Migrate from old x2100 (first generation) to x2250?

I have an old X2100 had crashes at least once a month. It seems to be something related to one disk "disappearing" until I reseat the disks and reboot. Anyway, I am now going to replace the machine with another one. The options are to go with a X2100 M2 (AMD), or a X2250 (Intel). Ideally, I would like to just pop in my old drives into the new machine and get it running. I would expect that there would be no issues in doing so on a new X2100 M2 (I have done this on old UltraSPARC machines), but am not sure if that will work on a X2250. Can someone enlighten me on this?
Thanks in advance.
Rakesh

To add a little more information, I have two 250GB drives in the current machine. Root filesystem and swap are mirrored (software), while the rest of the disks are part of a mirrored zpool.

Similar Messages

Migration from old macbook air to new macbook air...beware

Although spent hours on the phone with Apple and bought necessary cables, they were not able to get migration assistant to work using ethernet.
You can't use firewire as new macbook air doesn't have it. You can use thunderbold as old macbook air doesn't have it.
Finally I was told to use Time Machine. After connecting old macbook air backup to new macbook air and using migration assistant, I got a message saying (essentially) 'you can use this from an old mac'. Spent more time on the phone with Senior tech support. They had no clue.
Finally called the store. Genius said, you can't migrate from old macbook air with Snow Leopard to new macbook air with Lion. You must upgrade old macbook air to Lion first.
GEEZ, do you think someone at tech support might have mentioned that DAYS ago?

Tvlguy wrote:
Finally called the store. Genius said, you can't migrate from old macbook air with Snow Leopard to new macbook air with Lion. You must upgrade old macbook air to Lion first.
That is bad info.
The MBA that I am using right now used a TM backup from my old MBP, which was running Snow Leopard. Absolutely no problems using Setup Assistant to import all the apps, data, user settings. The session performed flawlessly, and took about an hour to move everything.
If at all possible, use Setup Assitant, rather than Migration Assistant. The transition will be seamless.

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

Boot into recovery mode, launch Disk Utility and wipe the HD. Quit DU and restore the OS. On first boot, migrate properly, using the steps in Pondini's Setup New Mac guide.

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Cant find my iTunes library after migration from old PC to new Mac

Can't find my iTunes library after migration from old PC to new Mac?

Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer.

How do I migrate from old Imac to new?

How do I migrate from old Imac to new?

Setting-up a new Mac from an old one, its Backups, or a PC

Migrated from old Mac to new Mac with Lion, iPhoto 6 still here, can't update

Hi, I just migrated from an old MacBook to a brand new MacBook Pro. The Apple Store did the migration for me. For some strange reason, iPhoto 6 is present on this Mac, even though it should have come with iPhoto '11. I understand that I should be able to install iPhoto '11 from the App Store, since this Mac is entitled to it, but it only shows up as a $15 purcahse instead.
Does anyone know how to get the App Store to recognise that this Mac shipped with, and is entitled to, iPhoto '1?

First, get rid of any old copy of iPhoto you have on the new computer. Log into the App Store using your Apple ID. Click on Purchases icon. At the top you should find the three iLife apps with an Accept button to click on. Then you can download iPhoto without having to pay for it.

Migrate from old G4 to new mac mini

how can i migrate from an old mac without airport to a new mini? i have them connected by a firewire cable.

See the following: Transferring files between two computers using FireWire
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications Screensavers written for the PowerPC System Preference add-ons All Unsanity Haxies Browser and other plug-ins Contextual Menu Items Applications which specifically require the PowerPC G5 Kernel extensions Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In MacsApple Guide to Universal ApplicationsMacInTouch List of Compatible Universal BinariesMacInTouch List of Rosetta Compatible ApplicationsMacUpdate List of Intel-Compatible SoftwareTransferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following: >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful; MacBook Air- Migration Tips and Tricks; MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 4/17/2011

Brand New Mini - Can't Migrate from Old

OK, Santa brought a brand new mini to replace my trusty 2007 mini. I fired it up and tried to use migration assistant to migrate from the 2007. First I tried it via network. It got to the screen where it showed the old mini as the source but then just sat there with the buzz saw spinning and 'looking for other computers'. I don't understand why it was still looking...it had found the one that it needed. So I plug my Time Machine disk into it. It gets to about the same point...shows the disk and the buzz saw and the 'looking for other computers' message. Why is it looking for other computer? I rebooted and it finally recognized the Time Machine disk and I selected what I wanted to migrate and it went on its merry way while we had dinner. I come back a couple hours later and it says 'copying system info...about a minute left' or something close. I left it there for about an hour and finally shut it down & restarted. It then went to the gray screen with the apple and the buzz saw and hung there for about an hour. I tried a few more times and then booted into the Utilities screen and am in the process of re-installng Lion. I'm not happy. Any idea what the problems were/are? I hope I can get it working after all this. Did I mention that I'm not happy?

