Migrate portal 306 (Windows NT) to portal 308 (Sun Solaris)

is it possible to migrate portal 306 on Windows NT to portal 308 on Sun Solaris.
the portal on Windows NT has only external portlets integrated into it. is it possible to migrate ...?
any answers would be great help.
thanx a bunch.
null

Yes, it is possible to migrate up to the current release on Solaris, but it's not easy. First, upgrade from 3.0.6 to 3.0.8 on the NT box. Then, export everything from NT to Solaris (import/export only works across the same Portal release). Check out the Export/Import paper here on OTN for more info.
You might find it quicker to manually recreate everything within the new portal instance on Solaris.
Best,
Jay

Similar Messages

Migrate Oracle Apps 11.5.10.2 from Sun solaris to RHE Linux 32 bit.

We are migrating the Oracle Apps 11.5.10.2 from Solaris two node to Linux two node including the database Oracle 10.2.04 64 bit.
Since the applications only support 32 bit we are not able to store CM tier in a 64 bit Linux so with this considerations we are going with the below plan.
1. Install RHEL 5 as a 32 bit for two nodes ( One for DB/CM and FORMS/WEB)
2. Migrate the applications and DB from Solaris to Linux as the same node configuration that is
Node A:
Oracle DB 10.2.0.4 64 bit ( SUN oS 10 64bit) -> Oracle 10.2.0.5 32bit (RHEL 5 32 bit)
Oracle Apps CM 11.5.10.2 (SUN OS 10 64bit) -> Oracle apps CM 32 bit(RHEL 5 32 bit)
Node B:
Oracle apps 11.5.10.2 forms (sun OS 10) -> Oracle apps 11.5.10.2 forms ( RHEL 5 32bit)
Oracle apps WEB 11.5.10.2 (SUN OS 10) -> Oracle apps WEB 11.5.10.2 ( RHEL 5 32 bit).
Question : 1. Did you see any snag on this kind of migration
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux

Hi,
1. Did you see any snag on this kind of migrationWhy would you downgrade the db from 64 bit to 32 bit. As 32 Bit has lot of memory limitations.
You could keep the database on 64 bit for linux too.
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux Please see
Note 238276.1 - Migrating to Linux with Oracle Applications Release 11i
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1]
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
Notice to Oracle E-Business Suite Customers: Correction to Export/Import Notes [ID 1055539.1]
EBS 11i Export/Import Fails On Admsc1020.sql Due To Missing Catmgdidcode.sql [ID 804665.1]
Thanks
Edited by: EBSDBA on Oct 25, 2011 5:30 PM

How to open a new window with no Portal Header and Portal Navigation bar

Hi,
I am working with the EPCM.doNavigate() method and passing the value "1" for the mode parameter in order to open it in a seperate window without the Portal header.
For some reason, the Portal header is still seen in the new window.
Do anyone know the reason?
Thanks,
Aviad
int openType = 1;
"EPCM.doNavigate(\""Url"\", "openType"); \n"

Hi Aviad,
Try out the command
EPCM.doNavigate(\""Url"\", "openType",'toolbar=no','status=no','menubar=no');
<b>Put opentype=1</b>
I think it will work
Thanx & Regards
Anish

Size of the select value window in the portal for a query

Hi,
When I try to restrict the key figures structure in the portal (to select some key figures and hide others), the description of some key figures is truncated. It happens when the description of the key figure has been defined on several lines in the query designer.
Does anyone knows how to increase the size of the lines in the "select filter value" window in the portal?
Thanks,
Gabriel

Major Sparky
Just a supplemental observations
There are certain actions even in the project that remains open that will close the opened, sized, and positioned Project Window.
Also
1. If you go to dual monitor system, typically the program does not remember the dual monitor setup when the project is saved closed and reopened.
2. If you use the project without a dual monitor system and save close project with the Preview Window open, sized, and positioned, when you re-open the project, the Preview Window is gone and would need to be reopened, sized, and positioned again.
ATR

Log in to Windows Azure Management Portal

Hi,
I have a windows azure suscription.
I was login in with my hotmail account to windows.azure.com. Now I can´t log in to my windows azure suscription.
If I go to https://windows.azure.com it takes me to
https://windows.azure.com/VerifyYourAccount.aspx were I need to click a button to send me a message with a code to my cel phone. The problem is I dont use that phone number any
more and I can´t find where to change it to my new cel phone number...
Please help.
G
Where is the windows azure management portal?? The place were I can create and manage host services in my azure suscription, sql azure databases, etc...

