Migrating a MW4 site to MW8

Hi,
Please can anyone help - I have recently upgraded to CS2,
include dreamweaver 8 from Dreamweaver 4. I can't find any details
on migrating the site and when I tried to import to 8, everything
was 'greyed' out. Asking for .ste file which I can't find anywhere.
Is the answer to rebuild the site or is there a quicker, easier
way? Any help much appreciated. Many thanks
Gertie

No migration is required. Just define your DW8 site to point
to the root of
the DW4 site and you are good to go.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"gurtrude" <[email protected]> wrote in
message
news:f0sjrn$qgg$[email protected]..
> Hi,
>
> Please can anyone help - I have recently upgraded to
CS2, include
> dreamweaver
> 8 from Dreamweaver 4. I can't find any details on
migrating the site and
> when
> I tried to import to 8, everything was 'greyed' out.
Asking for .ste file
> which I can't find anywhere. Is the answer to rebuild
the site or is
> there a
> quicker, easier way? Any help much appreciated. Many
thanks
> Gertie
>

Similar Messages

Migrating on premise site collections to SharePoint online using powershell

Hi folks,
Intention:-migrating on premise site collection to SharePoint online.
Is there any power-shell script or list availabe products.
Please give idea and let me know that script.
Thanks,

Hi Jio333，
This issue has been discussed in Sharepoint forum:
SharePoint 2013 - Migrate
from SharePoint 2013 On Premise to SharePoint 2013 Cloud
To complete this kind of Migration task, we usually use 3rd party tools because they have some complex migration requirements.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

I'm migrating a WP site to BC. I want to use a web app for their Blog...is there any way to have the web app item show in the root url vs root-url/web-app-name/web-app-item-name?

Hi Justin,
There's nothing like that atm. Please see http://forums.adobe.com/message/4730854
Cheers,
-mario

How to migrate a dreamweaver site from CS4 to CS6

I have a full site with design time and other information configured in Dreamweaver CS4. How can I migrate my entire CS4 site to CS6?
Jim

Hello James,
maybe it's too late now, but you could have a look here anyaway:
http://helpx.adobe.com/dreamweaver/using/import-export-dreamweaver-site-settings.html
Hans-Günter

Migrating a test site to an existing BC site

I am trying to migrate a site creating as a trial using a BC GURUS template to an existing e-commerce site hosted by BC.
Is there any easy way to do this without having to recreate modules, web forms, etc - basically all the work I did with the trial? I'd love to just ditch the existing site and go with the new one, but I would be forfeiting customer orders, cases, and pretty much all reports, etc, right?
In the future I am definitely creating a test directory within the existing site to avoid this mess, but any help would be greatly appreciated.
Message was edited by: Liam Dilley: All caps title edited

You likely have an empty text box or box somewhere. See this thread for the fix: Muse Bug | Graphics Shift Randomly, Why?

Migrating from legacy site / dreamweaver templates

We are going to migrate to the weblogic portal content management over the next few months - we have thousands of pages on our old site that were created using dreamweaver templates.
Is there a way to automate the migration - to import the old html files? I could use the dreamweaver template to strip out the old design. But then how would I import it? What have other users done when migrating from an old static site to a content management system?

You can use bulk loader utility of WLP. Please see the link http://edocs.bea.com/wlp/docs102/cm/bulkloader.html

Migrating SP 2007 site which is using the template Project Workspace (Id 6215) to SP 2013

Hi,
We have our SharePoint 2007 with project server installed on it. It is only one server having all of the components including SQL server and SP 2007. We are planning to migrate one of the site which is using the
Project Workspace Template(Id 6215) to the SP 2013 environment using Database
Attach Method.
Questions:
1) Is there any workaround available we can migrate the site to SP 2013 without
installing project server?
2) If there is no other workaround, we may need the justification or supports articles to share with our management.
Looking forward to hearing from you guys.
Regards,
Zulfiqar

Hi,
According to your description, my understanding is that the error occurred when you tested the database.
I recommend to check if the site template exists in the folder located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\1033\XML.
If yes, then restart the SharePoint machine and run the PowerShell command Test-SPContentDatabase again.
If not, please re-install the template to see if the issue still occurs.
If the sites with issue are no longer needed, then you can delete the sites with issue. Or you can
rename the site template with a standard template id.
More references:
http://www.sharepointnadeem.com/2014/01/sharepoint-2013-missingsitedefinition.html
http://red1s.wordpress.com/2012/08/16/sharepoint-2010-missing-site-definition-error/
http://sharepointgeorge.com/2009/upgrading-content-db-sharepoint-2010-part-1-preupgradecheck/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Migrate a GoLive site manually to Dreamweaver

I tried migrating the site manually from Adobe after the
GoLive/GL2DW extension locks up on the Components in GoLive
http://www.adobe.com/devnet/dreamweaver/articles/migrate_golive_dreamweaver.html
In the Article it covers how to migrate the Templates and to
change the extension but it doesn’t say a thing about the
Components
Does anyone know if you are supposed to make a new folder and
follow the same directions as the Templates and label it Library
and drag the components into that and then in Dreamweaver change
the extensions to .lbi?
I called GoLive Support yesterday and they did not know.

