Migrate from Hyperion 9.3.1 to 11.1.2.1 using LCM utility

Dear All,
I have successfully exported the BI + artifacts in Hyperion 9.3.1 by using LCM Utility..I have got a listing.xml file and also a LCM folder having info and resource in the directory.
My question is that how can i import the extracted object from 9.3.1 to 11.1.2.1 using LCM utility??Where i can create the ImportPackage.xml file??Please let me know the procedure to import into Hyperion 11.1.2.1..
Revert back to me as early as possible...
Regards
Rahul R

Hi Kimberly,
we went through the same uncertain information.
We have been starting fom 9.3.0.1
And YES we had to make the step migrating to 11.1.1.3.
We only performed the schema updates.
Steps in detail:
*11.1.1.3*
Copy Application (HFM)
DB Schema Update 9.3.3
DB Schema Update 11.1.1.3
Export/Import HFM Security
Export/Import (HSS)
Export/Import (HFR)
*11.1.2.1*
ORA DB Data Pump 1:1
Import Schema HFM and HBI
Copy RM1 Folder
Migration Utility for HFM and HFR
Create HSS Schema
Migration of HSS using LCM
We have a picture which describes it nicely. Let me know it you need it.
Regards,
Bernd

Similar Messages

EPM upgrade and migration from 11.1.1.3 to 11.1.2.3 using LCM

Hi All,
We are migrating Hyperion from 11.1.1.3 to 11.1.2.3. Since this cannot be achieved directly,we are planning to upgrade first to 11.1.1.4 and then to 11.1.2.3 using LCM.
Does this upgrade path requires intermediate 11.1.1.4.500 patch to be applied on 11.1.1.4 to migrate to 11.1.2.3 or not?
Thanks

Thanks Harish.
I have gone through the doc but there is no information on whether 11.1.1.4.500 patch is required in EPM upgrade from 11.1.1.4 to 11.1.2.3.
Has anybody done the upgradation from 11.1.1.4 to 11.1.2.3 without the patch 11.1.1.4.500 on 11.1.1.4 successfully? .
Any issues during this upgradation path? please do share.

Is it possible to migrate from Hyperion essbase ver 6 to Hyperion Ver 11?

Hi Hyperion geeks,
is it possible that Migrate from Hyperion essbase ver 6 to Hyperion Ver 11. if yes then pls let me know how we can do it????
reg,
abhishek

Hi,
We're finishing our migration from 6.2 to 11.1.1.3.
Of course won't recommend to migrate directly... they will recommend going through different steps (v7, V9...) => useless I think.
Here what we did :
- Installed v11 (new server)
- copied objects from v6 to v11, tested and validated objects under v11
- for .sec, recreated the app/databases first then copied the v6 .sec on v11 server. Of course your server have to be installed with native securities then you may push to shared services.
- if you don't care about changing password you could handle it with maxl extracts or secman (but I had issues with secman).
Finally it's just like any migration

Migrate from Hyperion using LCM utility in 11.1.2.1, error EPMLCM-37037

Dear All,
I want to import Artifact into HPCM application by using LCM utility.
Error occurred.
EPMLCM-37037: Listing file unavailable for file system repository - C:/Oracle/Middleware/user_projects/epmsystem1/import_export/admin@Native Directory/JICPCM_20120817/resource.
Cannot process application artifact listing metadata. Source.
I have never seen this error before, do you have any idea?
Thanks in advance.
Revert back to me as early as possible...
Regards
Samantha Z

Hello all,
Old thread but I just wanted to leave a comment in case it would be useful for others...
My "folder_to_import" was not in the default location "/Oracle/Middleware/user_projects/epmsystem1/import_export/". I modified the Component.properties file, specifically editing the item "filesystem.artifact.path=D:\import_export_folder" to point to my import folder location. More detail on that can be found at Lifecycle Management Guide)
When attempting to browse the File System through the Shared Services console I was receiving the following error: "EPMLCM-37037:Listing file unavailable for file system repository - D:/Oracle/Middleware/user_projects/epmsystem1/import_export/folder_to_import/RnA-Reporting and Analysis/resource."
The suggested solution of removing any spaces in the listing.xml file didn't help me. What finally solved my problem was changing my filesystem.artifact.path from "filesystem.artifact.path=D:\import_export_folder" to "filesystem.artifact.path=D:\import_export_folder/". Don't really understand why adding the forward slash at the end made the difference but I was able to browse my artifact listing after that change.

