Migrate SDH 10 Giga from N5K to N7K failed

Hi,
I have 10 Giga sdh line I bought from my ISP.
The devices at the ISP side is ECI BG serias with card dtpr bti.
This line works perfectly between two N5K's.
I'm migrating the network to N7K.
When I connect the N7K's with this 10 Giga line, the ports are flapping all the time.
I tried to change the speed and duplex to 10000 full, on both sides, but the ports are still flapping.
What can cause the diffrence between thh N5K and the N7K?

Similar Messages

I can't migrate my data from my old pc to my new macbook pro

Hi,
I have been trying to migrate my data from my PC to my new mac but it always seems to fail.
At first, I would begin the migration assistant and then after a while the PC would just crash.
But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.
If anyone has any advice I would really appreciate it!!
PS I also have an Ethernet cable if that's of any use but I don't know how to use it.

I suggest you stop using the Migrastion Assistant. Simple fact is, as you have found out, that it does not work most of the time and when it fdoes actuall transfer data it doesn't do it very well.
Just network the 2 computer together over your LAN and copy and past the files you want to move to the Mac.
Otr use an External drive, formatted either FAT32 or exFAT (doinig the formatting on the Windows PC) and then copy to the external from the Win PC and then copy from the external to the Mac.
You'll be happier.

What are the steps to migrate j2ee project from version 1.4 to 1.6

Hi All,
What are the steps to migrate java project from version1.4 to 1.6 and weblogic 9 to 12c.
Currently my application(java version1.4) is running on weblogic 9, i want to migrate it to weblogic 12c, what are the major steps i have to follow.
Please anyone of you help me as soon as possible.
Thanks,
Yugandhar.G

Hi Jeet,
The following are the logs for exception.
<Dec 13, 2012 12:04:52 PM CST> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 0:0:0:0:0:0:0:1:52,370 during the configured idle timeout of 5 seconds.>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149251> <Operation Remove failed for application "tcs". Error: java.lang.NullPointerException
java.lang.NullPointerException
     at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
     at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
     at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
     at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
     at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
     at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
     Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:14 PM CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1355371555961" for task "1". Error is: "java.lang.ArrayIndexOutOfBoundsException: 8"
java.lang.ArrayIndexOutOfBoundsException: 8
     at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
     at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
     Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "tcs".>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
java.lang.ArrayIndexOutOfBoundsException: 8
     at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
     at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
     Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:17 PM CST> <Error> <Console> <BEA-240003> <Administration Console encountered the following error: weblogic.application.WrappedDeploymentException: 8
     at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
     at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.populateClassInfos(ClassfinderClassInfos.java:137)
     at weblogic.application.utils.annotation.ClassfinderClassInfos.<init>(ClassfinderClassInfos.java:28)
     at weblogic.application.utils.annotation.AnnotationMappingsImpl.loadAnnotatedClasses(AnnotationMappingsImpl.java:69)
     at weblogic.application.internal.ApplicationContextImpl.processAnnotationMappings(ApplicationContextImpl.java:985)
     at weblogic.application.internal.ApplicationContextImpl.getAnnotatedClasses(ApplicationContextImpl.java:1010)
     at weblogic.j2ee.managedbean.ManagedBeanModuleExtensionFactory.create(ManagedBeanModuleExtensionFactory.java:43)
     at weblogic.servlet.internal.WebAppModule.initModuleExtensions(WebAppModule.java:562)
     at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:271)
     at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:636)
     at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
     at weblogic.application.internal.ExtensibleModuleWrapper.init(ExtensibleModuleWrapper.java:74)
     at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:84)
     at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:312)
     at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:325)
     at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:378)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:706)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:237)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:61)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:158)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:96)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:229)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>

Related to migration of db from sql server to oracle 11 g

We're trying to migrate a Sql server managment studio database to Oracle 11g using SQL Developer 4.0. We can successfully connect to both Sql server managment studion 8.0 and Oracle 11g using the tool, as well as click through the Migration Wizard and start the migration.
This opens the Database Migration dialog box, which indicates the capture process starts normally. we get the following error:
ora :01440 : can not insert null into migrlog (id column) ,
\and then after some time , i get an error that migration failed
i am not getting the reason,I thing it may be due to reason that , I have table's column in my source db with more than 30 character.
If i am migrating one by one table . then it is not giving any error, and identifier name is getting shrink in 30 character. but i am not getting the view , stored procedure , indexes , and others
then what is the solution for that, somebody pls suggest any help?????????????

