Migrated to systemd, modules are not loading [solved]
Hi;
I got around to migrating to systemd, but now modules are not loading. I got this setup (i gave full permissions thought it would help):
$ ls /etc/modules-load.d/
-rwxrwxrwx 1 root root 20 Dec 2 22:34 vbox*
$ cat /etc/modules-load.d/vbox
#vbox
vboxdrv
loop
Any methods of debugging why this doesnt work?
Thanks.
Last edited by daf666 (2012-12-03 21:01:26)
the files have to end with ".conf". And -x permissions are certainly not necessary.
man modules-load.d
Similar Messages
-
[SOLVED] Many modules are not loaded in the Arch USB key installation.
Hello!
I installed Arch Linux on my USB key. I did it few months ago and it worked, I had portable arch.
Yesterday I decided to make a fresh installation. Unfortunately after booting it from my USB key
most of the modules were not loaded. Because of that I couldn't start the X server and connect to
the internet (ethernet card was not detected).
Even after loading the module which corresponds to my ethernet card manually (modprobe e1000e) it was not
displayed in the lsmod list.
I though "maybe I screwed something up during the installation?". To find out I used GParted to copy
my OS partition (perfectly working Arch Linux installed on the hard drive) to the USB key. Of course I changed the UUID of the USB partition.
After booting it I was suprised because the situation did not change - modules that are loaded on my main system for some
reason were not loaded on it's exact copy placed on the USB key.
I have no idea why my portable OS is acting like this.
Commands below were executed on another PC so don't look for the e1000e module.
$ lsmod
Module Size Used by
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
usb_storage 48007 2
ata_generic 3378 0
pata_acpi 3395 0
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
pata_atiixp 4819 0
ehci_pci 4000 0
ohci_pci 4040 0
ohci_hcd 23905 1 ohci_pci
ehci_hcd 59252 1 ehci_pci
usbcore 180104 6 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
ahci 23056 0
libahci 21642 1 ahci
usb_common 1656 1 usbcore
libata 171112 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 130669 4 usb_storage,libata,sd_mod,sr_mod
nouveau 904702 0
button 4677 1 nouveau
video 11196 1 nouveau
mxm_wmi 1475 1 nouveau
wmi 8419 2 mxm_wmi,nouveau
i2c_algo_bit 5399 1 nouveau
drm_kms_helper 36254 1 nouveau
ttm 63507 1 nouveau
drm 238238 3 ttm,drm_kms_helper,nouveau
i2c_core 24164 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
$ lspci #Just a fragment
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at de00 [size=256]
Memory at fdaff000 (64-bit, prefetchable) [size=4K]
Memory at fdaf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 07-00-00-00-68-4c-e0-00
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ cat /var/log/Xorg.0.log
[ 59.424]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 59.424] X Protocol Version 11, Revision 0
[ 59.424] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 59.424] Current Operating System: Linux sanguine 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[ 59.425] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2c39c1f9-de3e-4907-93dc-8b77422a07a1 rw
[ 59.425] Build Date: 09 January 2014 08:47:24AM
[ 59.425]
[ 59.425] Current version of pixman: 0.32.4
[ 59.425] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.425] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.425] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 12:55:56 2014
[ 59.433] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.437] (==) ServerLayout "Layout0"
[ 59.437] (**) |-->Screen "Screen0" (0)
[ 59.437] (**) | |-->Monitor "Monitor0"
[ 59.441] (**) | |-->Device "Device0"
[ 59.441] (**) |-->Input Device "Keyboard0"
[ 59.441] (**) |-->Input Device "Mouse0"
[ 59.441] (==) Automatically adding devices
[ 59.441] (==) Automatically enabling devices
[ 59.441] (==) Automatically adding GPU devices
[ 59.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.456] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 59.457] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 59.457] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.457] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 59.457] (WW) Disabling Keyboard0
[ 59.457] (WW) Disabling Mouse0
[ 59.457] (II) Loader magic: 0x804c80
[ 59.457] (II) Module ABI versions:
[ 59.457] X.Org ANSI C Emulation: 0.4
[ 59.457] X.Org Video Driver: 15.0
[ 59.457] X.Org XInput driver : 20.0
[ 59.457] X.Org Server Extension : 8.0
[ 59.459] (--) PCI:*(0:1:5:0) 1002:796e:1458:d000 rev 0, Mem @ 0xd8000000/134217728, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
[ 59.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.460] Initializing built-in extension Generic Event Extension
[ 59.460] Initializing built-in extension SHAPE
