Migrating Crystal reports to Bi Ondemand reports

Can any one guide me in detail  in handling the below requirement
The idea is to convert reports from Crystal report
(using SQL Server as a data source) to SAP BI OnDemand report
(using Salesforce objects as a data source).
There is another project that is taking care of migrating the data from SQL Server to Salesforce
(along with other functionalities).

Hello,
bi.ondemand.com uses Crystal Reports - it does not have its own type of reports.
So if you already have rpt files that use sql server, it should just be a matter of changing the datasource to use salesforce.com using the database expert inside the crytal reports designer.
Changing from sql server to salesforce.com is likely quite a large change though so I am not sure the database expert will be able to help you.  You may need to re-write the reports.
Sorry I couldn't be of more help.
Steve

Similar Messages

  • Migrating reports from MS SQL reporting services to BO(Crystal reports)

    Hi Folks,
    I am looking to migrate my existing reporting application to BOXI and crystal reportsXI. The current reports application is build on Microsoft SQL reporting services platform. I have thousands of reports in the application and am looking for a solution to migrate all these existing reports into BO compatible format, i.e., .rpt format.
    Anyone with previous experience of this kind of migration/conversion for suggestions on the quickest and most cost effective solution.
    I do not want to be developing all the reports again on BO.
    Appreciate any kind of assistance on this.
    Thanks,
    Shetty.

    Hi Tim,
    Thanks for the reply.
    I searched the forum and found the link to [url|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/URLreporting_new.html] which specifies the process to use URL Reporting for Crystal Reports . But to implement this we have to change the architecture of our existing application as presently we are directly accessing the report in URL to run the report. I was not able to found any solution that implements this architecture.
    Does Business Object Enterprise 11.5 still supports this architecture?
    If we use the architecture specified in the above URL for URL Reporting for Crystal Reports  then how we can migrate all our reports to BOE 11.5? We have to use the Publish Wizard for that, to get the ids for our reports?
    There was a parameter APSTOKEN how can we get a token. Can it be a static token that can be used by all the users to access the reports?
    Thanks!

  • Migrating crystal reports XI to crystal reports 2008

    Hi,
    Currently we are using crystal Reports XI for our reporting.
    Planning to migrate to Crystal Reports 2008.
    Do we need to change all reports ,which are developed in Cr Rep XI.
    Thanks in advance
    Regards
    Ravi

    The source of the problem is the "re-import when opening" option on the sub-report - if I remove the tick, the report is saved to the repository and the program does not crash. Is this a known issue, or is there some restriction in 2008 which did not exist in XI that I am not aware of. I did download Crystal reports 2008 SP2 but I have not installed as the notes say it is not compatable with Server 2008 SP1.
    I have the follow versions installed...
    Crystal Reports 2008: 12.1.0.892
    Crystal Server 2008: 12.1.0
    CMS database is on SQL Server 10.0.2531
    Tks
    Garth

  • Look and feel discrepency after migrating Crystal Reports from XIR2 to XIR3

    Hi,
    We are migrating Crystal Reports from XIR2 to XIR3. If the report is designed in Crystal client by inserting a subreport it does not come well in web viewer(Infoview). If I do not use subreports then the view is same (both in web viewer & windows client preview).
    Could you please let me know, what could be the problem and how to resolve this?
    Your valuable time and solution is much appreciated.
    Thanks in advance.
    Mohan

    Hello,
    What happen if you use the web java viewer instead of web viewer? (you can change it in the preferences options)
    Otherwise, when you say "it does not come well", what do you mean?
    Thanks
    Philippe

  • Trouble migrating Crystal Reports Custom Functions from BOXI R2 to BOXI 3.1

    I can't seem to migrate the custom functions from the custom function repository in my R2 environment to the 3.1 with FP 1.3 environment.
    When I migrate Crystal Reports using the Import Wizard, they all come over and they retain their custom functions, however, they don't bring over or create a new custom function repository. 
    When I do run the import wizard I have selected the repository radio button, but it does not have any affect .
    How can I migrate all of these custom functions without having to manually open up reports and placing them back into the repository on the new server?
    Thanks,
    Randy

