Migrate from Curve 8320 with OS 4.5

How to migrate data from my Curve 8320 with OS4 to Q10 smartphone? BB Link is only for OS5 and above.

Well, there is no problem syncing the contacts and calendar. Unfortunately, the Link software for the BB10 devices does not sync tasks and memos. For that I recommend signing up for Evernote and transferring that data to Evernote. Then you can integrate Evernote as an Account in the Account settings.
Make sure your old device is sync'd up with Outlook.
Then download and install the Link software for the Q10 and set up the sync.
Do you have an email account somewhere? If so, where? GMail? Outlook.com?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • Problems syncing Blackberry Curve 8320 with Outlook 2007

    Hello all. I have a problem that seems to be somewhat common. I've done some searching through the messages but so far, no luck.
    I just got my Curve 8320 and I installed Desktop Manager 4.5 that came with it. At work, the calendar I want to use is in Outlook 2007. It's a work calendar but this is not a work phone. Anyhow, it wouldn't work at all, but I changed one of the options on the phone (based on a comment here) from "Facebook" to the other option (my personal email, not associated with work or Outlook 2007, but that was my only other choice).
    Then it began pulling records from Outlook to the phone, but approximately half way through it gives me this error under a window called "Intellisync": "The operation terminated unexpectedly."
    I can't get it to go any further than this. Any ideas?
    Solved!
    Go to Solution.

    Morning.
    Let's try this.  Read through this thread.  You probably have a corrupt record somewhere in your calendar.
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=48042&query.id=197058...
    Here's the link to setting up advanced logging:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=1&docTy...
    Thanks for your patience.  Let us know how it goes.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Unable to use Curve 8320 with new pay as you go orange sim card

    Hey everyone. If someone knows the answer to my dilemma, please help.
    My dad just gave me his old Blackberry Curve 8320 Smartphone. He's hardly ever used it and it's been in a draw for a long while, anyway, today I bought an Orange pay-as-you-go sim card for it and having checked the blackberry is all charged up, have now tried it.
    No matter what option I pick on (wizard set-up, help, Call Log and all the others), it comes up with on the screen saying:
    My number
    Then my dad's old number and a six digit number.
    I don't know what to do and neither does my dad, so please help and thanks.

    Welcome to the forums j9wolf
    1. Was the phone previously with Orange? It may be locked to a specific carrier.
    2. Can you make calls with the phone even if it shows the wrong number on there?
    Also take a look at this article for steps to use before buying/selling a used blackberry: http://www.blackberry.com/btsc/KB05099
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • How to use a Wifi connection with a Bluetooth and BB Curve 8320 with a laptop.

    Hello All from Paris - France-
    First soory for my poor english writing.
    My question is simply, I already use my BB Curve 8320 as a modem.
    But what I'm looking is to use my BB Curve 8320 by Bluetooth and use my WIFI connection.
    I did many search but all resultats is using the "modem  provider" and not Wifi connection.
    In advance many thanks and regards.
    Jean-Achille

    Please go to the wireless tab for all the information you need. Click the link below for instructions. Let us know how it goes.
    Checking the Wireless Settings on a Linksys Router
    Connecting a Wireless Computer to go Online Using a Linksys Router

  • Customers who have migrated from 9i EE with Spatial to 10g EE with Spatial?

    Hi,
    My customer is planning to migrated from their 9i EE with Spatial to 10g EE with Spatial. They would like to have an informal discussion with another Oracle customer about best practices, tips, user experiences etc so they can plan for their migration. Oracle Advanced Support will be involved, but they would also like to chat with a customer who has conducted an Oracle EE with Spatial 9ir2 to 10gr2 migration, preferably on a Sun Solaris 9.0 platform. approx 50 gig db.
    Can anybody recommend a customer that we could talk to?
    Thanks,
    Steve.

    Dave.
    There were many discussions on this topic.
    Try use "Search Forum" link and I belive that you find answer what you are looking for.