Pl do not post duplicates - related to migration of db from sql server to oracle 11 g
Continue the discussion in your original thread
The error message is explicitly clear
ora :01440 : can not insert null into migrlog (id column)
Your process is trying to insert a NULL value into the ID column, which presumably cannot be NULL

Error when migrating AP 2600 from Autonomous to Lightweight

Hello,
I am trying to migrating AP 2600 series that came with autonomous image 15.2 to lightweight using the Cisco Prime Infrastructure built-in migration template.
The AP successfully downloads the image from an external TFTP server but fails at updating the environment variables.
The logs show that the AP should download a text file from Cisco Prime but fails to do so:
START: Detailed logging started at -> 01.22.2014_14.01.52
INFO: TELNET to device 10.32.148.225 done.
INFO: Privilege level is equal to 15.
INFO: Setting vty line completed.
INFO: Dumped Environmental variables.
INFO: AP is supported for Upgrade process
INFO: IOS version is greater than or equal to 12.3(7)JA.
INFO: AP has MIC installed already.
INFO: Station role is root.
INFO: Station role is root.
INFO: DNS and Domain name configured.
INFO: Mac address of device is 88:5a:92:17:2b:09
INFO: Completed Dot11Radio0 shutting.
INFO: Device set up done and time configured on device.
INFO: Run-config dumped.
INFO: AP is DHCP configured.
INFO: Hostname gbknwa2225sr
INFO: Dumped Environmental variables.
INFO: Starts loading recovery image, takes time based on link speed.
INFO: Image Loading done.
INFO: Copying updated Env. variable file to WCS local tftp server 10.70.165.165
INFO: Copying the Env. variable file from tftp server to device.
Copying the Env vars to device failed.
ERROR: Device Response ::
copy tftp://10.70.165.165/Env_vars_10.32.148.225_01.22.2014_14.07.55.txt flash:/env_vars
Destination filename [env_vars]?
%Warning:There is a file already existing with this name
Do you want to over write? [confirm]
Accessing tftp://10.70.165.165/Env_vars_10.32.148.225_01.22.2014_14.07.55.txt...
%Error opening tftp://10.70.165.165/Env_vars_10.32.148.225_01.22.2014_14.07.55.txt (Timed out)
gbknwa2225sr#
gbknwa2225sr#_tune_
gbknwa2225sr#
INFO: Un-shut radio 1 done.
END: Migration Process Failure: Copying Env_Vars to device failed.
What can I do to solve that ?
Many thanks for your help,
David

Hi David,
I think 2600 AP not supported on Prime Infra for autonomous to Ligtweight migration.
PI 1.2, 1.3, 1.4 , 2.0
Only these APs are supported: Autonomous to Lightweight Migration Support
Cisco Aironet 1130 Access Point
Cisco Aironet 1200 Access Point
Cisco Aironet 1240 Access Point
Cisco Aironet 1310 Bridge
Cisco Aironet 1410 Bridge
Check this link:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.4/configuration/guide/ctrlcfg.html
Hope it helps.
Regards
Dont forget to rate helpful posts

