Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8
I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
Hi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Similar Messages
-
Exchange 2010 SP2, Update Rollup 7
Our setup before we applied Rollup 7:
Exchange 2010, SP2 Update Rollup 6 running on all servers.
2 Mailbox servers w/ DAG
3 CAS/HUB Servers using a hardware load balancer
No problems prior to the Rollup 7 installation.
The Rollup went fine on 4 out of the 5 Exchange Servers. On the 5th server, however, there are problems. The first time I tried to install RU7 it was about 5 hours in when I cancelled it. So I tried again and the install has been running for 13
hours and it appears to be only about 40% complete. The progress bar has been stuck in the same spot for nearly all of that time. Per an article I found on Susan Bradley site (SBS Diva) I had verified that "Check for publisher's certificate revocation"
was disabled in IE prior to the start of the install.
I have seen Service Packs take a long time in the past and I have Rollup Updates take a long time too, but this is taking a very long time.
Anyone else observing this issue with this latest Update Rollup for Exch10, SP2?
Thanks.Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks -
Exchange 2013 SP1 and Exchange Online Protection (EOP)
Hello, I have just set up a new install of Exchange 2013 and connected mail flow with EOP. Mail is flowing, and I can access emails through the Outlook Web App. However, I cannot get Outlook 2013 to link up to the new configuration. I got Outlook for Mac
to work, no problem. But, I get an error on outlook 2013 that says it must sync folders for a first time to open.
Any help would be appreciated.
Thanks!Hi
Use another user to test, check whether he can use Outlook to access his mailbox or not?
If this user also cannot connect to his mailbox, I suggest you go to check whether all the Exchange services are started, make sure RPC client access service is started.
You do need to replace the self-signed certificate.
If you don't want to buy a certificate from a Third-Party Issuer, then install Windows CA and issue a certificate from there.
Even if it does work with the self-signed certificate using Outlook 2007, it is not a supported configuration and you will not be able to connect with Outlook 2010/2013.
I have seen new installation of EX13 having SSLOffloading turned on causing the problems. Turn if off if you do.
Set-OutlookAnywhere -Identity 'SERVERNAME\rpc (Default Web Site)' -SSLOffloading $false
Let us know the output of the above so that we can proceed further.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011
Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas? -
Exchange 2013 SP1 users not receiving quota warning email message
Hi,
We are on Exchange 2013 SP1 and Exchange 2010 SP3 co-existence mode and currently migrating users from Exchange 2010 to 2013. We have noticed that users are not receiving email message when their mailbox quota warning when its near to maximum limit.
If I log in via OWA it shows the notification (Pop up) that your mailbox is almost full but no message received in email. Most of the users do not log into OWA but only uses Outlook.
It looks like other people are also seeing this similar issue but I am unable to find any solution for it.
How users will know if their mailbox is almost full if they are traveling and only using Mobile phone for emails to send and receive.
Thanks,
RamanHi Thanks for your response. Our Quota is set on Database level. I am seeing these event ids as well.
Log Name: Application Source: MSExchangeIS Date: 12/31/2014 10:07:12 PM Event ID: 1077 Task Category: MAPI Level: Warning Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f on database
326f0997-4fe5-4b31-873b-6a3396e7a91c is approaching its storage limit. A notification has been sent to the user. This warning will not be sent again for at least twenty four hours.
========================
Log Name: Application Source: MSExchange Store Driver Submission Date: 12/31/2014 10:07:12 PM Event ID: 1012 Task Category: MSExchangeStoreDriverSubmission Level: Error Keywords: Classic User: N/A Computer: Exch2013mail01.company.com Description: The store
driver failed to submit event 8237691 mailbox e3d48b23-0740-46ab-89f7-3b035dacf28f MDB 326f0997-4fe5-4b31-873b-6a3396e7a91c and couldn't generate an NDR due to exception Microsoft.Exchange.MailboxTransport.StoreDriverCommon.InvalidSenderException at Microsoft.Exchange.MailboxTransport.Shared.SubmissionItem.SubmissionItemUtils.CopySenderTo(SubmissionItemBase
submissionItem, TransportMailItem message) at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.GenerateNdrMailItem() at Microsoft.Exchange.MailboxTransport.Submission.StoreDriverSubmission.MailItemSubmitter.<>c__DisplayClass1.<SubmitNdrForFailedSubmission>b__0()
at Microsoft.Exchange.MailboxTransport.StoreDriverCommon.StorageExceptionHandler.RunUnderTableBasedExceptionHandler(IMessageConverter converter, StoreDriverDelegate workerFunction).
Raman -
Exchange 2013 SP1 Not Receiving e-mail
Hello,
Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
Exchange 2013 setup is Exchange 2013 sp1 DVD
Exchange 2010 when sending mail to external it's ok.
Exchange 2010 when sending mail to exchange 2010 users it's ok.
Exchange 2013 when sending mail to External it's ok.
Exchange 2013 when sending mail to exchange 2010 users it's ok.
or
Exchange 2010 when sending mail to exchange 2013 not working
Exchange 2013 when sending mail to Exchange 2013 not working
From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
organization;
1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
All server is region setting Turkey
Exchange 2010 error
451 4.7.0 Temporary server error. Please try again later. PRX4
Exchange 2013 error
451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
thanksHi,
From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500
I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request -
Cross-forest migration to Exchange 2013 SP1 and Outlook 2013 SP1
Hello! I have two forest: Exchange 2010 SP2 RU5 - resource forest and Exchange 2013 SP1 - account forest. I make cross-forest migration from resource forest (linked mailboxes with account forest) to forest with Exchange 2013 SP1.
