Migrating from 32 bit server to 64 bit server
Hi
We have planned to migrate our portal server from 32 bit to 64 bit.
I need your help in identifying the tasks to be performed after the migration.
Migration will be done by a BASIS consultant.
My job would be to make sure that portal is up and running with all the settings same as it is on the 32 bit old server.
We are operating on EP 7.0 (2004s) SPS 13.
We are using LDAP for internal users and UME for external users.
EP system is connected to R/3 4.7 and BI 7.0 systems.
New system will have different IP address and logical name but same SID.
It would be great if I get the url of the help links and documentation.
Regards
Vineet Vikram
Vineet,
Itu2019s difficult to identity all tasks you need because itu2019s depends of your scenario.
But basically you can check:
u2022 UME configuration (configuration, SSL, XML, security policies)
u2022 KM configuration (repository, crawlers, indexes, channels, system, ACL cache, search options)
u2022 Collaboration configuration
u2022 XML form filter
u2022 Anonymous users
u2022 Central portal configuration
u2022 Guided Procedures
u2022 Rule Collection
u2022 Data sources JDBC
u2022 ICE Protocol
u2022 Custom login page
u2022 Group x User x Role association
u2022 PAR and EPA transports
u2022 Web Dynpro applications
u2022 SLD check
Your basis consultant must pay attention some notes:
Note 1024539 - Recommended Settings for NW04 >= SP14, NW 7.0 >= SP6 on AIX
Note 1024700 - Installation/Upgrade information for NW04/NW 7.0 on AIX
Note 680617 - INST: Appl.Server in Heterogeneous SAP System Environment
Note 941735 - SAP memory management for 64-bit Linux systems
Note 861333 - Very slow start of the j2ee engine on AIX with 64bit IBM JDK
Note 723909 - Java VM settings for J2EE 6.40/7.0
Reward points if itu2019s helpful
Similar Messages
-
Migration from 32-bit to 64-bit on Oracle 9.2.0.5
Hi guys.
I have two question for migration 32 bit to 64 (x86_64) bits on Oracle 9.2.0.5 for SAP 4.7 Enterprise?
1.- When i migrated 32 bits to 64 (x86_64) bits is necesary migrated to Oracle 10 ?
In the note SAP Note 960769 - Windows: Migration from 32-bit to 64-bit (x86_64), say that, pag 4:
" Oracle:
=====================================
On Windows Server 2003 X86_64 (64-bit), you may only use Oracle 10g Release 2 (10.2) software for X86_64 (64-bit) as a database. Note 949116 describes the installation (homogenous system copy) of old products that were not originally released on Oracle 10g Release 2 (10.2). If you want to make the copy using the backup/restore procedure, for which the source database was not yet upgraded to Oracle 10.2, see Note 932722"
But, in the pam matrix say that support for 9.2.
I confused for the information.
2.- In the case that is not necessary to migrate to oracle 10, i can execute the migration to 64 bits the SAP 4.7 with the procedure Backup/Restore?
I don´t have the new server, the server for the migration is the same. The procedure you want to follow is:
1.- Backup Offline all server.
2.- Delete the server, i install the server on Windows 2003 64 bits.
3.- Install SAP 4.7 on kernel 64 bits.
4.- Restore de backup offline (only data): datafiles, archive log, redo log.
Aprecciated for the help.
Best regards,
DesiréHi,
According to Note:814834
#Note that there is currently no 64-bit support for the x86_64 platform
for Oracle 9.2 because Oracle does not provide a 64-bit DB client for this purpose,
and, in addition, 64-bit operation of the DB server is not supported.
This means that this DB version can only be used in conjunction with SAP components on
Windows 32-bit on x86_64 hardware in 32-bit mode.
For more information, refer to the "Oracle" section in the note.
Furthermore, it states 32bit SAP instance can connect ot a 32 bit Oracle 9.2 or 10.2 database instance.
So for your case, its better to upgrade your current database to Oracle 10.2 and then proceed with migration. -
Hi,
Woul it be possible to migrate Oracle Appcation R12.0.6 migration from 64 bit RHEL 5.3 to 32 bit RHEL 4.4?
ThanksHi,
Please see these threads.
Migration/cloning from 64 bit to 32 bit !!!!
Migration/cloning from 64 bit to 32 bit !!!!
11i: Can you clone from 64-bit to 32-bit?
11i: Can you clone from 64-bit to 32-bit?
Thanks,
Hussein -
Complications migrating from Snow Leopard Server to Mountain Lion Server.
I'm migrating from Snow Leopard Server to Mountain Lion Server. The article "OS X Server: Upgrade and migration" (http://support.apple.com/kb/HT5381) says
"Make sure that any DNS or DHCP servers on which your server depends remain running during the upgrade"
This advice is reinforced by the details of the article "OS X Server: Steps to take before upgrading or migrating the Open Directory database" (http://support.apple.com/kb/HT5300).
