Migrate one HDD to different Storage

Hi Guys,
in our LAB we have two VMS with two differents HDD attached it to it,
lately we have attached extra storage and want to move one HDD to different storage
Disk 1  is 40 GB on the SSD Hard disk 
Disk 2 is 1TB on Sata Hard Disk.
I want to move jus the disk 2 of  1TB to a different Data Store. and keep the Disk 1 on the SSD Data store.
i'Ve looked arround and saw there is a vMotion Data but its migrate the whole disk to one Data Store.
any suggestions how to do this ?
Thank you

You can use the Advanced Option on Storage vMotion to select just the disk you want migrate, take a look: Storage vMotion only one hard disk to another datastore in vSphere | ICT-Freak.nl

Similar Messages

  • How to run MRP on different storage location level ?

    Dear Experts,
    Need your valuable guidance to solve the below requirement form the client-
    1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
               For sake of example: in SL01 he wants the safety stock for particular material set to 5
                                  In FS18 he wants the safety stock set to 2
                                  In FS15 he wants the safety stock set to 1
    Kindly tell me whether it is possible? & guide me how to do it.
    2) Also tell me how to run MRP on a storage location level?
               This is because after maintaining different safety stocks for one material in different storage locations,  is it possible to appear each storage location with their differing safety stock levels?
    I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
    Kindly guide me for the above issue
    Thanks in advance for your support.
    Regards,
    Mehul

    Hi Umashanker,
    Thanks for your suggession . Accordingly I have resolved the issue.
    Regards,
    Mehul

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • Picking quantity from a different storage location during batch split??

    Hi Gurus,
    Have an issue with doing batch split in a delivery with batches from several storage locations.
    Have delivery XXXXXX where I want to pick batches from several different storage locations.
    I click on the batch split button and select the different batches and quantitys.
    The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
    The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
    My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
    The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
    Thank You for all Your help!
    BR,
    Christian

    Hi Christian,
    you have not jet got an answer  -- here my suggestion.
    You have to use the Userexit Mv50afz1. Here you can do some checks and  you can do a popup, where you can sign the LGORT, where the batch is.
    In any case, you need an ABAPer
    In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
    In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
    But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
    If nessesary create an ylips- Line of the position.
    Use an assign-command to avoid the change of the index.
    hans

  • Could WM setup same location in different storage location type ?

    Hi
      Now we have same part  but which is bought from different vendor by currency RMB or USD.
    We hope when we receive material,  it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
    If there is any advice, please tell me , Thanks
    Thanks
    Alice

    Hi, Expert
    Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
    We use migo to receive these mateirals , most are in WM module, Some in IM module.  Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails. 
      To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
    So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
    Thanks
    alice

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • Wifi sync 2 iPhones in one iTunes with different Apple-ID's.

    Wifi sync 2 iPhones in one iTunes with different Apple-ID's. My Phone will show up in iTunes, my wife's wont. After plugging my wife's phone into my Win 8.1 pc and check Sync over wifi, I hit the eject button, could this be the reason? Or might it be the different Apple-ID's? If the answer is the first, is there any way tohave iTunes forgetmy wife's phone so I can addit from scratch?

    Ello,
    I know this, but thats in the past now sadly. The question is: Why wont my wife's iPhone show up in iTunes via wifi?
    Is it because I pushed the eject button? And if so, is there any way I can make iTunes forget my wife's iPhone and *** it from scratch again?
    Or is it because the phones uses different Apple-ID's?

  • One Key FIgure in more than one column with different restrictions

    Hi,
      I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

    Hi Pravender Chauhan,
        If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
    If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
    Assign points if Useful.
    Regards,
    Rajdeep.

  • I have 2 Apple iPads with the same Apple account name.  How do I set up one with a different Apple account name?

    I have 2 iPads with the same Apple account name.  How do I set up one with a different Apple name?

    Why is the reason you want a different apple id on them? Need more details to make sure we don't accidently set up the self destruct feature and destory the planet.

  • Is there a way to view all favorites on one page from different albums?

    is there a way to view all favorites on one page from different albums?
    I can't seem to figure out how to view all favorites at one time.
    nothing (thus far) is shared.
    paid membership to revel, also.

    oops - apparently you can do this from the app,
    but not from the web login view.