    Hi,
    so if they are published to Rel.2 this looks different.
    Just to clarify it a bit more...these Files are no Datasources for Reports and Universes and your Users dont consume them via InfoView?!
    Whats the purpose for these Files? If they have none, you can de- select them in the UMT and dont migrate them (or better said move them cause you wont actually migrate .csv files). But if nobody touches them, you can move them with the UMT during daily business...how long it will take i cant estimate it. But 65GB for .CSV files is a huge amount.
    But you are correct, to move them from Rel.2 to BI4 you have to use the UMT.
    If you have the ressources and time i would recommend the following (Thats what i usually do with my customers):
    1. Setup a Machine (could be a VM) with the same OS and BOE Version (included SPs and FPs) as your production Rel.2
    2. Schedule a half day or day Downtime to copy the content 1:1 from the production Rel.2 to the VM Rel.2 with the IW or CMS DB Copy. Or do this after Business Hours.
    - With this Size of your FileStore i would recommend the CMS DB copy way.
    - Now you have a 1:1 Testing Environment of your Production Environment
    3. Use the UMT to migrate from your VM Rel.2 to your BI4 installation
    - Here you can see how long it takes
    - You can check if the UMT is capable for this 65GB transfer
    - Can sort out other possible issues
    - Do some other Testing
    After you did that you have a perfect estimation on how long the Migration will take and what for issues you are facing. With this information you can decide if you need a downtime or can do it after Business Hours f.e.
    Regards
    -Seb.

  • View discrepency while migrating Crystal Reports from XIR2 to XIR3

    Hi,
    We are migrating Crystal Reports from XIR2 to XIR3. If the report is designed in Crystal client by inserting a subreport it does not come well in web viewer. If I do not use subreports then the view is same (both in web viewer & windows client preview).
    Could you please let me know, what could be the problem and how to resolve this?
    It's urgent. Your valuable time and solution is much appreciated.

    I moved your thread to the " .NET - SAP Crystal Reports" forum, assuming this is in a .NET app(?)
    Unfortunately, the description:
    " does not come well in web viewer"
    is somewhat "loose". Perhaps inserting a link to a screenshot(s) that demo the issue will be a good idea?
    Also, if my assumption is correct:
    1) What version of .NET?
    2) What is the exact version of CR? (In CR designer go to Help | About)
    3) What browser?
    4) Does this work on you dev system?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • The migrated Crystal Report throws "The database logon information for this report is either incomplete or incorrect" error

    [ENVIRONMENT]
    Product version - BI4.1 SP03
    OS - Windows 2008 R2
    CMS Database - Oracle 11g
    Java Application Server - Tomcat7
    [ISSUE]
    Using the Upgrade Management Tool to completely migrate a BOXI3.1 SP3+FP3.6 to BI4.1 SP03.  The reporting database from both BOXI3.1 and BI4.1 are the same and so is the database logon credential.
    When viewing and refresh a migrated Crystal Report, it throws "The viewer could not process an event. The database logon information for this report is either incomplete or incorrect. [] ---- Error code:0 [CRWEB00000119]" error in both BI Launchpad and "The database logon information for this report is either incomplete or incorrect" in scheduled job.
    [STEPS TAKEN]
    - Update the Database Configuration with the SAME Oracle database password in CMC and "The database logon information for this report is either incomplete or incorrect" issue goes away.
    I search the SAP SMP and SCN forum and found no reference on this UMT and Crystal Report database logon problem.  Hope any of you have seen this problem and share if there is an ADAPT for it.
    Thank you in advance,
    Jin-Chong

