Migrateinstance issues with migrating the suffix data.

I am trying to use migrateinstance5 utility to migrate from iPlanet5.1 to SUN ONE 5.2.
(Not using the SUN packages , but it is a separate installation from compressed archive on a SUN box)
The data base of the sub-suffix is not getting migrated.
I was able to find the reason why this data is not getting migrated. This is how it is happening:
The main suffix name is say "o=mycompany" and the RDN of the sub suffix name is say "ou=sample".
(subsuffix DN ou=sample,o=mycompany)
The DNs of the database mappings under "cn=mapping tree,cn=config" are created differently in version 5.1 and Version 5.2.
In version 5.1 the mapping for the suffix is : cn="ou=sample,o=mycompany", cn=mapping tree,cn=config
where as in version 5.2 it is :
cn=ou=sample\, o=mycompany, cn=mapping tree,cn=config
Please note an extra space between \, and 'o' and also note in this case "ou=sample,o=mycompany" is one string (cn of the object - RDN)
Since the RDN and hence the DN of the objects is different between versions the migrate instace script is not importing the database thinking the target sub-suffix (version5.2) is different from the source sub-suffix (5.1).
I tried doing a modrdn on the new DN, it look like it is not permitted.
I am able to import the data using ldif2ldap though.
I was hoping that migrate instance will take care of it or I can work around it by modify the sub-suffix before running migrateinstance.
Any thoughts OR work arounds , sans explicit import of data.
Thanks

Hi,
why don't you just modify the new 99user.ldif file (add the linde with the attributes and objectclasses, delete the db number in EOF), export your old data and import them in the new directory? and then setup all your tuning and conf parameters.
That's what work's the best.
bye

Similar Messages

Issue with migrated assets

We have an issue with migrated assets a few years ago where some assets have now started depreciating in one depreciation area but not the others.
The assets had been retired at the date of migration. In order for them to correctly be shown as part of the opening balance for the year and also shown as being disposed during the year, in addition to loading their original cost, opening accumulated depreciation and depreciation for the year, a record was created in the ANEP table to show that the asset had been disposed of during the year.
The records were created as below:
This did not cause any issues until we upgraded to EHP 6 about six month ago. Before this, depreciation area 30 did not generate depreciation entries. Subsequent to the upgrade, depreciation area 30 started depreciating and posting depreciation to Group Currency.
For example, the asset below is not generating depreciation in depreciation area 01:
But it is depreciating in depreciation area 30:
Can anybody suggest how we correct the historic disposal record in ANEP for depreciation area 30?
Regards
Gareth

Thanks Ajay
The area is now set to post depreciation, which it did not before. To be honest, we actually prefer this as the previous configuration resulted in FX differences, which this does not.
Our only issue is with the assets that are now only depreciating in dep area 30 which we are trying to rectify.
The problem is that they have a NBV in area 30 which is incorrect. The other areas are correct.
Ideally we need to scrap them without generating a FI posting.
Any ideas?
Gareth

I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post.<br>
<sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

Issue with Oracle LONG RAW data type

Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/

Maddy wrote:
Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/below might work
12:06:23 SQL> help copy
COPY
Copies data from a query to a table in the same or another
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
            {APPEND|CREATE|INSERT|REPLACE} destination_table
            [(column, column, column, ...)] USING query
where database has the following syntax:
     username[/password]@connect_identifier

Two idocs with exactly the same data have statuses 51 an 53. Why?

Hi all,
There are two idcos with exactly the same data, however when they are processed, one is ok with status 53 whereas the other is not processed and has the status 51.
When I say same data, I mean both the idocs have the same message type, basic type, extension, partner no, partner type etc. Also, the data at the segment level is also the same.
Could you please let me know the reason for this?
Thanks and regards,
Anishur

Hi Azam
Me too faced the same for the Inbound Invoic Idoc Application . alternatively I used to get the error . Once 53 next 51 ... like that .It was the data issue in segment field E1EDS01-SUMME Total value of sum segment.It was resolved after ging the proper value .
Rgds
Sree M.
Edited by: Sree Merugu on Jul 2, 2008 6:14 PM

Issue with migrating 'WI' using 'TFS migration tool' when trying migrate from '2013 to 2013'

Hi ,
Our final destination is to migrate projects from TFS-2010 to TFS-2013, for testing and familiarizing with the
migration tool we trying to migrate project within the 2013 server and between two servers of 2013,
we don't have any issues with migrating source code, we done it successfully,
but when we try to migrate 'WI' within same server and also tried to between two server we are getting two
different errors respectively when tried within server and between server, unable to migrate 'WI' in any scenario, log files attached for the same. Log file 'error-1' is the errors generated while trying migrate 'wI' within the same server and 'error-2' is
the errors generated while trying migrate 'wI' between two server, Need ur guidelines to over come these issues.