  • Migrating from and synching with imac

    I am about to purchase the 13'' 2.53ghz macbook pro and will migrate from my iMac. What is the best way to ensure that new work (documents/files) on my macbook pro or my imac is synched with the other machine? Would I use my idisk? If so how? Thanks J

    Hi
    I too have an iMac and a MacBook which I like to keep synced (all documents the same on both machines).
    I would have to second what the first reply says. Use a USB drive or a networked drive.
    I have tried iDisk and quite frankly found it horribly slow and unreliable. If you don't turn on iDisK sync then you only have access to stuff if you have internet access, and if you do turn on iDisk sync it is very unreliable and slow at up loading new files , so I found I could never trust that a file would be there for me when I wanted it next. It is a nice idea, but for me anyway it does not work well enough yet.
    I use a USB stick and just plug it into which ever Mac i happen to be using. This has the advantage for me over a networked drive because I can use it anywhere, I don't have to be connected to my network.
    Of course mobile me will keep data like calendars and address book synced, and I have to say it does a good job there. It keeps this info synced for me across both Macs, an iPhone and iPod Touch. It is just the iDisk bit of things I find a bit clunky and slow.
    Hope this helps
    Paul

  • Migration from external hd with Leopard to iMac Intel

    hi,
    I make two clone of my old iMac G5 internal HD (10.3.9), to an external HD with two partition
    and update one partition to leopard, buyed just for testing all the application CS2 p. and studio 8, all run well!
    Now, i suppose i can use Migration Assistence chosing the external HD, (the one with Leopard and software tested) to import to the new iMac Intel*, what i weiting for, (*just come with Leopard installed),
    without problems or is better a fresh install of CS2 p. and Studio 8, on the Intel unit?
    Thanks for any suggestion
    AleX

    Hi Allan Eckert,
    thanks in advice.
    I buyed CS3 p., so i don't want migrate CS2 and Studio 8 on the Intel unit, but only the user.
    I precise, when i updated one of the two partition of the external HDwd
    i have made TimeMachine on USB external disk, i migrate from here?
    Can you tell me if befoure begin i use the new iMac intel
    must create a new Admin name what must be different from the Admin name
    and user what i must import ?
    Thanks again
    AleX

  • Migrating from old mac with OSX 10.7 to new mac with OSX 10.8

    I've just bought new MacBook Pro which comes with OS X 10.8 Mountain Lion pre-installed. Previously I was using old MacBook with Mac OS X 10.7 Lion (the model which don't support Mountain Lion). I would like to transfer all my data from old computer to the new one using my TimeMachine drive. I assume that after restoring all my data from TimeMachine, I will have Mac OS X 10.7 Lion on the new MacBook, is this right? If so, would I be able to upgrade my system to Mountain Lion later without buying it on the Mac App Store? Or maybe there is a way to transfer all my data from old computer to the new one, preserving currently installed OS X Mountain Lion on the new laptop?

    The reason macjack and tzikowski recommend doing the migration when the computer is booted for the first time is due to how Migration Assistant works. MA doesn't copy Applications & files, it copies Applications & accounts. If you've already logged into your computer, when you use Migration Assistant it will copy your account from your old computer to the new one. Most people have a preferred account name and have already set up their new computer with it so when MA is run and the old account is copied, it has to be renamed. This can be disturbing or disappointing and yes, you can simply delete the first account you made and change the name of the migrated one but the short name isn't changed, just the long name.
    But when you boot the computer for the first time you can migrate before any account is created so the old account is copied to the new computer and your account name remains the same. This is the only difference between Migration Assistant and what's called Setup Assistant in the first boot utility.

  • SAP BW migration from oracle bi with BO

    We have presently Orcale BI with BO and we want to migrate in to SAP BW 7.0 . We have SAP SD,MM,FI,Self service,QM module for reporting with MDM . We have do solution design and rollouts . Is it we require functional people for this project. Is it BO-BI integration project? . We are considering BW,BO,EP,ABAP, basis and function module people . Is it this staffing is correct ?.
    How we can do existing orcale BI with BO to SAP BW 7.0 . we have 46 system as of now and we want to migrate all to SAP BW . What is the approch for this .
    Thanks
    RB

