Migrating data between two portal servers - same version

I recently set up a new host to replace our existing Portal 6.0. Both hosts are running Solaris 9 and Portal 6.0. Right now, both hosts are up and running. Are there any docs on copying, or migrating the data from the old host to the new?
I want to make sure we get all relevant information including user info, user settings and desktop layout etc. We are using the sample desktop that comes with Portal 6.0.
I was wondering if I could accomplish this by backing up the LDAP database and restoring it on the new server. The only problem with this is there may be embedded references to the original server name and that would hose the new server.
Any ideas on how the best accomplish this task?

Hi to all,
Client side eventing can be used when my both portal components are on same page , but here my portal components are not on same page to be more precise , i wanted to share a parameter between logon module and mast head component , so
basically when use enters user name and password
at that time my logon module is called and now after authentication , we get into the applications on top of which mast head component is present .
In this case how to share the parameter  ??
Regard
Govardan

Similar Messages

  • Compare data between two tables of same schema

    Folks,
    I have one very intresting query which i would like to share with you all and looking forward for the solution asap.
    Scenario
    I have two table say TableA and TableB, both having same structre say as below
    TableA
    Col1 Var(10)
    Col2  INT
    TableB
    Col1 Var(10)
    Col2  INT
    I want to compare data between these two tables and store compared data into third table, let me expalin the whole scenario.
    TableA
    ColA          ColB
    INDIA          1
    PAKistan      2
    TableB
    ColA          ColB
    INDIA          1
    PAK             3
    I want result like
    Difference
    ColA          ColB
    True            0
    False           -1
    I want to store this difference in thrid table.
    i.e. when comparing text, i need TRUE when compare 100% else False, Caption is not considered.
         When comparing numeric value, simple sub is requried , TableA-TableB
    Note - I dont want to use any external tool to compare the table data, i required sql query to do the same.
    Thanks
    Amit Srivastava
    Amit
    Please mark as answer if helpful
    http://fascinatingsql.wordpress.com/

    Whereas the abbreviation of countries that exist in Table2 table are the first three letters of the name of the country*, here's a suggestion:
    -- code #1 v2
    INSERT into [Difference] (Col1, Col2, ACol1, BCol1)
    SELECT case when A.Col1 = B.Col1 then 'true' else 'false' end,
    (IsNull(A.Col2, 0) - IsNull(B.Col2, 0)), A.Col1, B.Col1
    from TableA as A full outer join
    TableB as B on (A.Col1 = B.Col1
    or Left(A.Col1, 3) = B.Col1);
    Is the COLLATE database case insensitive? If not, the code #1 above will have to be modified, using the upper () function or using COLLATE case insensitive in A.Col1 and B.Col1 columns.
    But if the abbreviation of the country follow the
    ISO 3166-1 alpha-3 standard, will require a fourth table containing the symbol and name of countries.
    -- code #2 v2
    ;with
    TableB_2 as (
    SELECT case when Len(Col1) = 3
    then (SELECT Country_name from [ISO 3166-1 a3] where Cod = Col1)
    else Col1 end as Col1, Col2
    from TableB
    INSERT into [Difference] (Col1, Col2, ACol1, BCol1)
    SELECT case when A.Col1 = B.Col1 then 'true' else 'false' end,
    (IsNull(A.Col2, 0) - IsNull(B.Col2, 0)), A.Col1, B.Col1
    from TableA as A full outer join
    TableB_2 as B on A.Col1 = B.Col1;
    Structure and data to test:
    use tempdb;
    CREATE TABLE TableA (Col1 varchar(10), Col2 int);
    CREATE TABLE TableB (Col1 varchar(10), Col2 int);
    CREATE TABLE [Difference] (Col1 varchar(10), Col2 int, ACol1 varchar(10), BCol1 varchar(10));
    INSERT into TableA values ('INDIA', 1), ('PAKistan', 2), ('China', 12);
    INSERT into TableB values ('INDIA', 1), ('PAK', 3), ('Bhutan', 3);
    go
    CREATE TABLE [ISO 3166-1 a3] (Cod char(3) primary key, [Country_name] varchar(30));
    INSERT into [ISO 3166-1 a3] values
    ('IND', 'India'), ('PAK', 'Pakistan'), ('CHN', 'China'), ('BGD', 'Bangladesh'),
    ('BTN', 'Bhutan'), ('MMR', 'Myanmar'), ('NPL', 'Nepal');
    go
    (*) If the short form of the country name using the first three letters of the country name,
    false positives can occur. For example,
    Mali and Malta or
    Angola and Anguilla.
    José Diz     Belo Horizonte, MG - Brasil

