Migrate WCS 7.0.172 to Prime 1.3
Hi all,
I need to migrate from WCS to Prime in order to support WLC 7.4.
I'm a little bit confused about license migration procedure, I have read that it is necessary to move trought Prime1.2, so the license code that I need is:
R-W-PI12-M-K9
WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration
R-PI12-BASE-K9
Prime Infrastructure 1.2 Base License and Software
L-PI12-LF-1K-LIC
Prime Infrastructure 1.2 - Lifecycle - 1K Device Lic PAK
L-PILMS42-1K-M
Prime Infrastructure LMS 4.2 - 1K Device Upgrade Lic
L-W-PI12-1K-M
WCS to Prime Infrastructure 1.2 Migration 1K Device
How I can obtain .lic file for Prime from license present on my WCS installation?
The export from CLI procedure on WCS, export also the actual License?
Where is the procedure? I think there are some steps on the machine and others on the Cisco site
NOTE: I also change the position of the software from a virtual machine to another one
An additional request, in some document I read that it is possible to migrate directly to Prime1.3, is it true?
Thanks
Valerio
Has anyone seen an error message when trying to import WCS 7.0.230 maps into Prime Infrastructure 1.3.0.20?
WCS generated a .tar file, but when importing into Prime, it says:
XML Import: 'ImportExport_b8d18562d25d0f6f.tar' has an unsupported Mime Type. Mime Type sent by Browser: 'application/x-tar' Possible causes/workarounds: 1. Check File [Associations/Types/Extensions], 2. Ensure appropriate application launches file, 3. Try a different browser, 4. If File [Associations/Types/Extensions] are correct try closing the browser and relaunch. Supported file format mime types are 'application/gzip-compressed', 'multipart/gzip-compressed', 'multipart/x-zip-compressed', 'application/x-gzip-compressed', 'application/zip', 'multipart/zip', 'application/x-zip-compressed', 'multipart/x-gzip', 'application/x-zip', 'application/gzip', 'application/x-gzip', 'multipart/x-gzip-compressed', 'multipart/gzip', 'multipart/x-zip'
Similar Messages
-
WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade
Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
JelenaHello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl restoreDBTableMig.pl restoreJRMMig.pl restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
USER ID is ..................................... : sysadmin
OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
Generation to be restored is ................... : 0
Backup taken from............................... : /opt/BKP/
Common Services version in the backup data is... : 3.3.1
Common Services is installed in................. : /opt/CSCOpx
The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
WARNING: The list of applications installed on this CiscoWorks server does not match the list of
applications in the backup archive. If you restore data from this backup archive,it may
cause problems in the CiscoWorks applications.
Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
Available disk space in NMSROOT................. : 86451488 Kb
Required disk space in NMSROOT.................. : 35906524 Kb
(The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
Cross Platform Update started.
Cross Platform Update completed.
License check started.
WARNING: The license details in the server are different from the backup data.
After restoring, please check the license available in the server.
WARNING: Your current license count is lower than your earlier license count.
If you restore the data now, devices that exceed the current licence count
will be moved to Suspended state.
License check completed.
Restoring certificate.
WARNING: Cannot evaluate the hostname, hence the certificate
may be from this host or another host.
[ Certificate not overwritten ]
Restored Certificate.
Restoring Common Services database.
Restored Common Services database.
Restoring CMIC data.
Restored CMIC data.
Restoring CMC data.
Restored CMC data.
Restoring Security Settings.
Restored Security Settings.
Restoring DCR data.
Restored DCR data.
Restoring Certificate key store.
Restored Certificate key store.
Restoring DCNM CrossLaunch data.
Restored DCNM CrossLaunch function.
Restoring JAAS configuration.
Restored JAAS configuration.
JRM Job Migration started.
JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
10% of IPM Restore Completed
30% of IPM Restore Completed
50% of IPM Restore Completed
60% of IPM Restore Completed
70% of IPM Restore Completed
100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena -
Migrate from WCS 7.0.172.0 to Cisco Prime NCS
Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.
Yes, this is possible. Here is the link from the NCS release notes on the process.
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/release/notes/NCS_RN1.0.0.html#wp83675
Steve -
Migration WCS to Prime 2.2
Hi,
A Customer of mine has three instances of WCS he wants to upgrade to Prime 2.2.
Regarding the upgrade path there are several steps. If we have to follow this path three times
this takes at least three days of work.
I wonder if there is a way to rehost the WCS licenses to Prime 2.2.
