Migrating Exchange server from 2007 SP3 to 2013
Hi All,
We are planning to migrate our exchange server 2007 SP3 to 2013 , what are all the best options available?
Thanks,
Mani L
Mani L
Hi,
Here are some articles which can help you to migrate from Exchange 2007 to Exchange 2013 for your reference.
Upgrade from Exchange 2007 to Exchange 2013
http://technet.microsoft.com/en-us/library/jj898581(v=exchg.150).aspx
Checklist: Upgrade from Exchange 2007
http://technet.microsoft.com/en-us/library/ff805032(v=exchg.150).aspx
Install Exchange 2013 in an Existing Exchange 2007 Organization
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
Exchange Server 2010 with SP3 Management Tools
Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx -
Can we install Exchange server 2003, 2007 and 2010 on Server 2012 R2 ?
Sir,
I want to know whether Exchange server 2003, 2007 and 2010 can be installed on Server 2012 R2 or not.
Thanks in advance.You can only install Exchange 2013 SP1 on Server 2012 R2
As far as I know Exchange 2010 SP3 can't be installed on R2 . The other Exchange Servers are too old -
How to migrate application server from Tomcat to WebSphere?
Hi,
I installed BO XI 3.1 32 bit in environment:
- AIX 5.3 64 bit
- Deployed Tomcat 5.5 from installing BO
- Oracle client 10G
I need to migrate application server from Tomcat to WebSphere 6.1 and WebSphere 6.1 Server 32 bit in Windows platform.
Could you someone give detail steps
Many thanks in advance and best regards,I tried manually to deploy web applications, but not successful. This is my deployment step following:
AIX 5.3: BOE XI 3.1 :
Copy all <INSTALLDIR>/bobje/enterprise120/java/applications/ to Windows Websphere D:\BO_WAS
WebSphere 6.1 location & IP (windows) :
C:\Program Files\IBM\WebSphere\AppServer1\
IP: 192.168.69.10
Log in to WebSphere Applicaton Server Administrative http://192.168.69.10:9060/admin
1. Under the Applications heading of the console navigation menu, click
Enterprise Applications on the left navigational pane.
2. Click the Install button and navigate to the location of the WAR file to
deploy. If deploying from a remote file system, select the Remote File
System option.
3. Enter a context root for the WAR file (e.g. /CmcApp for CmcApp.war)
(this format (/CmcApp) for Unix OS, have different in Windows ? Could you give me fully path?)
and
press the Next button, followed by Continue.
4. In "Step 1", give a unique name for your web application and proceed to
"Step 2".
5. Highlight the server you created (or highlight server1 if you didn't create
your own) from the Clusters and Servers and enable the Select
checkbox. Proceed to "Step 3".
6. Select the virtual host you created (or default_host if you didn't create
your own) from the Virtual Host drop-down list. Proceed to "Step 4".
7. Review the summary page, and press Finish when done.
8. Click Save to Master Configuration.
9. Click the Save link, then the Save button.
Finally the output is not available.
Many thanks in advance and best regards -
2007 SP3 to 2013 Migration - Public Folders Migration (-2147467259)
Hi Guys
I'm currently undertaking an Exchange 2007 SP3 to Exchange 2013 migration, and all has been going swimmingly so far. We've moved all mailboxes across and are at the final stages and just want to move the public folders across.
I've been following the instructions in: http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx this article, and we have gotten up to stage 5 (Start
the Migration Request). The process gets around 20% of the way through, and from what we can tell seems to migrate all content from PF folders, however it then stops. I've posted an extract of the log below, which should show you the error we're
currently getting (it tries then exhausts retries & stops).
16/01/2014 9:13:15 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (58/60).
16/01/2014 9:13:50 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:13:50 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:13:50 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:13:50 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:13:50 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:13:51 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (59/60).
16/01/2014 9:14:25 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:14:25 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:14:25 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:14:25 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:14:25 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:14:25 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (60/60).
