Migrate from Windows XP x86 to Windows 7 x64 using MDT 2013

Hello everybody,
We are migrating our Windows XP(x86) workstations to Windows 7 (x64). We are aware of the necessary gymastics tu perform on USMT in a way to run the scanstate with an older version of USMT in Windows XP, and then run the LoadState in Windows 7 environnement
with the newest one. 
The problem is that I cannot run MDT TaskSequences (referring to a X64 windows 7 Image) in Windows XP (full OS environnement). Can anyone please tell me if there is a way to get arround this ? is there any method to execute this migration ?
Thank you in advance.

Hello,
You can use usmt with mdt. It's necessary to modify the script mdt
http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
http://www.deploiementwindows.com/migration-windows-xp-vers-windows-8-1-avec-mdt-2013/
Thank you Nicoals for your replay, but my problem is to run MDT task Sequence (including Windows 7 x64) on Windows XP. 

Similar Messages

  • Migrating from BEA WebLogic 5.1 (Windows 2000) to iAS9

    Hi!
    I am looking for a step-by-step guide for migrating from BEA WebLogic 5.1 (Windows 2000) to iAS9. The guide should contain the detailed information on how to migrate servlets and EJBs.
    Some of my questions are:
    - What do I have to do when I have system startup files from WebLogic? Are there equivalent properties for iAS9?
    # Register a startup class by giving it a virtual name and
    # supplying its full pathname.
    #weblogic.system.startupClass.[virtual_name]=[full_pathname]
    # Add arguments for the startup class
    #weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
    - How do I set the system properties?
    Phuoc
    null

    This a response to the specific point of startup/shutdown classes, a whole Migration paper is underway
    Since Servlet 2.2 and EJB containers in 9i AS run within the middle tier database instance,
    the easier way to accompish what you want is to declare those classes as database startup/shutdown triggers (Java stored procedures).
    You can also set session properties using the "modifyprops" command (cf Java Tools Reference)

  • Error While Using MDT 2013 to Refresh Windows XP to Windows 8.1 during Computer backup to network

    Hi,
    I am getting below error in Deployment Summary  while Computer backup to network during Refresh from XP to 8.1 through MDT 2013.
    1. I followed URL-
    http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx to use USMT for the UserProfile through MDT 2013.
    2. For User profile I am using Hardlink USMT through MDT Wizard, that is working fine.
    3. My Deployment Share rule is below..
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=YES
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipComputerBackup=YES
    SkipBitLocker=YES
    DoCapture=YES
    ComputerBackupLocation=NETWORK
    BackupShare=\\MDT2013\share$
    BackupDir=%OSDComputerName%
    BackupFile=%OSDComputerName%.wim
    BackupDrive=ALL
    4. ZTIBAckup Logs below..
      2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context=""
    type="1" thread="" file="ZTIBackup">
    <![LOG[OriginalPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '26213933056' and VolumeName = '' and VolumeSerialNumber = '7413DBF4']LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup"
    context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Search for Drive: OriginalPartitionIdentifier  SELECT * FROM Win32_LogicalDisk WHERE Size = '26213933056' and VolumeName = '' and VolumeSerialNumber = '7413DBF4']LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup"
    context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Found Drive: C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDisk is now = C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Checking to see if we can store the backup locally]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive C: 3231300]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive D: 272600]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive X: 2489]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Local store path = C:\StateStore]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Total used space: 3506389]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Available space at C:\StateStore: 22368244]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Backup can use local path]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property USMTLocal is now = True]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Network store path set to:
    \\MDT2013\DeploymentShare$\Tools\X64\imagex.exe"  /capture /compress maximum C: "\\MDT2013\share$\TEST8\TEST8.wim" "001CDrive" /flags EnterpriseN]LOG]!><time="13:16:21.000+000"
    date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Command has been started (process ID 1248)]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1248)]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Version: 6.3.9600.16411]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Files/folders excluded from image capture by default:]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~bt]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~ls]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \winpepge.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Windows\CSC]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycled]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycler]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$Recycle.Bin\*]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \System Volume Information]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \swapfile.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \pagefile.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \hiberfil.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Turning on VERIFY option for network share]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Scanning files and directories...]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   0% ] Capturing progress ]LOG]!><time="13:16:33.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   1% ] Capturing progress ]LOG]!><time="13:16:33.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   2% ] Capturing progress: 11:04 mins remaining ]LOG]!><time="13:16:47.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   3% ] Capturing progress: 9:12 mins remaining ]LOG]!><time="13:16:47.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   4% ] Capturing progress: 7:58 mins remaining ]LOG]!><time="13:16:50.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   5% ] Capturing progress: 7:20 mins remaining ]LOG]!><time="13:16:55.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   6% ] Capturing progress: 7:59 mins remaining ]LOG]!><time="13:17:07.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   7% ] Capturing progress: 8:23 mins remaining ]LOG]!><time="13:17:13.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   8% ] Capturing progress: 8:20 mins remaining ]LOG]!><time="13:17:17.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   9% ] Capturing progress: 8:33 mins remaining ]LOG]!><time="13:17:26.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  11% ] Capturing progress: 8:21 mins remaining ]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  13% ] Capturing progress: 7:37 mins remaining ]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [ RETRY ] Restoring C:\WIMA8B0.tmp again (Error = 1392)]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\StateStore\USMT\File\C$\MININT\SMSOSD\OSDLOGS\BDD.log (Error = 80)]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1"
    thread="" file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\StateStore\USMT\File\C$\MININT\SMSOSD\OSDLOGS\BDD.log (Error = 80)]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1"
    thread="" file="ZTIBackup">
    <![LOG[  Console > Error imaging drive [C:\]]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > The file exists. ]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Return code from command = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Error creating an image of drive C:, rc = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    <![LOG[ZTIBackup COMPLETED.  Return Value = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    5. Computer Backup Dir is accessbaile and permission is ok.
    Any idea to resolve this issue
    Shailendra Dev

