, you can probably use your external drive, which you presumably now no longer need for your PC, as the backup drive using the Mac's Time Machine. If you still have any Windows specific files that you want to keep, it is really easy to partition the drive so that you can keep Windows files and Mac files in different partitions.

Just reinstalled software and migrated data from Time Machine, now iMac does not recognize printer or camera

Under the direction of Apple Support, I recently erased my iMac (Intel) hard drive, reinstalled and updated software and migrated data from an external hard drive via Time Machine.
Now, after clicking on "PRINT", the print dialog box says "printing" then says "no pages found", and finally says "stopped"; and when I plug in my camera to download photos, the camera is not recognized. Both printer and camera are connected via USB.
I checked connections, verified printing and iPhoto preferences, turned printer off then on again, unplugged and replugged USB connections, and checked and followed directions in the Help menu.

Thanks very much, I'd just tried rkaufmann87's suggestion and entered "This solved my question" when your suggestion popped up—you deserve a "This solved my question" too, though I saw only an option for "This helped me".
Before I got rkaufmann87's suggestion, I repaired disk permissions and that resolved the camera problem. Both of you nailed the solution.
Thanks again!

Migrate data from imac to macbook pro

I want to migrate data from an imac over to a macbook pro. The macbook pro already has data on it which i want to keep on it. I want to make a new user on the macbook pro called "imac" and this user will have all the imacs data stored on it. How can I transfer all this data across and how can i put it into a new user?
Both computers are running OSX Mavericks.

Thunderbolt is even better than Firewire.
Migration Assistant will not overwrite any existing data or existing user account. It will only create a new account and transfer into the new account.
If you wish to move data from your other computer into an existing user account on the target computer, then you don't want to use Migration Assistant. You would use another type of tool such as a standard backup utility or file/folder synchronization tool. I would suggest using Carbon Copy Cloner. Bear in mind that for this to work correctly the usernames of both the source and target accounts should be the same lest you run into permissions problems after the transfers.
CCC will let you specify only what you want to transfer or let you clone an entire volume.

HT4889 Just got a new macbook pro. Trying to migrate data from a MacPro to the macBook. MacBook will recognize the Mac Pro but not vice versa. Using Mac OS X 10.6.8 on the Mac Pro(powermac G4. The Mac Pro searches in vain for the MacBook. What should I do

Just bought a new MacBook Pro. Attempting to migrate data from a power mac G4 running Mac OS X 10.6.8 using a firewire.
Mac Book will recognize the Mac Pro but the Mac Pro just continues to search for the Mac Book. What should I do?
Dave VanHorn
[email protected]

Put the G4 into Target Disk Mode and open Migration Assistant on the new MBP. Your G4 needs to be running 10.5.8.

What firewire cable do I need to transfer data from a 2010 macbook to 2014 macbook

What firewire cable do I need to transfer data from a 2010 macbook to 2014 macbook

You would need a Firewire 800-800 (9-pin) cable and a Thunderbolt to Firewire adaptor.
Matt

Firewire to migrate data from MacBook Pro to imac?

Would someone guide me as to what kind of firewire I need to buy to migrate data from my MacBook Pro (which is two years old, OS X 10.6.8) to an iMac (which is brand new, but also two years old, it's the older model with a 20" screen). I've never even heard of firewire until I turned on the iMac for the first time, so would be very appreciative of guidance. Thanks!

Note if any of the data came from a PowerPC Mac originally, read this tip first:
https://discussions.apple.com/docs/DOC-2295
As that older data if it hasn't been through the Migration Assistant can give the Assistant a big headache.

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

Migrate data from DPM 2010 to DPM 2012

Similar Messages

Maybe you are looking for