Migrated from macbook Pro to latest macbook pro (10.9.5) - Error 16 and more
Migrated from macbook Pro to latest macbook pro (10.9.5) - Error 16 when starting up any CS6 app. Fixed permssions but problem persists. Re-installed apps, same issue PLUS cannot locate installations - only way to launch is from the end frame on the Installer? Search finds no evidence of any apps
Hi Stevel,
Refer to below document in-order to resolve Configuration error 16.
Configuration error 16 | CC, CS
Similar Messages
-
I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??
Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.
-
I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened. Make sure that all of your network devices are connected and turned on. It appears that some backups are already in use. If you don't see the backup you need, make sure it is not currently mounted by another machine and try again."
My HD failed and i installed a new one... I'm Trying to get everything back... Can anyone make a suggestion?Read the section E about restore issues.
http://pondini.org/TM/Troubleshooting.html
But you should be able to mount the sparsebundle and backup the major items if they are not damaged. You might also do a disk verify to see if the corruption can be repaired.
Have a look here also for restore of selected items.
http://pondini.org/TM/FAQ.html -
i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?
Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?
Hi
where can I find the "generic PCL driver" you referred to Greg?
Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
Find by product
Go
How do I find my product name / number?
5 matches found. Please select one below
HP LaserJet 2100 Printer series
HP LaserJet 2100 Printer
HP LaserJet 2100m Printer
HP LaserJet 2100se Printer
HP LaserJet 2100tn Printer
HP LaserJet 2100xi Printer -
Migrating from iMac G5 (Tiger) to Macbook Pro (Leopard) over a network
I just got my new Macbook (running Leopard) and trying to migrate all my files/settings from my iMac over (running Tiger). The instructions tell me to use Migration Assistant.
On new Mac, I open Migration Assistant and select migrate "From other Mac". I am doing this over network so a 6 digit code was provided. It then instructs me to power on my old Mac, ensure latest OS X software is updated (10.4.11), open Migration Assistant and select migrate "To another Mac".
Here's where I am stuck. On my old Mac, there is no "To another Mac" option to select.. thus I am not given a chance to input the 6 digit code to connect the 2 computers.
Is the problem to do with my old Mac being an older version, thus it's Migration Assistant application is also older and does not support a migrate "to another mac" option?Migration Assistant does not work well for migrating from a Power PC machine to an Intel Machine. Try this instead:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
Good luck! -
Migrating from Power Mac G5 to Mac Pro
Just ordered a new Mac Pro 2009 Nehalem Model, 2.66GHz, Quad Core, 640GB HD, 3GB Ram,
OSX 10.6 and it should arrive this week.
I am migrating from my old reliable Power Mac G5, Model 7,2, 400GB System HD, 750GB Scratch Disk HD, 5GB Ram, OSX 10.4.11. The major apps that I have been running are:
Final Cut Studio 1 (with Final Cut Pro 5.1.4)
Quick Time 7.6.4
ILife 08
IWork 08
ITunes 9.0.3
I would like to make the transition to the new Mac Pro as easy and painless as possible.
Can anyone offer the correct steps do a proper migration that will insure that my files
(especially the video files & address book entries) are saved and the new machine works as
it is designed to work?
ThanksConnect the two via Firewire cable and use Migration Assistant or see the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009 -
Trouble Migrating from iMac G4 to new MacBook
I recently purchased a new 13" 2.4 GHz MacBook, as well as a Firewire cable (a 6pin/6pin, but not from Apple), with the intention of transferring my data and some apps from my 5 year old iMac G4. I turned on the new MacBook and followed its instructions to migrate. I connected the Firewire cable, and restarted the old Mac while holding T, so the Firewire symbol appeared on the screen. However, then the migration assistant said I didn't have Mac OS X on the old computer, which is simply not true. Is the problem related to the fact that the new one is Intel-based and the old one is not, or that the old one has a different version (I think) of OS X?
Do not use Migration Assistant to migrate from a PPC Mac to an Intel Mac. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 3/12/2008 -
Migrating from G5 iMac to new Macbook
I have an assortment of issues that need answers but I'll be as brief as possible.
I have a new Macbook that I wanted to be able to install my iTunes library on. Part of my problem probably stems from my impatients because I didn't wait untill I had the proper cables to set up and migrate from my iMac G5 on the initial start up of the Macbook.
So I created a new user account on the Macbook and did all the updates. Since my iTunes library is on an external hard drive I thought I could just load it from there. It worked but none of my info (ratings, comments, dates, etc..) were there. The next day I picked up an ethernet to ethernet cable and decided to migrate the info using the migration assistant. It worked but then I had two user accounts for myself and a library in each, the one in the new user account was still lacking the track info.
It's not a small library and it was taking up more memory on my Macbook than I thought it should so deleted the library in the new user account, it fixed the memory issue but, the library in my old user account could no longer locate the files. I tried to start over from the begining with little success.
So here are my questions
1) How do I get back to square one on the Macbook?
2) Is it(digital rights management crap)that is causing me trouble or the fact that my files are on an external hard drive that is keeping me from successfully migrating the info?
3) All I really want is to be able to sync my iTunes library on the Macbook with my Imac iTunes library, the rest of the stuff from the user accounts on the iMac are fine staying where they are. How do I do this?
