Migrating an Oracle Forms 4.5 application from Windows Server 2000 to 2003

We are upgrading a number of servers from Windows Server 2000 to Windows Server 2003 (Standard Edition, R2). Can we re-install Forms 4.5 on 2003 and what is involved. If not, what can we do.
Kind regards,
Malcolm

Forms 4.5 has been desupported way before Windows 2003 was ever available. So, you can be sure that Forms 4.5 is not supported on Windows 2003. You could give it a try, but you could very well run into problems.

Similar Messages

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Using and synchronizing applications from Windows Server 2012 on local desktop

    I have Visual Studio 2010 on my remote server.  How do I use Visual Studio  software from the server on my local laptop and sync it with the server?

    Of course remote desktop assumes that the system is also properly licensed for Remote Desktop Connections.
    A little clarification on the OP's request might also be in order.
    "How do I use Visual Studio  software from the server on my local laptop and sync it with the server?"
     If you want to run VS on the server, using something like remote desktop services, it runs there and the data stays there.  Obviously you can redirect where VS will store data so that it stores data on your laptop, but then there is nothing to
    automatically synchronize it.  Maybe a more complete explanation of your issue would help.
    . : | : . : | : . tim

  • In place upgrade from Windows Server 2000 to Windows Server 2003 ADS

    Hi...is anyone aware of any issues with performing an in place upgrade from Windows 2000 Server to 2003 Server, which is currently running ESSBASE? Please advise, if you have any information. Thank you.

    You can post your question in ESSBase forum
    Essbase

  • Forms 4.5 Migration to Oracle Forms 10g

    Hi All,
    I want to know abt migration steps i.e. i 'm doing migration of Oracle Forms 4.5 to Oracle Forms 10g. Then existing forms is on Windows NT based environment and the database is Oracle 8.
    What is the better way to approach this issue? Whether, directly open the existing Forms into Oracle Forms 10g or first open the form into Forms 6i and then after 10g?
    Tell me the System Specification.... Database version.... Which Application Server is suitable.... And whether the Oracle 9i database possible for Forms 10g or not.
    Pls Give me solution.
    Thanks

    What is the better way to approach this issue?
    Whether, directly open the existing Forms into Oracle
    Forms 10g or first open the form into Forms 6i and
    then after 10g?As Grant said:
    4.5 to 10g (strictly speaking is not supported) but should work ok - Generally speaking you just open your Forms in the 10g builder and compile. You should check out otn.oracle.com/formsupgrade which gives you some good pointers including the Forms built-in procedures that have be desupported and removed from the product.
    4.5 -> 6i -> 10g was the supported route (but even 6i is desupported now).
    >
    Tell me the System Specification.... Database
    version.... Which Application Server is suitable....
    And whether the Oracle 9i database possible for Forms
    10g or not.OAS 10gR2, DB 9i is good.

  • Call Oracle forms using web application

    Hi,
    I am newbie for configuring oracle forms with web application.
    what are all the steps needs to be done for calling oracle forms 6i from web application.
    Thanks
    Raj

    In which case I would suggest you go to 10g or 11g of Forms since 6 is no longer supported.
    then check out
    http://www.oracle.com/technology/documentation/forms/index.html
    http://download.oracle.com/docs/cd/B25016_04/doc/dl/web/B14032_03/B14032_03.pdf
    http://otn.oracle.com/formsupgrade
    Its all documented here
    Regards
    Grant

  • How to Migrate my database from SQL Server 2000 to Oracle

    I want to transfer my database from SQL Server 2000 to Oracle, Can I do this without using Oracle Migration Workbench ??
    Please help me.
    Thanks in advance
    Vicky... :-)

    Do you have a good technical reason for not wanting to use the Migration Workbench?
    Given that it's free and does a hell of a lot of the work for you, why wouldn't you use it?
    Other than that, I would say you would be on your own...
    cheers,
    Anthony

  • Reg. Migrating data from SQL Server 2000 to Oracle

    Hi All,
    I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
    Could you guys find any tool for the same.
    Please do the needful.
    Thanks & Regards,
    Prathap

    hi dermot,
    it's very urgent now. Can you please give any solution for this.
    and also i tried the SQL developer tool. But i got an below error,
    Error starting at line 2 in command:
    CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:2 Column:45
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 3 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 4 in command:
    CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:4 Column:45
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 5 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 6 in command:
    CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    Error at Command Line:6 Column:49
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 7 in command:
    GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
    Error report:
    SQL Error: ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    *Cause:    An attempt was made to change the current username or password
    without the appropriate privilege. This error also occurs if
    attempting to install a database without the necessary operating
    system privileges.
    When Trusted Oracle is configure in DBMS MAC, this error may occur
    if the user was granted the necessary privilege at a higher label
    than the current login.
    *Action:   Ask the database administrator to perform the operation or grant
    the required privileges.
    For Trusted Oracle users getting this error although granted the
    the appropriate privilege at a higher label, ask the database
    administrator to regrant the privilege at the appropriate label.
    Error starting at line 8 in command:
    connect dbo_testdatalatest/dbo_testdatalatest;
    Error report:
    Connection Failed
    Commit
    Regards,
    Prathap.R

  • Best Way to Migrate an application from one server to another

    I couldn't seem to find the best way to this by Googling. If you have two instances of Sun Web Server 7, and you want to migrate a web application from one server to another, what is the best way to that?

