Migrate GLCS2 to DWCS4 problem.

I installed the migration extension in Dreamweaver CS4 and repeatedly attempted to import GoLive CS2 site, but I keep getting the error message:
"Please select a folder that contains your Adobe GoLive site files."
And yes I know that I must select the folder that actually contains the site file... and I did.
I read the instruction over-and-over and don't see how I am making any mistakes.
I did a search on this forum but other's migration issues seem different than mine.
I did restart Dreamweaver several times and repeatedly choose the site folder via the 'browse' feature, but with no success.
This appears to be a bug.
Any ideas?
Thanks.
RonL

Thanks for asking John.
I'm not having any trouble with DW, and after posting realized I shouldn't have.
Just reminded me why I missed GL not being continued.
Not trying to start a GL/DW war.
If people like DW and actually find it user friendly... excellent.
I think it is always better that there is competition and when only one major product exists to accomplish a task... well..
Fortunately Photoshop, Illustrator, Acrobat, and InDesign are truly excellent... since there is nothing really on the same level to compete with them.
Anyway... thanks again... and enough of my whining. <g>

Similar Messages

Migration Assistant vs Mavericks = Problems?

Hello all,
I am trying to use Migration Assistant to transfer everything from my old Mac book to my new iMac 27".
Both have Mavericks installed.
Both have system preferences set to "never sleep".
But each time I attempt migration one or both computers go to sleep within seconds, and migration fails!
Any advice?

I had migration problems transferring data from old Mac Book Pro running Mavericks (10.9) to new MBP Running Mavericks (10.9).
The only solution that worked for me and have everything run correctly was to migrate from my Time Machine Time Capsule.
Here is what I did To Fix Migrate Problems From Old Mac To New Mac -
But Email Did Not Run Correctly after migration:
A. Process To Correct Migration Problems from old Mac Book to New Mac Book:
Set up computer and after it is set up then do steps 1 - 5:
1. Set Apple Preferences > Energy Saver > Put Computer to Sleep Never, Do Not Put Hard Drive To Sleep.
2. Use Disk Utility to verify and correct the source: Disk and Disk Permissions
3. Reset Pram: Restart Computer and Immediately hold down the Command, Option, P, R Keys simultaneously until computer chimes ring twice
http://support.apple.com/kb/PH14222
4. Reset SCM (System Management Control): Shut down computer, then: Simultaneously hold down Shift, Control, Option, Power Button - for MacBooks Late 2009 and later
http://support.apple.com/kb/ht3964
5. Run Migration Assistant (in Utilities Folder which is inside the Applications folder)
B. Email Problems After Migration - GRRR!
After Migration I had Email Problems with my email Sub Folders not being visible, all emails not viewable and could not access my iCloud Email Account.
I tried re-indexing mail by removing Envelop files from the Mail Data folder (path: Go menu, hold down option key, Library > Mail > V2 folder > Mail Data folder > 3 Envelope files (move to desk top).
Nothing worked.
C. Solution: I migrated data from Time Machine Time Capsule to my new Mac Book Pro. All worked correctly - Rejoice!
To Migrate from Time Capsule to new Mac:
Get an Ethernet to Lightning Adapter to connect Time Capsule to New Mac
You can use the Ethernet to USB adapter but Lightning adapter has much faster throughput.
1. Back up your old Mac using Time Machine
2. Connect your new computer to Time Capsule with ethernet to Lightning or USB adapter
3. Verify the Sparsebundle (backup data file) on Time Capsule using Disk Utilitiy
Path to Sparsebundle:
A. Using the Mac connect to Time Capsule go to Finder > Go Menu > Network > select Time Capsule, log into Time Capsule > select User > you will see Sparsebundle file
B. Run Disk Utility to Verify / Fix data
Time to back up data from New Computer to Time Capsule.
I am now running a new backup from new computer to Time Capsule via Ethernet to USB connector (would recommed using Ethernet to Lightning connection).
Backing up 126 GB. So far it has taken 6 hours to back up 7.8 GB. Estimated time to complete is 4 days.
Very slow. When I get my ethernet to Lightning adapter I will replace the USB wth Lightning adapter and would expect a much faster through put - UB2 maxes out at 42 MB per sec and Lightning is at least 5 times faster.