Hi Giber,
If you have problem while verifying your account via phone number, please contact Azure support (http://www.microsoft.com/windowsazure/support/) for manual verification. Please see
Fraud Prevention Measure for New Windows Azure Platform Accounts for more information.
Thanks.
Wenchao Zeng
Please mark the replies as answers if they help or unmark if not.
If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

Problem with Windows Azure Management Portal

IS there any issue with accessing all services of Management portal, for last couple of days I am getting message - Unable to get required information for the services (Especially for Virtual Machines)

Hi,
Windows Azure Manage portal runs well on my site, from my experience, there may be something wrong on your site, I found a similar thread, hope it helps, the thread link is:
http://social.msdn.microsoft.com/Forums/windowsazure/en-us/844c511d-09a8-497e-a88c-f3e5b7eb075e/new-management-portal-not-seen-in-ie10?forum=windowsazuremanagement
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Migration weblogic portal 4.0 to weblogic portal 8.1

I am trying to migrate weblogic portal 4.0 to weblogic portal 8.1. I need help
how to do this ?
thanks

I am trying to migrate weblogic portal 4.0 to weblogic portal 8.1. I need help
how to do this ?
thanks

Migration from Sun Java System Portal Server to the Oracle Portal

Hi, I'm in charge of evaluate the viability of a project that comprises the migration from Sun Java System Portal Server to the Oracle Portal. so I'm wondering if there is a kind of out of box migration tool in Oracle Portal or exists some guidelines to do the migration. In the other hand there is the option of migrate from Sun Java System Portal Server to Oracle WebCenter?
Thanks in advance!

The migration path for Sun Portal Server is Oracle WebCenter Suite. WebCenter is a significantly different architecture so there are no tools planned for the migration. However, we do plan to document and publish a whitepaper once we've assisted a few of the initial customer migrations.

Browsing ms-word document directly from portal content window.

Hi,
I must make ms-word document directly browsing from portal content window.
Is there a blog mention about it?
Thanks.

First, thanks for your reply. It's greatly appreciated. However, the level of your response fails to address the scope of the original question. Your first supposition is incorrect, that most MS Word docs copy uneventfully into the body of Gmail emails. This only applies to the most basic of MS Word docs (i.e., those utilizing minimal formatting, such as basic letters, etc.) and otherwise runs contrary to dozens of online complaints posted by users such as myself (though not on the Firefox website). Second, everyone knows you can add an attachment to Gmail emails. In this case, the recipient will not accept attachments of any kind, and has therefore asked that the content be copied directly into the email body. This is not uncommon in these cases. Third, the very nature of Notepad makes it unable to translate/interpret any documents beyond the most basic, hence its name: Notepad. Fourth, apparently this problem is rare or virtually non existent with other browsers, as all the complaints online appear to be Firefox related. Again, however, I appreciate you taking a stab at this.

How to uninstall portal from windows machine?

Hi gurus,
Can u guid me how to uninstall portal from windows machine.
Also please tell me the installation document procedure or document.
Regards,
Shivraj Chalke

Hi!
This depends on your EP release.
For Basis release 6.40 (EP6) there should be an UNINSTSAP.EXE somewhere in your SAP-Filesystem which you need to run. Take care with the options you have, you might delete even the OS-Users (even on the domain) if you just click away without reading.
For Basis release 7.00 (EP7) you call sapinst and select 'uninstall' under 'Additional Software Lifecycle tasks'. This will guide you through the process of uninstallation.
If these operations fail you can manually clean the system by removing the files and cleaning the registry. This is only a sort of last resort though.
Regards,
Jörg

Close Portal Browser Window?