Another question is, if the maps exported out of WCS contain the AP positions and if they
can be imported into Prime 2.2.
Regards,
UrsHi,tsgruu2000.
Sorry to say that you cannot rehost the WCS licences to Prime 2.2. You need to purchase new license for the Prime once you upgrade it. For further assistance kindly email me directly at ([email protected])
Happy to Serve!
Barry -
Import WCS 7.0.164.0 Database into WCS 7.0.172.0
We are experiencing some issues while upgrading from WCS 7.0.164 to 7.0.172. For some reason, everytime we try to import the 7.0.164 database, the 7.0.172 restore process aborts with:
Waiting for database to become idle
To Version 7.0.172.0
Invoking upgrade_general.sql
From Version 7.0.164.0
Updating Schema. This may take a while.
java.sql.SQLException: [Solid JDBC 04.50.0176] Data source rejected establishment of connection
Failed to export Hibernate schema
Hiblog.txt shows the following:
NFO 2011-07-05 10:55:03,143 [main] (TableMetadata.java:43) - indexes: [$$rrmauditdot11bconfig_primarykey_10795, rrmauditdot11bconfig_eventindex, fk254609e9ebca074c]
WARN 2011-07-05 10:55:03,175 [main] (JDBCExceptionReporter.java:77) - SQL Error: 25214, SQLState: 08003
ERROR 2011-07-05 10:55:03,175 [main] (JDBCExceptionReporter.java:78) - [Solid JDBC 04.50.0176] Connection not open
ERROR 2011-07-05 10:55:03,175 [main] (SchemaUpdate.java:165) - could not complete schema update
org.hibernate.exception.JDBCConnectionException: could not get table metadata: RrmConfig
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:74)
at com.cisco.server.persistence.hibernate.dialect.SolidDialect$2.convert(Unknown Source)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:29)
at org.hibernate.tool.hbm2ddl.DatabaseMetadata.getTableMetadata(DatabaseMetadata.java:105)
at org.hibernate.cfg.Configuration.generateSchemaUpdateScript(Configuration.java:948)
at org.hibernate.tool.hbm2ddl.SchemaUpdate.execute(SchemaUpdate.java:140)
at com.cisco.server.persistence.util.PersistenceUtil.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.DBAdmin.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.MigrateOldDbToNewDb.upgradeDatabase(Unknown Source)
at com.cisco.packaging.SelectDirAndRestoreDb.restoreDatabase(Unknown Source)
at com.cisco.packaging.DBAdmin.restoreDB(Unknown Source)
at com.cisco.packaging.DBAdmin.runMain(Unknown Source)
at com.cisco.packaging.DBAdmin.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA10*..)
at com.zerog.lax.LAX.main(DashoA10*..)
Caused by: java.sql.SQLException: [Solid JDBC 04.50.0176] Connection not open
at solid.jdbc.SolidError.s_Create(Unknown Source)
at solid.jdbc.SolidConnection.s_AddAndThrowError(Unknown Source)
at solid.jdbc.SolidConnection.s_Chk(Unknown Source)
at solid.jdbc.SolidResultSet.s_Chk(Unknown Source)
at solid.jdbc.SolidResultSet.close(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyResultSet.close(NewProxyResultSet.java:2999)
at org.hibernate.tool.hbm2ddl.DatabaseMetadata.getTableMetadata(DatabaseMetadata.java:101)
... 15 more
WARN 2011-07-05 10:55:03,175 [main] (NewProxyStatement.java:835) - Exception on close of inner statement.
java.sql.SQLException: [Solid JDBC 04.50.0176] Connection not open
at solid.jdbc.SolidError.s_Create(Unknown Source)
at solid.jdbc.SolidConnection.s_AddAndThrowError(Unknown Source)
at solid.jdbc.SolidConnection.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.close(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyStatement.close(NewProxyStatement.java:831)
at org.hibernate.tool.hbm2ddl.SchemaUpdate.execute(SchemaUpdate.java:171)
at com.cisco.server.persistence.util.PersistenceUtil.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.DBAdmin.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.MigrateOldDbToNewDb.upgradeDatabase(Unknown Source)
at com.cisco.packaging.SelectDirAndRestoreDb.restoreDatabase(Unknown Source)
at com.cisco.packaging.DBAdmin.restoreDB(Unknown Source)
at com.cisco.packaging.DBAdmin.runMain(Unknown Source)
at com.cisco.packaging.DBAdmin.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA10*..)
at com.zerog.lax.LAX.main(DashoA10*..)