Define the site in DW to point into the root folder of the GL
site. You are
done.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ricksef" <[email protected]> wrote in
message
news:f44gaf$iht$[email protected]..
>I tried migrating the site manually from Adobe after the
GoLive/GL2DW
>extension
> locks up on the Components in GoLive
>
>
>
http://www.adobe.com/devnet/dreamweaver/articles/migrate_golive_dreamweaver.html
>
> In the Article it covers how to migrate the Templates
and to change the
> extension but it doesn?t say a thing about the
Components
>
> Does anyone know if you are supposed to make a new
folder and follow the
> same
> directions as the Templates and label it Library and
drag the components
> into
> that and then in Dreamweaver change the extensions to
.lbi?
>
> I called GoLive Support yesterday and they did not know.
>
>

Exchange 2013 migration between AD sites

Hello,
I am preparing a migration from one Exchange 2013 Cu6 server to another 2013 CU6 server in the same domain in a different AD site. Each server is HT and MB server, hosting its own DB. There is no DAG between the 2 servers.
I am planning to use coexistence between the servers during the migration when I move mailboxes from one server to the other. The move should be transparent to the users. Outlook should detect the move and find it automatically.
I configured one namespace for all URLs, identical on both servers like "mail.organization.nl" for AS, OA, OWA, ECP and autodiscover.
Would this work? I read here it will: The article is referrning to a DAG spanned over 2 sites, which I do not have.
http://blog.netwrix.com/2014/03/21/configuring-exchange-2013-for-site-resilience-2/
Any advice on performing this migration without issues?
Thanks

Hello,
I am preparing a migration from one Exchange 2013 Cu6 server to another 2013 CU6 server in the same domain in a different AD site. Each server is HT and MB server, hosting its own DB. There is no DAG between the 2 servers.
I am planning to use coexistence between the servers during the migration when I move mailboxes from one server to the other. The move should be transparent to the users. Outlook should detect the move and find it automatically.
I configured one namespace for all URLs, identical on both servers like "mail.organization.nl" for AS, OA, OWA, ECP and autodiscover.
Would this work? I read here it will: The article is referrning to a DAG spanned over 2 sites, which I do not have.
http://blog.netwrix.com/2014/03/21/configuring-exchange-2013-for-site-resilience-2/
Any advice on performing this migration without issues?
Thanks
Mailbox Moves are pretty seamless, so not a concern.
As far as the CAS namespaces. How are you handling that ? Load balancing between the CAS? Round Robin DNS? Or are you going to cut everything over at once and change DNS to point to the new server? Are both CAS accessible from the internet?
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Issues with migrated SHarePoint 2010 sites after Mount-SPContentDatabase command and claims powershell upodate

Hi,
I am getting issues when trying to access these new SharePoint 2010 Mode Web Applications I have migrated to SharePoint 2013. A record pointing to WFE Cluster OK. Problem is sometimes I get a blank page, sometimes I get prompted with a password, sometimes
I get the site, but style is poor and sometimes I get a page that looks fine (it always takes a long time - there are ping issues). I have had a quick look around and noticed that this can be the Request Management Service. I have it running on all 3 WFE along
with Distributed Cache. This is really worrying and it is having a big impact on me progressing.
Any ideas. Reluctant to run some powershell commands some people have recommended as they could cock things right up.
Thanks.
John

Hi John,
if you have load balancer you can stop Request Management.
But my advice that you need to check the ULS logs, try to set the diagnostic logging to verbose and catch the errors in the logs and send them.
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Aspx page giving error while migrating to another site

Hi there,
I have an existing aspx page on one SharePoint site. I have created a new site, where I want to move this page.
I have downloaded the aspx page to my local system and uploaded the same to the new site.
But when I click on the page it is giving me the following error:
Error
This
page is not using a valid page layout. To correct the problem, edit page
settings and select a valid page layout."
Troubleshoot
issues with Microsoft SharePoint Foundation.
Correlation ID:
However, on both sites, the page exists on Document library named Pages.
Thanks for your concern.

