Migrate from Boot Camp to Parallels

I've followed the threads about using the Boot Camp partition as a VM in Parallels, but I want to know if there is an advantage to keeping the Boot Camp partition if I doubt I'll ever need to re-boot into Boot Camp. I'm thinking I want to migrate my WinXP installation from Boot Camp into Parallels, and then delete the Boot Camp partition alltogether. How would I do this, and am I just making extra work for myself?

wadelaw wrote:
I may not have been clear before. I want to know the best way to migrate an existing Boot Camp WinXP installation into a Parallels VM. I would rather NOT simply use the Boot Camp partition as a VM.
Hi,
Parallels Transporter http://www.parallels.com/products/desktop/features/transporter/ should do the trick.
Regards
Stefan

Similar Messages

  • Using windows from boot camp on parallels

    i would like to switch from bootcamp to parallels. is there some way that i could use the windows that came with boot camp windows after i switch or do i have to buy a new one?

    One other thing that may not be obvious in Parallels is the update process. I don't know if mine was just weird or what but I got it April 2010 & whenever I checked for updates it said i was up to date. I was a little suspicious that there were no updates in that period. When I began to have trouble I went to Parallels forums & found stickies at the top of general forum giving the lastest builds (updates) for Parallels 4, 5, 6. So since they listed them there I'm guessing it may not always update by checking for them. So the lastest ones are listed there. I think it is supposed to ask when you install if you want to check for the lastest 1. Can't remember if it did for me or not, but I did discover that there were several builds (updates) newer than the 1 I had.
    It was nice being able to run both OS's at the same time. I'm missing it now & looking forward to getting resolution of whatever is causing the problems & getting back to using Parallels.

  • Photoshop 9 Deactivating When Switching From Boot Camp to Parallels....?

    I have Adobe Photosop Elements 9 on my macbook, which I use both in native Boot Camp and in Parallels. I keep getting a window which says "this serial number has already been activated on two machines, please deactivate one of the other machines and retry, or purchase a new licence". The same copy is installed on my home PC. Presumably whenever I switch from Parallels to Boot Camp or vice versa, the Adobe licence check recognises the macbook in its new mode as a third machine, when in fact it is the same BootCamped copy of windows that i am running under parallels. How do I make Photoshop 9 see my macbook as the same machine, whether under Parallels or BootCamp ?

    Randall P wrote:
    I just installed Boot Camp and Windows XP, and things seem to be working well. I'm planning on buying Parallels so I can avoiding rebooting between the two. Do I need to, or should I uninstall Boot Camp? Can I drag the Boot Camp icon to trash to gain back that hard disk capacity?
    You can tell Parallels to use your Bootcamp installation as the virtual machine. You don't need to do anything with Bootcamp then but access it from Parallels. No need to uninstall it. You then can access your Windows without rebooting, or if you want to you still have the option to boot into bootcamp whenever you get the urge to do so.
    No you can't just drag the Bootcamp partition to the trash.

  • Switching from Boot Camp to Parallels

    I just installed Boot Camp and Windows XP, and things seem to be working well. I'm planning on buying Parallels so I can avoiding rebooting between the two. Do I need to, or should I uninstall Boot Camp? Can I drag the Boot Camp icon to trash to gain back that hard disk capacity?

    Randall P wrote:
    I just installed Boot Camp and Windows XP, and things seem to be working well. I'm planning on buying Parallels so I can avoiding rebooting between the two. Do I need to, or should I uninstall Boot Camp? Can I drag the Boot Camp icon to trash to gain back that hard disk capacity?
    You can tell Parallels to use your Bootcamp installation as the virtual machine. You don't need to do anything with Bootcamp then but access it from Parallels. No need to uninstall it. You then can access your Windows without rebooting, or if you want to you still have the option to boot into bootcamp whenever you get the urge to do so.
    No you can't just drag the Bootcamp partition to the trash.

  • Converting from Boot Camp to Parallels

    What is the best way to do this? I don't mind re-installing XP isteslf, but what about my existing apps on the XP partition? What is the best way to back-up for a parallels re-install?
    Cheers
    Dan
    Macbook Pro   Mac OS X (10.4.6)  

    What you are talking about is a Physical to Virtual Migration, which I've done a lot in the Virtual Infrastructure we have at work.. using VMware. and Ultimate P2V.
    The problem is that you have to some how inject device drivers for your Parallels Virtual machine in to a cloned image.. and other than creating the driver injection yourself I don't think there's any scripts out there at all.. since parallels is so new.
    but the answer is, yes you can do it but you will run in to blue screens unless you know how to inject drivers in to your migrated machine... also because XP is usually a single machine license, you will have to reactivate your XP after migration...
    easiest way is to probably create a parallels XP install..

