Migrate presets from InDesign CS6 to CC

I know I was able to accomplish both actions when moving from CS5 to CS6. Sounds like the cloud version is built differently, so it looks like I'll be starting from scratch (which is no issue). Thanks for the replies...

Bob -
Thanks for the reply. I simply want to copy my custom workspaces and print pre-sets to the new PC. I understand that there is a way to sync the preferences, but the new version of InDesign will not be installed on the same PC. The new version is going to be installed on a difference PC all together.

Similar Messages

  • Too long export to PDF from Indesign CS6

    When I exporting PDF from InDesign CS6 takes too long. For example, a few minutes (5minutes). In InDesign CS3, which I used earlier, the file is exported immediately (few seconds). It is a problem in setting or higher hardware requirements?
    I use laptop 2GB dual processor, 8GB RAM, Windows Vista 32 bit. You have a similar experience?

    It is strange that CS6 supports Windows XP and Windows7 and Vista does not support. I use 8GB RAM because I bought a laptop so. There for me any solution, how to enable CS6 InDesign with the 32 bit system Windows Vista?

  • I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

    Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
    1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
    2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
    I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
    That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
    PLEASE HELP..
    P.S :
    I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

    Hi Akshay,
    If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
    This is how you can specify a page break:
    1. Select the image
    2. Goto Object->Object Export Options
    3. Select EPUB and HTML tab
    4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
    Regarding your question about images:
    You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
    Regards,
    Pooja

  • Cannot overwrite PDF when exporting to Acrobat from InDesign CS6

    When exporting to Acrobat Pro X from InDesign CS6, there are times when I want to overwrite an exising file but I get an error msg that the file is in use (it is not--this even happens when I have closed the file and quit Acrobat) or i don't have permission. In the Info panel at the Finder, i see that "myusername (ME)" does have permission to read and write this file. As a test, I also changed the permissions for Admin and Everyone to Read & Write, but that did not help. I've checked Preferences in both InDesign and Acrobat Pro anc can't find a relevant setting.
    To save the file with the same filename as the pre-exisitng PDF, I have to close the pre-exisitng PDF and move it to the trash.
    I have no problem overwriting a PDF document from Acrobat. This only happens when I am exporting from ID.
    I am on a Mac running the latest version of OSX.
    Any ideas?
    Thanks!
    Carol Gunn

    Make sure that the PDF you are trying to overwrite is not selected in your finder. I've found that if it's selected in the finder then the preview tricks Indesign into thinking the file is busy

  • Having trouble exporting to pdf from InDesign CS6

    When I attempt to export to pdf from InDesign CS6, the application crashes. Apparently there is some phantom plug-in issue.
    I need to get this resolved asap.
    Thank you,
    Marissa

    Have a look at this generic document to help you troubleshoot: http://helpx.adobe.com/indesign/kb/troubleshoot-printing-pdf-export-indesign.html
    Could you also provide details about what you've tried, and what errors you encountered? Is this problem limited to a particular document, or all documents?

  • Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?

    Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?
    When I export a PDF from InDesign CS6 with specific margins, Acrobat does not recognize the Art box. (I have PitStop Pro 11 for page box view)

    Thanks Steve,
    We are exporting PDF's as you indicate. I see the same thing. The boxes are all the size of the original InDesign document. The PDF art box should be predicated by the margins in InDesign. When we had CS3, this worked great. Now, it seems that there is a disconnect between the two Adobe products honoring the page box size. I have contacted the Adobe techs via chat, and they had no clue what I was referring to. I find it mystifying that Acrobat can not interpret the art box set in InDesign as margins.

  • Import custom Key Commands from InDesign CS6 to InDesign CC

    How can I import my custom Key Commands from InDesign CS6 to InDesign CC?