WARN 2011-07-05 10:55:03,175 [main] (NewPooledConnection.java:425) - [c3p0] A PooledConnection that has already signalled a Connection error is still in use!
WARN 2011-07-05 10:55:03,175 [main] (NewPooledConnection.java:426) - [c3p0] Another error has occurred [ java.sql.SQLException: [Solid JDBC 04.50.0176] Connection not open ] which will not be reported to listeners!
java.sql.SQLException: [Solid JDBC 04.50.0176] Connection not open
at solid.jdbc.SolidError.s_Create(Unknown Source)
at solid.jdbc.SolidConnection.s_AddAndThrowError(Unknown Source)
at solid.jdbc.SolidConnection.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.close(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyStatement.close(NewProxyStatement.java:831)
at org.hibernate.tool.hbm2ddl.SchemaUpdate.execute(SchemaUpdate.java:171)
at com.cisco.server.persistence.util.PersistenceUtil.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.DBAdmin.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.MigrateOldDbToNewDb.upgradeDatabase(Unknown Source)
at com.cisco.packaging.SelectDirAndRestoreDb.restoreDatabase(Unknown Source)
at com.cisco.packaging.DBAdmin.restoreDB(Unknown Source)
at com.cisco.packaging.DBAdmin.runMain(Unknown Source)
at com.cisco.packaging.DBAdmin.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA10*..)
at com.zerog.lax.LAX.main(DashoA10*..)
ERROR 2011-07-05 10:55:03,175 [main] (SchemaUpdate.java:177) - Error closing connection
java.sql.SQLException: [Solid JDBC 04.50.0176] Connection not open
at solid.jdbc.SolidError.s_Create(Unknown Source)
at solid.jdbc.SolidConnection.s_AddAndThrowError(Unknown Source)
at solid.jdbc.SolidConnection.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.s_Chk(Unknown Source)
at solid.jdbc.SolidStatement.close(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyStatement.close(NewProxyStatement.java:831)
at org.hibernate.tool.hbm2ddl.SchemaUpdate.execute(SchemaUpdate.java:171)
at com.cisco.server.persistence.util.PersistenceUtil.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.DBAdmin.beginUpdateSchema(Unknown Source)
at com.cisco.packaging.MigrateOldDbToNewDb.upgradeDatabase(Unknown Source)
at com.cisco.packaging.SelectDirAndRestoreDb.restoreDatabase(Unknown Source)
at com.cisco.packaging.DBAdmin.restoreDB(Unknown Source)
at com.cisco.packaging.DBAdmin.runMain(Unknown Source)
at com.cisco.packaging.DBAdmin.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA10*..)
at com.zerog.lax.LAX.main(DashoA10*..)
WARN 2011-07-05 10:56:03,518 [com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#2] (BasicResourcePool.java:1841) - com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@ea58e3 -- Acquisition Attempt Failed!!! Clearing pending acquires. While trying to acquire a needed new resource, we failed to succeed more than the maximum number of allowed acquisition attempts (30). Last acquisition attempt exception:
java.sql.SQLException: [Solid JDBC 04.50.0176] Unable to connect to data source
at solid.jdbc.SolidConnection.s_AddAndThrowError(Unknown Source)
at solid.jdbc.SolidConnection.serverConnect(Unknown Source)
at solid.jdbc.SolidConnection.<init>(Unknown Source)
at solid.jdbc.SolidDriver.connect(Unknown Source)
at com.mchange.v2.c3p0.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:135)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:182)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:171)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool$1PooledConnectionResourcePoolManager.acquireResource(C3P0PooledConnectionPool.java:137)
at com.mchange.v2.resourcepool.BasicResourcePool.doAcquire(BasicResourcePool.java:1014)
at com.mchange.v2.resourcepool.BasicResourcePool.access$800(BasicResourcePool.java:32)
at com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask.run(BasicResourcePool.java:1810)
at com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread.run(ThreadPoolAsynchronousRunner.java:547)
OS is Windows Server 2003 Enterprise, 32bit, PAE Enabled
The strange thing is, we had a case open and the TAC-Engineer was actually able to import the database, since it looked like a issue with our virtual machine we agreed to close the case and continue testing on another server. However after moving to a proper server the problem still exists.
Also it doesnt matter if we try a direct upgrade install with automated migration or a fresh install with manual db import, its always the same error during the hibernate export.
I think i will reopen the case later but maybe there is a more simple solution to that problem?
Thanks a lot
Kind regards
ChristianHi Jorge,
It looks like such a level of granularity may not be achievable yet.