Migrating SYSTEM tablespace from DMTS to LMTS in Oracle 9.2.0.7

Migrating SYSTEM tablespace from DMTS to LMTS in Oracle 9.2.0.7 using
brspace -f dbcreate
SAP version: 4.6C
Oracle: 9.2.0.7
OS: AIX 5.3
BRTools: 6.40(42)    /** 6.40(10) or (12) will be sufficient according to SAP ***/
IMPORTANT ***************************************
MUST DO:
1. Create a Full Backup of your system
2. Test your Restore and recovery of your backup.
3. Have a copy of all your tablespaces names on hand
4. Know your SYS and SYSTEM passwords
5. Run CheckDB in DB13 to ensure it is completed successfully with no warnings. This reduce the chance of hitting errors in the process
6. Ensure your UNDO tablespace is big enough
7. OSS 400241 Problems with ops$ or sapr3 connect to Oracle
NOTE: OSS 706625(Read this note)
The migration from a dictionary-managed SYSTEM tablespace to a locally-managed tablespace using the PL/SQL procedure DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_TO_LOCAL is not supported in the SAP environment.
In UNIX, logon as ora<sid>
run command: brspace -f dbcreate
This command will triggers a Menu. The are seven(7) steps to complete the whole process. Do them in sequence, from step 1 to step 7 faithfully. In Step 1, ensure that your settings of PSAPTEMP, PSAPUNDO etc details such as filenames are correct. The rest I leave it as default and they are fine. Do not change redo log group from 8 to 4 even if you only have 4 redo groups. If not, you might need to restore the system! If the seven steps are complete without errors(warnings is acceptable), congrats. Perform a backup again.
Problems I encountered that caused me to restore system:
1./ Problem: I changed the redo group from 8 to 4 and in the later stage after the tablespaces and files are dropped, the system prompted me that 4 is not acceptable! I can't go back then so a restore is performed.
Solution: Leave the default value 8 as it is
2./ I was using wireless network and the network breaks thus process breaks.
Solution: This process in user-interactive and requires you to input confirmation along the way so do it using LAN.
3./ In the process of dropping tablespace PSAP<SID>, I encountered:
BR0301E SQL error -604 at location BrTspDrop-2
ORA-00601: error occurred at recursive SQL level 1
ORA-01555: snapshot too old: rollback segment number 22 with name '_SYSSMU22$" too small
Solution: I have not fixed this yet but I think it is because my PSAPUNDO is too small(800M) so I will increase it to a bigger value e.g. 5GB
4. Problem: Unable to start sap after successfully migrated. OPS$user problem
Solution: logon as <sid>adm, run R3trans -x in a directory that <sid>adm has read/write permission. R3trans -x will creates a file call trans.log. Read the details and refer to OSS 400241
Result: I have successfully performed this on one(1) system and doing this on the another one currently but encounter Problem 3. Will update this further if there are more findings.
REFERENCE:
OSS 748434 New BRSPACE function "dbcreate" - recreate database
OSS 646681 Reorganizing tables with BRSPACE
OSS 541538 FAX: Reorganizations
Message was edited by:
        Annie Chan
Message was edited by:
        Annie Chan
Message was edited by:
        Annie Chan