    I am sorry. My question was poorly worded after some hours of frustration. What I am really trying to do is develop a base virtual machine snapshot with Sun Web Server Loaded and a base set of applications.
    When the need arises, I need to deploy another VM and start it up. There seems to be some issue with the host name of the VM and the administration server, or something. It is my impression that as longs as I have everything contained in one directory like /webserver, I should be able to copy everything to a new machine and start it up. I know I need the listeners listening on all ip addresses and the jdk being used would need to be in that directory as well. Is there anything I am missing here or that I need to watch out for?

  • How to access oracle R12 applications from windows client

    Hi All,
    I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
    Can any one help me accessing applications from windows client and unix box

    Hi;
    I installed R12 oracle applications on Linux through VMWare and every thing was fine now. My database listener, database and applications are up and running. I installed Java and Mozillla and established a soft link on LInux but was not able to access oracle applicaitons from Uniix box. I was seeing if i can do it from windows client. Mine is windows vista and i pinged the ipaddress and its connecting but was not able to access applications from windows client and also from linux.
    Can any one help me accessing applications from windows client and unix box1. Be sure you can ping your linux from your client
    2. Be sure your selinux and firewal disable on linux machine
    3. Add your IP and hostaname to your windows C:\WINDOWS\system32\drivers\etc\hosts file
    4. Add your url to your trusted site on windows
    5. Use IE7 or check below note to can use certified browswer and access EBS
    Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
    Regard
    Helios

  • Oracle Forms: Build Internet Applications correct configuration

    I want to study for the Oracle Forms: Build Internet application exam (IZ0-141) is this exam specified by oracle versions? Forms for 9i looks a little different that forms for 10g. If it is for 9i the download for Oracle9i Application Server is no longer available, neither is the database version. I want the setup a practice lab for the exam and I want to make sure I am using the correct configuration and that the exam is not go to refer to items that is no longer available.
    Thanks!

    Thanks for reply yogesh.
    Actually I am looking for some basic tutorial of Forms developer. I never use that before. I haven't found which tools/package I can use to create forms. where is OC4J located?
    what can OTN help on the preparing of IZ0- 141 exam? I found a course on Oracle website for that, But its price is $4,000 CDN, which I can't afford. I really want a book related to the course.
    Thanks,
    Robert

  • How to install oracle Forms and Report 10g in windows XP OS

    How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
    It is working good.
    please help me this issue.
    please give the steps..............
    Thanks
    Rajeev

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

  • How to manually completely remove a J2EE application from the server?

    Hello,
    I have created and deployed a certain test J2EE application.
    After I finished with it I wanted to remove it, yet I cannot do it: Any removal attempt, either by the SDM or Admin Tool, encounters exceptions and errors I cannot handle. I tried restarting the server, stopping the application yet nothing works. on telnet the application has always STOPPING ststus...
    Desperately, I have decided to manually remove this application from the server yet I don't know the steps.
    Can someone please give me a step-by-step guidance on how to completely remove this application from the server, so it won't appear anyome both at the SDM and at the deploy service of the WAS?
    Thank you in advance,
    Roy

    Hi Peter,
    I've reproduced the problem and created a thread dump. I believe these lines are the important ones:
    "SAPEngine_Application_Thread[impl:3]_10" prio=5 tid=0x080cc9d8 nid=0x18e0 in Object.wait() [8a8f000..8a8fdb8]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x14450d88> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.services.ejb.EJBAdmin.destroyContainers(EJBAdmin.java:1145)
         - locked <0x14450d88> (a java.lang.Object)
         at com.sap.engine.services.ejb.EJBAdmin.commitStop(EJBAdmin.java:2529)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commonCommitFinished(StopTransaction.java:262)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commitCommon(StopTransaction.java:305)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commit(StopTransaction.java:291)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:310)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
         at com.sap.engine.services.deploy.server.application.RemoveTransaction.begin(RemoveTransaction.java:133)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:903)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:5056)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:885)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Could you please advise how to proceed from here?
    Thank you in advance,
    Roy

  • Converting SQL statements from MS server 2000 to Oracle 10g

    We are moving over from MS server 2000 to Oracle 10g as our database for Peoplesoft system.
    There are several embedded SQL statements that I need to investigate to see what needs converting.
    So far I can see a need to convert the following:
    Dates.     GetDate() to ?
    Outer joins. *= to LEFT OUTER JOIN
    Has anyone else done a similar exercise and what other functions do I need to convert?
    Thanks.

    Hello
    A quick google search (http://www.google.co.uk/search?hl=en&q=ms+sql+server+oracle+differences&spell=1)
    came up with this:
    http://dba-oracle.com/oracle_news/2005_12_16_sql_syntax_differences.htm
    There's a quite a few more sites listed.
    HTH
    David

  • Import of the application from one server to another

    Hi There,
    I have imported my application from one server to another.
    Now when I am trying to log in to the application using the previous credentials, it simply reloads the log in page and it doesn't give invalid user name and password error also.
    It just simply load the log in page once again.
    What should I do? Where am I going wrong?
    Please help!!
    Thanks in advance
    Pushpesh Pallav.

    Hi,
    If you need previous login credentials to another application as new system. please follow the steps. in Application Express 4.1.0.00.32<br>
    <font color=red>IN OLD System</font>
    Home>Application Builder>Application [101]>Export / Import>Manage Export Repositoryexport Workspace to new system. once done this task u will have exported workspace copy.
    <br>
    <font color=red>IN NEW System</font>
    http://hq-orapp-03:7777/pls/apex/f?p=4550:10 *need apex admin credentials*
    Home>Manage Workspaces>Import Workspace> step I
           "        "                        step II Existing Workspaces || you can see your old development workspace and usersthese steps to be done! then you can import application and login credential can use which is previous application user name/password.
    Please if its correct and make it flag in this thread.
    Thanx,
    Ram

Maybe you are looking for