  • Transferring data between two production servers

    HI All,
    I have read weblogs in transferring scenarios from Dev to Qual to Prod.
    But I have a different requirement in which I have to transfer data from one production server to another production server without distrubing the first production server.
    Say A and B are two production servers, I wanted to transfer data from A to B on daily basis.
    Please give me some ideas on this....
    Thanks
    Veni

    Hello,
    I would suggest to use IDOC for transferring data (master \ transaction ) ... to do that you need to setup logical system (prod b) and RFC connection to connect to system prod b ...
    Also distributional model need to setup for pushing the outbound idoc into RFC connection through receiver port.
    Thanks
    Krish

  • Export mailbox Data between two exchange servers

    HI All,
      We are merging to a another company and looking for best options to migrate mailboxes?
    AS

    You can transfer your Exchange mailbox data (including email, calendar, contacts, tasks, and notes) from your old Exchange account to a new Exchange account. you will need to export data from your old account, remove the old account, add the new account,
    and then import the data into your new account.
    The above reference looks a good start-up for you.
    However, if you wish to achieve this goal automatically, you may also checkout this automated solution (http://www.exchangemailboxmigration.com/) to get this job done in more hassle-free manner without
    any issue.

  • Migrating Data Between Two MacBook Airs

    Hello All,
    I am getting the new MacBook Air today (Mid 2012).
    I currently have the Late 2010 11" MBA.
    I have a WD NAS for documents, photos, videos, and other content.
    I also have a Time Machine backup on a USB external hard drive.
    I'd like to get the pros' recommendation when setting up the new MBA and migrating my data. I would prefer not to do a full restore from TM backup so as not to transfer (if any) bad files into the fresh OS. With that said, I really would like to to start from scratch. I am not too worried about documents because I use both the cloud and my NAS to permanently store most files. However, my dilemma is with installed applications and all my current settings. I have applications that were not installed via the Mac App Store and those, including their settings and licenses, I would like transferred to the new MBA. Actually, even the installed apps from the MAS, I'd like to keep the settings.
    If restoring from TM backup is the only or best way, I won't oppose doing that too.
    Everybody's expert advise will be very appreciated.

    Congrats on your new Air!!  When the new air first starts, setup assistant allows you to migrate from the TM backup.  The is some granularity so it not really a "full restore".   Pondini has a great site on this issue an more.
    Here's the Migration link:
    http://pondini.org/OSX/Setup.html

  • How to Integrate real time data between 2 database servers

    How to Integrate real time data between 2 database servers
    May 31, 2006 2:45 AM
    I have a scenario where the data base (DB2 400) is maintained by AS 400 application and my new website application based on j2ee platform access the same database also but the performance is very low. So we have thought of introducing new oracle data base which will be accessed by j2ee application and all the data from db 400 database will be replicate to oracle data base. In that scenario the only problem is of real time data exchange between 2 databases. How do we achieve that considering both the application As400 and j2ee website application are running in parallel and accessing the same information lying on DB2 400 database. We have to look at transaction management also.
    Thanks
    Panky
    DrClap
    Posts:25,835
    Registered: 4/30/99 Re: How to Integrate real time data between 2 database servers
    May 31, 2006 11:16 AM (reply 1 of 2)
    You certainly wouldn't use XML for this.
    The process you're looking for is called "replication". Ask your database experts about it.
    I predict that after you spend all the money to install Oracle and hire consultants to make it replicate the DB2/400 database, your performance problem will be worse.
    panks
    Posts:1
    Registered: 5/31/06 Re: How to Integrate real time data between 2 database servers
    May 31, 2006 11:55 PM (reply 2 of 2)
    Yeajh I now that its not a XML solution.
    Replication is one of the option but AS400 application which uses DB2/400 DB is highly loaded and proposed website also uses the same database for retrieval and updation purpose.All the inventory is maintained in the DB2/400 database so I have thought of introducing new oracle database which will be accessed by new website and it will have all the relevant tables structure along with data from DB2/400 application. Now whenever there is a order placement from new website then first it should update the oracle database and then this data shuold also migrate to db2/400 application at real time so that the main inventory which is lying on db2/400 should be updated on real time basis because order placement is aslo possible from As400 application. So the user from As400 application should not get the wrong data.
    Is it possible to use MQ products??
    -Panky

    Hi,
    the answer to your question is not easy. Synchronization or integration or replication data between 2 (or more) database servers is very complicated task, even though it doesn't look like.
    Firstly I would recommend to create good analysis regarding data flow.
    Important things are:
    1) what is primary side for data creation. In other words on which side - DB2 or Oracle - are primary data (they are created here) and on which side are secondary data (just copies)
    2) on which side are data changed - only in DB2 side or only on Oracle side or on both sides
    3) Are there data which are changed on both side concurrently? If so how should be conflicts solved?
    4) What does it mean "real time"? Is it up to 1 ms or 1s or 1 min or 1 hour?
    5) What should be done when replication will not work? I mean replication crash etc.
    BTW. The word "change" above means INSERT, UPDATE, DELETE commands.
    Analysis should be done for every column in every table. When analysis is ready you can select the best system for your solution (Oracle replication, Sybase replication server, MQ, EJB or your proprietary solution). Without analysis it will be IMHO gunshot into the dark.