    Hi,
    Recently I have done similar kindly of implementation (Green field)
    Assumption
    Existing report are fixed no more requirement changes
    Best approach
    BODS is more flexible to load data to BW and reduce abap coding by 70% instead of Oracle to BW
    Go by phase wise
    Please kindly see answer are inline
    Is it we require functional people for this project.
    Yes we need them but for touch basis not full time. (At the time of requirement and reconciliation )
    Is it BO-BI integration project? .
    Yes
    We are considering BW,BO,EP,ABAP, basis and function module people . Is it this staffing is correct ?.
       EP no need according to your requirement your are not going by portal
    You may required below stuffing
    Primary stuffing ( one who will be there end to end for project and experience level above 5 years )
    Project Manager/Technical Manager - if he is good in BW ( most welcome)
    BODS(2) - 1. strong knowledge with BW and BODS integration developer and BW knowledge
              2. Database modelling consultant for to split master data and Transaction data and mapping document.
                 (usually oracle has master data and transaction data in single table but bw will have separate table)
    BW(1) -  one Strong Techno functional
    BO(1) -  one strong knowledge with BO and BW integration consultant.
    ABAP(1) - One strong in BW Modelling along with BW ABAP
    BASIS(1)
    BO Admin(1)
    Secondary stuffing (experience level less than 3 years )
    BW(3) - Three Reporting developer
    BO(2) - Two Reporting developer
    ABAP(1)
    Please do let me know
    Regards,
    Manoj.

  • Migrated with time machine.   Had all programs, photos, music, etc.  Today all photos, music and some programs disappeared.  updated with the new software fix.  Can I do the migration from time machine again?

    I migrated from old machine with Leopard to new machine with Lion.  After migration, I had all photos, music, applications, etc.  This morning there is no music, no photos and missing programs.  I have now downloaded the fix they put out yesterday.  Can I simply redo a new migration from Time Machine to get those things back?

    Monty,
    If you used Migration Assistant what has probably occurred is it created another user account. Log out of your current account and see if there is another account, if so log into that one and see if your information is there.

  • Curve 8320 How to read and input Japanese?

    i've got Curve 8320 with UK orange carrier. i've already downloaded Desktop Manager version 4.6 with Media on my PC. I want to know where i can download software for japanese support to my mobile? Orange UK seem doesnt have East Asia or Chinese, Japanese support in https://www.blackberry.com/Downloads/browseSoftware.do
    BlackBerry Handheld Software v4.5.0.75 (Multilanguage)
    Package Version: 4.5.0.75
    which doent include Asian languages. many thanks in advance

    Wireless carriers disfavour that but you can install device os for your device model but from another wireless carrier.
    Check this link: Blackberry OS FAQ
    Find a carrier who provides device OS with asian language support download OS package and install on desktop computer.
    After that delete Vendor.xml from installed files.
    Connect your device to desktop computer and run BB Desktop Manager/App Loader to update the device OS.
    Do not forget to backup all your sensitive data before updating the device OS.

  • Backlight fault on curve 8320

    Hi, I recently bought a bb curve 8320 with a dim backlight, I tried fitting a new screen ( after setting auto backlight to off and 100 ).but the new screen did not work at all and when I replaced original screen I have lost all backlight. I tried another screen from a working curve and had same result. The phone works ok and is up to date with software. can anyone help me please.

    Where were the videos stored, I assume on the Media Card?
    Any details you can offer?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Migration from Reports 6i to AS10g and rwservlet