[ 59.460] Initializing built-in extension MIT-SHM
[ 59.460] Initializing built-in extension XInputExtension
[ 59.461] Initializing built-in extension XTEST
[ 59.461] Initializing built-in extension BIG-REQUESTS
[ 59.461] Initializing built-in extension SYNC
[ 59.461] Initializing built-in extension XKEYBOARD
[ 59.461] Initializing built-in extension XC-MISC
[ 59.461] Initializing built-in extension SECURITY
[ 59.461] Initializing built-in extension XINERAMA
[ 59.461] Initializing built-in extension XFIXES
[ 59.461] Initializing built-in extension RENDER
[ 59.461] Initializing built-in extension RANDR
[ 59.463] Initializing built-in extension COMPOSITE
[ 59.466] Initializing built-in extension DAMAGE
[ 59.468] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.470] Initializing built-in extension DOUBLE-BUFFER
[ 59.472] Initializing built-in extension RECORD
[ 59.475] Initializing built-in extension DPMS
[ 59.477] Initializing built-in extension Present
[ 59.479] Initializing built-in extension DRI3
[ 59.481] Initializing built-in extension X-Resource
[ 59.483] Initializing built-in extension XVideo
[ 59.485] Initializing built-in extension XVideo-MotionCompensation
[ 59.487] Initializing built-in extension XFree86-VidModeExtension
[ 59.490] Initializing built-in extension XFree86-DGA
[ 59.492] Initializing built-in extension XFree86-DRI
[ 59.494] Initializing built-in extension DRI2
[ 59.494] (II) LoadModule: "glx"
[ 59.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 60.382] (II) Module glx: vendor="NVIDIA Corporation"
[ 60.388] compiled for 4.0.2, module version = 1.0.0
[ 60.388] Module class: X.Org Server Extension
[ 60.388] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 60.401] Loading extension GLX
[ 60.401] (II) LoadModule: "nvidia"
[ 60.401] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 60.455] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 60.455] compiled for 4.0.2, module version = 1.0.0
[ 60.455] Module class: X.Org Video Driver
[ 60.462] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 60.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 60.464] (++) using VT number 1
[ 60.464] (EE) No devices detected.
[ 60.464] (EE)
Fatal server error:
[ 60.464] (EE) no screens found(EE)
[ 60.464] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60.464] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 60.465] (EE)
Last edited by Skitter (2014-02-16 20:57:21)Please post the output of:
dmesg -c
modprobe e1000e
dmesg -
Internet Problems: Websites are not loaded
Hi everyone,
since the Mavericks-Update I got some problems with my Internet-Connection:
1. Often the websites are not loaded. There comes no error-page or something else, its just a white page and I can see the Browser is loading but nothing happens. After refreshing the page, the page often loads correctly.
2. Connection to messengers in the browser get lost. I open Facebook or Google and often the connection to the chatsystem gets lost after a few seconds/minutes.
The problem comes up with any Internet-Conection(WiFi and Ethernet) and on every browser (Safari, Chrome, Firefox) in every network.
ping of google.com -> lost no packages! -> Internetconnection is stabile.
Other Notebooks are running without problems in the same network. Who can help?Hello,
I think I solved the problem:
Try this:
1. SystemProperties-> iCloud-> disable documents
2. Open Finder -> "Gehe zu" (go to) -> press alt -> Library -> Search Cache -> Take the Cache and drop to Desktop.
3. Restart your Mac -> During the start press cmd+alt+p+r and hold it down. Now the startsound appears 3 times. After three times you can stop pressing the keys. -> Mac starts -> Problem should be solved.
If you are shure the problem is solved, you can delete the Cache frome the Desktop. -
Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.
-
Classes are not loading from WEB-INF/classes directory
Hi All,
I am in a deep troble because the class files in the WEB-INF/classes directory are not loading.
I have deployed the application in Tomcat 6 server. And stored all class files under WEB-INF/classes dirctory. But when I execute a JSP page, I am getting following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
JSP FileName:/hello.jsp
An error occurred at line: 1 in the jsp file: /hello.jsp
com.flt.Test cannot be resolved to a type
1: <%=new com.flt.Test().hello()%>
Stacktrace:
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:98)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)The classes are available in the WEB-INF/classes directory and the folder name and package name of the classes are correct. I have also tried to execute the application by creating a jar file and put it in the WEB-INF/lib directory. But I am getting same result.