  • Intervals, synchronize the data between two oracle tables located in diffe

    Hi Experts,
    Is there any way I can, at set intervals, synchronize the data between two oracle tables located in different servers? What is the software, if there is any? If there are steps I can follow, so much the better.
    Thanks!

    I'm not sure what you want to achieve here...
    I want to synchronize both the Servers , so that it can update HO servers as well as Factory Server with the complete data. Could you please elaborate a little bit more; basing on your description I could also tell you how to setup timesync for those two servers if I understand "complete data" as the current date and time...
    Also a lot of solutions are platform and version specific so it would help if you could indicate OS and Database Versions (4 digit).
    And I still fail to see what this has to do with forms. You might want to post your question to the Database General forum: General Database Discussions
    cheers

  • How can I share data between two forms on different lists

    Using a custom content type, I created two lists that I want to share the same data - one is a calendar.  Our employees complete a form from the "Out of Office Request" list that has workflow functionality that sends an email to that person's
    manager.  If the manager approves the request, the item automatically populates the "Out of Office Calendar."  The problem is that the only information from the request list that populates the calendar is the Title field and date/time fields. 
    I need the manager name in order to create a view for each manager.  
    How can I connect the other information in the request list to the calendar list.  It seems to me that if the title and date fields carry over the information, there should be a way to connect the other information.  I'm using Designer.
    I've tried to connect the two lists' webparts with the wizard, but when I get to the page that maps the two lists, there are no column names and the "Next >" button is grayed out.  This seems like the logical place to connect the two lists,
    but it isn't working.

    Hi,
    According to your post, my understanding is that you wanted share data between two forms on different lists.
    To show external  information on the calendar event, there are two methods: Calculated column, workflow. You can refer to:
    A Simple Guide to Show More Information on a Calendar Event
    I recommend to use workflow to achieve what you want. But you need to create a people column to display the manager.
    You can create a workflow associated to the "Out of Office Request" list, add action to Start Approve Process. If the manager approves the request, you can create a item in the calendar, and then update the people column and the title column.
    Then the calendar will display the Title, date/time and the manager.
    To create a view for each manager, you need to modify the Filter. You can use the people column is equal to the manager name or the Title contains the manager name.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Different ways to copy data between two schemas in one instance

    Hi there,
    I am searching a good way to copy data between two schemas in the same instance.
    Both schemas have an identical structure such as triggers, tables, views and so on. The only difference is the purpose: one is the productivity system and one is for development.
    I looked at datapump but I do not explicit want to export / import. I want to keep the data in the productivity schema as well as copy it to the other schema. Any ideas? I found out there is a copy statement but I dont't know how that works.
    Thank you so far,
    Jörn

    Thank you for your replies!
    I also thought of creating a second instance for development and move the dev - schema to it. I just don't know whether our server can handle both (performance?). Anyway the idea is to have a possibility to quickly rebuild the data inside a schema without indixes or triggers, just pure data. I thought the easiest way would be to copy the data between the schemas as they are exactly the same. However if you tell me DataPunp is the best solution i won't deny using it :).
    When you export data a file is created. does that also mean that the exported data is deleted inside the schema?
    best regards
    Jörn
    Ps: Guido, you are following me, aren' t you? ;-)

  • How to compare data between two tables?

    Hi,
    My team is trying to develop a SAP data migration tool (DMT) using ABAP.
    One of the functionalities in the DMT is to validate the data in the staging area against the loaded SAP data.
    The tables in the stagin area are customer tables (i.e. user-defined tables starting with Y, Z).
    How do I compare the data in the staging area against data that are loaded into SAP tables? Are there some built-in SAP functions to do this? Or, are there some better ways of doing this (e.g. instead of comparing against data in the SAP tables, we compare with some INTERNAL tables)?
    Any help would be greatly appreciated, thanks!