    Hi,
    The BI4.1 SP03 server and client and Crystal Report 2013 SP03 developer and Crystal Report for Enterprise 4.1 SP03 are all installed onto this Windows 2008 R2 server.
    I am able to open the migrated report from CMS repository in Crystal Report 2013 SP03 developer and am able to refresh it with database logon password provided.  After save it back to the Enterprise, the database logon password field for this report in CMC becomes empty so that I have to enter the database password and choose "Use same database logon as when report is run" when viewing and scheduling report.
    What is interesting to me is that the UMT seems to migrate the report along the database logon password because I can see the encrypted password in the report database logon property in CMC.  The workaround is to reenter the database logon password in the report database logon property in CMC.
    With this said, there are hundreds of the Crystal reports and the workaround would consume lots of manual work by update each report's database logon password in CMC.
    For other customers who have more crystal reports, I wonder if there is an automated way to update the crystal report's database logon password on BI4.1 or if this is an isolated incident on my new BI4.1 SP03 environment.
    I run UMT in command line to perform livetolive migration, and my steps are listed below
    cd "E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\apps\upgradeManagementTool\jars\"
    "E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\bin\javaw.exe" -Xmx56g -Djava.library.path="..\..\..\..\win64_x64" -jar upgrademanagementtool.jar -internal_use_only_noversioncheck -responsefile LIVETOLIVEResponseFile.txt
    LIVETOLIVEResponseFile.txt:
    mode=livetolive
    source=edhc01nwapp65:6400
    sourceusername=Administrator
    sourcepassword=xxxxxxxxxx
    destination=WAPP246N:6400
    destinationusername=Administrator
    destinationpassword=xxxxxxxxxx
    logfile=E:\temp\livetolive.csv
    configparam:base_url=https://boprod.bsc.bscal.com/dswsbobje
    locale=en_US
    Regards,
    Jin-Chong

  • Migrating Crystal and Webi Reports with Universe from 1 folder to different folders

    Hi There
    Does anybody know of a way to do the following
    this is for BOE XI 3.1 SP 6 FP 6.2 on Windows 2008 R2
    We have multiple Crystal and Webi reports developed from 1 universe and we need to copy these Crystal and Webi  reports to different folders in the same CMS  for example
    Universe Dev > Universe Folder Dev -  Crystal and Webi Reports set in Dev Folder
    Create a copy of the Dev Universe to Universe Folder Test – Copy the Dev Crystal and Webi Reports to Folder Test we need to Map it to the universe in the Test Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder UAT– Copy the Dev Crystal and Webi Reports to Folder UAT we need to Map it to the universe in the UAT Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder PROD – Copy the Dev Crystal and Webi Reports to Folder PROD we need to Map it to the universe in the PROD Universe folder(Copy of the Dev Universe)
    The reason for this is each of these universe are connected to a different database i.e Test, UAT, Prod and we have over 200 reports and at the moment we have to manually map each report to the new universe individual which take up hours.
    I have tried Lifecycle manager but came to the conclusion it cannot achive this
    You cannot change the universe attached to the Crystal and Webi reports
    you cannot promote Reports and Universes in the Same CMS to different folders
    you cannot change the folder even if you promote jobs between servers
    Does anybody know of a way to do this

    Hi,
    The way you should do this is to have 4 different BO systems, Dev, Test, UAT and Prod.
    Having this will allow you to use the same universe across all systems, but the connection to the database will be different on each system.
    Not only will this allow you to smoothly report off different data sources, but you will also be able to upgrade and make configuration changes without impacting your production system.
    Cheers,
    Josh

  • Problems starting Crystal Reports Page Server and Report Application Server

    Hi,
    We have migrated to a new server and I have re-installed our Crystal Reports Server XI R1.
    It is being installed on a Windows 2003 SBS Premium Server with MSSQL 2005 Workstation Edition
    I have been told that I need to start the following Crystal services after installation.
    1) Crystal Reports Page Server
    2) Report Application Server
    These services simply wont start
    When I try to start Crystal Reports Page Server, I get a Visual Studio Just-In-Time Debugger window that says...
    An unhandled Win32 exception occured in pageserver.exe [14892], subsequently, another window pops up [svrmgr] that says
    "The service did not respond to the start or control request in a timely fashion"
    Also, when I try to start the Report Application Server, I get another VS JIT debugger window that says
    An unhandled win32 exception occurred in crystalras.exe [12748]
    I also get the same SvcMgr Window that says..."The service did not respond to the start or control request in a timely fashion"
    Thanks all
    Paul

