Migrate the MOSS application that having custom site defination to SP 2013.

Hi All,
I need to migrate a SharePoint 2007 application that uses the custom site definition in to SP 2013. I believe custom site definition is no more supported in SP 2013. Can anyone please suggest me what should be the approach for migration?
Regards Restless Spirit

Hi Restless,
According to your description, my understanding is that you want to migrate SharePoint 2007 application to SharePoint 2013.
You cannot upgrade directly from the server products in the Office 2007 release to SharePoint 2013. The changes between versions are too great, and the hardware requirements differ so much between versions that a direct upgrade is not possible or supported.
However, you can perform a series of database-attach upgrades to first upgrade your content to SharePoint 2010 Products and then to SharePoint 2013. More information, please refer to
it.
Or, you can use a third party to migrate SharePoint 2007 to SharePoint 2013.
Here are some similar posts for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/e9542ff4-7812-4e41-9a31-1fe8966c2988/moss-2007-to-sharepoint-2013-migration?forum=sharepointgeneral
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/da49e742-5e38-4b13-9dee-84b2bb4a5cef/migrating-custom-site-definitions-from-moss-2007-to-sharepoint-2010?forum=sharepointdevelopmentprevious
http://sharepointpromag.com/blog/migrating-sharepoint-2007-sharepoint-2013-part-1
http://sharepointpromag.com/blog/migrating-sharepoint-2007-sharepoint-2013-part-2
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

  • Disable Java Security Warning: Allow access to the following application from this web site?

    Dear all,
    When I open web intelligence with BI launchpad, this warning has been shown:
    "The web site is requesting access and control of the Java application shown above. Allow access only if you trust the web site and know that the application is intended to run on this site.
    Allow access to the following application from this web site?"
    and it has just three button of "Yes", "No" and "Help".
    I go to Java Control Panel and Security tab, then set security level on the "Medium" and add my site in the Exception Site List but this warning is shown each time I open web intelligence.
    I have searched the internet very much but I haven't found any solutions for disabling of it. How can I disable this security warning?
    Java version 7 update 67
    windows XP
    SAP BusinessObject BI Platform 4.1 Support Pack 4 Patch 2
    best regards,

    Hello,
    We have the same issue with BI4.1 SP3 FP3.
    Can anyone help us ?
    Nawale.

  • I am facing a caching problem in the Web-Application that I've developed us

    Dear Friends,
    I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet.
    Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch the data (using DAO layer) and will store in the session. After this the servlet will forward the request to the view JSP to present the data. The JSP access the object stored in the session and displays the data.
    However, when the link is clicked second time then the request is not received by our servlet and the cached(prev data) page is shown. If we refresh the page then request come to the servlet and we get correct data. But as you will also agree that we don't want the users to refresh the page again and again to get the updated data.
    We've included these lines in JSPs also but it does no good:
    <%
    response.setHeader("Expires", "0");
    response.setHeader("Cache-Control" ,"no-cache, must-revalidate");
    response.setHeader("Pragma", "no-cache");
    response.setHeader("Cache-Control","no-store");
    %>
    Request you to please give a solution for the same.
    Thanks & Regards,
    Mohan

    However, when the link is clicked second time then the request is not received by our servlet Impossible mate.. can you show your code. You sure there are no javascript errors ?
    Why dont you just remove your object from the session after displaying the data from it and see if your page "automatically" hits the servlet when the link is clicked.
    cheers..
    S

  • How do I get the weather application that is the same as the iphone application on my ipad mini?

    How do I get the weather application that is the same as the iphone application on my ipad mini?
    I don't want any other applications from the app store, I just want the regular weather app that comes with the iphones and other products.

    Apple hasn't made that particular App available for the iPad.

  • What is the name of the iPhone application that allows me to wirelessly print to my printer?

    What is the name of the iPhone application that will let me print to wirelessly to my printer?

    I have the same problem just bought a HP Photosmart Plus B210 with a Netgear wireless N Router, Wireless is working great with my Gateway laptop and the Ipad, and 2 iphones. The laptop prints tex and pic's wireless.
    I can e mail and print pic's from my i devices and all show wi-fi working great. But when I hit print to print a pic. nothing. If I get the answer I will let you know.

  • HT4623 I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime.  Every time I tried to sign in I get a message asking me to check my Network connection.  FaceTime and iMessage are the only application that give me this message.

    Try Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • How to migrate the Classic application to EPMA

    Hi
    Can any one tell me how to migrate the Classic application to EPMA HFM application .
    Rgds
    Rao..

    Hi,
    The path you have mentioned is where apex is installed rt?
    In the server where apex is installed there I have to search for the path u mentioned rt?
    Please make me clear.
    Thanks
    Alaka

  • How can i change the default application that Lion uses to open a document?

    how can i change the default application that Lion uses to open a document?

    Right-click on the document, select Get Info... In the lower half of the tall window that opens is a section labeled Open With (you may need to click on the disclosure triangle to see detail). Select from the pop-up list which app should open this document. If you want that to become the default condition, click on the Change All... button.

  • HT4082 When ios6 updated to my iPad I noticed the passbook application that downloaded to my phone did not make it on the iPad.  Why is this

    When ios6 updated to my iPad I noticed the passbook application that downloaded to my phone did not make it on the iPad.  Why is this

    It is not intended for the iPad. It would be somewhat cumbersome to have to use your iPad at a kiosk or a movie theater to print a boarding ticket.
    The app was designed to be used on the iPhone and the iPod Touch.