ThanksIf I do that will my library be accessable on the macbook without the external hard drive?
-
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is. -
ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005
Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.auHi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au -
I have migrated from Application server 10.1.3.1 to 10.1.3.5 by applying patches. After that i have tried to deploy a application, I got this error
Operation failed with error: [resonance:resonance] - Exception creating EntityManagerFactory using PersistenceProvider class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit
Please reply as soon as possible, It's very urgent , I am trying to resolve this issue for the past 1 weekThe Error which is present in the logs as follows
*10/05/12 16:05:18 Stop process*
*10/05/12 16:06:58 Start process*
May 12, 2010 4:07:04 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
May 12, 2010 4:07:05 PM com.evermind.server.XMLApplicationServerConfig randomize
JtaAdminPassword
INFO: Updating JtaAdmin account
*10/05/12 16:07:17 Oracle Containers for J2EE 10g (10.1.3.5.0) initialized*
May 12, 2010 4:10:28 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
*10/05/12 16:10:41 WARNING: Code-source /home/oracle/product/j2ee/resonance/appli*
cations/resonance/resonance/WEB-INF/lib/toplink.jar (from WEB-INF/lib/ directory
in /home/oracle/product/j2ee/resonance/applications/resonance/resonance/WEB-INF
*/lib) has the same filename but is not identical to /home/oracle/product/toplink*
*/jlib/toplink.jar (from <code-source> (ignore manifest Class-Path) in META-INF/b*
oot.xml in /home/oracle/product/j2ee/home/oc4j.jar). If it contains different ve
rsions of the same classes, it will be masked as the latter is already visible i
n the search path of loader resonance.web.resonance:0.0.0.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
*10/05/12 16:10:59 oracle.oc4j.admin.internal.DeployerException: [resonance:reson*
ance] - Exception creating EntityManagerFactory using PersistenceProvider class
oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence
unit ResonanceUnit.
*10/05/12 16:10:59 at com.evermind.server.ejb.exception.DeploymentException*
*.exceptionCreatingEntityManagerFactory(DeploymentException.java:130)*
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitMa*
nagerImpl.createContainerEntityManagerFactory(PersistenceUnitManagerImpl.java:19
*7)*
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitMa*
nagerImpl.initializePersistenceUnit(PersistenceUnitManagerImpl.java:159)
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitManagerImpl.initialize(PersistenceUnitManagerIm*
pl.java:87)
*10/05/12 16:10:59 at com.evermind.server.http.HttpApplication.createDefaultPersistenceUnitManager(HttpApplication.java:*
*875)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:844)*
*10/05/12 16:10:59 at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:435)*
*10/05/12 16:10:59 at com.evermind.server.Application.getHttpApplication(Application.java:592)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReferen*
ce(HttpSite.java:2280)
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:2199)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1833)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:304)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:120)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:92)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:825)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:276)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:100)*
*10/05/12 16:10:59 at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52*
*10/05/12 16:10:59 at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)*
*10/05/12 16:10:59 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.j*
ava:298)
*10/05/12 16:10:59 at java.lang.Thread.run(Thread.java:595)*
*10/05/12 16:11:00 WARNING: DeployerRunnable.run [resonance:resonance] - Exception creating EntityManagerFactory using Persist*
enceProvider class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit ResonanceUnit.oracle.
*oc4j.admin.internal.DeployerException: [resonance:resonance] - Exception creating EntityManagerFactory using PersistenceProvi*
der class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit ResonanceUnit.
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:133)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)
Help me -
hi i need help my iphone 4 asked me to update from ios 5.1.1. to ios 6 so i did and once it fineshd it sed error now all mi phone will do is turn on but onle showing the apple logo on it what do i do i need it working as i am paying for it on contract pls some one help me.
Also when i plug it into my computer it will not recognise that there is even a device, almost like there is no software? can anyone help me, thanks..You are going to have to connect to the computer and restore. http://support.apple.com/kb/HT1808
-
my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.
I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan. -
The latest update has caused a runtime error and cannot use i tunes
i have just tried to put the latest update on my laptop and it has caused a runtime error and now cannot install i tunes at all.
have you use latest version of nvidia driver, you have a compatibility issue here.
Maybe you are looking for
-
I am trying to make my fiels viewable to someone who has Adobe CC version 9.2, but I have version 10.0. Does anyone know how to save my files so the are readable?
-
How to power off 5th Gen ipod nano
I've only used a 4th gen nano a couple of times and holding the play/pause button would turn off the nano. I've just bought a 5th gen nano for somebody but holding the play/pause button only turns off the screen - hitting any other button brings it b
-
Alerts not retrieving the correct number of records
Hi, I have created alerts to run plans. These plans are getting records from DB and populating the ADC. The alerts are getting executed but are not retrieving the correct number of records. I have created 5 alerts to run 5 plans all in the same time.
-
SSL Load Balancing (Java applets problem)
Hi, I have implemented loadbalancing of two webservers using CSS 11503. Servers are containing SSL pages which need to be loadbalanced. I have tried configuring the content rule for ssl using port 443 application ssl advanced-balance ssl commands.The
-
Adobe PhotoDeluxe 4.0 and Windows 8
I have a new computer on Windows 8 and have Adobe PhotoDeluxe 4.0. How can I make this compatible?