Hi Sham,
Based on your description, I'd like to know the version of TFS integration tools you're using and the error details when migrate work items. If you use TFS integration tools 2012, please make sure you have Team Explorer 2012 installed on your server machine.
Please also let us know the configuration you used for the migartion. If you migrate between different domains, make sure the domains have two-way trust relationship. If the issue persists, check the event logs to see if there any useful information and
elaborate more details about your scenario with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

Having an issue with passing the text of a link to a session variable.

I am having an issue with passing the text from a link to a session variable. I am adding this html as a literal for each item in the list that i have populated with a query.
List<Literal> lit = new List<Literal>();
for (int i = 0; i < posts.Count; i+=4)
Literal someLit = new Literal();
someLit.Text=
@"<div class='row'>" +
"<div class='col-md-12'>" +
"<div class='panel'>" +
" <div class='panel-body'>" +
" " +
" <div class='row'> " +
" <br>" +
"<div class='col-md-2 col-sm-3 text-center' id='javascript'> <h3>" +
" <a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>" +
"</h3>" +
" </div>" +
" <div class='col-md-10 col-sm-9'>" +
"<h3><a href='Thread.aspx' runat='server' onserverclick='MyFuncion_Click'> " + posts[i] + " </a></h3>" +
" <div class='row'>" +
" <div class='col-xs-9'> " +
posts[i + 1] +
" </div>" +
"<div class='col-xs-3'></div>" +
posts[i + 2] +
" </div>" +
"<br><br>" +
" </div>" +
" </div>" +
" " +
" </div>" +
" </div>" +
" </div>" +
" </div>" +
"</div>";
lit.Add(someLit);
for(int i=0; i<lit.Count; i++)
this.Controls.Add(lit[i]);
I use one of the list positions as the text for a link in two different spots. For now, lets only talk about the line:
<a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>
Since I am generating these controls at pageLoad, I can't make them <asp:Linkbutton>s. And since they are anchor elements, I don't have access to an onCommand attribute or onservercommand attribute.
All I want to do is access the content from inside the specific link tags that I generate on link click and set it as a session variable. That's what I would like my UserProfile_Click function to do. I cant commandargs it in like i can with a linkbutton's
OnCommnad attribute, however.
My fear is that the onserverclick attribute resolves so something else on pageLoad normally and since I am generating it the way I am similar to the way a <asp:linkButton> resolves to a generated JavaScript.
Any help?

@Brunellus
For questions related to ASP.NET use the ASP.NET forum http://forums.asp.net
You should get more, better and faster answers on the other forum. Thanks, ahead of time.
Best Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....

What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

Issue with getting the entire spooled job into the pdf document

Hi All,
My scheduled job runs fine and completes successfully but it appears to have some issues with getting the entire spooled job into the pdf document which it sends to a an end user.Has anyone encountered it before.Your kind assistance would be appreciated.
Thank you.
Regards,
John

Hi,
Please read below link for your query:-
http://help.sap.com/saphelp_nw04/helpdata/EN/85/54c73cee4fb55be10000000a114084/content.htm
Regards,
Anil

Issue with Removing the Patch Set Software 9.2.0.8

Hi experts,
I have issue with removing the patch set software 9.2.0.8
I'm working on solaris box recently ugraded to 9.2.0.8 from 9.2.0.7. however i want to downgrade now. I have followed the document 4547809 mentioned. Now the real issue is when i restored the oracle_home (9.2.0.7) and execute sqlplus /nolog here is error message shown
bash-2.05$ sqlplus /nolog
bash: /oracle/test/920_64/bin/sqlplus: No such file or directory
bash-2.05$ lsnrctl
bash: /oracle/test/920_64/bin/lsnrctl: No such file or directory
Please help
thanks in advance

Hi,
Thanks for reply you are right
ls -l /oracle/test/920_64/bin/sqlplus was not exist. However i copied everything from the backup.
I'm trying again
cp -r bk_test_home/* /oracle/test/920_64/*
still i couldn't the file however it exist in bk_test_home. please suggest
Thanks and regards

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

Has anyone else had issues with dropping the wifi connections since upgrading to Yosemite

has anyone else had issues with dropping the wifi connections since upgrading to Yosemite

Looking at the Yosemite forum, it is obvious that this is a very common issue. You might want to post in that forum for help and advice.
OS X Yosemite

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Migrateinstance issues with migrating the suffix data.

Similar Messages

Maybe you are looking for