  • Best practice for presenting different storage vendors arrays..?

    Hi, can't seem to find a specific answer in writing on this.
    Typical FlexPod already deployed, with different vsans on different n5ks.
    Uplinks from UCS / NetApp are FCoE.
    So I now want to present some normal FC (not FCoE, nexsan) storage to the same blades on the UCS system via the n5ks.
    My main questions are can I use same vsans / vHBAs as for NetApp storage, or should you be creating different vsans and vHBAs for different storage vendors?
    If multiple vsan is recommended, is Trunking multiple vsans over FCoE from UCS to FC fine, I'm sure it is but just want some experience on it.
    Thanks!

    Thanks guys for the input, interesting to see there is a difference of opinion on this topic. Makes me feel happier that I'm not being too stupid and someones posted back a link to a best practice guide on the subject that I've blatantly missed! (still time for that no doubt!)
    Like I've said, I haven't found anything specific in writing on this, but keeping vendors on seperate vsans / hbas feels like the best way to do it anyway with only a little extra config in the grand scheme of things.

  • Outbound Delivery created between two different Storage Bins

    Dear Guru ,
    Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
    Thanks

    Hi,
    Between storage bins only transfer posting is possible as per my understanding.

  • Sale of same material from two different storage loactions

    hi,
    how can i configure to sale same material code from two different storage loactions?
    for eg if material code is 15000 and it is extended in two storage location A and B.My requiremnet is i want to sale from both storage loction at same time A and B both.How can i map it?
    thanks
    Nakul

    Dear Nakul Raj,
    If you want to sale same material from different storage locations it can be done.
    First raise the sales order enter the material code and quantity as a first line item and give the storage location "A" in item shipping tab.
    Then give the same material code and quantity (how much you want to send) as a second line item with storage location "B".
    Then save the document, do the delivery, the storage locations will be copied from order to delivery, if you want to change you can do so.
    Do the PGI.
    Hope it will resolve your issue.
    Please reply if any further clarifications
    Kindly try and let me know the result
    Thanks&Regards
    Raghu.k

  • Movement type for blocking to a different storage location

    Hi Gurus,
    Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
    Regards,
    Kumar

    Hi Kumar,
    344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
    Better use 343 for transfer posting from Block to Unrestricted.
    If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
    Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
    Then try do to TP for different storcge location for same plant with 343.

  • QM/MM: Stock transfer from QI to QI in different storage location

    Hi Gurus,
    I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B – 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
    I don’t want to create another inspection lot and don’t want usage decision.
    Can anyone suggest me the solution?
    Thanks
    Shiv

    Hi Laxman,
    Thanks again for your suggestion to use QAC2.
    Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
    Thanks
    Shiv

Maybe you are looking for

  • JDBC Thin Driverr for Oracle 8.1.5 on NT

    I Installed the above said driver from Cd and followd the instructions givne the documentation and updated as CLASSPATH=[Oracle Home]/jdbc/lib/classes111.zip and when Im trying to make sure I can compile and run the java as said in the documentation.

  • Open/Create file dialog can only create the file

    Hello, Very strange problem I got. The system is LabView 2014, on Windows 8. All 64bits. For long time I was happy and had no big problems with LV. However, after a few months without working on LabView, the LV got the problem. When I'm trying to ope

  • TPESVCFAIL - application level service failure

    #include <atmi.h> #include <fml32.h> #include <fml1632.h> #include <tpadm.h> #include <stdio.h> #include <stdlib.h> int main(void) long len = 0; char lmid[16]; char serverName[64]; char srvID[64]; char srvGrp[16]; char rqAddr[16]; char totWorkl[16];

  • Source system Activation in BI

    Hello All I'm trying to activate Source System (RSA1) in BI System, I'm keep getting following ERROR. BI  unknown in source system BI IDoc type ZWAA003 is not the same as source system IDoc type The following errors occurred in the source system: Inc

  • 64 bi and 32 bit needs

    I have a HP Laptop with a 64 bit Window 7 Home system. Windows update keeps sending me 32 bit updates--should I down load these updates or just update 64 bit components when they are offered?