Migrating a user changed her status

I am migrating to a new iMac. I am trying to merge users from two computers. I used migration assistant to merge all the data from my G4 PB, which went fine. Next, I ran migration assistant and connected to our G4iMac, to try to migrate my kids and my wife, so at the end we would all be on this new machine. I just migrated the users, and it went fine for my kids, but my wife was now listed as a user group, not a user. When I tried to do it again, OSX wanted a new short name. I deleted my wife's "group" from the user list, but when I try to add her as a new user, or use Migration assistant again, she is still listed.
Is there anything I can do to make the mac recognize her as a user and not a user group?
Thanks.

Well I did a bit of a Google search on binding and found the following:
http://discussions.apple.com/thread.jspa?threadID=2145785
Which led to these instructions (Setting up trusted binding in an LDAP directory):
http://docs.info.apple.com/article.html?path=ServerAdmin/10.5/en/c7od29.html
Followed them and still I do not seem to be able to make this a mobile account
I suppose I could use carbon copy to first copy her home directory to the server and then delete her account but I thought there might be an easier way.
Is this all because the name and shortname on her local account is the same as the name and shortname on her network account?
Paul

Similar Messages

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

User exit or other enhancements to change the status of the kanban.

The requested to trigger the movement when the kanban status changed from empty to full.
if itu2019s possible to use user exit or other enhancements to change the status of the kanban.
can you please guide me iam new for enhancements.

I think you're seeing standard SAP behavior. However, a discussion with your SD/LE functional team member might be beneficial. Personally, I don't think SAP supplies a way to "add back" to that quote. However, you might develop something that changes the quantity on the quote (essentially adds to the original quantity), based on the fact that a SO line got rejected.

How to disable other users from changing the status

Hi,
The status entry field can be changed irrespective of ownership in Documents.
I was able to change the status on the document created by other user.
Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
How to disable other users from changing the status?
Regards,
Shashi

This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
Regards,
Pradeepkumar Haragoldavar

User exit in VA01 for changing the status profile

Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
Santosh

Hi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
    OBJNR                          = XVBAK-OBJNR
    STSMA                          = G_STATUS
NO_CHECK                       =
EXCEPTIONS
   OBJECT_NOT_FOUND               = 1
   NO_STSMA_CHANGE_POSSIBLE       = 2
   STSMA_NOT_FOUND                = 3
   OTHERS                         = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u.

Cancelling a absence request haas not changed the status by the user

Hi experts,
An absence request has been cancelled,. Looking in Status Monitor, i will see that the reuest has been cancelled, but the user see the status stay on "Pendig For Approval". Normally the user will see the Absence Category set to Cancelled, but not "Pending For Approval". The reason is unknown to me. Thus i need your support.
Thanks in advance
Mehdi

Just to confirm my understanding, are you saying that:
1) Employee requested an Absence through SSHR Leave of Absence
2) An administrator queried the absence in the Workflow Status Monitor and Cancelled it
3) Now that absence is showing to the Employee as 'Pending Approval'
Is that right? You mention 'Normally the user will see...'. When you say 'normally' what is the behaviour you expect?
If I've understood you correct this is the behaviour I would expect: cancelling a workflow does not change the status from 'Pending For Approval' and it definitely does not change the Absence Category on the absence. Cancelling an absence via this route isn't really recommended because - as you are seeing - it gets stuck. It's best to get the approver to reject the absence instead.
To remove this cancelled absence, take a look at these Oracle Support articles:
Unable To Remove Cancelled Workflow Item Related To LOA Transaction [ID 1123714.1]
How to Purge Obsolete Workflow Runtime Data (FNDWFPR) for HR Workflow Completed Processes [ID 237564.1]
How to Run the HR Workflow Cleanup Process (HRWFDFCT) [ID 237524.1]

Migrated family user to laptop....want to keep apps but change user and iCloud, calendar, email association

migrated family user account to my laptop. have my own identity and user on laptop including iCloud account, email set-up, etc. Now need to take the migrated user account and change it to the new identity I established...that way will retain the apps and documents, etc.....but need to associate it with correct iCloud account, email settings, etc. Doesn't seem straightforward. Any suggestions?