    After changing the BackupDrive=D: , I am able to take backup of D drive only , but I want to take all the local drives backup before installing windows 8.1
    please suggest .
    Shailendra Dev

  • I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • Migrating from 9.2 to 10.0 portal using migration wizard in 10.0.

    Migrating from 9.2 to 10.0 portal using migration wizard in 10.0.
    I am getting the following errors:
    "A WebLogic Portal web application project should be added as a J2EE module a WebLogic Portal EAR project for proper deployment
    The associated EAR "MyPortalEAR" is not a Portal Application Services EAR          LabPortal     "
    I just followed the steps given in portal guide.
    Can some one help

    They are not available for download.
    Don't erase your 9.x on your system yet, you'll need to upgrade your firmware first:
    http://docs.info.apple.com/article.html?artnum=86117
    Otherwise you may end up with a permanently blank screen.
    Once your firmware is up to date, and you have at least 3.5 GB of at least a 10 GB hard drive free (see my FAQ*: http://www.macmaps.com/diskfull.html to learn what proportions you need free), you have at least 512 MB of RAM, and your data is backed up, you can upgrade to 10.3.9. I wouldn't bother with anything less. See this place*:
    http://www.macmaps.com/usedrefurbished.html
    on where you might be able to find 10.3 retail, which looks like *, and then you can upgrade to 10.3.9 from the combo update here:
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    10.0 to 10.3 are not tiger. 10.0 = Cheetah, 10.1 is Puma, 10.2 is Jaguar, and 10.3 is Panther. Ironically 10.3 is the fastest of the bunch.
    - * Links to images I asterisk, and my pages are hosted on a website I may get compensation from.
    Message was edited by: a brody

  • Why can't I migrate from an iPhone 3GS to a 4GS using iCloud Backup/Restore?? (Says incompatible.)

    Why can't I -simply- migrate from an iPhone 3GS to a 4GS using iCloud Backup/Restore??
    (The 4GS says it's incompatible with 3GS iCloud Backups and so it cannot restore them.)
    I've had to use a computer with iTunes, but surely iCloud can be used fior this?

    You need to update your 4 to newer software to restore from icloud back up, until then you will get incompatible message. So steps are - set up your iphone 4 as new. Update. Erase. Restore from cloud backup. If you update does not take long you should be all set within an hour.

  • Using MDT 2013 for deploying Software from MDT Server to PC Client automatically and silently ?