See:
How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks
OS X Lion- How to use Migration Assistant to transfer files from another Mac

Migrating from old mac with OSX 10.7 to new mac with OSX 10.8

I've just bought new MacBook Pro which comes with OS X 10.8 Mountain Lion pre-installed. Previously I was using old MacBook with Mac OS X 10.7 Lion (the model which don't support Mountain Lion). I would like to transfer all my data from old computer to the new one using my TimeMachine drive. I assume that after restoring all my data from TimeMachine, I will have Mac OS X 10.7 Lion on the new MacBook, is this right? If so, would I be able to upgrade my system to Mountain Lion later without buying it on the Mac App Store? Or maybe there is a way to transfer all my data from old computer to the new one, preserving currently installed OS X Mountain Lion on the new laptop?

The reason macjack and tzikowski recommend doing the migration when the computer is booted for the first time is due to how Migration Assistant works. MA doesn't copy Applications & files, it copies Applications & accounts. If you've already logged into your computer, when you use Migration Assistant it will copy your account from your old computer to the new one. Most people have a preferred account name and have already set up their new computer with it so when MA is run and the old account is copied, it has to be renamed. This can be disturbing or disappointing and yes, you can simply delete the first account you made and change the name of the migrated one but the short name isn't changed, just the long name.
But when you boot the computer for the first time you can migrate before any account is created so the old account is copied to the new computer and your account name remains the same. This is the only difference between Migration Assistant and what's called Setup Assistant in the first boot utility.

I have an old iPod, first generation. I want to play a friend's music thru my Bose radio. I've emptied my iPod to my itunes library to allow space on the iPod. Question is: Can my friend put his music on a flash drive and somehow transfer to my computer.

I have an old iPod. First generation. I want to play a friend's music thru my Bose radio at an upcoming party. (already use my Pod w/the radio). Ive emptied my iPod to my itunes library to make more room for additional music.
Question: Can I somehow download my friend's playlist - which is on a flashdrive, transfer it to my itunes and then transfer to the iPod??

If the Apple Store Genuis says you can't sync music from an audio CD to your iPod (because it's too old), he or she is not much of a "genius."
That question is not even related to your iPod. First step is to "rip" the music CD into your iTunes library. Once the songs on the CD are in your iTunes library, they are like any other songs in your library, and you can sync them to your iPod as desired. This article seems to do a good job of describing how to rip CDs
http://www.macworld.com/article/1156861/howto_rip_cds.html
NOTE: When you insert a music CD, it appears in the iTunes sidebar, under DEVICES. If you do not see the sidebar (along left side of window), from the iTunes menu bar, under View, select Show Sidebar.
It was the context of your original question, not the actual task. You can easily add songs files that are on a flash drive to your iTunes library. Open a window that shows the flash drive contents. Drag the song files from that window to the iTunes window, and drop them on your iTunes Music library. Or, use the command
iTunes menu bar -> File -> Add to Library...
NOTE: Open your iTunes preferences, Advanced tab. If the checkbox for Copy files to iTunes Media folder when adding to library is NOT checked, those songs from the flash drive will only be accessible (for playing and syncing) when the flash drive is connected.

Migrating from old iBook

Since the new MacBook has no Firewire I started the migration from an old iBook to the new MacBook by ethernet. However, the Assistant on the DVD that comes with the new MacBook does not run on 10.3.
Now what?
Apple, what the &^%#*? Are you indeed turning into M$?

I used Migration Assistant (MA) to transfer all my files and media from my old PowerBook G4 to my new MacBook. When I opened MA on the old computer, I was asked to put the OS X CD that came with the new Mac into the old optical drive. Something was downloaded onto the old Mac that made it compatible with the new Mac. I assumed it was to sync the versions of MA but I was never told. All I know was that I was then able to begin the transfer.
I used my wireless connection rather than the ethernet ports. To my dismay, the transfer took over 11 hours. To give you some scale, I had over 6000 photos and videos, about 1200 songs, less than 100 docs. As I primarily use the old computer for the internet and iLife, I had very few applications other than the ones that came with it when I bought it. However, I wanted the settings and bookmarks - especially Safari - so I included Applications in the transfer. That's where I think I made a mistake because it seemed to take an inordinate amount of time checking versions and transferring. You never really know what is going on during the transfer but there are vague one-liners like, "Transferring Applications" that are displayed under the sliding thermometer that tracks your progress. I left the two computers open, side by side, and went to bed with my fingers crossed.
I got up the next morning and immediately looked at the new Mac to see if everything/anything had come over. I couldn't find a thing but I had lost 40 Gigs of memory somewhere. I searched frantically through every folder on the new hard-drive but couldn't find the new files. I finally had to take it down to the Apple store where I have bought it and get a Genius to help me. First thing he did was check my Users folder to see how many logins there were for this computer. To distinguish the old Mac from the new Mac, I had forgotten that I had added my middle initial to my name. A simple logoff and login as my new personna and Voila! Transfer completed!! Everything right where it should be and all my settings. MA was slow but it worked.
Sorry for relating the total saga but I it might be useful to others. I don't know if using an ethernet cable would have speeded things up. Maybe someone else can tell that story.
I'm happy with the new MacBook, although I miss the size and convenience of my old beloved 12" G4. I don't have any glare issues because I tilt the screen and change my seat for better light - which is why I thought most of us bought a laptop and not a desktop. It's mobile, faster, bigger, and brighter. I'm happy. Hope this helps.
Peter