I have a custom R/3 transaction that I am calling from the portal using the com.sap.portal.appintegrator.sap.bwc.Transaction iview. The transaction is being called in it's own popup window using a URL like this - http://<server>/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.bwc.Transaction?System=SAP&TCode=<TCODE>&GuiType=WinGui&OkCode=/00&ApplicationParameter=<Parameters>.
My question would be is it possible to close the whole browser window after the transaction is done, right now I can end the SAP session, but not close the Browser window.
Thanks,
Obadiah

Hi Obadiah,
After you launch a transaction iView all the communication is done between the back-end application and the browser, without any portal involvement. Therefor the is no way (from potal point of view) to tell when you quit the application.
However, in your case I would go for a simple work around - Start the application in SSF (SAP Shortcut File) mode. It will simply launch the transaction directly in you SAP GUI, without any browser. It's easily configureable in that iView's property editor, under "Content - Transaction" category -> see "SAP GUI type".
#read_more_about_it @ http://help.sap.com/saphelp_nw04s/helpdata/en/fe/13c43bb7137503e10000000a11402f/frameset.htm

Accessing windows explorer through portal

is it possible to access windows explorer through portal. or is there a way to access the files in the computer thro portal. i mean something similiar to windows explorer.
can we access windows explorer itself or we need build an application for this. can someone give me an idea on this. its urgent.
regds
Rajesh

Hi Sharmila,
a. Access through Windows Explorer. User should be able to do all required operations related to document handling through Windows Explorer (Check in, Check out, etc.). all these must be done thro portal.
b. Integration with MS Office and other popular softwares like Visio, MS Project, etc. User should be able to open, save, check-in, check- out document from within these applications. the corresponding file when clicked should open in ms office or word with all the tool boxes enabled.
c. allow the users to categorize the document repository to different categories.
d. should support versioning of the documents.
e. should have predefined user levels / category.
plzz look into this , say me which is possible and which is not possible. Thanks in advance
regds
Rajesh

Close portal main window without confirmation message

Hi All,
Is it possible to close the Portal Main Window (main page) without a confirmation popup window.
I am launching an iView (can be excel sheet/html page etc) using Quick Link which is attached to a role.
When this iView opens, I want to close the portal main page.
I am using the below code to close the main window.
window.top.close()
But it is prompting a confirmation popup window "Do you want to close this window". I don't want this popup message.
I have tried with below code also, but it is neither prompting nor closing the window.
window.opener=null;
window.close();
window.opener=self;
window.close();
Can anyone tell me how to acheive the above requirement.
Thanks
Chinna.

Hi Baby,
I am using IE6.
I am executing this code from my AbstractPortalComponent within the doContent method.
I have tested by replacing the browser URL with this script
javascript:window.top.open('','_self','');window.close();
It pops up the confirmation window.
Thanks
Chinna.

Change windows title in Portal 60

Hi.
When we navigate page in porta1, We have page title in browser title for example "Portal Support Desk - Enterprise Portal 6.0 - Microsoft Internet Explorer".
In above, "Portal Support Desk" is a page title and "Enterprise Portal 6.0" is a portal title.
So, I thihk portal has "Page Title - Portal Title" pattern.
Is there any way to change this pattern ?
Actually, We want to change this to "Portal Title - Page Title" .
Regards, Arnold.

Hi Arnold
do the following in portal
system administration -> system configuration ->under detailed configuration choose service configuration
under portal runtime -> central configuration double click to open it
find out following portal.html.head.title
change the value SAP Enterprise Portal 6.0 to ur value.
save ur changes. ( save button is below at end of page)
restart the J2EE server.
regards,
kaushal

Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

Migrate portal 306 (Windows NT) to portal 308 (Sun Solaris)

Similar Messages

Maybe you are looking for