    I have a trouble about deploying software from MDT 2013 server to PC Client , Can we using MDT 2013 for deploying software automatically and silently , that Users/Clients don't have to click "next,next" to install software ?
    If you have a solutions to deploying it , please share me about that solutions ?
    Thanks.
     

    you can make software silently with boot opción:
    with chocolatey opensource.
    or make software with switches
    here link to help you:
    http://blogs.itpro.es/octaviordz/2014/05/29/instalando-aplicaciones-con-chocolatey
    http://blogs.itpro.es/octaviordz/2014/06/05/integrando-chocolatey-a-mdt-2013-e-instalando-aplicaciones-de-forma-desatendida-en-windows-8-1/
    http://blogs.itpro.es/octaviordz/2014/10/31/probando-chocolatey-en-windows-10
    http://blogs.itpro.es/octaviordz/2012/07/10/aplicaciones-desatendidas
    MVP Jesús Octavio Rdz http://blogs.itpro.es/octaviordz

  • Mail Migration from Entourage mac to Outlook windows

    Hi,
    I am stuck in a situation of migrating the emails and its sub mail folders from Entourage 2008 mail client runnung in mac over to Outlook 2010 installed in my windows system.
    I have thousands of important mails stored in several folders in entourage 2008.
    So how can I make the migration from Entourage to Outlook possible.
    The solution will be really appreciated if its simple and direct, coz I have a loose hand in performing way-round step-wise technical stuff.
    Thank you

    Hello,
    In order to solve your issue, I recommend you post your issue to outlook forum.
    http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
    Cara Chen
    TechNet Community Support

  • Windows 8.1 Copyprofile Issue (SCCM 2012R2 MDT 2013)

    Hi,
    We're experiencing several issues during creation of our base Windows 8.1 image.
    Running SCCM 2012 R2 with MDT 2013 Integration.
    Admin user customizations (a couple of simple UI settings and a wallpaper) are done to the Windows 8.1 image in audit mode. The OS is then sysprepped and captured via SCCM capture media.
    We are using a standard MDT integrated task sequence for a zero touch deployment.
    We are adding copyprofile to unattend.xml in the relevant MDT settings package.
    Sequence completes without error and customizations appear in the image.
    However, desktop IE11 immediately crashes unless it's run as administrator. This can be fixed by disabling protected mode (not ideal)
    All Metro/Modern apps (including IE) are also initially broken. They immediately crash and drop you back to the desktop when you run them.
    After a reboot the modern/metro apps (apart from IE) seem to reinstall and function correctly.
    Has anyone else got copyprofile working correctly for 8.1 in a SCCM/MDT task sequence?
    thanks
    James

    Hi James,
    We were able to work around this issue in the following way using SCCM 2012 R2. I know this is not how the process is documented or has worked previously but it is what worked for us.
    1. Create an unattend.xml with the copy profile setting (and whatever other settings) enabled.
    2. On the image which will be captured run all of our regular steps to customize on the administrator profile (I always set administrator pw at this point to have blank pw, don't know if still required), copy that unattend.xml locally.
    3. Do not run a standard capture using SCCM capture ISO, instead manually run sysprep specifying the unattend.xml. I.e. sysprep /generalize /oobe /shutdown /unattend:C:\Unattend.xml .
    4. Boot to either the SCCM PXE or some other environment on that computer that has network access, and access to imagex.
    5. Run an imagex capture to a network location (in our case the C: was all that was needed).
    6. Import that WIM into SCCM as part of task sequence. Also added same unattend.xml used for sysprep into the task sequence to apply settings during first boot after image.
    7. Validated our start menu icons and layout are there on the image.
    Until the behaviour changes in Windows 8.1 or SCCM, then this should get you by. Little bit of extra work in the capture but we had positive, consistent results using this method.
    Thank you! This was driving me crazy! Now it works on the first try.
    Just a side note: You should not use ImageX with Windows 8.1. Create a new WinPE Bootmedia and use DISM! ImageX is outdated.

  • Synaptics Pointting device Driver installs on an Desktop machine while deploying Windows 7X64 using MDT 2013 Update 1

    I am deploying Windows 7X64 on Dell OptiPlex 990 and other desktops. Deployment goes fine but the Synaptics pointing device driver gets installed after the deployment is complete. Also after applying operating system I get a prompt to Run the Synaptics Pointing
    Driver setup twice. If I don't click yes to install the TS wont proceed. Its gets worse when I uninstall the Synaptics Device Driver from Appwiz.Cpl and reboot the machine the Keyboard fails with the error Code:29. Above is the screenshot of what I get after
    Applying Operating System step. Thanks in Advance.