    Hello Paul,
    I recommend to post this question to [the dedicated BusinessObjects Enterprise Administration forum|BI Platform;.
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Thanks
    Falk

  • Migration of BO 6.5.1 reports to BO XI

    Currently running BO 6.5.1. Will be upgrading to BO XI at some point. The only issue I have at the moment is the migration of the existing reports. Some reports are stored in the corporate repository which is viewable from the BO Supervisor module but the majority of the reports (supposedly 100's of them) are either stored on Shared drives on servers or on personal drives allocated to each user.
    Users tend to save their reports on a shared drive on a server that is accessible by other users in their own dept and also create their own reports and save on their designated personal drive.
    Is it correct that the only way to migrate the reports on the shared drives and personal drives is to consolidate and publish them all into the BO 6.5.1 repository and then migrate to XI or can the reports remain as they are on the drives.
    Once the migration to XI has taken place, version 6.5.1 will run in parallel although maybe only for 3 months before this is switched off. The existing 6.5.1 universes will be migrated to XI and any new universes that are downloaded will sit on top of this on the new version.
    What options are available in terms of the report migration as any help would be much appreciated?

    Hello dipen143,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Reuse Crystal report Viewer For different reports - unload cache

    So I am migrating from crystal reports basic to crystal reports 2008. I have hit a stumbling block. Rather than have a new page and report viewer for each report I decided it would be easier to have one report viewer and send to it in session variables the report I wish to run and appropriate parameters. This seemed to work fine in CR basic.
    Now I have upgraded the viewer works fine for the first report I run however it then caches this report and doesn't seem to clear it down, if the new report has different parameters I will get a parameter error. If I run a report requiring the same parameters I will get the original report not an updated one.
    I believe I need to leave the CrystalReportSource cache on in order to page the report (correct me if I am wrong)
    I have taken a few snippets of code, is this possibly running too late in page life cycle have I missed something or is there a way to force a cache clear:
    protected override void OnLoad(EventArgs e) {
    //setup report in viewer with correct db logon
                    CrystalRepSource.Report.FileName = report;
                    SetupLogonInfo(CrystalRepSource);
                    //add parameters
                    AddParam(paramFields, pfItem1, dcItem1, "@year", year);
                    AddParam(paramFields, pfItem2, dcItem2, "@school", school);
                    AddParam(paramFields, pfItem3, dcItem3, "@division", division);
                    AddParam(paramFields, pfItem4, dcItem4, "@progArea", progArea);
                    AddParam(paramFields, pfItem5, dcItem5, "@type", SessionHandler.record_type);
                    AddParam(paramFields, pfItem6, dcItem6, "@filterText", "School = \'" + school +
                                                            "\' Division = \'" + division
                                                            + "\' Programme Area = \'" + progArea
                                                            + "\' Record Type = \'" + SessionHandler.record_type_text + "\'");
    CrystalViewer.ParameterFieldInfo = paramFields;
    private void SetupLogonInfo(CrystalReportSource CrystalRepSource)
            TableLogOnInfo logOnInfo = new TableLogOnInfo();
            logOnInfo = CrystalRepSource.ReportDocument.Database.Tables[0].LogOnInfo;
            ConnectionInfo connectionInfo = new ConnectionInfo();
            connectionInfo = logOnInfo.ConnectionInfo;
            connectionInfo.DatabaseName = Application["db"].ToString();
            connectionInfo.ServerName = Application["server"].ToString();
            connectionInfo.Password = Application["pass"].ToString();
            connectionInfo.UserID = Application["user"].ToString();
            CrystalRepSource.ReportDocument.Database.Tables[0].ApplyLogOnInfo(logOnInfo);
        private void AddParam(ParameterFields paramFields, ParameterField pfItem, ParameterDiscreteValue dcItem, string fieldName, string value)
            pfItem.ParameterFieldName = fieldName;
            dcItem.Value = value;
            pfItem.CurrentValues.Add(dcItem);
            paramFields.Add(pfItem);

