Migrate Mail Preferences from Mountain Lion to Mavericks & Sync w/iCloud

1. How do you migrate Mail Preferences, specifically Signatures and Rules, from OS 10.8.5 (Mac Pro) to OS 10.9.5 (MacBook Pro)?
2. Why won’t Signatures and Rules upload/sync with iCloud Mail?
Migration Assistant doesn’t work and I’ve already spent a week total trying to resolve this issue once and for all.

Similar Messages

Why I can't restore mail backup from Mountain Lion on Maverick ?

When I use Time Machine to restore my old mails, it doesn't works, shows the backups on the right but I can't click. The Backup was made on Mountain Lion and I installed a clean Maverick.

Try this. To see all mounted volumes shift - command - c. Information learned from Linc Davis.

IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth          (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5%          backupd
5%          Mail
5%          WindowServer
3%          Finder
3%          Dropbox
Top Processes by Memory:
1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB          Finder
74 MB          Mail
49 MB          softwareupdated
49 MB          Dropbox
Virtual Memory Statistics:
97 MB          Free RAM
1.21 GB          Active RAM
1.19 GB          Inactive RAM
1.21 GB          Wired RAM
1.83 GB          Page-ins
36 MB          Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core

... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

I have upgraded from Mountain Lion to Mavericks, since then my Adobe Flash Player don't want to work?

Hi, can anybody help me please, i have upgraded from Mountain Lion to Mavericks, since then my Adobe flash player don't want to work.
I clicked on update and downloaded the update from Adobe and installed it.
Every time i get an error saying - "that this wasn't downloaded from App Store".
i can not find it in App Store.
What must i do?

Try this: in your Utilities folder launch Adobe Flash Player Install Manager and run it to completely uninstall Flash. Then go to http://get.adobe.com/flashplayer/ and download Flash
Once downloaded, double-click to open it and run the installer. If you get a message saying the file can't be opened, or similar, Control+click or right click and select 'open' and should then be able to proceed to install it.

I just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

After upgrading macbook pro from mountain lion to mavericks computer performance slowdown

after upgrading macbook pro from mountain lion to mavericks computer performance slowdown

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again?

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again? Just a patch/update or do I need to uninstall and install?

antoniobesteban wrote:
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
Where are you seeing that information? Got a link?
According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
Plenty of people, including me, are currently running CC on Mavericks.

Since updating my Mac Book Pro from Mountain Lion to Maverick the computer is running slowly. Its slow to open and slow to download

Hi since updating my Mac Book Pro from Mountain Lion to Maverick the computer is running slow

When you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR 2530 driver installed. after i reset my printer, the driver is not showing from Printer Software. could you guys help me to solve these problem?

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR2530 driver installed. after I reset my printer and add again(Canon IR2530), the driver is not showing from Printer Software. could you guys help me to solve these problem?

Maybe this thread will help:
https://discussions.apple.com/message/23873672#23873672

Import messages chats from Mountain lion to Mavericks

Hi,
I erased my MacBook Air which had Mountain lion installed in and just performed a new install of Mavericks. As I don't have Time machine anymore, I backed up all the data (including Library folders and stuff) in a hard drive.
The only issue I have is about restoring my data from the previous system's messages.app.
In the new Mavericks Messages.app, I can't find out how to import my old messages back. I tried to put the saved ~/Library/Messages/Archive folder in the new one, and even in the ~/Library//Containers/com.apple.iChat/Data/Library/Messages folder (I've noticed this path in another forum). But nothing works.
Any idea, folks?
Thanks.
Ken

Hi,
Did you change the Ownership of the files ?
Whilst you may have used the same Info from Mountain Lion to set up the Admin account and/or possibly your Mac User account as well then the computer will still regard them as being owned by someone else.
Find the files again (or the folder in the case of the Archive one)
Use the Get Info option when you right click.
Scroll to the bottom in the info Panel and check the Ownership.
I don't see that you put the chat.db items back in the ~/Library/Messages folder (with the other .db items as well.
10:18 pm Saturday; March 8, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
thanks

Hi BobRz,
As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD ?
2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
Thanks.

I went from snow leopard to mavericks and skipped the whole mountain lion stage. Should I have airplay? If so, where is it so I can connect to my apple tv, it is not in my display options like my friend who went from mountain lion to mavericks.

Do you need Mountain Lion if you have Mavericks to have Airplay to connect your computer to your apple tv?

A supported Mac
AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring when using OS X Mountain Lion or later:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013 or newer)
From here > About AirPlay Mirroring in OS X
AirPlay is not just about Mavericks. It depends on which Mac you have as noted above.

Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

Will the performance of Final Cut Express, currently running under Mountain Lion OS X 10.8.5 (12F45), be improved by upgrading to Mavericks?

Ian R. Brown wrote:
. . . . but you will need to have Mavericks installed to use FCP X.
Should you feel the urge to give it a try, this website has a free 2 hour course of video tutorials that will get you off to a flying start.
http://www.izzyvideo.com/final-cut-pro-x-tutorial/
There are some 26 "bite-size" lessons so it's not too daunting.
Quite right Ian.
Probably should have mentioned it.
Al

Error when upgrading from Mountain Lion to Mavericks

Has this happened to anyone and what did you do to resolve it? Error: "install failed - The OS X upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired. After your computer restarts, back up your data, erase your disk, and try installing again."

OK,
I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
Backed up to an Time Machine Drive
Reset the EPROM (zapped it or whatever they kids these days are calling it)
Booted off a Mavericks USB stick.
Ran Repair Disk & Repair Permissions
Installed Mavericks
Worked fine, took a while but up and running.
Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
Eoin
<Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!)

Migrate Mail Preferences from Mountain Lion to Mavericks & Sync w/iCloud

Similar Messages

Maybe you are looking for