Should you need such a feature to be evaluated for potentially being included in future software releases, I would recommend to contact your local Cisco account team.
They should be able to follow up and submit a product enhancement request (PER).
Business units will evaluate PERs and, if feasible for the market, they may consider implementing such an enhancement in future versions of the SW/HW.
Regards,
Fede -
Unable to Migrate WCS Database to NCS with Demo License
I have NCS 1.1.0.58 running on a VM with a demo license, should I be able to migrate my WCS 7.0.230.0 database to NCS? I can not tell if the migration process worked and there are no objects in NCS. I have attached a console capture of the migration console messages.
Thanks in advance,
BobYou have probably thought of this already but, If the tables are the same in both sides why don't you just work out the population order and export directly from Access into the empty oracle tables using ODBC?
The way I do it is to create transition tables in oracle then have a script to load the tables and do some validation and error checking. -
Migrate WCS V 7.0.240 to NCS V 2.0.0.0.294
Hi everybody:
Some months ago , i had to upgrade our WLCs to the version 7.4.110, but the WCS doesn´t support these WLC ios version, then i decide to migrate to the NCS, i found some docs that explain that NCS v .20 supports these IOS WLC version, my question is, somebody know the procedure to migrate the WCS licenses to NCS
I exported the licenses to a new NCS but it didn´t accepted, show me and error that the file is not appear a license file.
I have a licenses files ( .lic) and the system show me an error that UDI of file does not match the system, i understand tha when you create license file, the name of the server is associated to the license.take a look at the below link for the license portion:
http://jenniferhuber.blogspot.com/2012/03/wcs-to-ncs-migration.html?showComment=1343851642987#c6457428309941635205
HTH,
Steve -
Hi,
I've been trying to migrate in my exported data from WCS to NCS as per the release notes but its not working for me.
We generated a licence from the UID and serial number for our VM install of NCS. I see mention of upgrade licenses do i need one of those?
Do I have to import the license separately from WCS. I thought that the export would include license + data.
I thought this would be straightforward but it doesn't seem that way. Is there anything that I'm leaving out or that i need to do to get this migration work.
Attached output from migration.
All help greatly appreciated.Hi Scott,
It was a licensing issue and we've finally resolved that. So i now have all our AP licenses imported into NCS.
I have run the migration again for the WCS data to be imported and it doesn't seems to have worked or is there something else i've to do. According to the release notes it just tells you to log in after the migration.
Any ideas?
Anthony
=================================
Forgot to get back to you on this one Scott. The license was the main issue afterwards I just had some problems with tftping the data from the WCS to NCS servers. Resolved that then.
Thanks.
Anthony -
WCS 7.0.172.0 Feedback Broken
I am trying to use the feedback tool from within WCS but when it opens the page, whatever Cisco product you choose it directs you to leave feedback for NCS.
Just thought i'd let Cisco know this is broken.I haven't been able to make it work like it was in prior versions. I have found you can initiate the session from monitor-->access points--->ap name and selecting the radio type. 802.11b/g/n, or 802.11a/n. The icon is under cleanair management operation.
-
Migrating from NCS 1.0 to Prime Infrastructure 1.2
Hi friends
I know i had short discussion about this before but here it comes again and this time in detail.
I have NCS 1.0 with 100 devices support license installed. Now knowing it has reached end of sale, and also for the fact that Prime does cover devices like routers, i went ahead to the upgrade path via PUT (Product Upgrade Tool).
Finally I received an email (OBA) advising my order is ready. This email included two items in the shipment,
L-N-PI12-100-M=
NCS 1.0 to Prime Infrastructure 1.2 Minor Upg 100 Device
L-PILMS42-100-M
Prime Infrastructure LMS 4.2 - 100 Device Upgrade Lic
When i click to the link in the same email to download the license, it only shows me one file which is
L-PILMS42-100-M
I tried using this file and installing on the NCS1.0 but it gives me error that this file is not a license file. The license name suggests me that it is not the license to be installed on the NCS. The file should be L-N-PI12-100-M=
Thanks for reading this all and would appreciate all your inputs here.