As the server I'm migrating from provides these services it will need to be running during the migration process. This would seem to limit my options to doing the migration from a Time Machine backup (or, making a seperate clone of the server's drive and connecting it externally to the new box)
My main concern is the seemingly inevitable clash that is going to occur on the network as the new server takes on the roles of the old one - while it is still running.
What are my options here ?
This is my second attempt as on my first try I did the migration from the TM backup with the network down - and none of my local network users or their home directories were migrated, although the settings for the mount points were, but there were no actual directories where they pointed to!
Clear directions on how to procede would be VERY MUCH appreciated
Thank you.Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts. -
Re: Migration from Sysbase Adaptive Server 11.5 to Oracle 8.0.6
I had a problem when using Oracle Migration Workbench to migrate a database from Migration from Sybase Adaptive Server 11.5 to Oracle 8.0.6 in NT environment.
It contains only 8 tables.
Firstly, it captured well the source database from Sybase. But It hang on every times when mapping tables in this database to Oracle.
Is there anyone experienced with this problem?
By the way, I would like to know that which way (tool) is the best one to migrate
A system from Sybase Adaptive Server 11.5 to Oracle 8.0.6
Any idea will be very appreciated?
Thanks
nullThanks very much.
I have sent both the error.log and my repository to [email protected]
Could you please let me know if you have any advice.
John -
Migration from MS SQL Server 7.0 to ORACLE 7.3
I am unable to download WorkBench. Does it support the migration from MS SQL Server 7.0 to ORACLE 7.3 anyway.
Actually, I have to do the conversion from MS SQL Server 7.0 to ORACLE 7.3. I am thinking to do migration firt then do the conversion by writing the packages. Is there any other way to do it......
I am unable to download WorkBench. Does it support the migration from MS SQL Server 7.0 to ORACLE 7.3 anyway. -
Migrating from MS-SQL Server to Oracle
Hi,
Is there any Java Tool to migrate from MS-SQL Server to Oralce?
(My Organization's data is already stored in MS-SQL Server database, now we want to migrate to Oracle;
is there any easy way to pull data from MS-SQL Server and push into Oracle database)
thanks,I think u should use a third party help to resolve this problem, i use dbload to solve it when i was migrated my data, it can migrate almost any data, it helps me to convert MSSQL to MYSQL, MS access to MSSQL, mysql, csv loader, foxpro and MSSQL to MS access, MYSQl, CSV, foxpro etc. i found it on google search.
Download Free : http://www.dbload.com -
Changes in webservices while migrating from Oracle App Server to WebLogic
Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj -
i am using windows 7 64 bit. it shows 2.45gb usable out of 4 gb . it was working fine untill i installed 32 bit windows 7 from then onwards it has started to show 2.45 gb usable out of 4gb. i formatted the disk and migrated to 64 bit but the problem
has not solved it again shows 2.45gb usable out of 4 gb.please helpHI
Ensure that your Graphic Card is not sharing the memory with RAM, It could be one reason so get it checked and if yes, the reduce the memory on BIOS for Graphic Card -
Check Stored Procedures after Migration from MS SQL Server 2008 to Oracle11
I successfully migrated my application database (azteca) from MS SQL Server 2008 to Oracle 11g R2. After migration, I found there are few stored procedures are not valid. How do I check these invalid stored procedures and find what is wrong with them by using SQL Developer? Thanks for your help.
KevinHi Kevin,
You posted quite a bit today, so perhaps you have already worked this out. If not...
1. View -> Reports -> Data Dictionary Reports -> All Objects -> Invalid Objects [for a specific schema name]
2. Next, for each invalid stored procedure listed in (1)...
a. Open in the code editor from the Connections navigator tree
b. Click on the Compile icon (two gears meshed together) in code editor tool bar.
c. Look in the Compiler log pane for errors.
d. Correct the errorsOf course, success in addressing any errors depends on your skill level dealing with Oracle PL/SQL.
Also, it may be helpful to read over section *3.2 Stored Procedures* in the supplementary migration guide:
http://docs.oracle.com/cd/E35137_01/doc.32/e18462/trig_stored_proc.htm#CHDEIGBC
Regards,
Gary
SQL Developer Team -
Hi all,
the company I work for wants to migrate its Oracle Application Server 10.1.3.5 (with JRE 1.6) to WebLogic 12 and we need to guess which kind of remediation could be needed to have all web-apps still working.
The concerned applications are using dated technologies:
direct JDBC connections to db
JPA 1.0
connection pools with Oracle JDBC drivers
some apps are compiled with Java 1.4, some others with Java 1.6
servlet 2.3
JSP 2.0
We do not expect to come accross big issues but I'm not skilled on this kind of matters so I would like to receive seggestions or alerts from experts. Any remark will be appreciated.