    ok so I have tried changing the code to:
    CrystalRepSource.ReportDocument.SetParameterValue("@year", year);
                    CrystalRepSource.ReportDocument.SetParameterValue("@school", school);
                    CrystalRepSource.ReportDocument.SetParameterValue("@division", division);
                    CrystalRepSource.ReportDocument.SetParameterValue("@progArea", progArea);
                    CrystalRepSource.ReportDocument.SetParameterValue("@type", SessionHandler.record_type);
                    CrystalRepSource.ReportDocument.SetParameterValue("@filterText", "School = \'" + school +
                                                            "\' Division = \'" + division
                                                            + "\' Programme Area = \'" + progArea
                                                            + "\' Record Type = \'" + SessionHandler.record_type_text + "\'");
    private void Page_Unload(object sender, EventArgs e)
            try
                    CrystalRepSource.Report.DataSources.Clear();
                    CrystalRepSource.Report.Parameters.Clear();
                    //CrystalRepSource.ReportDocument.Close();
                    //CrystalRepSource.ReportDocument.Dispose();
                    CrystalRepSource.Dispose();
                    CrystalViewer.Dispose();
                    GC.Collect();
            catch { }
    I experimented with various bits in the page unload as you can see I have commented a bit out at present as it was throwing an exception. The SetParametersValue while handy (will clean the code up a bit) didn't make any difference I am still getting the same issue.

  • Crystal Report Hyperlink to Sub-report or other report

    Hi,
    I would like to create a report on which the first part will show project summary page. The second part will have all project detail pages and third part with all project financial informations.
    The report should work in such a way whenever user clicks on any project at first summary page this has to jump to corresponding detail page of projects.
    I have the following question regarding design of this report.
    1. Do I need to create a saparate report as a sub report and then merge with main report in a footer section? Or is it ok to create sub-report within main report through sub-report wizard option?
    2. How can I establish hyperlink between the pages i.e. summary to detail pages?
    3. back hyperlink to first pages.
    I am expecting more information about hyperlink options within Crystal report.
    Thanks
    -Sunil Prasad

    Hi Sunil
    - For your first question: . Do I need to create a saparate report as a sub report and then merge with main report in a footer section? Or is it ok to create sub-report within main report through sub-report wizard option?
    You can create a separate report and then insert it as a subreport in the main report or create it with sub report wizard.
    Once you click on Insert -> Subreport, you can see there are two options, one is to point to an existing report and another is to create it through wizard.
    - 2. How can I establish hyperlink between the pages i.e. summary to detail pages?
    You can use the hyperlink between report objects.  Also you can apply a customized formula for this.
    Check the below SAP Notes:
    [1. 1207011 - How to create an OpenDocument link in Crystal Reports XI/XIR2 |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes]
    [2. 1212849 - How to pass a parameter value through a hyperlink from one report to another |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    For detailed information on Hyperlink Click on Crystal Reports Help Help -> Search for the keyword Hyperlink.
    You can also refer to the Crystal Reports User guide for the respective version that you are using.
    Hope this helps!!
    Regards
    Sourashree

  • Crystal Report and Dash Board Report templates

    Hi All,
    I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
    This in order to give demo to customers.
    Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
    Regards,
    Aditya

    Hi Adit,
    For CR demo, you can use this youtube CR demo:
    http://www.youtube.com/watch?v=bKLtTDNpQMM
    For the CR sample templates donwload, you can check this link:
    http://scn.sap.com/thread/1239521
    If  you want to create the template by your self, you can check this link:
    http://scn.sap.com/thread/1627677
    For dashboard sample, you can download from this link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
    JimM

  • Crystal 6.0 : How to hide the Page footer and Page Header of the Main Report on the Sub report.

    Post Author: pranay
    CA Forum: Crystal Reports
    Hi ,
    I have a Main report and a Sub report .  When a subreport spans across multiple pages , the page header and page footer of the main report gets displayed along with it . I want to hide the Page Footer and Page Header of the main report when a sub report is displayed . Is there any way it could be acheived in Crystal Report 6.0.