Is it the problem with Tomcat configuration? When I gone through Tomcat documentation, I get to know that the WebAppX class loader in Tomcat, loads application specific classes for a web application. Is it possible to start/stop WebAppx classloader manually?
Please help me to solve this issue.
Many Thanks,
Francis Lukose
Edited by: francis_ on May 13, 2008 10:03 AMThanks for your reply, Soultech2012.
<%=new com.flt.Test().hello()%>is the only code in the JSP page. Just a single line. Nothing more than that.
The code in Test.java is as follows:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.flt;
* @author Francis Lukose
public class Test {
public static String hello() {
return "hello";
}Many Thanks,
Francis
Edited by: francis_ on May 13, 2008 6:45 PM -
Sd card module/driver not loaded anymore
Hi,
since a recent update (linux 3.16 maybe ? ) the sd card module is not loaded anymore.
I have to load it manually :
modprobe -v rtsx_usb
(or add a module load in /etc/modules-load.d/)
My guess is that the "block" hook is not finding it anymore...
Any idea why ?
# uname -a
Linux azerty 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64 GNU/Linux
# /etc/mkinitcpio.conf :
HOOKS="base udev autodetect modconf keymap block lvm2 encrypt filesystems keyboard fsck"
sdcard NOT working:
# lsmod | egrep 'mmc|sdhci|sd'
sd_mod 44356 5
crc_t10dif 12431 1 sd_mod
scsi_mod 142915 2 libata,sd_mod
sdcard working:
#lsmod | egrep 'mmc|sdhci|sd'
rtsx_usb_sdmmc 25280 0
mmc_core 110475 1 rtsx_usb_sdmmc
rtsx_usb 17487 2 rtsx_usb_sdmmc,rtsx_usb_ms
led_class 12859 3 rtsx_usb_sdmmc,iwldvm,asus_wmi
sd_mod 44356 5
crc_t10dif 12431 1 sd_mod
scsi_mod 142915 2 libata,sd_modWell, in fact it's a bit weirder...
I'm loading the rtsx_usb module at boot.
Then I plug my sd card :
Sep 05 13:51:24 azerty kernel: mmc0: new ultra high speed SDR50 SDHC card at address aaaa
Sep 05 13:51:24 azerty kernel: mmcblk0: mmc0:aaaa SU16G 14.8 GiB
Sep 05 13:51:24 azerty kernel: mmcblk0: p1
It's not mounting... 10 seconds later :
Sep 05 13:51:34 azerty kernel: ehci-pci 0000:00:1a.0: dev 1.4 ep2in scatterlist error -104/-110
Later on:
Sep 05 13:51:54 azerty systemd-udevd[229]: worker [3393] /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/rtsx_usb_sdmmc.3/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p1 timeout; kill it
Sep 05 13:51:54 azerty systemd-udevd[229]: seq 2164 '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/rtsx_usb_sdmmc.3/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p1' killed
Sep 05 13:51:55 azerty systemd-udevd[229]: worker [3393] terminated by signal 9 (Killed)
Still not mounted obviously.
Now, I add another module :
# modprobe -v sdhci
insmod /lib/modules/3.16.1-1-ARCH/kernel/drivers/mmc/host/sdhci.ko.gz
Sep 05 13:53:38 azerty kernel: sdhci: Secure Digital Host Controller Interface driver
Sep 05 13:53:38 azerty kernel: sdhci: Copyright(c) Pierre Ossman
I remove the card and insert it again:
Sep 05 13:53:51 azerty kernel: mmc0: card aaaa removed
Sep 05 13:53:57 azerty kernel: mmc0: new ultra high speed SDR50 SDHC card at address aaaa
Sep 05 13:53:57 azerty kernel: mmcblk0: mmc0:aaaa SU16G 14.8 GiB
Sep 05 13:53:57 azerty kernel: mmcblk0: p1
Sep 05 13:53:57 azerty org.gtk.Private.UDisks2VolumeMonitor[1554]: libbluray/bdnav/index_parse.c:162: indx_parse(): error opening /run/media/olivarch/6663-3733/BDMV/index.bdmv
Sep 05 13:53:57 azerty org.gtk.Private.UDisks2VolumeMonitor[1554]: libbluray/bdnav/index_parse.c:162: indx_parse(): error opening /run/media/olivarch/6663-3733/BDMV/BACKUP/index.bdmv
Sep 05 13:53:57 azerty kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Sep 05 13:53:57 azerty udisksd[1409]: Mounted /dev/mmcblk0p1 at /run/media/olivarch/6663-3733 on behalf of uid 1000
Now it's working...