The current one I am implementing is a development system. The database is less than 100GB. 800MB of PSAPUNDO is sufficient for our development usage.
Follow up on Problem 3:
I created another undo tablespace PSAPUNDO2(undodata.dbf) with size of 5GB. I switched undo tablespace to PSAPUNDO2 and placed PSAPUNDO(undo.data1) offline. With PSAPUNDO2 online and PSAPUNDO offline, I started brspace -f dbcreate and encountered the error below at Step 2 Export User tablespace:
BR0301E SQL error -376 at location BrStattabCreate-3
ORA-00376: file 17 cannot be read at this time
ORA-01110: data file 17: '/oracle/DVT/sapdata1/undo_1/undo.data1'
ORA-06512: at 'SYS.DBMS_STATS", line 5317
ORA-06512: at line 1
I aborted the process and verified that SAP is able to run with this settings. I started CheckDB in DB13 and it shows me these messages:
BR0301W SQL error -376 at location brc_dblog_open-5
ORA-00376: file 17 cannot be read at this time
ORA-01110: data file 17: '/oracle/DEV/sapdata1/undo_1/undo.data1'
BR0324W Insertion of database log header failed
I don't understand then. I have already switched the undo tablespace from PSAPUNDO to PSAPUNDO2. Why the message above still appears? Once I put PSAPUNDO online, CheckDB completes successfully without warning.
I did show parameter undo_tablespace and the result is PSAPUNDO2(5GB).
So exactly, what's going on? Can anyone advise?
===============================================
I have managed to clear the message in DB13 after dropping PSAPUNDO tablespace including contents and datafiles. This is mentioned is OSS note 600141 pg 8 as below:
Note: You cannot just set the old rollback-tablespace PSAPROLL to offline instead of deleting it properly. This results in ORA-00376 in connection with ORA-01110 error messages. PSAPROLL must remain ONLINE until it is deleted. (Oracle bug 3635653)
Message was edited by:
        Annie Chan

Migrating EBS R12 from Solaris 9 to Solaris 10

Hi
Did anyone tried migrating EBS R12 from Solaris 9 to Solaris 10?
Regards

Also check the following:
Note: 399895.1 - Database Startup On Solaris 10 Fails With Ora-27102 Out Of Memory Error
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=399895.1
Note: 169706.1 - Oracle Database on AIX,HP-UX,Linux,MacOSX,Solaris,Tru64 Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1

How to migrate a table from ORACLE 10g to 8i

have table named 'liuxg_tab_01' in 10g.
This morning I exported this table using 'exp' and then tried to imp it into 8i, I failed.
After a while, I created a database link named 'ctf' in 8i which connected to 10g. I issued 'create table test as selct * from liuxg_tab_01@ctf',it returns 'ORA-01723'.
Then I extraced the DDL of 'liuxg_tab_01' from 10g with QUEST TAOD, it's:
CREATE TABLE LIUXG_TAB_01
OWNER VARCHAR2(30 BYTE),
OBJECT_NAME VARCHAR2(30 BYTE),
SUBOBJECT_NAME VARCHAR2(30 BYTE),
OBJECT_ID NUMBER,
DATA_OBJECT_ID NUMBER,
OBJECT_TYPE VARCHAR2(19 BYTE),
CREATED DATE,
LAST_DDL_TIME DATE,
TIMESTAMP VARCHAR2(19 BYTE),
STATUS VARCHAR2(7 BYTE),
TEMPORARY VARCHAR2(1 BYTE),
GENERATED VARCHAR2(1 BYTE),
SECONDARY VARCHAR2(1 BYTE)
But I can not create a table using the upper DDL in 8i if I do not wipe off those "BYTES".
After creation of the table using the upper DDL without those 'BYTES', I sucessfully executed 'insert into LIUXG_TAB_01 select * from liuxg_tab_01@ctf'.
Anyone has a better method to move a table from ORACLE 10g to 8i?

1) The particular version of 8i and 10g in use here would be useful. I'm not sure that Oracle supports database links between any version of 8i and any version of 10g, though, so you're probably lucky that it worked as well as it did.
10g 10.1.0.3.0 and 8i 8.1.7.0.0
2) What version of the export utility did you use? You would need to use the 8i version to generate the dump file to have any chance of working, not the 10g verion.
I use the 'exp' provided with 10g 10.1.0.3.0 and 'imp' with 8i 8.1.7.0.0. I have tried to export data directly from 10g 10.1.0.3.0 using 'exp' provided with 8i 8.1.7.0.0. Failed.
3) Why? Since 8i is desupported, there isn't a lot of call for tools to move data from supported releases to unsupported releases.
We have an 8i DB which is still porivding insentive services. We just wanna migrate some tales from 10g to it.
FYI, NLS_LENGTH_SEMANTICS was introduced in 9i, so it's no suprise that 8i objected to the BYTE keyword in the DDL.
What's FYI :P
Another option would be to generate a CSV file of the data from 10g and use SQL*Loader to load it into 8i. Not sure this would be any easier, though.
Justin
Message was edited by:
user510846