    I am assuming you are talking about the JSControl dropdown menu navigation. The easiest way to hide Community pages is to disable the Below Banner View for that navigation scheme, although it also disables the Subcommunties, Related Communities and Go up to Parent Community links. If you still want these in below the banner menu you could not display Community Pages in the "In this Community" tab and only leave the "Community Members and Knowledge Directly" link in there.
    You would think that it would be better to remove the "In this Community" tab althogether but it is tricky to remove it due to the fact that there needs to be a default horizontal menu displayed all the time. Not all Communities will have a Subcommunities or Related Communities tab so these communities would not display any below banner menus at all if there is no "In this Community" tab, which could be confusing.

  • Report containing 15 sub reports crashing - Crystal Reports 2008

    I am using Crystal report 2008 with all latest service packs applied. I have more then 20 different reports wich work absolutely fine and never crash. One of my report contains 15 sub reports since its bringing data from 15 different queries. This consistently keeps crashing everytime I try to run it. Not sure what could be the root cause.
    We are using Postgres database and connected to it with  ODBC connection using Microsoft DSN.
    - All Subreport data is being displayed on Report Footer
    - All subreports are included in the Main report  page header section. (I have also tried doing it on report footer section but it still crashes)
    I have tried searching through the forum and did not find similar issue resolutions. Did someone face similar problems before?
    The crash message is:
    "crw32.exe has encountered a problem and needs to close. We are sorry of the inconvenience."
    Error report contains this data:
    AppName: crw32.exe      AppVer: 12.2.0.290      ModName: psqlodbc35w.dll
    ModVer: 9.0.2.0      Offset: 0004c538
    I am using Windows XP
    Crystal Report Version Details:
    CR Developer Version 12.2.0.290
    Product Type: Full
    Let me know how can I debug this issue? Any help is appreciated.

    @Don - We performed extensive testing for this crash issue and found that now this crash is not happening only in one scenario. So we have partially fixed this.
    Now the report crashes if I get disconnected from database and reconnect. This is what happens
    1. open the report in crystal report 2008
    2. try to run the report when db is connected- it works fine.
    3. Now disconnect the database (we are using ssh tunnel to connect to db so we just close the tunnel)
    4. now try to refresh the report - it fails to retrieve data.
    5. Now close the report without saving it.
    6. Now Close Crystal Report.
    7. Now Connect the DB using ssh tunnel so crystal report can connect.
    8. Now open Crystal Report
    9. Launch the target report.
    10 Preview the report - it works for first time.
    11. Now do a refresh keeping same parameters - Report crashes here.
    - I tried these steps with some of my other reports and they do not crash.
    - Now I have only one report which contains a Postgres Query with date range,order by and a union join.
    - No subreports now - I am trying to run this one subreport as a standalone report which I created from scratch(using blank report wizard) and just copied the query.
    Any more pointers would help.

Maybe you are looking for

  • Help me with my survy

    I am doing this survy for my professor- I am at Bethedsa community college. (Currently, our JVM runs about 400% faster than commercial JVM, so this is definitely in research stage. ) I will appreciate your response- I need to get 20-30 responses- bef

  • LSMW - Periodic Data Transfer - wildcards in filename

    Hello, I have the following problem: The file, which has to be periodically read in is specifed for identification date + time e.g. DATAFILE_200820071250.txt In the step 'Specifiy Files ' I entered: serverDATAFILE_*.txt. In the step ' Frame Program f

  • Still no column break in illustrator?

    Seems odd this feature is still missing if it indeed is: Re: Column Break in Illustrator CS5

  • Feature Request: Color code lightroom folders

    I have several hundred folders inside of lightroom. I would like to colorcode "favorite" folders to make them easier to find when moving imported photos from "Dated" folders into subject specific folders. Seems like this should be easy, Or is there a

  • Clear info off Power Mac G4 to sell

    Wanting to sell my G4. How do I clear all my files and software off?