Thank you all.
Regards,
LucaHi Luca,
It would be better if you asked this question in the Application Server forum which should be at this URL -
Application Server
and the general forum here -
Oracle Application Server - General
Regards,
Mike -
Migrating from MS SQL Server 2005 database to Oracle 10g
Hello,
I wanted the full procedure or steps to Migrate the MS SQL Server 2005 database to Oracle 10g. Is there a known procedure to do this or is there a tool which is used?
I have not done migration of database from MS SQL Server to Oracle. Any help is appreciated. Thanks a lot for the time.
Regards,
RPSWrong forum, go to the database forum!
cu
Andreas -
Migration from Small business server 2011 standad to Windows 2012 Server Standard
Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir OvadiaHi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support -
Data migrated from MS SQL Server 2k to Oracle8i is not the same :(
I'm trying to help a customer here who is trying to migrate a
table from MS SQL Server 2000 with column WORD of type varchar
(100) to Oracle8i (8.1.7.2) using Oracle Migration Workbench
1.4.0.1 using MS SQL Server 2000 plugin. That column has unique
values and has a primary key enabled on it. When migrated, the
table on Oracle will have duplicate and incorrect data as well
as ORA-2437: cannot validate (JAVAFARM.PK_IDX_WORD) - primary
key violated.
The data on both tables look like this :
ss2k value oracle value
========== ============
€ ┐
… ┐
’ ┐
– ┐
ƒ ┐
Y= ┐
4 ┐
–0 ┐
— ┐
& ┐
‘ ┐
Any idea what could be wrong or how to fix such thing?
Thanks :)
Fawaz.otn.oracle.com -> technologies -> Migration Workbench ->
Oracle Migration Workbench Release 1.4.1.0.0 for Windows (yes
even for 14101 beta) -> Agree to export/license conditions ->
enter email or ignore -> Scroll down page to beta versions ->
download omwb14101.exe (or download it piece by piece) and
sqlserver2000.exe
Regards,
Jim. -
Migration from sybase sql server 7 to Oracle 8i
Hi,
We have a very old Sybase database which contains some 2gb of data which is still being used by the users, we want to phase this out. We want to selectively export some tables and import them into our oracle 8i database. I have looked at documentation related to the migration workbench and it wont work for us because the version of sybase database is very old and I cannot find any client software either to help me to connect to the database.
I noticed in this forum, several messages suggesting the use of bcp to export data from the sql server and then sql*loader to import the data into oracle.
Can anybody please send me the information on bcp and how to export data using that and then how to import it in oracle. I am familiar with sql*loader but am not a expert so any help on how to define the control file etc for sql*loader would be helpful.
ThanksHi Hari,
You will be able to get the Beta release on this site in the next
couple of days in the 'Software' section of this page.
We are just waiting on our web page administrators to make this
software public.
The amount of interest in the SQL Server 7.0 plugin is
substantial, so we are focussing on making it production as soon
as possible.
Please provide feedback on the beta to [email protected]
Regards
John
Hari (guest) wrote:
: Hello great ones,
: I have a website converted from sql server 7 to Oracle 8i (okay
: the customer just woke up to the reality that Oracle rules in
: the e-commerce world..). I read about the workbench and the
: sqlserver 7 plugin which is still in beta.
: Is there any ways I could get hold of the beta release?. This
is
: a big company and if I could do the job fast, it would result
in
: more business to oracle for they will buy the production
: licenses
: (as well as Oracle Apps) after I show them I am successful and
: Oracle 8i is great.
: Any help would be appreciated and thanks a bunch. I am more
: concerned about database objects other than stored procedures
: only.
: Thanks in advance.
: Hari
Oracle Technology Network
http://technet.oracle.com
null
Maybe you are looking for
-
Inboun idoc error in sap r/3 from PI
Hi all, I am having problem in posting an idoc of type cond_A01, i am getting an error 51: Application document not posted, with a message: Table TA91 does not exist. When i checked for table TA91 it is not there, and when i checked A911 it is there.
-
I need to download Adobe Flash Player and Shockwave for my online homework for microbiology. Is it safe to do so, and will it show up in my launchpad? Do I need to worry about how much space these take up?
-
How to sync iPhone contacts to iPad contacts, having skipped iphone set up
After buying iphone5c I skipped part of set up. Now I want to make iphone sync to contacts on iPad. I have backed up iPad to iCloud, and the iPhone too, but can't seem to make them sync, nor find a way back to the initial setup menu to choose the op
-
ITunes repeatedly stops unexpected
Almost every time I want to add a song to the library iTunes doesn't work anymore and I have to force closing iTunes. Anybody knows this problem?
-
Is there an easy way to save each track's info from a song? ie. Each track's instrument, volume, pan, effects, etc. in a text file. Thanks!