Migrating DHCP Server From OpenSuse to Windows Server 2008 R2 Standard

Hello,
I'm planning to migrate a DHCP server from OpenSuse to Windows Server 2008.
Is there any procedures for that ,Or should i configure my Windows server 2008 DHCP service again.
Thank you 

Hi,
I have done somthing similar in the past. Basically i got exported all the scopes and settings from the linux dhcpd service, then created the scopes in Windows, stop linux dhcp service and start windows one. Use conflict detection setting to leverage any
IPs lease from linux server.
Hope it helps.
Regards,
Calin

Similar Messages

  • How can i Migrate a database from DB2 to SQL Server 2008r2.

    Hi Gurus,
    Kindly help me letting me know the process for migrating the database from DB2 to SQL Server.
    1) Is there any way to migrate a database from DB2 to SqlServer. (My assumption is we can not migrate database, if wrong correct me gurus).
    2) Or we can only transfer data from that DB2 database to SQL Server (Using SSIS packages).
    Please help me knowing the process to migrate the data from DB2 server to MSSQL server. Even am reading the documents available in the web.
    Thanks in advance.. :)

    Microsoft provide a migration assistant for DB2 to SQL Server:
    http://www.microsoft.com/en-us/download/details.aspx?id=45296
    SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from DB2 to SQL Server and Azure SQL DB. SSMA automates all aspects of migration including migration assessment analysis, schema and
    SQL statement conversion and data migration. 
    Hope that helps

  • Migrating SAP products from a non-SQL Server platform to a SQL Server 2005

    Hi,
    I have another question too.
    Can someone pls provide me the Considerations for Migrating SAP products from a non-SQL Server platform to a SQL Server 2005 platform?
    More specifically from Oracle to SQL 2005.
    Regards
    Abhi

    Hello
    You need to perform an OSDB migration.
    This will involve exporting your SAP system into a DB neutral format and then reloading this into an SQL 2005 SAP system.
    Please review http://service.sap.com/osdbmigration
    I recommend you review the homo/heterogeneous system copy guide for your SAP release.
    Thanks
    N.P.C

  • Can I use Azure Backup and Windows Server Backup in a Windows Server ?

    Can I use Azure Backup and Windows Server Backup in a Windows Server ?
    I want to use both Azure Backup and Windows Server Backup for two senarios.
    For Disaster Recovery = Azure Backup to Azure Storage.
    For non-Disacter Recovery = Windows Server Backup to a on-premises disk.
    The non-Disaster Recovery mean a file or folder recovery, disk crash recovery, migrate to another servers.
    The non-Disaster Recovery need the speed of recovery just like 10 TB recovery as soon as possible.
    If I can use both Azure Backup and Windows Server Backup in a Windows Server,
    Are there any notes for using both ?
    Regards,
    Yoshihiro Kawabata 

    Hi Yoshihiro Kawabata,
    Thanks for posting here!
    Azure Backup to Azure Storage and Windows Server Backup to a on-premises disk. These are two different question and can be answered individually.
    Azure Backup to Azure Storage - Possible.
    Windows Server Backup to a on-premises disk - Possible.
    Can I use Azure Backup and Windows Server Backup in a Windows Server? Is a question.
    I will check on this and get back to you at the earliest.
    Thanks!
    Sadiqh

  • Backing up Exchange Server 2013 CU3 with Windows Server Backup Program

    Looking at configuring Windows Server Backup Program to backup Exchange Server 2013 CU3 which is a member a DAG Group using a specific Backup Domain Account.  
    From my understanding from the following technet Article" Using Windows Server Backup to Backup and Restore Exchange Data" at  http://technet.microsoft.com/en-us/library/dd876851(v=exchg.150).aspx I cannot use wbadmin.exe has it uses an older
    unsupported version of Powershell.
    My question is what are the minimum AD rights required for an AD account needed to be able to backup/restore Exchange Datastore using Windows Server Backup Program in Windows Server 2012?
    Thanks,
    NIck 

    Hi Sathish,
    After looking at your response, it all make sense except when I look at what exchange right assigned via RBAC.  I understand that the backup service account will require access to the exchange databases
    to be able to backing and restoring them.  After looking at the different roles  
    I'm wondering if I require to assign both the Databases roles for Backing up the databases and the Disaster Recovery Role as well to be able to restore the databases has well as having a mailbox on the exchange
    server for the backup service account?
    Below is explanation of the roles via the ECP
    Database Role
    This role enables administrators to create, manage, mount and dismount mailbox and public folder databases on individual servers.
    Disaster Recovery
    This role enables administrators to restore mailboxes and database availability groups in an organization.
    Thanks,
    Nick

  • Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

    Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
    It should be supported from technet site
    And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
    Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

    Thanks for the reply.
    I copied some sentences in Setuperr.log
    2014-07-10 23:58:33, Error                       
    Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
    {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
    does not exist.[gle=0x00000003]
    2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
    {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
    usbhub20.
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
    Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
    and drmmgrtn.dll?