  • Should I Use Boot Camp or Parallels for use of a Windows Desktop?

    I am migrating from a PC to a Mac; I want to take advantage of having a Windows desktop to run some apps until i buy Mac equivalent software;
    I have Tiger, but am installing Leopard this weekend;
    Should I Use Boot Camp or Parallels for use of a Windows Desktop?
    I am tempted by not having to reboot, but i don't want my mac to slow down?
    I am a photographer and use Photoshop and other graphics intensive programs.

    Hi,
    to achieve full computing power while in Windows you have to use BootCamp and for Photoshop and other apps of that caliber in Windows its the best.
    For apps less demanding using Parallels (VMWare Fusion) is sufficient enough and the slight downgrade in speed is negligible.
    You should however (if not already done) max out the RAM of your Mac.
    Regards
    Stefan

  • Installing Windows 7 RC1 with Boot Camp AND Parallels?

    I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
    I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
    If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

    Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

  • Installing Snow Leopard but also Boot Camp or Parallels

    I have a 2006 MacBook (Intel, core duo) and have a 320 gb HD, 2 gb RAM, running 10.5.8.
    I'd like to install Snow Leopard but also would like to partition my HD and install Boot Camp (or Parallels 4.x - I have that version, fully paid etc. but not version 5 of Parallels. Or should I move to Parallels 5 if I move to Snow Leopard?)
    I have a full bootable backup (2) on FW400 LaCie External HD's. I have the SL Original DVD.
    What is the best way to do this? At present I have 60 gb free space (about 20% of the 297 gb formatted total space available).
    Thanks for any comments! Oh, yes - I'm anticipating a new MacBook Pro 13" any time now (Thought the new ones would be out by now!) - Well it will come with SL installed; and I will order one with a 500 gb HD (or larger if available then). Can I migrate my current MB data and files to the new MacBook using migration assistant? But what if I want a partition for BootCamp and Windows (XP likely as I have that)--? Should I partition the new MBP HD first (can I partition it without erasing everything?
    Best regards,
    Steve Schulte
    Sunday 14 March 2010

    Frankly, were you to run Parallels 5 you should have more RAM installed, but your model cannot support more than the 2 GBs you have installed now. You would be better off running Windows via Boot Camp on that machine. However, the new computer will have 4 GBs of RAM installed so it is better suited to running Windows via Parallels. And, yes, if you run Snow Leopard you need Parallels 5.x both for compatibility and performance reasons.
    Open Boot Camp Assistant and click on the wide button on the left to print out the documentation. Read it carefully before using Boot Camp Assistant. Yes, you partition the drive without erasing it, but you can only have one Windows and one OS X partition on the same drive. Otherwise it makes no difference when you use Boot Camp.
    Your XP must be a retail installer with SP2 and only the 32-bit version. You cannot use an OEM installer that came with another computer.

  • "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

    Hi Apple Ppl of the Wrld: I need help I been working on installing windows 8 on my Mac.
    Spec of equipment:
    Mac Book Pro Mid 2012
    Bootcamp Version: Version 5.0.4 (473)
    Bootable USB Flash Drive: Type Scan disk 4 GB windows 8 pro iso image but without the driver and the 2nd Scan disk USB flash drive with 32 GB with the Bootcamp Drivers downloaded and saved to this drive.
    Please Note: I also have the original back up installation disc for Microsoft 8 Prof 64 from Microsoft where I purchased it from.
    1st Bootcamp is not recognizing the Original Microsoft 8 Pro backup disk from microsoft itself.
    Solution: I created the New Image from the Original Microsoft installed disc in my desk top and changed the extension to .ISO then burned the ISO image into the newly purchased DVD+R. Then I ran Bootcamp Once again and it get the following error message "The installer disc could not be found -- Insert your Windows installer disc and wait a few seconds for the disc to be recognized. Solution
    2: Created a bootable usb drive with bootcamp assistant successfully with bootcamp. Yes I close, ejected or un-mounted any image that was open or had been previously used then i restarted the Mac. Next, I start the bootcamp assistant tool once again then i get the same insert your windows installer disc message. 
    3: Then I try to resolve the installer disc not found issue: this are the steps i took: a). Lauch disc utilities
        1. Selected the top most drive 750 GB Macintosh HDD
        2. On the right you’ll see 5 tab buttons: First Aid | Erase | Partition | RAID | Restore.
        3. Choose Partition. Then I clicked + to add another partition size of the partition was 222 GB
        4. Change the Name of the Partition to BOOTCAMP
        5. Change the Format to MS-DOS (FAT)
        6. Click Apply to save the changes and then reboot your Mac and we’ll begin Windows installation.
        7. During reboot, press and hold the alt/Option key and you’ll be presented with drives to boot from.
        8. Use the arrow keys and return button to select the Windows yellow USB key drive containing your Windows 8 installation files.
        9. This will begin the Windows install. --> then i get the following message: "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR".
    4: Take the Mac to best buy and let them resolve the issue and charge me like a million dollars for it :'( since i have no other idea who to get this bootcamp working at all. This has been a terribly lengthy issue and it is not as simple as it is claimed to be since i started with the Original Windows Disc Purchased from Microsoft and I have the Optical disc drive which it should be simpler from what I understand.
    Please can you help It would be of great help.
    <Email Edited by Host>