16/01/2014 9:15:00 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:15:00 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:15:00 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:15:00 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:15:00 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:15:00 AM [EX2013] The job encountered too many transient failures (60)
and is quitting.
16/01/2014 9:15:00 AM [EX2013] Fatal error MapiExceptionUnknownUser has occurred.
Furthermore, in the event log, I get the following logged as the PF migration errors out:
Request '' (d0963f2b-9d8e-4470-924a-72749ca32a36) failed.
Error code: -2147467259
MapiExceptionUnknownUser: Unable to make connection to the server. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 49064 dwParam: 0x1
Lid: 37288 StoreEc: 0x6AB
Lid: 49064 dwParam: 0x2
Lid: 49191 EMSMDBMT.EcDoConnectEx called [length=193]
Lid: 65063 EMSMDBMT.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 4744
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-01-16T01:15:00.7170000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: EX06
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 50544 ClientVersion: 15.0.775.34
Lid: 52080 StoreEc: 0x824
Lid: 44273
Lid: 49064 dwParam: 0x1
Lid: 37288 StoreEc: 0x6AB
Lid: 49064 dwParam: 0x2
Lid: 59431 EMSMDB.EcDoConnectEx called [length=193]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3EB][length=56][latency=15]
Lid: 59505 StoreEc: 0x3EB
Lid: 50544 ClientVersion: 15.0.775.34
Lid: 52080 StoreEc: 0x3EB
Lid: 1494 ---- Remote Context Beg ----
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 32121 StoreEc: 0x3EB
Lid: 9486 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 51152
Lid: 52465 StoreEc: 0x3EB
Lid: 60065
Lid: 33777 StoreEc: 0x3EB
Lid: 59805
Lid: 52487 StoreEc: 0x3EB
Lid: 19778
Lid: 27970 StoreEc: 0x3EB
Lid: 17730
Lid: 25922 StoreEc: 0x3EB
Context:
Operation: ISourceMailbox.GetFolder
Operation: ISourceMailbox.GetFolder
OperationSide: Source
Public Folders ()
EntryIDs: [count:1, [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A0300E76376BFA766CD4CB9725A08AC252BC90000000027220000]]
Folder: 'Public Root/NON_IPM_SUBTREE/StoreEvents{93ED8190-881A-40D2-B0FD-3615ADEB16CE}', entryId [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A0300E76376BFA766CD4CB9725A08AC252BC90000000027220000], parentId [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A03007943AF354860F8418A0338BB019906EE0000000000020000]
I've attempted to find some solutions, and searching for the respective error codes has suggested a couple of ideas, such as not being a PF Admin (checked), resource issues on source/destination servers (checked, and restarted for good measure), I saw mention
of a problem with NETBIOS resolution so added the source server into the host files (checked).
Any assistance would be greatly appreciated
CheersHello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Migrate Exchange Server 2010 Public Folder shared calendars to Exchange Server 2013
Dear All,
I have an question about calendars under public folder migrating to new exchange server 2013. When completed the PF migration progress, will it also migrate calendars under sub-folder under PF to new PF mailbox?
For example: in exchange 2010 PF:
In exchange 2013
\Public Folder\sales\A1_calendar
--->
\ Public Folder\sales\A2_calendar
---> ?
\Public Folder\sales\A3_calendar
---> ?
\Public Folder\sales\A4_calendar
---> ?
Thanks in advance.
Regards,
Willis WongHi Willis,
This forum is for general questions and feedback related to Outlook. Since your question is more related to Exchange server, I'd recommend you post a new question in the Exchange forum for further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Fab40 templates migration from 2007 to SP 2013
We are working on migrating SP 2007 sites to sp 2013 and in 2007 Fab40 templates are installed and we are getting issue in SP 2013 when doing visual upgrade because of site definitons.Will these templates get upgraded to SP 2013 ?
SharePoint 2013 does not support for FAB 40 feature.