    Hi Kian,
    Use <b>SCMP</b> transaction to compare data between two tables and you can not use this for comparing internal tables.
    Thanks,
    Vinay

  • How to check relation between two tables in same database

    How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64

    Hi,
    Try this,
    SELECT   cons.owner AS child_owner, cons.table_name AS child_table,
             cons.constraint_name constaint_name,
             cons.constraint_type constraint_type, col.owner parent_owner,
             col.table_name parent_table, col.column_name column_name
        FROM dba_cons_columns col, dba_constraints cons
       WHERE cons.r_owner = col.owner
         AND cons.r_constraint_name = col.constraint_name
         AND col.owner = 'MY_USER'
    ORDER BY child_table;Thanks,
    Shankar

  • Transaction to see common data between two tables

    Is there any transaction to see common data between two tables with out creating views.
    what is the transaction to see the link between two tables
    regards
    pavan

    Hi,
            Go to a transparent table for which you want to know the common fields, from there click the button GRAPHICS (shortcut Ctrl + Shift + F11) in the application tool bar. Then you are redirected to a list containing the tables belonging to the same group. There select whatever tables you would like to see and click COPY. A window will pop-up and will show the relationship between the fields of the tables in a flow chart format.
    see to this link also.
    Common fields b/w  tables
    Regards,
    Revathi Bhoopal.

  • Transfer large data between two databases via ODI

    Hi, we want to transfer our 2 billion records (70gb) A database oracle server to B database oracle server via ODI LKM SQL to Oracle (SQLLDR).We use a filter like "prod_enter_date>sysdate-1" for daily  records(about 200.000).It takes about 1 our.How can we transfer data faster, thanks  for your advice.

    OK so assuming the Oracle DB's can see each on the network other have a word with your DBA's about creating a DBLink and test out the LKM DB Link KM.
    Also try Uli's amended LKM if dont want to be too intrusive on your souce system creating synonyms etc. : http://sonra.io/tag/lkm-db-links/
    I have used both and they work fine.
    Basically you are currently unloading a large amount of data, transfering to another location and then uploading that data with no transformation to the target environment, a DBLink LKM will transfer this data without the need to unload / upload , just the network transfer.
    Another thread here : https://forums.oracle.com/message/9630782
    To re-quote the that thread quoting the documentaion for that LKM : "As it says in the component description - "This module is recommended when developing interfaces between two Oracle servers."

  • How can I copy large amount of data between two HD ?

    Hello !
    Which command could I user to copy large amount of data between two hard disk drives ?
    How Lion identify the disk drives when you want to write some script, for example in Windows I sue
    Robocopy D:\folder source\Files E:\folder destination
    I just want to copy files and if the files/folders exist in destination the files should be overwritted.
    Help please, I bougth my first MAC 4 days ago.
    Thanks !

    Select the files/folders on one HD and drag & drop onto the other HD. The copied ones will overwrite anything with the same names.
    Since you're a newcomer to the Mac, see these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual,
    Snow Leopard Edition.&
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • How do you find the average value of all the data between two points on a single channel

    I am tring to calculate the average value of all the data points on a single plot between two seperate points
    I have attahced an illustration.
    Tim
    Solved!
    Go to Solution.
    Attachments:
    plot.jpg ‏173 KB

    Hey smoothdurban,
    I've seen Brad's code, and trust me, it's worth the effort to let him help you get it up and running - it's definitely the most ideal way to solve this problem.  However, as Brad said, there are multiple ways to tackle this - both interactive and programmatic - so in the meantime, I'll take a second to detail one of the interactive and sure-fire ways to find the average of data between two points on a single channel.
    We'll use"Flags."  Set up your VIEW graph exactly as you did on your original screenshot, using Band Cursors to approximate the beginning and ending X-values representing the range you want to examine.  Next:
    1. Click the "Set Flags" button () that is a part of your 2D Axis System.  Note that you can hold down the Shift button if you ever decide you want to do this on more than a single curve at one time.
    2. Select the "Flags: Copy Data Points" button that enables after Flags are set.
    3. This creates new channel(s) in the default (bold) group in the Data Portal that contains only the Flagged data.
    4. Select DIAdem ANALYSIS.
    5. Select Statistics » Descriptive Statistics.
    6. In the Channels input, select the newly created channel containing your Flagged Y-Data.
    7. Ensure that the Arithmetic Mean parameter is set.  You can preview the data and the result in the dialog before pressing OK to execute the calculation. 
    You may have noticed that in the Descriptive Statistics calculation, one of the parameters that you can set is the range of channel rows to operate on - so, if you know the row numbers of your beginning and ending X-values, you could just simply run the Descriptive Statistics calculation and use this parameter to operate on a row subset of your original channel instead of the entire channel.
    Derrick S.
    Product Manager
    NI DIAdem
    National Instruments

Maybe you are looking for