Migrate Application Role from uat to prod in 11.1.1.6.10

Hi All,
We have to migrate the UAT Application Roles to Prod instance. I followed Rittman Mead policy store migration. servers in LINUX
http://www.rittmanmead.com/2011/04/oracle-bi-ee-11g-migrating-security-policy-store-part-2/
But at MigrateSecurityStore step, I am facing an issue with the wlst script which is throwing below error.
I am getting bellow error
wls:/offline> migrateSecurityStore(type="appPolicies",srcApp="obi",configFile="/ usr/app/MW/SecurityMigration/jps-config-policy.xml",src="sourceFileStore",dst="t                                                                                                         argetFileStore",overWrite="false")
Oct 17, 2013 11:41:27 AM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: org.xml.sax.SAXParseException: The XML declaration must end with "?>".
Command FAILED, Reason: The XML declaration must end with "?>".
Traceback (innermost last):
File "<console>", line 1, in ?
File "/usr/app/MW/oracle_common/common/wlst/jpsWlstCmd.py", line 955, in migrateSecurityStore
File "/usr/app/MW/oracle_common/common/wlst/jpsWlstCmd.py", line 927, in migrateSecurityStoreImpl
        at oracle.security.jps.internal.tools.utility.source.JpsInitializerSource.getSources(JpsInitializerSource.java:155)
        at oracle.security.jps.internal.tools.utility.JpsUtility.<init>(JpsUtilty.java:62)
        at oracle.security.jps.internal.tools.utility.JpsUtilMigrationPolicyImpl.migrateAppPolicyData(JpsUtilMigrationPolicyImpl.java:151)
        at oracle.security.jps.tools.utility.JpsUtilMigrationTool.executeCommand(JpsUtilMigrationTool.java:231)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
oracle.security.jps.JpsException: oracle.security.jps.JpsException: The XML declaration must end with "?>".
This is config.xml file
<?xml version='1.0' encoding='utf-8'? standalone='yes'?>
<jpsConfig xmlns="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd">
   <property name="oracle.security.jps.jaas.mode" value="Off"/>
   <propertySets>
<propertySet name="sam1.trusted.issuers.1">
<property name="name" value="www.oracle.com" />
</propertySet>
</propertySets>
   <serviceProviders>
      <serviceProvider type="POLICY_STORE" name="policystore.xml.provider" class="oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider">
         <description>XML-based PolicyStore Provider</description>
      </serviceProvider>
   </serviceProviders>
   <serviceInstance name="srcpolicystore.xml" provider="policystore.xml.provider" location="/usr/app/MW/SecurityMigration/uat/system-jazn-data.xml">
<description>File Based Policy Store Service Instance</description>
</serviceInstance>
<serviceInstance name="policystore.xml" provider="policystore.xml.provider" location="/usr/app/MW/SecurityMigration/prod/system-jazn-data.xml">
<description>File Based Policy Store Service Instance</description>
</serviceInstance>
   </serviceInstances>
    <jpsContexts default="default">

<jpsContext name="sourceFileStore">
<serviceInstanceRef ref="srcpolicystore.xml"/>
</jpsContext> <jpsContext name="targetFileStore">
<serviceInstanceRef ref="policystore.xml"/>
</jpsContext>
</jpsContexts>
</jpsConfig>
Please let me know if i need to provide further inputs.Appreciate your help.

make sure you are running the wlst.sh from this path /MWHOME/Oracle_BI1/common/bin/wlst.sh
you can take a look at this too Migrating Security Policies from Development to Standalone WLS 11g
http://ssssupport.blogspot.com/2013/02/obiee-11g-application-role-migration.html
Obiee11g: Migrating application role from DEV to Prod server in obiee11g

Migrating the CA from 2008 to 2012 PKI ?