I tried to load both rtsx_usb and sdhci at boot but it doesn't work, it seems that I need to do it manually...
Weird. -
Gnome - Modules Do Not Load!
Hello,
Just got Arch up and going, and using GDM. Problem -- Most of Gnome's modules do not load! The menu, time, system monitor, and sound work... but BIG ones like desktop switcher, window manager, window list, and so on... do not load! These are important! Anyone else experienceing this, or can help me?
Also, how do I use pacman not in root (while logged into GDM)?Make sure that libxres package is installed
pacman -S libxres
for your second questions, if u are asking about switching to root from user, i.e using su, your user must be within the wheel group, under root do
gpasswd -a username wheel
u can also use sudo,
pacman -S sudo
edit /etc/sudoers and either uncomment the %wheel ALL = (ALL) ALL (Your user must be member of the wheel group), or add at the end of the file, username ALL = (ALL) ALL
hope that helps -
Keyfigure with units are not loading into transactional DSO in APD
Hi,
I am loading data from a Query to transactional DSO through APD. I have formula and new selection keyfigures in my query.
I mapped these keyfigures with units to the DSO. But i didnot see data for these keyfigures and also the units are not loaded.
I can see the values and units displayed in my query ?
What may be the reason for this issue even though every mapping is correct?
Please help me on this issue.Hello Dear
When you are getting blank date , your update rule processes its value as 00000000,
Now in the date conversion routine if you go , you will find that after the routine one exception is written for this value..means this value is not accepted.
So maintain a date and load data.
Award points if it solves your problem/concern
Thanks
Tripple k -
Delta records are not loading from DSO to info cube
My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
ShammaData is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue. -
Images are not loading - but work in Preview mode
Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-) -
Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank youYou can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large). -
How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.
When you shut down this window appears.
Uncheck the reopen box and it should stop this from happening -
In fire fox and google chrome CSS and images are not loading
I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
in fire fox and google chrome requests are Aborted.
thanks
Ashok Gadiparthi.Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com -
My games in Facebook, ie. GSN games, Slotomania are not loading !
My games in facebook are not loading, ie. GSN Games, Slotomania and many others. Why !!!
I have exactly the same problem as tess37 with the graphics of the maps in the facebook game Glory of Rome ([http://apps.facebook.com/gloryofrome]) since upgrading from Firefox 6.02 to 7.0 (and now 7.01). The main "city view"in the game is fine, but the world map (an important part of the game) is totally messed up. Both Glory of Rome and Kingdoms of Camelot are games by Kabam (as are Dragons of Atlantis and Global Warfare). As far as I can see the background images of the maps in Glory of Rome have the file format .png
It's still working fine when I switch to Google Chrome v14.0.835.186 or Internet Explorer v8.0.6 001.18702
I'm running Windows XP Home edition with SP2, in case that matters.
Below have have attached 3 images to illustrate the problem. The 1st image shows the map as it ought to be (using Internet Explorer 8). The 2nd image is what it currently looks like in Firefox 7.01 and the 3rd images shows what happens when I scroll the map in Firefox 7.01 -
Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!
It would help us help you if you provided a link to a non working page.
Maybe you are looking for
-
Nokia Lumia 1520: was just sold a prototype model,...
Hi everyone, subject explains it all. I bought the phone off someone in a local classified, now deleted of course, only to come home and find out that it is in fact a prototype. They showed me it worked and everything with a sim card in it, but it's
-
Error Rendering SELECT Element in Safari Under iOS (iPhone & iPad)
Hello, Our website contains three SELECT elements that are not rendering properly under Safari, iOS 4.2 on both an iPhone and iPad. If you load http://demo.campusguides.com in a normal browser (Chrome, FF, non-mobile Safari) you will see that the thr
-
I turned off facetime, if i restart my iphone, will it turn on and send the sms to apple to active again?
-
How to define complex type with table per record?
Hi, for one of my tasks I'm dealing with XML export. After short investigation of the postings in the forum I found an acceptable solution: Re: Convert ABAP to XML and Vice versa The issue is that I need an XML file like this: <plant> <material>
-
Simple Web Frontend for existing Java app
Hi there! (sorry for my english at first ;) I have an existing java app which currently is used via command line. It's a server application which mostly does monitoring outputs and functions you can use in the shell are like starting/stopping the ser