Migration from old MacBook Pro to newer, lose iPhoto folders. Any cure?

In a recent migration using migration assistant from old MacBook Pro core 2 duo (10.6.8) to a newer quad core i7 (10.8.3), when I opened iPhoto for the first time and nothing happened. I then imported all my photos from the old iPhoto, and lost all folders I had. Now it seems I have to redo all folders. Any cure? I could do a clean install if there is a solution.

http://office.microsoft.com/en-us/
Sign up for the free trial, and use the office applications online for up to 30 days.
Granted, they online versions won't be IDENTICAL to the Mac versions you're used to, but it will get you through until you get back home, and you SHOULD have the ability to save the docs in a format you can use with your Mac apps later.
Another alternative is the free OpenOffice.org and similar open-source Office applications that can read and write MS-Office file formats.
Message was edited by: kostby

Migrating from old MBP to new

I've just purchased a new MBP 17" i7 to replace my 2008 MBP 15". When I got my 2008 version, I just used the Firewire 800 to move all of my stuff from my iMac to my MBP. Spent a few minutes fixing some passwords, and that was that. Probably took around an hour.
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed. I use Time Machine to back up my computer, and have all of my iTunes media files on a portable 1TB hard drive (I've got thousands of songs in Apple Lossless). So here are my questions:
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
2. Will Time Machine "start over." Will I lose 2 years of incremental backups? It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.

OrangeMarlin wrote:
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed.
+Setup Assistant+ has been greatly improved for Snow Leopard. See #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
Makes little difference. It's a bit easier from Time Machine, since you don't have to start up the old Mac in Target Disk mode and make the connection, but otherwise it makes no difference (assuming you didn't exclude anything important from Time Machine).
2. Will Time Machine "start over."
As William says, yes.
Will I lose 2 years of incremental backups?
Depends on how much space is on your Time Machine drive.
It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
Yup, absolutely. If you keep the old drive "on the shelf" you can always display and restore from it via the +*Browse ...+ option, per #17 in the FAQ.
Or, if you get a new, larger drive, you can copy the existing backups to it, and continue backing-up to the same set of backups. See #18 in the FAQ. If you do that, when the first backup of the new Mac starts, you'll get the prompt in #B5 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
Yup. Just hold down the Option key while starting iTunes; you get a prompt to Create a library or Choose an existing one.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.
I'd recommend against that. +Setup Assistant+ runs immediately when you first boot the new Mac up; if you take all the defaults, it will move everything from the old Mac (or backups) except OSX. No temporary user profile, no setting-up communications, etc.
If you're nervous about losing things, and don't have secondary backups, do your final Time Machine backup of the old Mac, and turn it off. Use the backups to transfer your data, so the old Mac won't be involved at all.

Migration from old to new MacBook Pro

Old machine uses Leopard. New machine uses Snow Leopard. If I use migration assistant from old to new, will new machine end up with Leopard instead of retaining Snow Leopard?

Hi guys, sorry to bug in. I searched on the different discussions available and found yours to be closest to my query.
I hope you don't me popping a few questions regarding Migration Assistant.
I have had a MacBook Air for about 2 years now, and recently bought a MacBook Pro.
I performed a Migration of the content in MBA to MBP and it was successful as far as content transfer is concerned.
Now I have the database from the MBA in the new MBP, but none of the user setting or Applications were "installed". I tried to open "Applications", "Movies" folders, but I was not allowed to open them.
Is it possible to migrate the content and use as if it was in MBA? Or do I have to download and reinstall the various programs/applications I had in MBA again? (eg Handbrake, VM Fusion, etc)?
Much appreciated for your time & feedback.
Tony

Migrate from old x2100 (first generation) to x2250?

Similar Messages

Maybe you are looking for