    from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
    this will not work, it is not an installer disk.
    you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
    next, erase your usb then format it.
    download win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    it is perfectly legal to use your purchased product key in this install.
    in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
    you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

  • I can't start windows 7 normally from Boot Camp

    I can't start windows 7 normally from Boot Camp.
    It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
    Please advice if anything I should do before cleaning up my partition and reinstall Windows.

    I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
    There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
    Restore check points
    Uninstall last update or driver
    Clean the system of debris temp files, caches, registry errors, fonts and left overs
    make sure you have 20% and 12GB free space or more
    A hard shutdown can create more problems.

  • I can´t remove win from my mac because I can´t select the remove option from boot camp assist. Can anybody help me?

    I can´t remove windows partition from my mac because I´can´t select the remove option from boot camp assit. Can any body help me?

    open disc utility choose the drive you need partitioning highlight the bootcamp partition and click on the minus sign at the bottom left.
    after this manually resize your drive by dragging the partition line all the way down and click on partition.

  • Boot Camp For Lion -- USB ISO Method --"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

    Hello, has anyone had experience with dealing with this speciifc problem?
    In short, upon rebooting, I am getting a black screen with a line of text that says, "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR." Nothing happens after that.
    I am using Mac OS X Lion 10.7.4. I have an ISO of Windows 7 Prof. along with an 8GB usb drive. I changed the coding in my bootcamp program to allow for the normally first invisible option that allows creation of a USB Installation program using an ISO that is normally only for computers without an optical drive.
    I have that box checked, the check for new software box, and the install windows box checked. I went through the process of creating the USB, downloading the software, and partitioning the drive. Then on restart, I get the failed to load bootmgr error.
    Some people have suggested using two usb drives for this. I am trying that method but it does not seem to help thus far.
    Can anyone offer any help?
    Thanks.

    from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
    this will not work, it is not an installer disk.
    you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
    next, erase your usb then format it.
    download win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    it is perfectly legal to use your purchased product key in this install.
    in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
    you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

  • I want to use microsoft office on my mac. I need it to run on windows platform. Which is better: boot camp or parallels 7 ?

    I want to use microsoft office on my mac. I need it to run on windows platform. Which is better: boot camp or parallels 7 ?

    Welcome to Apple Communities
    You can install Office for Mac. If you don't want it, Boot Camp uses all the hardware, so it has the best performance for Windows, and Parallels allows you to run Windows in Mac without reboot and without Boot Camp. To use only this, download Parallels

  • Boot Camp or Parallels?

    I'm a new iMac user. I think I might need to run some Windows applications on occasion.
    What do you folks suggest: Boot Camp (that came with the OS) or Parallels? Is Parallels worth the $80?
    Thanks,
    Jeff
    Message was edited by: jla930

    You have to buy Windows separately. This is the case for both Boot Camp and Parallels. However, you can use the same Windows license and run both Boot Camp and Parallels if you choose.
    Parallels is great for convenient casual use. I use it for Quicken, occasional Internet Explorer use, and to run the capture software for my Polar Heart Rate Monitor/Watch. You will probably find that the performance is better than the last Windows machine you used.
    If you want to do graphics intensive gaming, where you want every possible processor cycle available for the game, use Boot Camp. I don't do this, so Parallels has been sufficient for me.
    Message was edited by: AppleMan1958

  • About Boot Camp and Parallels

    Can I use the Windows Xp that I installed by Boot Camp for Parallels?
    In the other hand, Do I need a Windows installation for Boot Camp and other for Parallels?
    Thanks in advance.

    But note that you will need to reactivate Windows when you run it under Parallels for the first time. For this reactivation you will probably need to call Microsoft.

Maybe you are looking for