Delete and redownload those applications.
(120219)

I gave my wife a new Ipad 2 she gave me hers old one How do I change her name to mine and get access to my emails

I gave my wife an ipad 2 she gave me her old ipad how do I change her detail to me and access my email account on her Ipad
This will be I guess the first of many questions
Thanks

You really should download and read the user guide that roaminggnome gave you the link for in the post above.
If you want to totally start from scratch and erase all of her content go to Settings>General>Reset>Erase All Content and Settings. This removes everything from the device and returns it to out of the box status. You can also restore the iPad as a new device in iTunes and that erases everything as well. This article explains that process.
http://support.apple.com/kb/ht1414
If you want to rename the iPad, connect the iPad to your computer and launch iTunes. Double click on the text of the iPad's name on the left grey source list of iTunes and you can change the name of the iPad. When you are finished typing in the new name, hit the return key on your keyboard. This article explains it for you.
http://support.apple.com/kb/ht3965
You will want to delete her mail accounts on the iPad if you have not done so already and set up your own mail accounts. This article will tell you how to do that.
http://www.apple.com/support/ipad/assistant/mail/

Multiple user creation in R12 and migration of users

I would like to know how we can automate a process of user creation in R12, or is there a way to create multiple users in Ebiz with respective responsibilities.
Second case is, migration of users from one instance to another. The problem out here is selective users not all?
Regards

Pl search the forums for FND_USER package - you will find several hits that show how this package can be used in a programmatic fashion to bulk create new users and assign responsibilities. Examples are also available on My Oracle Support.
To migrate user, use FNDLOAD. See this doc - you will also find hits in these forums if you search.
376469.1 - Can FNDLOAD Migrate User Accounts Without Forcing Users To Change Their Passwords?
HTH
Srini

How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
If anybody has an idea about SAP documents please help me
Thank you,
Regards,
Ramesh

First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

CRM ORDER CHANGE AND STATUS MANAGEMENT - workflow

Hi,
We have created a Changed method for bus2000120 which is configured to fire when the Order is saved via Status Management. We have added an entry to BSVW for the object, bus2000120.changed with no restrictions. We have also created a function module that checks to see if the user status is E0005 or E0007 or it deletes the object from the Event table. I see that this works correctly, however, a given SAVE of a transaction is firing 2 bus2000120.changed for the exact same user and system status. (I know that it is firing 2 bus2000120.changed because I ran swels and swel. The event was listed twice. Please remember that the Event table when read directly after the save only lists bus2000120.changed one time.)
There is only 1 entry in the event linkage(swetypv) for bus2000120.changed and it has a condition of the same user status, e0005 or e0007. No real problem here, however, since there were 2 firings it runs the workflow twice.
When you look at the extras-change documents you can see that the Header is changed twice, once for a system status and once for the user status. I am assuming that since there are 2 changes, this is what is doing both firings.
The funny thing is that if I fall into our custom code in debug where we are reading the status and event tables I only see bus2000120.changed.
Any ideas on how I might solve this problem? Do you believe I am correct in assuming that the 2 status changes to the header of the transaction is how both events are being fired? If not, any guidance you might give would be greatly appreciated.

see post stream, solved via sap note 1063138

Track user changes in customized transparent table

Greetings..
How do i to track user changes in my table ? is there any master table that keep track changes made by user on the specific field.? Is there possible if the table have the original and changed data.

i got the below explanation from other thread, which has explained by an expert, so, take it as reference and interprete according to ur req.
BEGIN
Table Events:
Go to SE11 and open your Ztable
click on the Table maintenance generator.
you can find the function group. right
Take the Function group name and go to Tcode SE37
and open the Function Group.
In the Status of the small window of the Function
group display
you can find out change requests , Main program and
Function group Docu tabs.
Click on Main program and create user defined Include.
check the sample code below
Click on main program
Create user defined include
User-defined Include-files (if necessary). *
INCLUDE LZPHIRF... " Subprograms
INCLUDE LZPHIRO... " PBO-Modules
INCLUDE LZPHIRI... " PAI-Modules
Create the below include.
INCLUDE LZPHIRI01. " PAI-Modules
Double click on the Include name. you have the below
code
Loop at Extract.
module liste_init_workarea.
chain.
field fild1
field fild2
field fild n
module set_update_flag on chain_request.
You have to add a new module here
check the below code
*----User defind module
Module user_defind_validation.
endchain.
Double click on module write code in that.
Include <Include Name> *
*& Module user_defind_validation
Module user_defind_validation.
Here you can write your own validations.
field2 = field1 /2.
field4 = field1 /4.
if field4 field3.
message.
endif.
EndModule. "user_defind_validation
Events allow you to change the generated table
maintenance dialog at predefined positions, which
cannot be reached by user modules in the screen flow
logic.
The user routines are called dynamically at runtime.
For this reason, the routines must be in a user include
in the table/view maintenance dialog function group.
All extended table maintenance global data is available.
An interface is only required for events 22 and AF.
The events can be additions or replacements.
Additional events
Event 01 before saving the data in the database
This event occurs before new, changed or deleted
entries are written to the database
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the
lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
END
thanq

