Migrating 10grel2 Application server from windows to linux server

Hi Friends,
Can you please share your experience or steps need to perform for migration o oracle 10grel2 Application server which runs on windows to linux server.
Best regards,
Rafi.

Hi Rafi,
There is no direct way to migrate. You need to install the fresh instance on Linux, and migrate the data across e.g. OID, SSO, Portal, Config etc.
Thanks,
Manpreet

Similar Messages

Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ?

Hi Friends,
Is it possible to Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ? ( as i would like to perform Point In Time recovery)
(or) The only way is to use RMAN convert as mentioned here - Transporting Data Across Platforms
(or) Is there any other method (except exp/imp and data pump)
Regards,
DB

HI
his post describes the procedure required to migrate a database from Windows to Linux using the RMAN Convert Database command.
Both Windows and Linux platforms have the same endian format, which makes possible to transfer the whole database, making the migration process very straightforward and simple.
To migrate between platforms that have a different endian format, Cross Platform Transportable Tablespaces (XTTS) needs to be used instead.
List of Steps Needed to Complete the Migration
The migration process is simple, but as it has several steps it is convenient to be familiar with them before running it.
1. Check platform compatibility between source and target OS
2. Start the database in read only mode
3. Check database readiness for transport from Windows to Linux using DBMS_TDB.CHECK_DB
4. Check if there are any external objects
5. Execute the Rman Convert database command
6. Copy converted datafiles, generated Transport Script and Parameter File to Linux
7. Edit the init.ora for the new database
8. Edit the Transport Script and Parameter File changing the windows paths to Linux Paths
9. Execute the Transport Script
10.Change the Database ID
11.Check database integrity
Thank you

Migration 10g to 11gR2 from Windows to Linux with 6TB DB Size in one step

Hi,
I need to do migration from 10gR2 to 11.2.0.2.0 and from Windows to Linux for 6TB database Size. As both Endian format same, I did the migration using RMAN Convert database on UAT but for same 10gR2 version.(Both Source on Target Oracle Version was 10.2.01.0). Now I have to migrate from 10gR2 to 11.2.0.2.0. So it's 2 way process.
is it possible to club these 2 way migration process ???
Are following steps right or any modification is required ??
1) Install 11.2.0.2.0 on Linux OS
2) Open Source Database (Windows) in Read Only. Generate TRANSPORT.SQL, CONVERTSCRIPT.RMAN & Pfile.
3) Copy Source datafiles in temporary location on Target OS. Also copy above files.
4) Create dummy controlfile.
5) Startup nomount with Changed pfile
6) Mount database with Dummy Controlfile.
7) Run CONVERTSCRIPT.RMAN to convert actual datafiles from Windows Platform to Linux Platform.
8) Shutdown the instance and delele Dummy Controlfiles.
9) Edit TRANSPORT.SQL and do Appropriate Changes like redolog files, datafiles path...
Now my question is, can I add ?/rdbms/admin/catupgrd.sql in TRANSPORT.SQL script after Startup upgarade command so that Complete Upgradation to 11.2.0.2.0 would be done.
10) Then run TRANSPORT.SQL on Target System (11.2.0.2.0)
Tell me if more inputs are required from my side...
Regards,
Manish

The directory structure is different...that's why you need to create the tablespaces in Linux. e.g. export dump says create tablespace in D:\..., there is no such thing in Linux. You can just export it, install software, create the db, tablespaces in Linux and import into the 10g in Linux.

Printing after Migration from Windows to Linux

We have just migrated 11.5.2 from Windows to Linux. I am not sure how to setup printers. In windows we simply had a UNC pointing to our Windows Printer Server and the Printers Queue. This was in the Printer Column and the Type was HPLJ4SI in the Type column under Install > Printer > Register....like this:
\\MYCOPRT03\PTS2245
Not sure what to put in linux. Currently we are getting this error:
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 7457024
Number of copies : 1
Printer : \\MYCOPRT03\PTS2245
/bin/sh: print: command not found
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 127
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 127.
Action: Review your concurrent request log file for more detailed information.