Try these links:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b3363e1d-ad1f-45cf-b1f0-1ddb40797876/40-fab-templates-migration-to-sharepoint-2013
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b920c152-8488-4d43-b609-a507c5730372/proper-upgrade-procedure-from-2007-2013-with-fab-40-templates
[custom.development] -
Migrating meeting resources from 2007 to 2013
We migrated our resource mailboxes thru the move mailboxes in 2013 EAC but now we're at the point of decommissioning our 2007 servers. Before the actual decommission we stopped all 2007 services and dismounted all 2007 databases. Once we did
this the resources would no longer work - errors pertaining to cannot directly book the resource.
I had to bring up the public folder database for the moved resources to work again. We do not use public folders any longer so we did not do any type of public folder migration. Do I need to do this for the resources to work?You can take a look at below given links to understand about Step-by-Step Migration Exchange 2007 to 2013.
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
hope it helps. -
Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?
Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID: 1564
Task Category: File Share Witness Resource
Level:Critical
User: SYSTEM
Computer: PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID: 1177
Task Category: None
Level: Critical
User: SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */ -
HT4796 Is it possible to migrate Exchanger Server mailboxes to an apple enviornment?
I would like to find out if it's possible to migrate Exchange 2007 Server Mailboxes to an Apple Environment. If the answer is yes, does anybody knows how this can be achieved? What tools and methods will be used and are there any requirements in terms of H/W, S/W, O/S, etc...
You could connect your old MacBook to your TV with an adapter cable and play directly from it as well as stream from shared libraries. Depending on how old your MacBook is, however, you may need to use a separate cable for audio and the video quality may not be as good as with an ATV.
-
Upgrading Exchange Server 2003 to 2010 to 2013 is worth???
Hello there, I am planning to upgrade about 30 users from exchange server 2003 to 2010 and finally to 2013. Is it worth to upgrade in this way because this steps are hard and very time consuming. What if, if I just copy all the user mailboxes directly to
exchange server 2013 and configure 2013 as a new exchange server and decommission old exchange server 2003?
How to copy user mailboxes to fresh exchange server 2013?
Please help me out.
ThankxYes, Export the PST from User Mailbox and Import it into Exchange 2013 Mailbox. But the problem is, you can't install Exchange 2013 in your current Exchange 2003 environment.
Only option is to install Exchange 2010 first and migrate all the users to Exchange 2010. Also Replicate the Public Folders too(If you are using)
Decommission Exchange 2003 entirely. Install Exchange 2013 SP1 and Migrate the User to Exchange 2013.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Manually removing Exchange Server from Exchange 2010 Organization
Hi everybody, I need some help with a problem removing my last Exchange Server 2003 (the only one now, back-end) from my mixed environment, actually I have one Exchange 2010 server with all the mailboxes, I have replicated public folders and OAB and List
Address Books to it, after that i removed my front end server from my environment but when I tryed to remove my back-end, I have the error 0x80072030 (8240) when I ran the uninstallation of Exchange from Add/remove Programs: I read
tons of articles but anyone helps (i have removed all mailboxes from that server), my last resource is removing the last Exchange Server 2003 from my mixed (2003/2010) organization, I have read articles about to remove Exchange from one server and to remove
Exchange from one site, also to remove Exchange to reinstall after, but my goal is remove Exchange at all because I have Exchange Server 2010 too and finally need to migrate to Exchange 2013 so I need to clean Exchange 2003 manually from my
organizatión.
Please somebody knows a procedure to remove Exchange Server 2003 from Active Directory and left only Exchange 2010 to be able to migrate to Exchange 2013.
thanks in advance.
