Migrate I Tunes and I phone from work laptop to new Mac I bought for home

I've purchased a new Mac and I want to migrate all of my I tunes to the new computer from my work laptop (PC- XP) to the Mac. I also want to then sync the I Phone with the Mac rather than the laptop (currently the laptop is "home" for the I Phone). How do I do this without losing any of my songs- some of which were purchased and some of which were uploaded from CD? Also, can I re-home my I Phone to the Mac without losing all of my phone numbers, addresses, etc?
thanks!

The Apple Store will do this for you or you can call Apple Support and they will help.

Similar Messages

I have iPhone 4 and I have purchased this from Dubai and now I am in India but now my phone didnot working here .so plz give me solution for this so I will use this in India.can I factory unlocked my iPhone by apple store at jaipur india

I have iPhone 4 and I have purchased this from Dubai and now I am in India but now my phone didnot working here .so plz give me solution for this so I will use this in India.can I factory unlocked my iPhone by apple store at jaipur india

ONLY the carrier it is locked to can authorize unlocking it. Most have restrictions in that you must be a current customer and have maintained service for a minimum period of time. Do yourself a favor, sell it and purchase a phone in India instead.

I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Set up iCloud on both devices
How to set up iCloud on all your devices
http://www.apple.com/icloud/setup/

How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?

How do you get your tunes and voice recordings from your iPod Touch into iTunes on a new computer if you don't have Mobile Me?
iTunes on tmy new computer shows none of my data and I fear if I sync my iPod with the computer all will be deleted on the iPod.
I still have everything in iTunes on the old computer.

Just move your iTunes library to you new computer. You can transfer iTunes purchases to you new computer from your iPod by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT1848Make sure you also move the backup. You an find where the the backup is located here:
iPhone and iPod touch: About backups
You can move other items by:
Best iPod to PC
After you move you stuff to the new computer, restore the iPod from backup.

How to migrate the RPD and catalog file from siebel analitics to obiee

hi all
How to migrate the RPD and catalog file from siebel analitics to obiee and obiee to obiee 11g
Thanks
Sreedhar

hi sreedhar,
you can migrate from siebel to obiee 10g...check this out http://debaatobiee.wordpress.com/tag/migration-siebel-analytics-obiee/
Next install OBIEE 11g and migrate obiee 10g to 11g using this http://prolynxuk.com/blog/?p=424
hope answers your questions.
Cheers,
KK

Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it

After using headphones for about an hour both my built-in speak and head phone stop working

After using headphones for about an hour both my built-in speak and head phone stop working, what could be wrong? I have checked system preferences and all appears ok there but still no sound

Your put your Air into sleep mode with headphones attached, I assume.
Upgrade to the latest OS to resolve that issue.
10.9.2 Apple icon upper left "software update"

Hi i took my wifes phone and backed up on her computer , then i deleted everything from her phone and made restore from my laptop (my old phone ) , now I want to restore wifes phone back but on her itunes can't see her backup (only see mine). please help

hi i took my wifes phone and backed up on her computer , then i deleted everything from her phone and made restore from my laptop (my old phone ) , now I want to restore wifes phone back but on her itunes can't see her backup (only see mine). please help

Thanks for responding but the link seems to be relevant to Windows. Is there a similar method for Android phones?

I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop and i have to put in screen lock for it to even play! Anyone know how I can fix this ?

I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop and i have to put in screen lock for it to even play! Anyone know how I can fix this ?

AshleyG0990 wrote:
I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop
What you did was sync it to a computer. The iPhone can sync to ONLY one iTunes library at a time. you can't put media on it from multiple computers. It's been this way since 6/29/2007.
i have to put in screen lock for it to even play
Completely different issue. What did you think it would do when you set a passcode for the phone?

HT1386 i have the 64bit i tunes and my phone still wont sync

i have the 64bit i tunes and my phone still wont sync

"This iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64-bit version of i tunes" this is the message that pops up when i plug my phone in

Migration of PO and GR qty from legacy system to ECC 6.0

Hi
All
I have small issue.
PO with 100 pcs.
GR done for 60 pcs
Invoice received 60 pcs
Invoice paid 60 pcs
business says they don't want to upload the history of what's been setteled in the legacy system.
Now the balance qty is only 40 pcs
How can i migrate such PO and keep the GR history in ECC 6.0. without MIGO for full qty of PO
greatly appriciate the input.
i need to write the functional specs for this Migration goods recept for interface.
thanks

thanks for the answer.
They want to see the PO is active with open qty 40 pcs and accept the balance 40 pcs when GR is done..
that is my problem.
any help please.
thanks

Migrate from old G4 to new mac mini

how can i migrate from an old mac without airport to a new mini? i have them connected by a firewire cable.

See the following: Transferring files between two computers using FireWire
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications Screensavers written for the PowerPC System Preference add-ons All Unsanity Haxies Browser and other plug-ins Contextual Menu Items Applications which specifically require the PowerPC G5 Kernel extensions Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In MacsApple Guide to Universal ApplicationsMacInTouch List of Compatible Universal BinariesMacInTouch List of Rosetta Compatible ApplicationsMacUpdate List of Intel-Compatible SoftwareTransferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following: >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful; MacBook Air- Migration Tips and Tricks; MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 4/17/2011

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
Only the carrier to whom it is locked can authorize it's unlocking. To do so, the user much contact them to start the unlock process.

Secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

Hold down Option key while clicking on menu bar and Save as will appear.

Migrate I Tunes and I phone from work laptop to new Mac I bought for home

Similar Messages

Maybe you are looking for