Regards,
MohitMarvin Rhoads wrote:Your PI 1.2 also includes the right to install and use LMS 4.2 - a separately installed and licensed server.If you want Assurance (or Compliance) licenses for PI, they will have to be ordered separately. The license files delivedred when you buy those product SKUs will allow you to use those features. The starting point (base) in PI 1.2 is Lifecycle.
when i followed the inpath upgrade, i receved an email from the licensing that the license file is ready for download. the order said,
Product Name : L-PILMS42-100-M
Product Description : L-PILMS42-100-M : Prime Infrastructure LMS 4.2 - 100 Device Upgrade Lic
and the attached lic file "LMS2013021XXXXXXX.lic" came along from them.
but when i installed that lic file, i got the error message from the upgarded the PI 1.2 that the file is not a license file.
The trouble is i cannot generate another lic file (if the exsting generated file was corrupt) cos the PAK is already been used once.
Now i am wondering i can avail that LMS file that would be good, but when i spoke to the TAC, i was told that this file name doesnt seem correct as this is PI and it wont understand LMS file. It was only useful if you were upgraing from LMS to PI and because my case was NCS to PI, this will not work.
Any suggestions? -
WCS 7.0.172.0 is stopped.
I rebooted the WCS server yesterday and now it is not working anymore.
Here is WCS Status :
Health Monitor is running with an error.
WCS is stopped.
Database server is running
Apache server is running
Logs from hm_launchout.txt
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
Key entry exists; Update Apache config from Keystore
Configuring Apache server for key
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting WCS Server
Could not create the Java virtual machine.
Unrecognized VM option ''
Failed to start WCS server. Check launchout.txt for details.
Log files are located under webnms\logs in the WCS install directory.
launchout.txt - it is empty
How can I proceed Now.
RegardsHere are collections of the Cisco WCS fails to start up.
Case 1: Apache server is not running.
Case 2: If the WCS were installed as a service, try to rebooted the machine.
Case 3: Check if the scripts are manually run from the bin directory. You must not manually run scripts from the bin directory. You must use the links from the Windows WCS programs menu or the scripts from Linux <Install Dir> (that is, /usr/local/bin/WCS22/StartWCSServer).
Case 4: Make sure the following ports are available to WCS.
*Checking for Port 1299 availability... OK
*Checking for Port 80 availability... OK
*Checking for Port 443 availability... OK
*Checking for Port 8009 availability... OK
*Checking for Port 8456 availability... OK
*Checking for Port 8457 availability... OK
*Checking for Port 8005 availability... OK
*Checking for UDP Port 69 availability... OK
*Checking for Port 21 availability... OK
Case 5: WCS does not start if the database is corrupt. If you reinitialize or restore the database, it fixes the issue. Navigate to the WCS installation directory and issue the dbadmin.bat reinitdb command from the command prompt to reinitialize the database.
case 6: Collect the log files from the <WCS Installation Dir>\webnms\logs. These log files can be used to identify the root cause of the issue.
Case 7: Check if the Windows SNMP trap service is active on the server. Disable the service because it uses Port 162 that is required by WCS. For more information on list of ports used by WCS, refer to the -
Copy AP Configuration Templates-WCS 7.0.172.0
I am wondering if anyone has seen a way to copy an AP configuration template. We have several distribution centers and the templates are essentially identical other than the Template name and the AP Group VLAN (different for each DC). We set up a new template for each new DC. Being able to copy a template, rename it and change the Group VLAN setting would save a lot of time.
I haven't been able to make it work like it was in prior versions. I have found you can initiate the session from monitor-->access points--->ap name and selecting the radio type. 802.11b/g/n, or 802.11a/n. The icon is under cleanair management operation.
-
WCS 7.0.172.0 gui timeout
Is there anyway to increase the timeout value for the gui?
I have an intern positioning AP's on various map's and he gets booted off the gui at random times. He isn't idle either.
ThanksI haven't been able to make it work like it was in prior versions. I have found you can initiate the session from monitor-->access points--->ap name and selecting the radio type. 802.11b/g/n, or 802.11a/n. The icon is under cleanair management operation.
-
Migrate from WCS 7.0 to Prime Infrastructure 1.2
Hi All,
I am looking for advice on the licensing and upgrade path for going from WCS 7.0 to PI 1.2.
At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.
I intend to use the Cisco Prime Upgrade Promotion
to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration)
and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the
Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will
my existing 200 licenses from the upgrade suffice.
Sorry if it's confusing, but I didn't invent the licensing structure just trying to make sense of it all.
TIAYou'll be able to manage up to 200 devices/APs simpy using the upgrade from WCS to PI 1.2 as you described it. No need to order another base license or 50 lifecycle licenses.