Migrated User Account Keyboard Problem AFTER Login

I have a brand-new MacBookPro (with multi-touch trackpad) that came with Leopard preinstalled. When I first started up the new computer, I set up a new administrator user account first. Then I used Migration Assistant to migrate my primary user account from my PowerBook G4, which is running the latest version of Tiger. I can log into my old user account with the same password I have always used, and everything looks fine--my old desktop is there, my Mail, iCal and iTunes settings all look great, etc.--but I can't use the keyboard. I can use the mouse to click on menus; the keys for the volume and backlight controls work, and some of the keys on the right side of the keyboard work (which seems particularly weird), but I can't do anything else with the keyboard. When I log out of the account and try to go back to the new admin account, the keyboard no longer works at all until I reboot. If I go directly into the new admin account, the keyboard is fine; it only starts locking up AFTER I log into my old user account. I have not had any keyboard problems with any other user accounts that I have created from scratch on the MacBookPro, nor have I had problems with the other user accounts I migrated from the PowerBook. After consulting with an Apple rep on the phone, I have tried the following things:
1. deleting my migrated keychain file on the problem user account and letting it make a new login keychain;
2. deleting the original default keychain on the PowerBook and re-running the Migration Assistant;
3. deleting the problem user on the MacBookPro using the option of creating a disk image, and then creating an empty file in the Users folder with the same name as the problem user account and then dragging the files from the disk image into the folder, and then creating a new version of the user account with the same name, password, etc.;
4. running Disk Utility to fix permissions (multiple times);
5. I have completely erased and reinstalled the system on the MacBookPro using the install DVDs twice. The first time, I ran Migration Assistant immediately after the "Welcome," and the second time I set up a new administrator account first and then ran Migration Assistant.
6. I have also tried the steps outlined in this article: http://docs.info.apple.com/article.html?artnum=306840.
7. I have tried moving my user files over by hand but then I have a ton of permission problems and I was having trouble getting my Mail settings/mailboxes to move over properly. I've spent hours and hours on this.
I have NEVER had so much trouble upgrading to a new computer or a new OS in all the years I've owned Macs! What am I missing???

Well...I'm not sure which of the following fixed my problem, but once I realized it was something to do with the numeric keypad keys, I went into both the Keyboard & Mouse preferences and the Universal Access preferences and I made sure that I set everything back to the default settings. I suspect that going to Keyboard&Mouse-->Keyboard Shortcuts and clicking on "Restore Defaults" is what did the trick. So far, so good. I hope this helps somebody else; I couldn't find anything else anywhere about this somewhat quirky problem.

Time machine after migration to new mac - problem

After migrating all of the data from a MacBook Pro to a new iMac 27, I discovered a glitch in the Time Machine backup. I kept getting error messages that Time Machine could not back up 560 gigs but my new machine had only 160 gigs on the hard drive for backup. After discussions with the hard drive manufacturer, and an Apple representative, I read on the forum about backing up multiple hard drives. This gave me an idea, and sure enough, I have two additional hard drives daisy chained to the backup hard drive. Apparently Time Machine was also trying to back up the two additional hard drives (which I use for additional backups). After excluding those two extra hard drives in system prefs under Time Machine options, the problem went away. Now for the first time in a few years, Time Machine is backing up only my primary computer.

Sorry, I was posting this for anyone who had a similar problem. I solved my own question - dufus as I was - and posted this for the edification of others.

Migrating from messaging direct -- problem with read messages

Folks,
We are migrating from messaging direct's mail server. What I am doing is tar'ing up a user's account,moving it to the new server and untar'ring it. I them use mboxutil to create the folders and then make the '00' directory and number the messages appropriate and move then in. Then I run reconstruct on the mailbox and it works great. The problem is that all the messages are now unread. How do I make them read again???
keith

I had to do a similar migration from a different mail server. I migrated the messages to each user via IMAP, using a Perl script.
The Perl script would determine a few message states and set the IMAP flags appropriately.
I don't recall seeing anything in the docs about setting message states directly. However, in your case, it appears you already have the messages in seperate files. You could try loading via IMAP and setting the flags. I used the NetxAP perl module from CPAN. An alternative, there is an import utility for iMS2. I haven't used it, but you could convert the mail to UNIX mbox format and then load into iMS52.
HTH,
Roger S.

Migrating forms to 11g - problems with absolete built-ins

Sorry if it's the wrong section, but nerves are kicking in and I'm lost.
I've been trying to migrate an old, probably 8i database with its tools and forms into 11g. All software seems to run fine, but when I try to run the forms I either get "this form was made using an old forms builder" error, or worse - some enigmatic FRM and ORA (exception 6508) errors apparently connected to lack of some procedure called in the form triggers.
Now you'd probably say "just recompile those forms". But I can't - I get tons of compilation errors, mostly comming in from absolete built-ins or trying to select from system views. That happens when trying to recompile libraries referenced by those forms, which is probably why i get those procedure lacking errors.
Since the ammount and nature of those overwhelmed me I tried using Forms Migration Assistant...talk about betting on the wrong horse. First I had to change the 'start in' property of the assitants shortcut to where i stored the forms/libraries or else it kept throwing the libs out of said forms. Then I got a bundle of pld files and the most important libraries unchanged, with no mention of any problem in the assistants log. Needless to say my forms still get those procedure lack errors.
I'm pretty sure I can somehow handle correcting the forms if the libraries were ok, but I just can't cope with those problems:
-what to do about system view selects in triggers and library procedures? The compiler just treats them as unknown identifiers. I had the same problem elsewhere and it was about privileges, but this time I can't identify the user from whom those privs are read (in fact, isn't it whoever is using the form at the time?) so far I've noticed it try to use dba_users and dba_roles
-what to do to correct a library (which can have dependencies on other libraries) to be compatible or at least compile'able with the new Forms Builder without spending a year on it all?
I've tried applying changes mentionned in the assistants log (like changing RUN_PRODUCT calls to RP2RRO.RP2RRO_RUN_PRODUCT), but it didn't do any good