Felxs
FelxHi,
Let’s begin with the following similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/1c10c868-9b1d-43fe-afe1-d630626e2c28/exchange-2003-removal-fails-w-error-code-0x80072030-8240-there-is-no-such-object-on-the-server?forum=exchangesvrdeploylegacy
And we can check the following possible reasons:
1. HomeMDBBL attribute
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f
2. msExchHomeServerName attribute (all pointing to Exchange 2010 server)
3. the "famous" postmaster issue:
http://support.microsoft.com/kb/283089/en-us
We can also try to manually remove the old Exchange Server by:
http://support.microsoft.com/kb/833396
Thanks,
Angela Shi
TechNet Community Support -
SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed
Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
VoonThank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :) -
Exchange Server Std 2007 mailbox store problem with a single account email showing
Under Exchange mailbox store there is no existent account name who is receiving and sending email without any errors.
Account was not hidden and was always working. Email client of this account works properly with Outlook 2007. Accounts listing in Exchange management snap-in does not contain his email record. We found that address book of other client does not display his
name and tried to find his record to uncheck hidden but there was no any records in the list. How to find and fix this problem if no errors encountered with the delivery of his mail and replies back?Hi,
From your description, I recommend you check if this problematic user is existed in ADUC. What's more, I recommend you create a same email account in your Exchange server and check if there is any error.
Best regards,
Amy Wang
TechNet Community Support -
"Migrating" computer variables from 2007 to 2012
I'm in the process of migrating server clients from a 2007 to 2012 environment. The computer objects all have quite a few computer variables associated with the objects that are used during OSD task sequences.
When we do a "bare-metal" build, the computer objects are deleted and recreated, and the variables are re-populated from a reference source of truth on the new object. So no problem there.
For the migration though, I was going to install the CM2012 client (basically upgrade the client from 2007) on the servers which will then have them register with the CM2012 site. However when this happens the variables won't be applied to the 2012
computer object.
I have a few ideas to resolve this, but was wondering if anyone else had already dealt with this situation?
Some thoughts I was considering:
1: Orchestrator job that identifies "new" computer objects in 2012 and regenerates the variables from the source of truth
2. Powershell/WMI/VBScript that reads the variables from the 2007 computer object and "copies" them to the 2012 object
Any other thoughts or suggestions welcome
Scott.Thanks Torsten, I do appreciate the replies, but I will have to respectfully disagree with the question being answered perfectly.
I had asked "...was wondering if anyone else had already dealt with this situation?". I don't actually see how an answer of "I've never done this, but use powershell" is the perfect answer. This would also not serve to help any other
people that might come across this post looking for a similar solution. I had marked that post as "helpful", but did not "mark as answer" because it didn't actually offer anything beyond what my first post already stated.
However, I'm not looking to argue. I'll post any powershell scripts or other things I end up using to help anyone else who comes across this post. There are far too many posts in the TechNet forums that just seem to get automatically closed as answered
when there is no real answer provided.
Maybe you are looking for
-
How do I burn a .mov file to DVD?
I need to burn an MPEG-2 video file saved as .mov to a DVD that will play in a regular DVD player. I have tried opening iDVD and the selecting 'Create a New Project'. When I have selected a location for the project and the main window opens, I go to
-
Import / Synch won't recognize jpgs
Since I updated my RAW plugin on Lightroom (updated to the most current version) it will not recognize random jpgs in folders. I have a folder with 18 jpg files and it will only recognize and import 4 of them. I have tried synchronizing the folder
-
How to display Account Description in Description column taking AcctCode
Can anybody find out the error in this query. I am trying to get Account Name in AP Invoice - Service document on the input of Acctcode at Row level by the user. SELECT Acctname from OACT where AcctCode='$[PCH1.AcctCode]'
-
I am setting up a demo system for cFolder and was able to export document structure from CAD Desktop to CFolder. The neutral documents in the cfolder ie JPG cannot be displayed in ECL Viewer for redlining. There is a error message dispalyed saying th
-
Hello All, Our Office using Microsoft Exchange and outlook e mail clients. In Outlook, When hit new e mail and i can choose option to send to all people as my desire. But I want only set two or three or four e mail people and when i want to send to