Hi All,
I am using the HSM in my PKI environment and i performing the migration of CA from 2008 PKI to 2012 PKI. What i noticed is if the private key of CA is protected by OCS card then i don't see the CA certificate while running the Microsoft wizard at the
option of choose the existing certficate and private key but if i change the protection of private key to module or default protection then i am able to see the certificate and able to complete the migration.
So is there a way i can still do the migration of CA without changing the protection of private key from OCS to module or default protection ??
Puneet Singh

Hi Brian ,
I tried your solution but its not working please find the details below. Can you please let me know if i have missed anything while trying it .
Note : OCS card are PIN protected .
1) install the nCipher software. (Successfull)
2) Copy the %nfast_kmdata%\local folder and %nfast_kmdata%\config folders to the 2012 R2 server ( Sucessfull verified by
running enquiry and nfkminfo)
3) Import the CA certificate into the MY store (certutil -addstore my CA.crt) ( Successfull )
4) Re-attach the key (certutil -repairstore MY serialnumber)
( Sucessfull as i got the below output
C:\Program Files (x86)\nCipher\nfast\bin>certutil -repairstore MY "1d 37 f3 31 d
2 06 b5 9c 43 3a 59 d3 d8 a2 96 90"
MY "Personal"
================ Certificate 0 ================
Serial Number: 1d37f331d206b59c433a59d3d8a29690
Issuer: CN=ROOT-CA-SRC-CA
NotBefore: 2/7/2015 12:23 PM
NotAfter: 2/7/2020 12:29 PM
Subject: CN=ROOT-CA-SRC-CA
CA Version: V0.0
Signature matches Public Key
Root Certificate: Subject matches Issuer
Cert Hash(sha1): 5a b6 38 e9 fd bb e4 1c c8 a2 a0 94 b7 ba 45 c0 44 3a 5b 9a
Key Container = ROOT-CA-SRC-CA
Provider = nCipher Security World Key Storage Provider
Private key is NOT exportable
Signature test passed
CertUtil: -repairstore command completed successfully.
5)
Run the installation wizard using the existing key pair (will now be visible) ( Failed : I started the wizard and i didn't see the cert
Please
find the screen shot below
Puneet Singh

Trouble with migration assistant going from 10.5.8 to 10.6.1

Hi,
I have a macbook pro running 10.5.8 and just got a new macbook running 10.6.1. I'm trying to run the migration assistant. It gets to the point where it says 'preparing information' on each computer and then it seems to just hang. I've let it go for 45 minutes and nothing happens past that.
Any help would be appreciated!
Thanks,
Susan

I'm not sure what you are doing so try this:
On the old computer do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
With both computers turned off connect a Firewire cable between them. Boot the old computer into Target Disk Mode. After the TDM screen appears boot the new computer normally. After the new computer has started you should find a drive icon for your old computer on the new computer's Desktop.
Open Migration Assistant in the Utilities folder. Select the migration option (should be already selected) to migrate from another computer or hard drive. Then follow the onscreen instructions. For additional help select Migration Assistant Help from the Help menu.

Problems migrating a database from 10.2.0.4 to 11.2.0.1

Hello,
I'm migrating a database on a test machine. I've got the database on 10.2.0.4 and i've installed the 11.2.0.1 (Standard edition). The OS is windows server 2003 SP2
Using the migration assistant, after it does the analisis and shows the conclusions (before step 1), it throws a warning.
It sais that it can't update some components because it doesn't have proper actualization command files. These components are OLAP analytic workspace, OLAP catalog, Spatial and Oracle OLAP API.
I've tryed installing them from OUI, but it fails with an OUI-10150.
It can be that standard edition doesn't have that components? As long as I remember, I did a clean new installation of the 11.2 software, standard edition.
Thanks