Help on Migration from Hyperion Enterprise 6.5.0 to HFM 11.1

Hello All,
We are planning to upgrade our system from Hyperion Enterprise 6.5.0 to HFM 11.1 and would be very grateful if you can help us in answering the below questions as I am novice in Hyperion.
Current Environment:
We have one Hyperion Enterprise 6.5.0 server and Hyperion 6.5 client is installed on two Citrix servers. We use Citrix servers to publish Hyperion client which users can use to access the Hyperion application. I have been planning the Citrix upgrade for Citrix servers and due Hyperion 6.5 incompatibility with Win2008 R2, we are also planning to do Hyperion upgrade to either 6.5.1 or to HFM.
Having no knowledge on HFM, I found out that HFM is web-based application and users can access HFM application through browser unlike Hyperion 6.5 which is accessed by Hyperion client.
I have following question if you can help me, please:
1. Do we need any client to access HFM or all the feature are web based?
2. If it is web-based, do we need any web-server or IIS can be used to provide access to HFM application to users?
3. How many servers (application, web-server, database server etc) would be suffice for 270 users, any estimate?
My questions might be very dumb for this forum but, I would really appreciate and thank any kind of help provided.
Thanks,
Rajneesh

You should not proceed without expertise in HFM. The installation and configuration requires a much greater technical knowledge and support than Hyperion Enterprise does. Also, you should not perform a straight migration of Hyperion Enterprise to HFM since you have to consider the differences in dimensionality. I recommend you engage someone who has already done such a migration and has good experience with HFM.
--Chris

Migrating from Hyperion 9.3.1 to 11.1.2

Dear All,
Can somebody please provide me a detailed method to migrate 9.3.1 to 11.1.2 as per below
1. Hyperion Essbase migration with Partitions
2. Hyperion Planning migration with Business Rules
3.Shared services migration MSAD is used as external authentication
3. HAL migration
Hyperion 11.1.2 installation would be on a fresh server with SQl server 2005.
Kindly send your response.
Thanks
MP

First of all I would spend some time searching this forum about migrations, they have been covered so many times and it is not worth going over and over it again.
Business rules you can export from EAS and then import.
Planning you can copy the schema/db and then migrate (search the planning forum as this has been also been covered many times)
HAL is not supported anymore and it is worth considering moving to using ODI if you have complicated integrations.
Cheers
John
http://john-goodwin.blogspot.com/

Migration From Hyperion Planning v3.3 to Hyperion Planning v11.1.1.3

Hi Friends,
Could you please list out steps to follow from migration Hyperion Planning v3.3 to Hyperion Planning v11.1.1.3.
Thanks in advance
Regards..
Sai.

You can use Oracle Lifecycle Management to help migrate to a newer version. Did you mean to say v9.3 to v11.1.1.3?
Manually you would first create a fresh HP 11.1.1.3 enviornment and application, then export from older version to newer version;
Outline, metadata, members, calc scripts, business rules, forms, reports, ect..... Then you get all of your data loaded, or as much of the data you want or need.
Consolidate and validate.
Mike

Migrating from Informix 9.21 to Oracle 9.2.0.4(Using Existing Tables space)

Hi
I want to create tables & indexes on different tablespaces as planned. I have already created table spaces using OEM. (for a given schema different set of tables have to be created on diffrent tablespaces and so on)
But,it appears,"OMWB Table Space Discoverer" is not much of useful. It allows to specify one for tables, one for indexes and TEMP. Is there anyway I can 'discover' all the tablespaces from the target and assign the tables & indexes to various tablespaces as planned.
Any suggestions?
Rgds
Jeya

Hi,
I was unable to reproduce your problem. I carried out the following steps in attempt to replicate the issue:
1. I launched the workbench, version 10.1.0.2, selecting the Oracle Lite "Default Repository".
2. Using the Oracle Enterprise Manager Console, I created a user "rtdb" with the password "rtdb" on my target Oracle 9i database.
3. I captured a test Informix database, generating its source and oracle models.
4. I then proceeded to migrate the database to Oracle and supplied my target Oracle9i database information in the "Migration Wizard, Step 1 of 4: Destination Database Details", supplying rtdb/rtdb as the username/password.
5. My test database migrated with no such error messages reported.
If you carried out the migration steps as I have outlined above, and are still experiencing issues with a "Failed to connect" error, I would contact support.
Regards,
Hilary

DRM migration issue. Migrating from 11.1.1.3 to 11.1.2.1 using the Reposito

When running the repository wizard, we get the following message during the schema copy process: RM_USER -Table does not have a primary key.
Once that message displays the process halts. We checked the RM_USER table and it does have a primary key.