  • What is Site Definition and is there any OOTB Site Definition ?How to Create Custom Site Defination?

    Hi All,
    What is Site Definition and is there any OOTB Site Definition ?
    How to Create Custom Site Defination?
    Thanks in advance!

    Hello,
    Please check following links for detailed explanation : 
    http://msdn.microsoft.com/en-us/library/aa978512(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/ee231583.aspx
    Regards, Shruti

  • The desolate wasteland that is "customer care"

    Yet another day adrift in the ocean of despair, four weeks since I was sucked into the abyss that is BT. I should have heeded the warnig " ABANDON ALL HOPE YE WHO ENTER HERE" but I was foolish and agreed to a contract that has no hope of fulfilment.
    No Broadband ( a distant dream) and no phone! How the Jackals in the call center must laugh! " Here's another Fool " they cry, "tell him we'll call back, that's always a good'un!" better still they ten say that " it's with OpenReach" a mythical entity which can pronounce faults cured ( no they're not) without appearing to anyone!
    To really push me over the edge send me a bill for line rental on a line that has never worked.... oh, they have!

     Hi lffrobbo,
    The link at the bottom of Keith_Beddoe post is a signature which appears on all his posts on this forum.
    The link is for BT Customer's who need help, as it contains a vast amount of information and help that he and other community members contributed to.
    You can only access it from a BT Retail or BT Corporate Internet connection.
    The website which the link goes to is hosted by Keith_Beddoe himself and does not have any association with BTplc.
    I would take up NeilO's offer and follow his instructions in his post to contact the BTCare Team (Mods)
    Cheers
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Safari is the only application that can successfully use the internet.

    Dear all,
    I have been having internet problems for the past couple of weeks, that started fairly suddenly. The problem is that any of my internet-using applications cannot use the internet, apart from Safari. Browsing and downloading through Safari work seamlessly, but all other uses of the internet fail.
    For example, Messenger for Mac gives me a message indicating that I am not connected to the internet. Skype also does this, and the iTunes Store tells me that the host is down, and that I should check my internet connection and try again. Software Update is another application that cannot function as a result of this problem.
    I am living in student halls at university, so my internet connection is an ethernet cable plugged into the wall, and therefore I have no access to the behind-the-scenes things. I have contacted my internet provider (Ask4), to ask if they'd changed anything, but they said not, but are very willing to do anything they can to help me.
    It has been suggested to me that I simply create a new location in network settings, and that this would remedy the problem, but it didn't work.
    Another suggestion was to temporarily disable the firewall, but this also didn't help.
    Does anyone have any suggestions as to what I could try next, because I'm all out of ideas, and I can't find anyone with the same problem.
    Any help would be well-appreciated.
    Thanks
    Tom

    i figured it out. reboot the phone. its an ios4 bug that once you turn the orientation lock on once and back off, the photos wont rotate and you have to reboot. hopefully a fix comes soon

  • Unable to deploy the web application that uses a ejb3.0

    Hi,
    I have created a adf application with Model and a ViewController.
    Locally from jdeveloper I am able to run the application successfully by right clicking the web page and click on Run.
    However, when I try to deploy this application that contains both Model and ViewController, I am getting an error:
    [04:41:52 PM] Weblogic Server Exception: weblogic.application.ModuleException: Could not setup environment
    [04:41:52 PM] Caused by: weblogic.deployment.EnvironmentException: [J2EE:160167]The module QC-ViewController-context-root in application QC_application1 uses ejb-links but no EJB modules were found for this application.
    [04:41:52 PM] See server logs or server console for more details.
    [04:41:52 PM] weblogic.application.ModuleException: Could not setup environment
    [04:41:52 PM] #### Deployment incomplete. ####
    [04:41:52 PM] Remote deployment failed
    Any help on this issue is appreciated.
    Thanks
    Saikrishna

    Hi Saikrishna,
    I had the same problem. My fix was to create a new Deployment Profile (EJB JAR file) in my Model (the default is an "ADF Library JAR file") and have my ViewController depend on that.
    Also, make sure your ejb references in web.xml have the ejb-link attribute:
    <ejb-local-ref>
    <ejb-ref-name>AuditSessionEJB</ejb-ref-name>
    <ejb-ref-type>Session</ejb-ref-type>
    <local>com.incomemax.ejb.session.AuditSessionEJBLocal</local>
    <ejb-link>AuditSessionEJB</ejb-link> <---- this entry
    </ejb-local-ref>
    Hope that helps,
    Chris

  • When i plugged my iphone into itunes for the first time, it asked me if i wanted to sinc with my ipod that was already on itunes and i did. Now, it deleated all of the iphone applications that it came loaded with. How do i get these back?

    I clicked the button to sync with my ipod touch, because i thought it would give me all my picture and notes, which it did, but it also took away facetime and all the other software that the iphone 4s comes with. I also lost all my contacts. I dont care if i end up losing my pictures and notes, i just want my iphone back to the way it was when i bought it. I'm restoring it now, but it says its going to take 6 hours..I dont know if this is right or not.. help?

    It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
    If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it.

  • TS3276 How do you stop the mail application that freezes during typing of new email?

    When I open up the mail application and start a new email, the application will freeze as I type.  Nothing will appear on the screen as I type, then all the sudden, the application will "catch up."  This is NOT an intermitent problem; it happens each time I try to send a new email.

    From the menu bar, select
    Edit ▹ Substitutions
    and uncheck Text Replacement.

Maybe you are looking for