    [Moving the thread to the InDesign Forum]
    While the best practice is to recreate any customizations you made from previous versions to the new version to prevent any hiccups, you can certainly try copying the .indk file from the V8 (InDesign CS6) folder to the V9 (CC) folder.
    Launch InDesign CS6, Edit > Keyboard Shortcuts > create a new set with all your custom keyboard shortcuts
    Launch InDesign CC, Edit > Keyboard Shortcuts > create a new set with the same set name as existed in CS6 but make no modifications
    Locate and copy the [set name].indk file in version 8 and replace it in version 9
    Repeat the above step for any custom sets you made
    Here's the path to locate the .indk file
    Windows Vista and Windows 7 & 8
    Users\[username]\AppData\Roaming\Adobe\InDesign\[Version]\[Language]\InDesign Shortcut Sets
    Mac OS
    Users/[username]/Library/Preferences/Adobe InDesign/[version]/[language]/InDesign Shortcut Sets
    Please take a look here for more info: http://help.adobe.com/en_US/indesign/cs/using/WS668BC5E2-1E1A-4e75-A69A-44A787B4A5FAa.html #WS57E36B38-B2EB-4255-BAB5-19CCCB4319BFa
    Try it out and let us know if this helps. Thanks!

  • Restore PDF presets in InDesign CS6

    While using InDesign CS6, I went to export a pdf and found the presets were gone, same for Illustrator CS6.
    I have been able to find old presets on the forum but none that include X-4:2008.
    How can I restore all the presets?
    Thanks.

    https://www.hightail.com/download/bXBad0VCZ1B6NE9FTmNUQw should have most of them.

  • Photoshop CS6 - Pasting Smart Objects from InDesign CS6 look awful

    Since upgrading from CS5 I'm having a huge problem using Smart Objects.
    What:
    Smart Objects pasted from InDesign into Photoshop are pixelated and corny beyond belief. Originating material placed in InDesign is hi-res (e.g. 600ppi) but when pasted in PS it looks crappy.
    How:
    Selecting an image in InDesign and pasting it in PS in a 72ppi file.
    Typically I need to copy elements from previous art in ID and re-compose and use for web.
    Why:
    Can't seem to fix it. Have tried with Anti-Aliasing both on and off to no avail. None of the Image Interpolation settings affect this either.
    Only solution is to scale the placed Smart Object to something like 400% where it suddenly looks nice again, rasterize and then scale it back down.
    Theory:
    Smart Object scaling is flawed in PS CS6.
    Note: All scaled images in InDesign already look gritty and awful. Even with Display Performance: High Quality set (using default settings). Seems to me like CS6 scaling is b a d.
    Anyone else seeing this?
    Thanks
    Image 1: Smart Object rasterized at same size as placed. (ouch. awful.)
    Image 2: Smart Object Scaled to 400%, rasterized and then scaled back to original size (yum yum, like it used to be without up-rasterize-down-scaling)

    That does not resolve the anti-aliasing issue in CS6 - it still looks rather bad.
    The anti-aliasing sampling method applied to smart vector objects is just extremely bad looking. And it is not merely an issue in Photoshop: exporting artwork from Illustrator at web/screen resolution using the web export is absolutely abysmal looking (not other word applies here, unfortunately).
    I explain more about this issue here: http://forums.adobe.com/message/6002543#6002543
    The best option is to blow up the artwork, rasterize, and then scale down with bicubic or bicubic automatic, depending. But even then you will not achieve the same quality that can be attained with other tools that, for example, support catmul rom and mitchellnetravali for downsampling.
    Anyway, Adobe applications are very weak when it comes to proper downsampling and file size optimization for web and screen graphics. You're better off looking someplace else.

  • Problem with exporting PDF from Indesign CS6

    Hi,
    I recently registered & installed CS6 on my computer (Last week!), and I seem to have problems with Indesign, which is the main reason for my buying the product.
    The problem is that whenever I try to save & export a file as PDF from Indesign I get an error message (See attached file).
    The files are saved with 0KB size, and so the Acrobat reader can't open them for preview.
    This really interrupts my work, and backs up the entire comapny schedule.
    I already tried updating, and uninstalling&re-installing the suite - but no luck.
    Any help would be appreciated, and we need it ASAP.
    Thanks in advance,