Chris,
It appears that these links are not savable.You need to refer to the docs in those threads for the steps you have to follow to setup a printer on Linux/Unix.
How to Setup Printer for Oracle Applications 10.7 - 11.5.x Quick Reference [ID 123140.1]
How to Test an Initialization String Outside of Oracle Applications [ID 106186.1]
How to setup Printer Arguments Within Oracle Applications [ID 73804.1]
Oracle Applications Character Printing [ID 112172.1]
lp: The printer or class was not found.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1As applmgr, source the application env file and issue "which lp" and make sure it is accessible by the OS user. If the command is available, then it is something with your printer definition -- Issue "system-config-printer" from the command prompt to launch the Printer Configuration Tool and configure your printer at the OS level.
Thanks,
Hussein

Migrating Repositroy from Windows to Linux

Hi,
How to migrating the repository from windows Server to Linux in OBIEE. Is there any process ?
Thanks !

Hi,
See the below link is helpful for you,
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/migrating-oracle-bi-siebel-rpd-file-from-windows-to-linux-2146407
Thanks,
Balaa...

Migrating database from windows to linux using dbca templates

Hi every one,
Is it possible to migrate Oracle10g database from Windows to Linux by using DBCA templates?????????????
If yes please guide me, as i tried it and am getting error while creating database on linux using DBCA templates of Windows server.
Warm regards,
Veeresh.S
(Oracle DBA)

With DBCA you can create a new database, delete a database, create ASM, and manage templates.
There's no option of migrating a database from one platform to the other. If you want to migrate your database from Windows to Linux you have 2 ways of doing it:
1 using IMP/EXP Export you db on windows and Import it on Linux.
2 Use across platform transportable tablespace if you db is already on 10g.
Regards,
Tony

I had migrated Oracle 10g database from Windows to Oracle 11g Linux

I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Please guide me where I have to begin (starting point) looking into it.
Some document stated gather system statistics. How to check system statistics is up to date
What are the crucial initialization parameter ?

Hi,
Let me just point you out to the documentation, which may concern you:
I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Managing Optimizer Statistics
How to check system statistics is up to date
Managing Optimizer Statistics
What are the crucial initialization parameter ?
Configuring a Database for Performance
Thanks &
Best Regards,

Migration from windows to Linux - JAR files not generating under JAVA_TOP

Hi DBA's
Jar files not generating under JAVA_TOP after migration from windows to linux.
I followed workaround but same in result.
Workaround
Run this command. It will give the missing file
adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy -masterArchive $JAVA_TOP -sync -reportfile javatopfiles.lst
Then run this command
adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy -masterArchive JAVA_TOP -sync -mode APPLY
I have checked in google.
Best Regards,
Suresh Gelda

Suresh,
I can find the following error in the log file:
JarSigner error output:
Exception in thread "main" java.lang.NoClassDefFoundError: sun/security/tools/JarSigner
Caused by: java.lang.ClassNotFoundException: sun.security.tools.JarSigner
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: sun.security.tools.JarSigner. Program will exit.Please review the following notes for suggested solutions:
Note: 393306.1 - Generate Jar File causes NoClassDefFoundError sun/security/tools/JarSigner
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=393306.1
Note: 269054.1 - Running adadmin to Force Regenerate of the Java Files Fails
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=269054.1

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10gR2 to 11gR2 from Windows to Linux with 6TB Database.

Hi,
I need to do migration from 10gR2 to 11.2.0.2.0 and from Windows to Linux for 6TB database Size. As both Endian format same, I did the migration using RMAN Convert database on UAT but for same 10gR2 version.(Both Source on Target Oracle Version was 10.2.01.0). Now I have to migrate from 10gR2 to 11.2.0.2.0. So it's 2 way process.
is it possible to club these 2 way migration process ???
Are following steps right or any modification is required ??
1) Install 11.2.0.2.0 on Linux OS
2) Open Source Database (Windows) in Read Only. Generate TRANSPORT.SQL, CONVERTSCRIPT.RMAN & Pfile.
3) Copy Source datafiles in temporary location on Target OS. Also copy above files.
4) Create dummy controlfile.
5) Startup nomount with Changed pfile
6) Mount database with Dummy Controlfile.
7) Run CONVERTSCRIPT.RMAN to convert actual datafiles from Windows Platform to Linux Platform.
8) Shutdown the instance and delele Dummy Controlfiles.
9) Edit TRANSPORT.SQL and do Appropriate Changes like redolog files, datafiles path...
Now my question is, can I add ?/rdbms/admin/catupgrd.sql in TRANSPORT.SQL script after Startup upgarade command so that Complete Upgradation to 11.2.0.2.0 would be done.
10) Then run TRANSPORT.SQL on Target System (11.2.0.2.0)
Tell me if more inputs are required from my side...
Regards,
Manish