Hi,
is your 10.2.0.4 version standard or enterprise?
I think you should install enterprise 11G R2 and then upgrade. because standard edition doesn't have all feature which are there in 10.2.0.4 so upgrade cannot happen.
Rajesh

Migrating to Z10 from blackberry bold 9900

What is a nice simple step by step procedure for migrating my data from a blackberry bold to a Z10. I have spent hours wasting time with device switch. I also downloaded some stupid ap that doesn t seem to do anything. really shows why blackberry has not be successful. Simple stuff like this really turns people off.

markyg wrote:
No surprise that there was no answer on this. I have never received from this forum any information that was any value what so ever.
1. Dude, lol, you waited what, all of 1 hour and 42 minutes for a responses before posting back your ingracious comments? In forums such as this, it is common courtesy to wait 24 hours before 'bumping' or even deciding to whine about the lack of input.
And, wow. As a fact, I know that you know this forum is a user-to-user support forum and that those who post here do NOT work for BlackBerry, but are users much as yourself (just with better attitudes and who don't see the need to belittle others from behind their computer screen).
2. You really didn't ask a question above, or at least you didn't complete any sentence with a routine "?" question mark which to most of the western world indicates you are asking a question. As a matter of fact, the BlackBerry Link Swtich Device works quite nicely, has for me and so many others. Failing sucess on that, I'd suggest making a backup with your Bold using the BlackBerry Desktop Software, and then using the 'restore' command in Link, once you have the Z10 connected.
Otherwise, you will need to express yourself more clearly and kindly, explaining what failed or what errors you encountered.
3. I for one resent your comment "I have never received from this forum any information that was any value what so ever." While you may not value any information you've received from this forum, that's your problem and yea, mostly just a pissy attitude problem. Reviewing your posts in this forum, you've been given lots of information by myself and other highly knowledgeable and helpful users. The fact that you don't value any of that says more about you than it does the information you've been offered or those users offering it to you.
Good luck. If you need help, be kind, ask and it shall be returned to you.
If you don't value any assistance offered here, call your mobile provider for official support.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can I migrate my photos from my iphone 6 to iphoto on my computer?

I read this on the Apple website:
Your photos and metadata from iPhoto will be migrated to Photos. Books, Journals and Slideshows will be converted to albums containing only photos. iPhoto for iOS is not supported on devices running iOS 8 or later.
I am especially troubled by the underlined statement. Can I migrate my photos from my iphone 6 to iphoto on my computer?

The key part of the Apple quote is …
Your photos and metadata from iPhoto will be migrated to Photos
Photos is the app in Yosemite that replaces iPhoto.
If iPhoto fails to work with iOS 8 try opening Image Capture on your Mac, that should at least allow you to import into a folder for dragging to iPhoto.
I don't have a device with iOS8 to test, so try iPhoto if you have it available - it may still work on Mavericks. iTunes may also still take photos from iPhoto & sync them to the device.

Can't migrate to SSD from windows 8.1

hello, recently i bought a laptop from HP, model nr: HP 15 notebook pc 15-r085no.the pc had winsows 8.1 installed. i bought a sandisk ultra II SSD on 120 GB,
i have tried to migrate from the pc's HDD to the SSD, with no luck.i used todo backup and paragon hard disk manager 15, the migration was complete every time, but when i insert the SSD into the laptop, the system gives me a messege like this: windows can't boot from the harddrive or please install os, (and i think the error code is 30f)i have tried everyting to make this work, with no luck:migration from HDD to SDD: Failed
installing windows 7 to the SSD: failed
getting information from sandisk SSD dasboard: failedwhat do i do?

Hi,
Is there any error message when you contact to eduroam failed? According to your said, the wireless device can contact WiFi with no problem, if so, it is probably not the WiFi adapter problem.
To identify the reason of this problem more effective, please provide as more as details about this problem.
Roger Lu
TechNet Community Support

Migrate SDH 10 Giga from N5K to N7K failed

Similar Messages

Maybe you are looking for