    Without proper system info and details about what PDF settings you actually used and how and where you save your files, nobody can say anything. You could simply be doing something silly like using PDF/A, but trying to enforce high-res pictures or whatever. In any case, ask in the ID forum.
    Mylenium

  • Plz help how to do pdf slide show from Indesign CS6 CC application

    Hi, how to apply to PDF page slide shows, export from Adobe Indesign CS6 CC

    Thanks Adrian, it worked! 
    File>export> save as: IDML.
    This issue happened to me while exporting to PDF, too. but after saving as IDML, the elements were misplaced! i had to rework them. but at least i didnt loose everything. anybody got a better solution to that? note: always keep an IDML backup of your Indesign files.
    this forum is life savin!

  • Exporting to a .swf or .fla from InDesign CS6 - issues with timeline when opened in Flash.

    Hello,
    Looking for help with exporting files for Flash. I have tried both .swf and fla exports from InDesign for the animations I have created. The .swf file will play fine in Flash player but I am having no luck using the .swf or .fla file in Flash. The .fla file will open in Flash but there is no time-line. I can import the .swf file into Flash, but again there is no timeline - all the graphics and elements are visible in the library.
    - Is there a particular way the file(s) have to be exported from InDesign in order for them to appear with a time line in Flash?
    - Are there particular do's and dont's when it comes to creating InDesign files that are going to be used as Flash animation?
    Any thoughts or suggestions would be greatly appreciated.
    Cheers,
    Jamie

    The page turning animations in an exported swf are accomplished via ActionScript—they are not timeline based tween animations. You might be able to decompile the swf and get to the code, but I've never tried it. Google SWF decompiler.
    When you export to fla the animation ActionScript code is not included, so you lose the page turn animations. Each spread is saved as a MovieClip and the clips appear on sequential keyframes of the root timeline. With an fla it's up to you to write any animation code.

  • Trying to export to PDF from InDesign CS6 but nothing happens

    I'm in InDesign CS6 and when I export to PDF, nothing happens. I have other files with the same format and they are exporting fine. I tried putting all the content into a new document but it still doesn't work. Has anyone else had this issue?
    Thank you!
    Bridget

    Adobe Community: File Crashing on Output - printing/PDF/other

  • Bridge constantly vanishes from indesign cs6?

    Every other time it seems I try to launch Bridge (Indesign cs6) it will not open. I have installed the update and re-installed Bridge several times but no dice? Help please...thanks...over and out...ChuckR

    Try resetting the Bridge prefs using the same keyboard combo you'd use to rest ID. see http://forums.adobe.com/thread/526990

  • Data Export From InDesign CS6 to Excel Please Help

    Hi!
    I need to export text from a 416 page catalog into an excel document. The text is formatted with paragraph and character style sheets, but the text frames do not link together. Or is there a way to export the text from InDesign with the page number into a text file, then the text file into an Excel document. Thank you so much for your help!

    That is not possible. You're going from a "smart" layout application to a dumb one.
    I don't think you could even place it as a PDF file of the text into Word and have it work.

Maybe you are looking for

  • Can I use my account on a different computer?

    Can I use my account on a different computer?

  • Help Calendar Not Synching Mobileme

    Hi Anyone, I need help. I got over excited when the 3G came out and got one straight away, the 1st gen was smooth no probs, this one is lets just say different. Does anyone know where I can find a solid step by step tutorial on synchronising the Mobi

  • How do you filter search results?

    Hi, We have a search button on our website that does a sitewide search, and I was wondering how you get about making it so that the search results display in date order (most recent items first). At the moment it seems to display things at random, wi

  • Recordset - passing multiple parameters

    Hi, I am trying to create a search page that recieves two parameters passed through a query string. I am trying to get search results between two numeric values ie Minprice and Maxprice. The following code tested in DW CS3 just gererates no data, eve

  • How to change apple id used with messages

    I previously was linked to my moms apple id account and so all of our apple devices are linked. I recently created my own apple id to make our devices separate in apps like messages, iTunes, and iCloud. any help on how to make these completely separa