API for access of guided procedure from ABAP / WebDyn: change/read status

Hallo together,
I'm very new to guided procedure and have some questions about possible interaction between WebDynpro ABAP and Portal guided procedures (UWL ?)
is it possible to access a guided procedure or their attributes from WebDynpro ABAP? What are the relevant key attributes (ID's) to do so?
Is is possible to change the status of a guided procedures f.e. from "completed" to "ready" from outside, let say WebDynpro ABAP? for the purpose of a monitor for mgrs.
- possible szenario is a manager says: "no, not well done" go back to start and do it again !
- another szenario: guided procedure is "running" and should be set to "completed"
Any hint will be helpfull
Thanx very much in advance
regards Hans

Hi Hans,
There is a good and a bad news regarding APIs for GP and ABAP Web Dynpro and GP:
The good news is that you can find [here|http://help.sap.com/javadocs/nwce/current/gp/index.html] the APIs for GP.
The bad news is that the cooperation capabilities between GP and ABAP Web Dynpro are restricted in a certain way. One can use a ABAP Web Dynpro in GP as callable object, but GP is only capable to transport parameter values from GP to the UI but not vice versa. In many cases one needs a solution where the ABAP Web Dynpro UI accepts user inputs and forwards them to the GP context. This is not supported.
Regards,
Jan

Migrating Local Users to Network/Mobile Home Directories

Hey Everyone!
A Happy Holiday's to you all! I'm in the midst of building a new system for my new clients. They had nothing but static IP numbers and no actual servers in a 50+ Mac environment. MacBook Pros, G5's and PowerBook G4s up the yang.
What I'm looking to do is migrate as seamlessly as possible, all of the existing local users to network users and then some of those network users will become mobile accounts. I have Open Directory authenticating properly so...
Here's my plan:
1) Finish creating new builds for the MacBook Pro's, the G5s, and the PowerBook G4s.
2) Create the users in OD and assign them to groups for permissions.
3) Drag and drop entire home directory from each computer to a shared folder on my OD Server.
From here I want to run chown, I'm guessing, to change the user:group for the home folders I copied over so that they match the ID's created by OD. I figure when I do that, then I can simply replace the OD created home folders in my server's Users folder with the copied and permission modified home directories from each local user.
My guess is that would be the fastest way to migrate the users to the network.
My question is are the terminal commands I need to run on each folder in order to make this as seamless as possible?
chown -R username:newgroupname /~path to copied local home directory
Is that syntax right?

The command is correct!!!
But my quess is if you use ACL's to set the permissions you won't need to run the command on every folder
Best Regards

Change the status of the notification center in iPhone programmatically or atleast read what the status is for a particular application

Is it possible to control and change the status of the notification center in iPhone for a particular application.
1)      In the application push notification is implemented.
2)      Once this application is installed we can see the app in the notification center.
3)      There is an option to ON or OFF
4)      In the application we need an option to check if the above option is ON or OFF.
5)      If the option is OFF we need to provide the user an alert stating that in the notification center has it option off and here we have to provide an option to user to switch ON the option at the notification center.

Well, I could find a fix for that.
My mistake was that 1: I wasn't getting the correct ntype code for my value list type. And 2: I wasn't giving the Id name.
The new result came as this:
statusObjRef = doc.getStatusRef();
statusHome = IBeanHomeLocator.lookup(session,statusObjRef);
status = statusHome.findUniqueByNameType("Drafting Agreement", 1);
doc.setStatusRef(status.getObjectReference());
In case anyone has this problem, you should check the collection of values internal id, that's the actual ntype code (the number you send on the second parameter).
But I could still use help having some advice on the Master Agreement elements handling (getting data from the master agreement or the data thas is being edited at the moment before saving).
If anyone could give some advice, they would be very welcome

Migrating a user changed her status

Similar Messages

Maybe you are looking for