Migrate old G4 to new Mac Pro

I'm helping a customer set up a new Mac Pro. They have an old G4 and would like to migrate Photoshop and Illustrator files to the new system.
I'm aware of the Firewire cable + Target Disk mode, and I know it could be done over ethernet as well.
I'm wondering about simply opening up the G4, taking the hard disk out and putting in an empty bay on the Mac Pro. Obviously we wouldn't try to boot from it (it has Tiger) but my question is simply one of drive compatibility. Would the new Mac Pro be able to use the HDD from the old G4?
Just looking for painless, easy and cheap. I have replaced HDD many times so that's not an issue, I just don't know if it will work.
Thanks in advance for any and all assistance.

"...my question is simply one of drive compatibility. Would the new Mac Pro be able to use the HDD from the old G4?..."
No. Not cleanly at all. The Mac Pro's use SATA drives while the G4 would have IDE drives. They are different interfaces. You could potentially get an adapter, something like this to get your connections worked out. However, this issue is still going to be where to physically put the G4's drive inside the Mac Pro. An SATA drive would fit into a bracket, and simply slide right into all the appropriate connections (Power & Data).
But the adapter card you'd have to install to make the IDE drive work, will also prevent it from working as well. Hope that makes sense.
An alternative may be to buy an external Firewire enclosure, ready for an IDE (or "ATA") drive and put the old G4 drive there. Simple and clean - guaranteed to work.
An internal solution does not seem possible to me.

Similar Messages

  • Old hardrive in new Mac pro

    I bought a second internal hardrive for my old 1.6 G5. I bought it from an apple reseller so assume it is the standard type. Can I install this in my new Mac pro 2.88 (when it arrives)?
    Also, I want to use this hardrive with logic and some third party plugins. What is the best way to configure this. Applications on main hardrive, all audio files and samples, sample libraries (including those for logic) on the second Hardrive? Any advice on utilising my hardrives for music produciton would be great
    Cheers

    You have four drive bays. Spread everything out. Your old hard drive is likely a couple years old. I would reformat it (which you need to do anyway to GUID partition table format for INTEL Macs) and use it for an emergency backup clone of your system and put it someplace safe. Off line, maybe in FireWire/SATA case.
    I'd look into 3 x 500GB drives from WD. 750GB if you want even better performance.
    Don't use Migration Assistant for any PPC applications, just for preferences, settings and data.
    Music and audio benefit nicely from 4 drives.

  • Old hard drive, new Mac Pro?

    My G5 power supply died so I bought a new Mac Pro. Can I install the old G5 hard drive into my new mac pro and boot up??
    Thanks, beth

    If you have a G5 that uses SATA drive then you can install it however you will not be able to boot from it. If you have a PATA drive then you can always install it in the 2nd optical drive bay but you need tohe right brackets to have it secure.

  • Migrating old account to new Macbook Pro

    I got a nice new Macbook Pro (2010 version) with the i7 processor. I had to get a new cable to migrate my information from my old Macbook Pro (2006?)so I performed the migration the next day. The computer ran fine for several days until I rebooted it. All I got was part way through the boot and gray shadowing came down the screen and the message to force shut down the computer came up.
    The computer could boot into safe mode. Tried to reinstall the system with no luck. Hardware test showed the computer was fine. Started in verbose mode <command-v>, which seemed to show that "com.bresink.driver.BRESINKx86Monitoring(3.0) was the culprit.
    I found that in /Library/StartupItems and removed it. Computer started fine!
    I think that file is associated with the iStat widget and is not compatible with the new processors. I hope this post saves someone else all the worry that I went through

    That file has nothing to do with iStat Pro — it's part of Marcel Bresink's *Hardware Monitor* utility. I suspect you probably had an outdated version of it that was incompatible with your new machine or its OS.

  • Migrating your old Mac Pro to your new Mac Pro issue's with Adobe Software

    I Have just bought a new Mac Pro and after migrating the information from my old Mac pro photoshop and other Adobe software are not loading
    HHow do I fix this problem?

    Try uninstalling the programs from the old Mac and installing them on the new Mac

  • I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

    Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
    Hope this helps.
    MtD

  • I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • How can I migrate data to new Mac Pro with only 1 monitor

    I am ready to set up my new Mac Pro.  I know how to migrate my files from my G5 using Firewire and making the new computer a target disk.  My problem is, I have only 1 monitor.  Is there an easy way around this, OR of not, can I use my Macbook Pro just a monitor and if so how? 

    If you make the new computer a FireWire Hard drive, the only thing on its monitor will be the firewire symbol. You don't need a monitor to see that.
    But if you did, you could start the new computer up first, look at the firewire symbol, get a warm fuzzy feeling, disconnect the  monitor and plug it into the old computer to make the transfers.

  • I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion.  There is a step that asks for a "passcode" to proceed.  I have no idea what that passcode is.  It seems to want a numeric code.

    I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion.  There is a step that asks for a "passcode" to proceed.  I have no idea what that passcode is.  It seems to want a numeric code.  Has anyone had this experience?