I have moved mailbox from resource forest exchange 2010 to exchange 2013 sp1 forest.
Outlook 2010 connect to migrated mailbox without any problem, but outlook 2013 sp1 cannot connect to migrated mailbox.
Error look like - cannot find exchange server.
I created new mailbox in Exchange 2013 organization and can connect to it with outlook 2010 and outlook 2013 sp1.
Someone have the same problem with migrated mailbox? How to solve it?
Truly, Valery TyurinYou can use New-MoveRequest to perform a cross-forest move. Here is a well post and step-wise explanation you can check for cross forest migration from exchange 2010 to exchange 2013(http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/).
Moreover, you can try this utility (
http://www.exchangemigrationtool.com/ ) to accomplish this task. -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!
Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
As you can see from the error above ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
virtual folders?!
What I’m missing here?! Please help.Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
To check whether inheritance is disabled on the user:
1.Open Active Directory Users and Computers.
2.On the menu at the top of the console, click View > Advanced Features.
3.Locate and right-click the mailbox account in the console, and then click Properties.
4.Click the Security tab.
5.Click Advanced.
6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
Ref:
http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
Also check the Virtual directory authentication
Microsoft-Server-ActiveSync
•Basic authentication
•SSL required
•Requires 128-bit encryption
Ref:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Check the IIS log if you are able to find any error message on it
Exchange Queries -
Migrate to Windows 2012 R2 and Exchange 2013 SP1 using database portability
Hi, I'm planning to migrate from Exchange 2013 SP1 running on Windows 2012 to Exchange 2013 SP1 on Windows 2012 R2.
Is it possible to use database portability to move the databases from the exchange installation on win 2012 to the new installation on Win 2012 R2? This would save a great deal of time not doing the mailbox moves.
I've searched similar cases but couldn't find any, all speak about disaster recovery and database portability but I've found no articles that uses the migration scenario.
Would it be possible to do and if so, what would the steps be? Do I need to delete the database from the source server, move the database files to the new server and mount them and relocate the mailboxes? Or should I dismount the database on the source server,
move them to the new server and mount them and relocate the mailboxes?
Frank.Hi,
According to your description, I recommend you consider using DAG to achieve your requirement.
The following steps for your reference:
1.Prepare a new server which installed windows 2012 R2 for Exchange 2013 mailbox server.
2.After you deploy Exchange 2013 Mailbox servers, you can create a DAG, add Mailbox servers to the DAG, and then replicate mailbox databases between the DAG members.
3.After replication, you can mount all the databases on the new server.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
This no way a resolution. This won't work at all as Both OS will be different and you can't form the Cluster.
Please Unmark it!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjancShould we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent -
Exchange 2013 SP1 and SCOM 2012 R2
Hi there,
Hopefully someone can assist me with this issue, if it is one...
I am halfway through an Exchange migration, from Exchange 2010 SP3 on Server 2008 R2 to Exchange 2013 SP1 on Server 2012 R2.
76 users in total, roughly 80GB of Public Folders.
I have configured the 2013 environment with a cross datacenter DAG, also increased all of the timeouts of the cluster to take this into consideration, and everything appears to function as expected.
Added both 2013 machines to SCOM 2012 R2 for at least a week with no active users on it, and all monitoring reported ok, no issues.
Exchange 2010 is configured to use webmail.company.com for RPC over HTTP, which is what I have configured 2013 to use as well.
Implemented Microsoft ARR for client access to Exchange 2013, as opposed to ISA we've used for Exchange 2010.
A week ago, changed the DNS records for webmail.company.com from ISA to ARR, and all clients connected perfect.
Thought, ok, now we can start the migration. So far everything "seems" to be going perfect with the mailbox moves, however, SCOM is really noisy.
Attempted to reran the probe for EWS and got the error below:
Is there perhaps anyone that can assist me with these errors?
CheersFYI... IIS ARR is not supported for Exchange Server.
Check in event log if you are getting anything related to the issue.
About Outlook POP UP to end users. Check the event log on 2010/2013 for MRS events.
Are those mailboxes still moving or in move request?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
+ FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible. -
Exchange 2013 SP1 | Another HTTP 500.0.0 Error
Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Using file adapter, got "Sender Agreement not found" error
I used file adapter in my CC and defined all the necessary objects. When I tried to test the configuration and I kept getting "Sender Agreement" error. Also the chache is cleared too, searched the forum already, couldn't find any clue Not sure what I
-
When I visit a website, close Firefox, then reopen Firefox to go to another website, the previous one loads automatically. Why? How do I turn this off?
-
Bridge place command no longer works for indesign 2014
Bridge place command no longer works for indesign 2014. It only gives Photoshop as an option. How can I get all other Adobe programs listed under Place ?
-
Hi Dear; in landed Cost, if we enter the costs in a cuurency different than the document currency, always it multiply these cost by the exchange rate. why? exp: Document currency: USD Local cuurency: Eur Exchange Rate: 1USD=0.9 Eur
-
My itunes crash when accessing the library of IMatch
My itunes crash when accessing the library of IMatch. I'm using Windows 7 64 bit. this error is occurring in the last update.