    I have also encountered this in MDT 2013 Lite Touch deployments for Windows 8.1 and I am researching it. 
    I noted that the Synaptics driver was installed for "SmBus" in Device Manager for a motherboard with an Intel 7 Cxxx Series chipset (Dell Optiplex desktop).  The HardwareID's are all PCI\VEN8086...
    We use %Model% in our task sequence and have a folder for each model such as "Optiplex 7010" in Out-of-Box Drivers. 

  • Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

    Hi,
    Trying use "User-Driven Installation"  with
    SCCM 2012
    R2 CU4 and MDT
    2013 Update 1 for deploy Windows
    10.
    Created MDT Task Sequences with
    template "Client Task sequence"
    and Deployment Method "User-Driven Installation".
    When I try to deploy I have error like:
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Part smsts.log
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
    [ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
    Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    !--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the action: Error in the task sequence.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
    The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
    MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
    Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
    Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

    MDT Updates for Windows 10 Technical Preview Build 10041
    Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
    http://zalozny.com.ua

  • SQL 2005 x64 poor performance after migration from SQL 2005 x86

    Recently We've migrated SQL 2005 x86 SP1 Enterprise running on Windows 2003 Enterprise to new hardware where is running Windows 2008 SP2 and SQL 2005 x64 SP4 with CU3.
    In the work day, there are sometime SQL excpetions like this below. On other hand i can also tell that we already found some queries which has some inner joins and where clauses on nvarchar fileds, because of the nature of application. Such a query
    is running for about 11 seconds on old SQL server, and about 6 minutes on new SQL server. My main question if is this possible just with a change to new architecture of SQL and more last patches and updates for SQL 2005. Is there any way how to get
    this queries running faster, without rewritng them with new ones? Is this also possible this could be also cause for SQL exceptions, which we are facing on SQL server?
    About new hardware, for now we can't find it something wrong. There is basic configuration:
    Cisco UCS  C220 M3S (1U server)
    32GB RAM
    Intel(R)Xeon® CPU [email protected], 6 core
    Disk system: 4xSAS 300GB in RAID5 (OS and DATA) and 2xSATA 1TB in RAID1 (SQL backup)
    RAID controller: LSI MegaRAID SAS 9271-8i (with latest driver and firmware)
    Part of log of dump file:
    2014-05-09 08:30:07.08 spid86      Error: 17311, Severity: 16, State: 1.
    2014-05-09 08:30:07.08 spid86      SQL Server is terminating because of fatal exception c0000264. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling.
    Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart).
    2014-05-09 08:30:07.08 spid86      Using 'dbghelp.dll' version '4.0.5'
    2014-05-09 08:30:07.08 spid86      **Dump thread - spid = 86, PSS = 0x0000000132A67ED0, EC = 0x0000000132A67EE0
    2014-05-09 08:30:07.08 spid86      ***Stack Dump being sent to D:\MSSQL.1\MSSQL\LOG\SQLDump0087.txt
    2014-05-09 08:30:07.08 spid86      * *******************************************************************************
    2014-05-09 08:30:07.08 spid86      *
    Thanks for any help,
    Matjaž

    >Is there any way how to get this queries running faster, without rewriting them with new ones?
    You need to perform basic performance tuning steps in the new environment.
    Software optimization:
    http://www.sqlusa.com/articles/query-optimization/
    Disk optimization:
    http://www.sqlusa.com/bestpractices/configureharddisk/
    Memory optimization:
    http://www.sqlusa.com/bestpractices/memory-configuration/
    REBUILD INDEXES, eliminate missing indexes & UPDATE STATISTICS.
    If there is still a problem, look in Activity Monitor for expensive queries. Optimize them. As a general rule, you don't want to have expensive queries in RDBMS.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Migrating from PSE 5.0 on Windows XP to PSE 8.0 on Windows 7

    I am running PSE 5.0 on Windows XP on my old computer.  Half of my images (about 55GB--or about 15,000 images) are on the C drive under My Pictures  (lots of folders under there).  The other half are on an external  USB drive which I will be moving to my new computer.   Can I just follow the full backup and restore suggestion for the earlier question today?  I understand about renaming the external drive and giving it the same drive letter but obviously the full path name for the images currently on the C drive will be different.  Any suggestions will be highly appreciated.