I would have a look at this
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_install_11121.pdf
Take a read on the upgrade path section for this Note
You can upgrade to Data Relationship Management Release 11.1.2.1 from the following releases:
l 9.2.x
l 9.3.x
l 11.1.x
Note: If you are upgrading from release 11.1.2, install this release over the earlier release. If
you are upgrading from a release prior to 11.1.2*, you must first manually uninstall
the old release and then install the new release.
Let me know if this answers you :)
Edited by: Denzz on Apr 24, 2013 11:28 PM

DRM migration issue. Migrating from 11.1.1.3 to 11.1.2.1 using Repository

Greetings, looking for some assistance and hopefully one of our colleagues can assist. When running the repository wizard, we get the following message during the schema copy process: RM_USER -Table does not have a primary key.
Once that message displays the process halts. We checked the RM_USER table and it does have a primary key. Please advise. Thanks.

I would have a look at this
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_install_11121.pdf
Take a read on the upgrade path section for this Note
You can upgrade to Data Relationship Management Release 11.1.2.1 from the following releases:
l 9.2.x
l 9.3.x
l 11.1.x
Note: If you are upgrading from release 11.1.2, install this release over the earlier release. If
you are upgrading from a release prior to 11.1.2*, you must first manually uninstall
the old release and then install the new release.
Let me know if this answers you :)
Edited by: Denzz on Apr 24, 2013 11:28 PM

How to use LCM utility in Hyperion 9.3.1

Hello!
I'm trying to export all my planning and essbase applications. I found that LCM Utility is most recommended to this task.
Can anyone tell me how to use it? Any guide? Because I read that in System 9, LCM Utility haven't UI.
Thanks for your time!
Regards,
Fabián.

Here the guide for LCM in 9.x
http://docs.oracle.com/cd/E10530_01/doc/epm.931/hss_alcm_util.pdf

Upgrade & Migrate from V11.1.1.3 to V11.1.2.2

Hi All,
Currently we are using Hyperion Essbase Server V11.1.1.3 in Windows Server 2003 R2.
We are in a plan to Upgrade & Migrate to Essbase Server V11.1.2.2 in Windows Server 2008.
We are only using Essbase w/o Shared services.
Could you please provide me the below information:
(1) Whether LCM Utility can be used to perform this Upgrade & Migration from V11.1.1.3 to V11.1.2.2 ( not using the Shared Services)?
(2) Any documents w.r.t this Upgrade & Migration using LCM Utility?
Regards,
Swathi.

CelvinKattookaran replied (in response to Sh!va) 1 week ago
Shiva, why not an upgrade?
--I understand that "User have already configured the new environment " .
Cheers!
Sh!va

Migration from 8.3 to 11.1.2.1

We are planning to migrate from Hyperion performance suite 8.3 to Oracle EPM 11.1.2.1 through Migration utility. But we have 2 different source system. is that possibel to migrate 2 source system into one target system. 2 sources system uses the oracle source repository.
Thanks in advance

Hi Krishna,
This is not a Distributed environment. Here the two source systems are different standalone applications. One is Unix and the other is solaris. Still now they ae using two different environments seperatley, now we are planning to migrate these two different source systems into a single target system.
Our questions is as it is two standalone applications it has its own foundation and product deployed databases (both uses oracle Repository) will it make any issuses while migrating 2 foundation services databases to a single foundation services database (11.1.2.1) as the same way two Brio deployed databases to single target IR database (11.1.2.1).
Thanks,
Chinnu

Conversion from Hyperion to SSRS

Hello,
Our division is looking to migrate from Hyperion to SSRS. Does anyone have guidelines/ checklist to perform such conversion.
Thank You
Mar

Hi Mar,
In your scenario, you could use Hyperion Essbase as a data source to retrieve data from Hyperion Essbase database. For more information, please refer to the similar thread:
Tools to migrate Essbase cubes to SSAS and Hyperion
reports to SSRS
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Migration from Small business server 2011 standad to Windows 2012 Server Standard

Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir Ovadia

Hi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Migrate from Hyperion 9.3.1 to 11.1.2.1 using LCM utility

Similar Messages

Maybe you are looking for