    Okay, somehow I managed to delete my last post, so I'm trying this again...
    I have a legacy application that I am trying to migrate from Oracle 9i (with reports 6i) to Oracle 10g db and AS10g (running on a Windows 2003 server). Our current reports are being run via CGI (rwcgi60.exe). The oracle documentation says that in 10g this is only supported for backward compatibility and it recommends the use of rwservlet instead.
    I have spent the past two days reading both the oracle documentation and other information I have found on the web. I have turned off SSO, modified the cgicmd.dat file to incorporate our key mappings and have modified the REPORTS_PATH environment variable in the registry. I believe things are configured correctly as I get a response when calling the following URL from a browser:
    https://www.mydomain.com:2121/reports/rwservlet/showenv
    I am also able to generate one of our custom reports by issuing either of the following URLs:
    https://www.mydomain.com:2121/reports/rwservlet?mykey+REPORT=cyprtl+DESFORMAT=PDF+P_ASOFDATE=01/19/2010+P_CLI_CODE=ALS+P_CMU_CODE+TONS+P_FUN_CODE=ALS+P_METRIC_FLAG=N+P_PRO_CODE=ALDENC+P_SESSION=113289+P_TRA_ID=36239+P_TRA_CODE=AS321
    https://www.mydomain.com:2121/reports/rwservlet?mykey&REPORT=cyprtl&DESFORMAT=PDF&P_ASOFDATE=01/19/2010&P_CLI_CODE=ALS&P_CMU_CODE&TONS&P_FUN_CODE=ALS&P_METRIC_FLAG=N&P_PRO_CODE=ALDENC&P_SESSION=113289&P_TRA_ID=36239&P_TRA_CODE=AS321
    The application that we use to generate reports previously submitted the request to the CGI server via an html form (example below). I have modified the code so that the form action is "https://www.mydomain.com:2121/reports/rwservlet?" rather than "https://www.mydomain.com:2121/reports/rwcgi60.exe?".
    <HTML>
    <HEAD>
    <SCRIPT TYPE="text/javaScript">
    function displayRpt() {
    alert ("bozo");     
    document.forms[0].submit();
    </SCRIPT>
    </HEAD>
    <BODY onLoad="displayRpt();">
    <FORM ACTION="https://www.mydomain.com:2121/reports/rwservlet?" METHOD="POST" TARGET="_top">
    <INPUT TYPE="hidden" NAME="mykey" VALUE="">
    <INPUT TYPE="hidden" NAME="REPORT" VALUE="cyprtl">
    <INPUT TYPE="hidden" NAME="DESFORMAT" VALUE="PDF">
    <INPUT TYPE="hidden" NAME="P_ASOFDATE" VALUE="01/19/2010">
    <INPUT TYPE="hidden" NAME="P_CLI_CODE" VALUE="ALS">
    <INPUT TYPE="hidden" NAME="P_CMU_CODE" VALUE="TONS">
    <INPUT TYPE="hidden" NAME="P_FUN_CODE" VALUE="ALS">
    <INPUT TYPE="hidden" NAME="P_METRIC_FLAG" VALUE="N">
    <INPUT TYPE="hidden" NAME="P_PRO_CODE" VALUE="ALDENC">
    <INPUT TYPE="hidden" NAME="P_SESSION" VALUE="113289">
    <INPUT TYPE="hidden" NAME="P_TRA_ID" VALUE="36239">
    <INPUT TYPE="hidden" NAME="P_TRA_CODE" VALUE="AS321">
    </FORM>
    </BODY>
    </HTML>
    Unfortunately, just modifying the form action call does no work on 10g.
    Instead I get the following error messages:
    REP-771: There exist uncompiled program unit(s).
    REP-1247: Report contains uncompiled PL/SQL.
    I do not believe it to be a compilation issue, because as stated above I can invoke the report with the URL syntax.
    Any help would be greatly appreciated.
    -Stephen
    Edited by: user8562081 on Jan 20, 2010 3:21 PM

    Roberto,
    Thanks for the reply, but the issue is not with the port number. After installing AS, I created a virtual host with port number 2121 and secured it with SSL. As mentioned in the post, I can successfully test the report server with the following URL: https://www.mydomain.com:2121/reports/rwservlet/showenv
    -Stephen

  • Migrating from a BB Curve 9320 to Torch 9810

    I am in the process of migrating from a BB Curve to a Torch. How can I transfer my apps for the one to the other?

    Hello,
    For your AppWorld obtained apps, using the exact same BBID is required on both devices...this transfers all things associated to your BBID account from your old device to your new one, including AppWorld purchase/download records. Refer:
    Article ID: KB17625 How to install or transfer previously purchased applications from BlackBerry App World to a BlackBerry smartphone
    Do keep in mind that if the developer of an app has not made a version compatible with your new device/OS level, then it will not be available for installation to your new device.
    For apps obtained elsewhere, you must look to that "elsewhere" to determine how to transfer your apps to your new device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After Migrating from 10g to 11g Geeting problems with Guided navigations.

    After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
    And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
    In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
    We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
    do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

    Hi Both,
    Thanks for the reply ...
    For Guided navigation we are getting like below error:
    Odbc driver returned an error (SQLExecDirectW).
    For Conditional dashboard section we are getting like below error:
    "saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Maybe you are looking for