    I strongly recommend first upgrading to PSE 8 on the old computer, and then moving your catalog and photos to the new computer.  That will make troubleshooting much easier -- given that you're changing computers, version of Windows, and version of PSE, it's very possible you'll run into problems.  It's likely that PSE 8 will run fast enough on your old computer to do the upgrade (it will probably be sluggish).
    Then, once you've upgraded to PSE 8, you have two options for moving your catalog and photos:
    1. Use the backup/restore method:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos_1
    You'll need to restore all of your photos on the external drive or on the C drive -- you can't split them.  But this method is usually the most straightforward method to use, especially for people who aren't experienced Windows administrators.   After you do the restore, you could use PSE to rearrange the locations of your photos:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos
    2. Copy the catalog folder from the old computer to the new (do Help > System Info in the Organizer to find the location).   Copy the picture folders on the C drive from the old to the new.  Plug in the external drive to the new computer.  PSE 8 will correctly find your photos on the external drive even if the drive letter is different (because it uses the drive's volume serial number).  But because you're moving from XP to Windows 7, the paths of the folders on the C drive are likely going to be different, and if they are, you'll have to do File > Reconnect > All Missing to reconnect your catalog with the new location of the drive C photos.  The Reconnect command can take some patience and very careful reading to use:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Quickly_reconnecting_large
    Most people don't have the patience and get tripped up by it.

  • Migration from Infotmix 11.5 to Oracle 10g using OMWK

    Hi,
    when i try to migrat Informix 11.5 to Oracle 10g with OMWK i got an error
    ** Oracle Migration Workbench
    ** Production
    ** ( Build 20050629 )
    ** OMWB_HOME: C:\Temp\eBook\Oracle\omwb
    ** user language: en
    ** user region: null
    ** user timezone:
    ** file encoding: Cp1252
    ** java version: 1.4.2_04
    ** java vendor: Sun Microsystems Inc.
    ** o.s. arch: x86
    ** o.s. name: Windows NT (unknown)
    ** o.s. version: 6.0
    ** Classpath:
    ..\lib\boot.jar
    ** Started : Fri Dec 03 10:20:28 GMT 2010
    ** Workbench Repository : Oracle9i Lite ORDBMS 4.0.3.11.0
    ** The following plugins are installed:
    ** Informix Dynamic Server 9.x Plugin, Production Release 10.1.0.4.0
    ** Active Plugin : Informix9
    : Informix Dynamic Server 9.52.TC7CE
    : IBM Informix JDBC Driver for IBM Informix Dynamic Server 2.21.JC5
    java.sql.SQLException: [POL-2401] the number value is not in the valid range
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.jniExecute(Native Method)
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.execute(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeInt(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeUpdate(Unknown Source)
         at oracle.mtg.informix9.server.Informix9LoadTableData._loadSourceModelData(Informix9LoadTableData.java:621)
         at oracle.mtg.informix9.server.Informix9LoadTableData.run(Informix9LoadTableData.java:703)
         at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
    java.sql.SQLException: [POL-2401] the number value is not in the valid range
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.jniExecute(Native Method)
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.execute(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeInt(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeUpdate(Unknown Source)
         at oracle.mtg.informix9.server.Informix9LoadTableData._loadSourceModelData(Informix9LoadTableData.java:621)
         at oracle.mtg.informix9.server.Informix9LoadTableData.run(Informix9LoadTableData.java:703)
         at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
    java.sql.SQLException: [POL-2401] the number value is not in the valid range
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.jniExecute(Native Method)
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.execute(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeInt(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.executeUpdate(Unknown Source)
         at oracle.mtg.informix9.server.Informix9LoadTableData._loadSourceModelData(Informix9LoadTableData.java:621)
         at oracle.mtg.informix9.server.Informix9LoadTableData.run(Informix9LoadTableData.java:703)
         at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
    java.sql.SQLException: [POL-5205] column not found
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.jniPrepare(Native Method)
         at oracle.lite.poljdbc.LiteEmbPreparedStmt.prepare(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.<init>(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCPreparedStatement.<init>(Unknown Source)
         at oracle.lite.poljdbc.OraclePreparedStatement.<init>(Unknown Source)
         at oracle.lite.poljdbc.POLJDBCConnection.prepareStatement(Unknown Source)
         at oracle.mtg.informix9.server.Informix9LoadTableData._loadSourceModelData(Informix9LoadTableData.java:464)
         at oracle.mtg.informix9.server.Informix9LoadTableData.run(Informix9LoadTableData.java:703)
         at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
    EXCEPTION : LoadTableData.run() : IDS9_SYSUSERS [POL-5205] column not found
    _releaseConnection did not find connection to release!
    java.lang.Exception
         at oracle.mtg.informix7.server.Informix7ConnectionCache.releaseConnection(Informix7ConnectionCache.java:168)
         at oracle.mtg.informix7.server.Informix7ServiceImpl.releaseSourceConnection(Informix7ServiceImpl.java:310)
         at oracle.mtg.informix7.server.Informix7SourceModelLoad.loadSourceModel(Informix7SourceModelLoad.java:312)
         at oracle.mtg.informix7.ui.Informix7CaptureWizard.doCapture(Informix7CaptureWizard.java:751)
         at oracle.mtg.informix7.ui.Informix7CaptureWizard._runDialog(Informix7CaptureWizard.java:561)
         at oracle.mtg.informix7.ui.Informix7CaptureWizard.capture(Informix7CaptureWizard.java:490)
         at oracle.mtg.migrationUI.ActionMenuHandler._capture(ActionMenuHandler.java:208)
         at oracle.mtg.migrationUI.ActionMenuHandler.run(ActionMenuHandler.java:85)
         at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
    ** Shutdown : Fri Dec 03 10:40:09 GMT 2010
    mayby because i'm using plug-in for Informix 9 (i cannot find plug-in for Informix 11.5!)
    could you hlep me?
    Thanks
    Maysar