  • Installing Application Server 10g R2 on Windows Server 2008

    Hi all,
    I want install Oracle Application Server 10g R2 on Windows Server 2008 ( 64 bit).
    It always prompt error "ORA-12560: TNS Adapter error", when I try to install Oracle Application Server Infrastructure 10g.
    Does anyone know how to solve this problem?
    Thanks in advance.
    Regards,
    MKBH

    Basically use for internal web server only. I'm not sure can I use Oracle weblogic 11g instead of OracleAS 10g R2. I'll use some of the components like Oracle HTTP Server, Oracle Application Server Containers for J2EE(OC4J), Reports Services, Forms Services, Metadata Repository for Oracle Application Server Middle-Tier and etc.

  • Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

    Hi
    Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
    Hub Transport Role
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if ($exsSid -eq $null -or $exsSid -eq "")
              $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
              start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
            " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
    Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:25:35
    Sandeep Gupta

    Hi,
    It might be a permission issue.
    1 :
    Add Manage auditing and security log Properties
    Administative Tools > Local Security Policy > Local Policies > User Rights
    Assignment > Manage auditing and security
    Add
    Exchance Servers.
    2. Check Exchange Trusted Subsystem
    1)Open Active Directory Users and Computers
    2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
    the right hand side select the Administrator group,goto the properties
    3)Click members tab and add Exchange Trusted Subsystem
    4)Click ok twice
    5)Reboot the Exchange server
    6)Rerun the Exchange setup
    Best Regards!

  • How can i install application server 10g R2 on windows server 2008

    Dear friends,
    I need to install application server 10g r2 on windows server 2008.
    Is there any patch for this. where can I get those patches?
    plz help.
    Divya Alok

    MKBH wrote:
    Why OracleAS 10.1.3.x version doesn't have OracleAS Infrastructure components?Because not all OAS releases were complete software versions. By complete software versions, I mean they were not a software version where each component (like Identity Management, Portal, BI, SOA Suite, etc.) would have an updated version.
    OAS Release 2 (10.1.2.x.x) was a complete release but OAS Release 3 (10.1.3) was not. After release 2, Oracle Fusion Middleware OFM 11g is now a complete release.
    OracleAS Identity Mgmt (10.1.4) was the updated version of OAS Id Mgmt after OAS 10.1.2 and before OFM 11g.

  • Applications server 10g R2 certified windows server 2008.

    hi all.
    can anyone help me out.Is application server 10g R2 and windows server 2008 certified or still not certified?
    any suggestion?
    sarah

    Please see this link.
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html#BAJGCBEA
    AMN

  • Need to know if Firefox 6 is compatible with Citrix XenApp Server 6 running on Windows Serve r2008 R2 virtualized on a VMWare environment. Thanks in advance!

    We are setting up a new environment for a client based on Citrix XenApp Server 6 running on Windows Server 2008 R2 which is virtualized on a VMWare hypervisor. Client uses Firefox and we need to know if it is going to work or not. If not, what is the root cause (i.e. XenApp, Windows Server 2008 R2, virtualization).
    Thanks again! :)

    I only ask because, in the past we were able to install a related product, InDesign CS5 in Citrix. In fact, Adobe had published documentation for doing exactly that: here. I just haven't seen anything similar for Illustrator CS6 and wanted to check.

  • Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

    The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
    http://bit.ly/1pYZT3F
    Thanks -
    James McIllece

    hello again,
    meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
    http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
    Likely to be overseen at the end of one paragraph it says:
    "Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
    Question : Is this an official statement and is it still valid with most recent
    Windows Server 2012 R2 that NFS client does NOT support NFSv4.x  ??
    thanks - Rainer

  • Windows will not get a DHCP address from my OS X Server

    Is there a trick I need to do to get my windows machines to get and address from my OS X Server?

    i have had the same issue. Windows clients (XP, 2003, 7) just could not receive an address from the dhcp server.
    I think i got it solved by removing an invalid line in my dhcp server config file.
    This is what i did:
    stop dhcp server
    open /etc/bootpd.plist (you need admin rights to edit)
    remove the following two lines:
    <key>dhcp_domain_name</key>
    <string></string>
    save file
    start dhcp server again
    alternatively, you can fill the dhcp_domain_name with a valid domain name suffix. Both options seem to have worked just fine for me.
    <key>dhcp_domain_name</key>
    <string>whatever.mydomain.com</string>
    Tips:
    I am using Sublime Text for such tasks. It asks for administrator password when trying to save the file, much more convinient than trying to use TextEdit
    To get to the /etc directory from your favorite text editor easily: Go to the standard open file dialog. Press Cmd+Shift+G. Type /etc and press enter
    also see the official documentation:
    https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/bootpd.8.html
    dhcp_domain_name
    The default DNS domain name (option code 15).  If this property is not
    present, the server will supply its own default domain name (if available).