Hi aquariusabhi,
According to your description, my understanding is that the Page Layouts was missing for a site in SharePoint Designer.
For this issue, there is a common scenario:
You have a subsite in a site collection
The publishing feature is activated in the subsite, but not in the site collection
You want to edit/add page layouts on the site collection level, to be used within your subsite
When you open the site collection in SharePoint Designer, you can't see Page Layouts in the Site Objects panel
You now have 2 options: you can either activate the publishing feature in the site collection (and the Page Layouts link comes back), or you can use the All Files link and browse to the master pages and page layouts library (_catalogs > masterpage.)
Either option will do, unless you really don't want the publishing feature in the site collection.
More information, please refer to the link:
http://www.myspblog.com/2011/04/page-layouts-missing-sharepoint.html
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Migrating current web site to Portal

Where can I get information (hints, tips tricks) for migrating our current web services to Portal. We're running an Apache web
server and have a lot of content created through FrontPage. We also have several services provided via Perl .cgi scripts. Is there
some white paper or FAQ on how to proceed? We currently have Portal 9iAS vers 1 and my DBA is struggling to get vers 2 up and
running. Thanks for any assistance that can be provided.
Regards,
Ron

Hi,
I am also looking for a WhitePaper / Article that suggests some best practices, faq, etc. I will be shortly migrating some static & dynamic content from a WebServer to Portal & need to know some collected thoughts of wisdom.
Please do let me know about any leads on this.
Regards,
Sandeep

Migrate OD Users Sites folder only

Hey all,
Here at our school we have server that we wipe every year and re-add our users to clear out our graduating students, upgrade our machines, etc. The faculty have decided that for those students that are not graduating they want to setup a website in each of their user folders that the students can have for all four years of school. We have students now who have websites from last year and I want to move their folders over.
Is there an easy way to move over all the Sites folder for each user to their new home folder without having to do it 1 by 1 for each user?
Thanks in advance.

Make sure that the files you need are being synchronized on a regular basis with the server. For Address Book, this means ~/Library/Application Support/Address Book.
For iCal, it's: ~/Library/Application Support/iCal/
Oftentimes (and by default in the Background sync tab), either in the Login and Logout sync or in the Background Sync tabs in the Mobility preferences for a user, ~/Library/ (and therefore the directories underneath it) are excluded from synchronization. Getting these off of the excluded list will make sure that they get included.
Check other threads on portable/mobile home directories for things in the ~/Library folder than you may not want to have sync, like the ByHost preferences.

Recovering Dreamweaver 3 preference and site info, ultimately migrating to cs5.5 on Windows XP

I had a hard drive failure in windows xp and have reinstalled windows xp and dreamweaver 3. I have a backup of all my dreamweaver 3 files from the old machine, for example &sitename.dws, &sitename Changed.txt, &sitename Live.dws, &sitename Changed.txt. I would like to have all my preferences, ftp info, etc. restored but cannot find any documentation on how to do that in Dreamweaver 3.
I tried replacing the following files with the backup versions:
C:\Progam Files\Macromedia\Dreamweaver3\Configuration\SiteCache
C:\Program Files\Macromedia\Dreamweaver3\Configuration\SourceFormat.txt
as these were the only files I saw that appeared to have been modified by using Dreamweaver on the XP machine before the drive failure.
Is there any Dreamweaver 3 documentation about the names of preferences files, site files, and how to replace the default install files with backed up versions?
All help is sincerely appreciated as I have not been able to figure this out on my own. I considered just replacing all the DW install files with my backup, but that would probably mess up the registry and I can't chance that.
Ultimately I will be moving to CS5.5--if I ever get my backed up information into my newly installed Dreamweaver 3, is there a way to migrate those preferences, site info, etc. to CS5.5?

Murray 'ACP', you are correct--DW3 does not have the option to back up to *.ste files, so I believe that pzciena is correct in stating that site information in DW3 is found in the registry and I can't recover that using files from my drive backup. The reason I asked the question is because I am having trouble when using the FTP "Put" function to FTP files over to my website. The "Put" operation creates a subdirectory to the root file on the host.
The host directory is named "web" and I specify /web in my dreamweaver remote host site definition. The "Put" operation creates a subdirectory using the same name as my local files subdirectory. That is, on the local side, the file I am "put"ting is in subdirectory /hostsave and when it FTPs to the remote side, it creates a directory named "hostsave". I deleted that directory on the remote side and tried FTPing a second time and it created the directory again. This does not happen if I use Ipswitch to FTP the file, but I would prefer using the file transfer within dreamweaver since it checks to make sure I'm ftping all the image files in the .html file I'm PUTting.
I obviously have not re-created something correctly in redefining my site. ????

Migrating a MW4 site to MW8

Similar Messages

Maybe you are looking for