    Hi,
    The 10.1 OMWB does not support the migration of Informix 11.5 and there is no plugin for that version.
    At the moment SQL*Develeoper migration workbench doesn't support Informix migrations either.
    If you have access to My Oracle Support have a look at this note -
    How To Migrate Non-Oracle Databases For Which A Migration Workbench Option Is Not Available (Doc ID 393760.1)
    Regards,
    Mike

  • X86 libs on x64 using --arch=i686 installes to /usr/lib

    Hi. I have x64, and need some x86 libs.
    I thought running "pacman -S --arch=i686 somelib" would just install files in /usr/lib32, but it seems it installs directly to /usr/lib.
    Of course, this is creating quite some problems as programs picks up 32-bit libraries.
    I'm afraid to restart my computes until I've fixed this.
    Any tips on how I can revert this?
    And how I can make "--arch=i686" install to /usr/lib32 by default? (or any other way to handle this)

    slint wrote:The arch flag is useful when you want to install something on a different system (for example a chroot). Normally you would handle this by installing the lib from multilib, but you can also create a dedicated 32 bit arch chroot.
    Oh..
    slint wrote:If you didn't overwrite any libraries from other packages (shouldn't if you haven't used -f) a simple pacman -R should be engough I guess.
    I didn't use "-f", but it seems pacman overwrote symlinks anyway.
    With -R, it complains that other packages relies on this, even though those packages relies on the x64 packages.
    "pacman -R -v --debug --arch=i686 somelib" doesn't give me confidence that it won't break my system if I drop checking for dependencies - not a single place are i686 referenced even though I specified --arch with -R.

Maybe you are looking for

  • How can I stop unwanted scam emails  ex: someone wats to give me $2,500,000.00

    How can I stop unwanted emails?  Here is an example: Good Day, Although, I do not know you in person, I have received your contact via, personal search while seeking a reliable but obscure individual to assist me in this pending transaction. It becam

  • What do I do about this adobe flash player problem

    On a vehicle website and I can't play a video or run any application because it says I need to get adobe flash player? I tried to do that and it's not letting me. Should I just download an app to fix the problem or what?

  • How to stop a listener?

    hello, i'm working on a small school project, i'm experimenting a little with listeners and I wanted to know if it was possible to exit a listener? as soon as i start draging, i want to execute the commando "jPanel1.add(com)" and right after that i w

  • LOV Dependant Fields

    We are trying to do something along the lines of the following: http://otn.oracle.com/tech/blaf/specs/dialogscontextual_template.html#dependent We will have 2 LOVs in our form (we will call LOV1 and LOV2): Based on the input of LOV1 (ten items availa

  • Problème avec mon waveform chart à la sortie d'un sous VI

    Bonjour à tous, J'ai créé un sous VI réalisant une acquisition de température et affichant cette acquisition sur un waveform chart. Cependant, lorsque je sors les données de mon sous VI, celle-ci e s'affiche pas alors que à l'intérieur de mon sous VI