  • Migrating Samba/LDAP from Linux to OSX Server

    Hi all. I've inherited a fairly "pure" implementation of OpenLDAP and Samba 3.x, running on a Debian server. While it's stable enough, making user changes is not terribly easy, and involves using LDAP and then smbpasswd, for example. I can manage this well enough myself, but for political reasons (mainly having to do with the "beer truck" theory of information loss), I'd like to standardize on something somewhat more intuitive. Additionally, I want to set up some groupware, etc, and haven't found much joy with most of the offerings out there. As far as resources, I've got one fairly nice PowerEdge that stores roaming profiles for windows users, as well as the LDAP server. I've got a second server for DHCP (no DNS), and did I mention no DNS? My third server is for mail. And then I've got an XServe that I can install Tiger Server on. Here's what I'd like to be able to do:
    * Make the XServe the PDC, and demote the existing linux PDC to a BDC role.
    * Use the existing LDAP server if at all possible, or setup mirroring between the two.
    * Keep the user profiles and other assorted directories on the linux machines where they are currently.
    * Move the entire domain, all user and machine accounts, etc. onto OpenDirectory.
    * Do this without causing noticeable disruption to my userbase - I will have the opportunity to do the migration during a holiday week where not many people are around, but I don't want to rebind every stinking computer to the domain.
    * Earn the respect and adulation of my peers, and have them buy me free coffee forever.
    I've paged through the "Migrating to Mac OS X Server from Windows NT" PDF over on the Documentation page, and some of it looks useful, although a lot of it looks pretty specific to defenestration, whereas my project is more like a penguin demotion. The stuff I'm most concerned about in this respect is keeping the file shares where they are, dcpromo, and using the extant LDAP server.
    Also, I'm wondering how beefy an Xserve I'd want to have to do the user auth piece. I'm currently supporting about 140 users and about 250 machines, although the user count will jump to around 800 when I create accounts for the secondary students.
    Thanks!

    agostini,
    I've successfully moved users off a similar setup (Debian Linux, Courier IMAP, SquirrelMail) to my new Xserve. I used imapsync-1.239
    http://www.linux-france.org/prj/imapsync/dist/
    (it's about halfway down the page - Dec 2007 release)
    I initially tried using the MacPorts install of the same version, but it constantly failed to authenticate with the Xserve. I have my Xserve setup for always using CRAM-MD5 auth. (Make sure you have all of the Perl MD5 modules install, including the optional ones, if you use MD5 auth). So, I downloaded it and compiled it directly. This eventually worked and with only a couple of bad emails, out of thousands, that did not transfer. It also will retain flags set on the previous server (seen, replied, etc.). I ran it from the Xserve and connected to the Linux box remotely.
    I have no experience with Qmail.
    If you use procmail on the Linux machine though, you will need to recreate those scripts as sieve scripts on the Mac. I found the SquirrelMail plugin for sieve scripts most helpful.
    Larry

  • Migration 10.2.0.1.0 windows server 2003 to linux 11gr2

    Hello
    we are migrating from 10.2.0.1.0 windows server 2003 to unix 11gr2
    please suggest any material regarding this kind of migration
    there is a test environment also, so that i can test
    right now i have downloaded the oracle linux 5.7 and will be installing 11g on it
    for the test server----i am planning to use 'exp' since i have to export from windows to linux and then test the .NET applications on it
    any valuable suggestions would b helpful
    (rman and datapump also could be used i am aware)
    also what is better linux or solaris??
    thanks in advance

    Hi;
    I suggest to go wiht RMAN instead of datapump utulity. Because If you have lots of schema,trigger etc. you need to recheck them after import.So I prefer to go wiht RMAN
    I suggest review:
    How To Use RMAN CONVERT DATABASE on Source Host for Cross Platform Migration [ID 413586.1]
    Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
    You can also check my blog
    http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
    In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
    Regard
    Helios

Maybe you are looking for