Well for me the forms were ok to open with 11g, just had to correct differences and recompile to run.
That there script is a ton of help!..well you forgot to mention the Output_File parameter, but I could find that myself now that I knew what to look at. Now if I could also set it not to produce .err files when everything went fine and to set the output names so that the old compiled forms get overwritten..
the SRW.* calls turned out to be things used in Reports, so it was hopeless to compile in forms..but also not needed
as for ENABLE_ITEM and DISABLE_ITEM I found these to use as their definitions in a library, that proved sufficient.
procedure enable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_true);
end if;
end;
procedure disable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_false);
end if;
end;Some forms still playing with me, but the compilation issues there don't seem to be connected with this topic..and now I got issues with reports >.< but that requires a topic elsewhere. Thanks all!

Migration monitor - Reload DB problem

Hello everyone,
I just migrated an SAP system from linux platform to windows problem, everything went well, and now, I would like to overwrite the current database with a new EXPORT files.
I exported the source system again, file structures and its contents were created well, and then I would like to import the EXPORTS into the system again, without using sapinst tools but using sap migration monitor, with command : import_monitor.bat
during the import, I met difficulties, please refer to the pictures I attached.
Do I need to remove all database objects before I reload the db again.
Please share your experience. Thanks a lot
Fresh

Hello
You're true Distmon won't recreate the Oracle instance, database, datafiles & so on.
Distmon is only loading data in an existing DB.
You could reset all the already created/loaded objects using the drop user cascade command.
drop user sapsr3 cascade;
This will delete all the objects related to the SAP schema but will leave the DB, tablespace and datafiles
Regards
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_9008.htm

Migration Assistant Wrong Password problem

Hi,
I cannot login after using Migration Assistant to move user account from iMac to MacBook Pro. I reinstalled system with erasing all previous data. So now I have one administrator account (the one I moved from another computer) password which works on previous computer doesn't work at laptop at all. I reinstalled system again (without erasing the disc). Password didn't worked again. Now after putting Install Disc and pressing "C" during restart laptop ejects the dvd...
Are there any other options ??? :-/
I've just read that different versions of system (both Leopard) may cause this problem but how to reinstall system now?
I've read that migrating from newer version might be a problem...
Message was edited by: Igor_Szu

instead of using c, try holding down option. you want to hold down option right after the computer chimes. Keep holding option till it gives you choices like "Macintosh HD" and "Install DVD"
http://support.apple.com/kb/ht1274 explains how to use the system disk to restart the password. try clicking on "Resetting the original administrator account password." (assuming you can get the cd to work)
if you reset the admin password, and you can't login
try resetting the root password. reboot to the disk, choosing login as other user. user name "root", and what ever password you set root to.

Migrating and upgrading Essbase-problems with modifying nightly batch scripts

We are upgrading and migrating Essbase from 6.2 Unix to 7.0.1 Windows. We are in the process of modifying the nightly batch scripts that take SAP data and upload into Essbase. Thusfar the dimension build is working, but the dataload has not. Has anyone else done a similar migration/upgrade?ThanksBonnie Bedzin408 737 5613

Report script is a text file there is nothing to create a problem.
You can migrate using file system copy or migration wizard.
If you want you can craete a report script in the target server by copying the content from the source.

Migration from MySQL - connection problem

I've just installed OMWB 1.3.1 for WINDOWS and created repository in ORACLE 8.0.5 DB.
When I enter Source Database Details in Capture Wizard and push Next button nothing is happened. In OMWB log-file I've found the following message among many others:
Exception occurred during event dispatching:
java.lang.NoClassDefFoundError: org/gjt/mm/mysql/Driver
at java.util.Vector.<init>(Vector.java:128)
The directory C:\Oracle\oracle81\Omwb\drivers\
is empty while in CLASSPATH env variable I've found the following item:
C:\Oracle\oracle81\Omwb\drivers\mm.mysql.jdbc-1.2a
If anybody could help me to solve this problem, please let me know.
Thank you in advance.
null