-
Hello Fellow Engineers,
I'm trying to migrate old data from WCS 7.0 to Prime 1.2 ... I have already created the zip file from WCS and imported it into the defaultRepo on Prime. I see it in the directory when I do a show repository defaultRepo so I have confirmed that it is there. My issue is that it appears Prime 1.2.1.012 won't accept the cli command of ncs migrate.
So, can someone let me know how I can proceed with the migration? I haven't been able to find any similar command in the Prime CLI so at this point I'm lost as to where I should go from here. I really don't want to have to tell the customer they have to downgrade to Prime 1.1 in order for them to perserve their maps especially since the Deployment Guide for Prime Infrastructure states that it is possible to migrate date from WCS 7.0 to Prime 1.2 as shown below ...
Data Migration
Data can be migrated from WCS 7.0, NCS 1.1, or LMS 4.x. More details on migrating data from each of these applications are spelled out in the following sections.
From WCS
You must upgrade the Cisco WCS server to one of the following releases before you attempt to perform the migration process to Cisco Prime Infrastructure 1.2:
• 7.0.164.3
• 7.0.172.0
• 7.0.220.0
This section provides instructions on how to migrate the WCS on either a Windows or Linux server to Cisco Prime Infrastructure.
Exporting Data from WCS
Export data from WCS 7.x through the CLI. The export userdata CLI command is available in WCS Release 7.x and later, which creates the ZIP file that contains the WCS data file. The CLI does not provide any option to customize what can be exported; all nonglobal user-defined items are exported. Complete these steps in order to export WCS data:
1. Stop the WCS server.
2. Run the export command through the script file and provide the path and export filename when prompted.
3. For Linux, run the export.sh all/data/wcs.zip command.
For Windows, run the export.bat all \data\wcs.zip command.
Importing Data into Cisco Prime Infrastructure
Complete the following steps to migrate data from WCS:
1. Place the WCS export ZIP file (for example, wcs.zip) in a repository or folder (for example, repositories).
2. Log in as the admin user and stop the Cisco Prime Infrastructure server by entering the ncs stop command. Configure the FTP repository on the Cisco Prime Infrastructure appliance using the repository command as shown in configuration snippet below:
pi-appliance/admin# configure
pi-appliance/admin(config)# repository pi-ftp-repo
pi-appliance/admin(config-Repository)# url ftp://209.165.200.227/backup
pi-appliance/admin(config-Repository)# user ftp-user password plain ftp-user
Note: Make sure the archived file is available with the show repository <repositoryname> command.
3. Enter the ncs migrate command in order to restore the WCS database.
pi-appliance/admin# ncs migrate wcs-data wcs.zip repository pi-ftp-repo
4. By default, no WCS events are migrated. Enter the ncs start command in order to start the Cisco Prime Infrastructure server after the upgrade is completed. Log in to the Cisco Prime Infrastructure user interface with the root login and the root password.
Any HELP on this would be greatly appreciated!!!
Thanks in advance!!!!Scott,
I don't have a FTP client ... I typically use TFTPd for any upgrades I have to do. I thought I could use this to transfer the patch and export.zip to NCS? However, when I tried to run the patch install it gives me this error ...
% Manifest file not found in the bundle
Can you tell me if you have experienced this before? Also if it's a problem with me using TFTPd can you recommend a FTP client application that I should use.
Thanks!
Maybe you are looking for
-
How can i remove videos from my download cue permanently?
I initially "purchased" the "Weight of the Nation" documentary series in HD, but once I realized how huge it was, I changed my nind and downloaded the SD version. But now every time iTunes checks for purchases to download, it starts downloading that
-
I take A LOT of pictures as I am an amerature photographer. I have used up almost all of the space on my internal hard drive with photos and music. Is there a way I can use my time capsul as an external hard drive? If so, can anyone direct me wher
-
Linking to a PDF (why won't it work on a Mac?)
Hi I'm sure this shouldn't be a problem but it is.. I've recently made a simple standalone SWF in a projector format. It contains a button which links to a PDF .. on (release) { getURL("cd/manual.pdf"); On PC this works fine (although it does open in
-
Creative G500 5.1 Questions **(Advice Needed)!**!
How are these speakers compared to the Logitech Z-5500 5.1 I've been looking into purchasing the Creative G500's, but i've always wanted to know how's the Sound Quality and Bass on these speakers? Are these speakers good for Hip-Hop/Rap music and als
-
Restful Data Serice - multiple parameters
Hello, I have some problems with RESTful web services and especially with finding tutorials or videos on this topic explaining more than simple one-parameter-get services. I have studied the simple one-parameter-get service explained i