This forum deals with migrations from foreign databases to Oracle.
You might better post your request in this forum:
General Database Discussions

Utl_file gives error when coping file from windows to linux

Red Hat Enterprise Linux Server release 5.7 (Tikanga)
Oracle 11.1
Hi there,
I can't copy a file with utl_file.fcopy after copying file with samba from winodws to linux. Only after I open the file on linux and save it, can I copy it :
1.) Copy file from windows (drag and drop)
2.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
BEGIN utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv'); END;
ERROR at line 1:
ORA-29284: file read error
ORA-06512: at "SYS.UTL_FILE", line 270
ORA-06512: at "SYS.UTL_FILE", line 1243
ORA-06512: at line 1
3.)su to root
4.)open file and save it with vi, without changing anything
5.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
PL/SQL procedure successfully completed.
How can I copy from windows to linux with samba, so this doesn't happen?
Please help

After the file is initially created in Linux:
What are the owner and group for the directory in which the file resides?
What are the directory permissions?
What are the owner and group for the file?
What are the file permissions?
What is the OS name of the oracle user?
After root vi's and resaves the file:
What are the owner and group for the file?
What are the file permissions?

Transfering files from windows to linux

Hi,
My requirement is Client will select files from widows and then click zip.In server(linux) i have to get those files and zip.Here i am unable to get the files sent by the client.
Suppose client will select the file in C:\xxx then click zip.In linux am using request.getParameter() from getting those files.Here in linux it is getting the path of the file as C:\xxx and unable to locate.Giving FIleNotFound Exception.
How can resolve this issue.
Regards,
Babu

Hi Boss am getting the problem in transfering files from windows to linux.
In linux it is unable to locate the file which was selected by the client in windows.
Am using request.getParameter () to get the file.How to solve this.

How to access a file in Unix server from windows using java

I want to access a file in unix server from windows using java program.
I have the following code. I am able to open the url in a web browser.
String urlStr="ftp:user:passwd@unix-server:ftp-port//javatest/test.csv;type=i";
URL url = new URL(urlStr);
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream)));
String inputLine;
while((inputLine=in.readLine()))!=null){
System.out.println(inputLine);
in.close();
I get the following error
java.io.FileNotFoundException: /javatest/test.csv
at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.java:333)
at java.net.URL.openStream(URL.java:960)
at com.test.samples.Test.main(Test.java:45)

urlStr="ftp:user:passwd@unix-server:ftp-port//javatest/test.csv;type=i";
I have given the format of the urlStr that I am using in the code. The actiual values are used in my code. I have tried pasting this url in the browser and it opens the file.

Hello, How do I tell sql+ to spool output file from windows to Unix server?

Hello, How do I tell sql+ to spool output file from windows to Unix server?
I am new to SQL+ and just learned how to spool the file. But file is saved in my local windows enviroment and since it's 2GB in size...I want to spool it directly to another remote unix server.
Pls answer in detail... I have been to most of the thread and didn't see relevant answer to above question.
Am I suppose to develope some script which FTP the spool file directly to the server I want to
or
i Have to use UTL_FILE Package ?
Thanks for reply

You may not be able to...
SQL*Plus can only spool to the local machine. If you have mapped a directory on the Unix server from your Windows machine, you can specify that directory in your SPOOL command.
You could telnet to the Unix server, run SQL*Plus there, and spool the file to a local (Unix) directory.
If the Unix server is also the Oracle database server, you could use the UTL_FILE package rather than using SQL*Plus to spool a file.
If the Unix server is also an FTP server, you could also FTP the file from your local machine to the server.
Of course, I would tend to re-examine a requirement to regularly generate a 2 GB text file. It seems likely that there is a better way...
Justin

HT2518 migration is taking forever from windows 7 via wireless. can i stop it and connect wired?

File migration is taking forever from Windows 7 pc. Can I stop and reconnect using usb 2.0?

Your only option in that respect would be to create an adhoc Wi-Fi network with the Windows 7 device. And no, you could not connect the iOS devices via cable to connect them to that network. You can share the iOS device cellular internet capability with a computer via Personal Hotspot, but the iOS devices do not have the capability to connect to a wired network or to a computer's internet via a cable.

Migrating 10grel2 Application server from windows to linux server

Similar Messages

Maybe you are looking for