Hi Vladimir,
I send you a message from the Migration Workbench team that solved my problem. I hope this will resolve yours too.
Bye,
Pierfrancesco
Hi Pierfrancesco
MySQL 3.22, 3.23 Requirements
In order to migrate from MySQL to Oracle, you must install the MM MySQL JDBC
driver release 1.2a on the same system as the Migration Workbench. You can
obtain this by downloading the MM MySQL JDBC driver from the WorldServer Web
site at:
http://www.worldserver.com/mm.mysql
Copy and unzip the mm.mysql.jdbc-1.2a.zip file to your
%ORACLE_HOME%\Omwb\drivers directory. This automatically creates a new
directory called
mm.mysql.jdbc-1.2a within the drivers directory.
Can you please verify that you have this driver extracted to the above
specified directory. Another check you can do is see whether all the files in
the zip
have extracted.
Please refer to the Release notes which you have access to by selection the Help
drop down menu in the Workbench.
I hope this helps
Best regards
Oracle Migration Workbench Support
null

I have Migration Assistant/Adobe Installer problems

I have just used the Migration Assistant to move to a new Mac, and all the Adobe suite has transferred over, but the Adobe Installer and the Mac is asking me to reinstall the Installer. When I do this, the installation process begins, but then tells me it needs the Installer in place. Chicken/Egg/Egg/Chicken. What do I do now?

You may need to UN-install, run the cleaner, and RE-install
Discussions of RE-installing
-using the cleaner after uninstalling and before reinstalling will usually help
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

After migration to new iMac - problems with Microsoft office 2008 using multiple users

I migrated my data from my old Imac to my new Imac. On the new Imac I created multiple logins for my kids. My microsoft office 2008 programs will not open. I keep getting the "Customer Experience Improvement Program" screen which cycles through, checks for update then closes never allowowing me to access the program. Please help!!

Reference your first post - I download and use dmg files, so either I'm lucky or they are supported.
I would try the disk reinstall since at this point there doesn't seem to be many options.
Do you have a backup? You could restore the Microsoft Office 2008 folder.

Migration assistant (from WIN) problem with emails:

Hi there
I am a new user dealing with my first mackbook pro.
For first I have used the migration assistant to trasnfer data from my old win7 pc. For time reason, i have used it in two-three different times. Theproblem now is that when I've tried to transfer my email boxes, the software recognizes the user in win and wants to create an other user in mac.
This way, I have a second user with all theworking boxes.
Obviously, I would like to have only one user with all the boxes.
How can I do?
I even tried to transfer the boxes from one user to the other, using the "export" command in Mail.
My the way, when importing in the right user i get an error message:
"Impossible to import some messages" if i try to use the "Apple Mail" option
or
"mbox elements not found" if I use the mbox element options
thanks
p.s. sorry for my english, I'm italian!

Our local Time Machine Guru Pondini has set up a very informative website on this (and other things).
Have a read here http://web.me.com/pondini/Time_Machine/19.html
Stefan

Migrate assistance / Mail application Problems

Hello,
I bought a new Macbook Pro Lion, after I powered the mac, went to utilities app to use migrate assistant app to install my time capsule back up.
Because I used the same name of the home folder whenI first booted the mac, it asked me to open a new user (standard user) in order to transfer from the time capsule back up to replace the admin user.
I did so, everything went fine, until I opened my first admin user and apparently the name has changed, and now in the users folder I can see 2 home folders one xyz and the other xyz1, so it is kind of confusing. the xyz has most of the folders but empty, as the xyz1 has everything but the application folder emply.
I opened most of my applications to check if the info were transfered successfully, from iphoto to itunes, etc.. mostly everything apparently was fine, but not MAIL, I open the mail, it took most the accounts but it does not show the main window for mail, and if it is open it does not allow me to quit the app, so I had to forcequit couple of time, and still when ever I try to open it, it doesn't work.
Now I m thinking about restoring my Macbook Pro to the factory setting, and start fresh, but I don't know from where and how to do that, can you please help me.
Thanks

Setup Assistant is usually recommended instead of Migration Assistant:
http://web.me.com/pondini/Time_Machine/19.html
Regards,
Colin R.
PS Cmd+R to get into Recovery mode where you can reformat your machine?

Xcelssius 4.5 migration to Xcelsius 2008 - problems

Hi,
I am trying to migrate some Xcelsius models from 4.5 to 2008 and found a number of issues - please can anyone else confirm if they have experienced the same things or if there are fixes for them:
- on bubble charts you can no longer edit the data labels as the options screen for them (appearance>text>data labels) is broken.
- Flashvars no longer work and need to be rebuilt.
I have seen other people mention that formatting issues are to be expected when converting models to Xcelsius 2008 but have seen no mentions of these specific errors before.
thanks
Keith

re-posted in Xcelsius forum

Migrate GLCS2 to DWCS4 problem.

Similar Messages

Maybe you are looking for