    This general-purpose article gives detailed step-by-step instructions for using Migration assistant, Setup Assistant, and other mehtods, and discusses the Pros and cons of each mtheod. It is very approachable and easy to understand. Wriiten by Pondini, the resident Time Machine guru.
    Setting-up a new Mac from an old one, its backups, or a PC

  • After Migration to new Mac Pro, intermittent slow downs, SROD's

    I started with a my intel mac mini, Leopard OS was installed on an external Firewire drive, most applications were installed on another partition of that same drive. I bought a new mac pro 8 core, and an additional firewire external drive that I set up as my Time Machine drive on my old mac mini. I did a full backup of my old mac mini system and then attached the time machine drive and the other external hard drive to my new mac pro. I used the migration assistant to transfer files to my new mac pro. However, now there appears to be something occuring between my internal mac pro hard drive and the old external hard drive from my mac mini. When using some applications, Itunes, Logic Pro, Firefox, the ap will hang and appears to be trying to access files from the old external drive. I hope I'm being clear with what the issue is. I'm thinking duplicate files on this external drive and my internal drive are causing some problems? I need to know how to repair the issue, and preserve my data files?

    bb240z wrote:
    Thanks for your quick response. I know I've been somewhat confusing here. I'm running the latest Snow Leopard update on my mac pro now.
    Then please update your profile, as it still shows the mini and Leopard.
    And I'll ask a Host to move this to the Snow Leopard > Time Machine forum.
    All the aps and data were migrated onto the internal HD in the mac pro, and the aps and files and directory structures, etc. are still also on the external drive that used to comprise the OS of my mac mini. I'm thinking that may be part of the issue, but I'm new to Mac and not certain of that or how to fix the issues.
    Depending on how you did that, I'm not sure everything on those partitions got on to the new Mac's HD. Check that first, via the Finder.
    Let's start with iTunes and/or iPhoto.
    First see if you have the same stuff in both places. Use the Finder to see how large each is on the external HD, and compare that to the iTunes and iPhoto folders on your internal HD.
    If they're not on your internal HD at all, use these instructions to move them:
    Moving your iTunes Music folder
    Moving your iPhoto library
    If the versions on the external are newer than the ones on your internal, delete the ones on the internal and use those instructions to move from the external to the internal.
    But don't delete the versions on the external just yet. Eject and disconnect it, and make sure everything's fine. It won't hurt to leave the data there for a while, especially as long as it's disconnected.
    If the music or photos on your HD are the same, or newer, hold down the Option key while starting iTunes or iPhoto. That will give you a prompt where you can select which one you want to use.
    Once you've selected the ones you want, eject and disconnect the external. Then use as many apps as you can, to see if everything works properly and all your data is found.
    Without knowing what other apps you have, and how they work, I can't tell in advance whether any others will be looking for the external drive. If you get error messages, you'll have to deal with each app that seems lost.
    I'd be inclined to keep the old external "on the shelf" for quite a while, just to be sure nothing got missed.
    Have you started doing Time Machine backups of the new Mac yet? When you do, you'll get a prompt about whether to "re-use" the Mini's backups. See #B5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum. You probably want to select "Re-use," especially if there's a considerable amount of space on your TM drive.

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • Do I need to deactivate my Creative Suite 6 before I pickup my new mac pro? or will the migration assistant do all of that?

    I am picking up my new mac pro tomorrow and wasn't sure if I needed to "deactivate" my Adobe products before I change over to my new Mac, or does the "migration assistant" do all the work?   thanks for any help.

    Nope. Migration does not work with any Adobe software. Don't even try it, it will cause a lot of huge problems.
    Deactivate your software on the old computer. Install it from the original installer on the new one, don't forget to install all upgrades which are available in the meantime.

  • Migration Assistant and permissions issues with new Mac Pro

    Hi There,
    I've not had any significant issues with Migration Assistant in the past but I can't create a reliable system with my new Mac Pro.
    After using Migration Assistant during the initial setup, my user account wasn't even transferred. I tried restarting but in the end, I followed these instructions to reset and run the assitant again: http://stationinthemetro.com/2013/11/10/make-mavericks-re-run-the-setup-assistan t
    I've just finished running it for a second time, and while the user account is now on my new system, there are so many permissions issues that the system is unusable (I can't even run Safari). Creative cloud, 1Password, safari, Dropbox are all apps that give me Disk i/o or permissions errors.
    If I look in the user folder, many directories within it have a red minus icon. I've tried fixing permissions using Disk Utility but something is not right.
    In the past, the new system just boots like the old one but this time round, it asked me to create an account after Migration Assistant had finished - is this normal? I used the same username and password as before but I'm not sure Migration Assistantis working properly.
    Does anyone know a full-proof way of fixing and transferring my account without having to spend hours downloading OSX for a full erase and install?
    Any help would be much appreciated.
    Cheers
    Ben

    Thanks for the reply,
    I didn't understand exactly what to put into AppleScript sorry (never used it before) - so I just ran the following from the Terminal:
    $ echo $UID
    $ sudo chown -R 503 ~
    And restarted - everything works now - thanks heaps.
    What had happened and is this something I did or did Migration Assistant just get confused?
    I have 3 new Mc Pros to setup on Monday so just want to ensure those are hassle free.
    Cheers
    Ben

  • HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

  • I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time.  However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

    The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
    My new Mac Book Pro does not have home vault open.  But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available.  Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop? 
    When I go into the time capsule - it shows me NOTHING as being in the backup datas.  So, I don't know where to begin to delete all the old data off the
    time Capsule and start with a completely empty machine. 

    Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
    Here is how to do this:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Disks icon at the top of the AirPort Utility window
    Click the Disks tab below the icons
    Click Erase
    The "Quick Erase" option will only take a moment or two
    Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

Maybe you are looking for