Migrating from ASA5510(8.4.1) to 5525x (9.1x).. Should I be NAT worried?
I recently attempted to move from a ASA 5510 over to a spare 5520 running the same code (8.4.1) and ran into a problem with NAT to the Internet. I had set the same public IP address due to several vendors accepting only this certain address. So, when I migrated to the new 5520, NAT on this address did not work, meaning no traffic outbound would pass. However, if I change to another Public address no problems with traffic passing as expected.
So my question is, I am migrating to a scratch-built 5525x using 9.1x code and will be using the same Public NAT address as on the 5510. Should I expect traffic to pass as expected or do I need to migrate to another address? Logic is telling me there should be no issues, but recent experience is making me jittery...
Thanks for any comments
Dave
Your recent experience may not have had anything to do with NAT per se even though that's how it manifested itself most obviously to you.
I suspect it may have had to do with your upstream gateway's arp cache. I have often seen when replacing hardware that we need to ask the ISP to flush their ARP cache so they can re-learn the new MAC address association to your pre-existing IP.
In any case, NAT should not be adversely affected when migrating from 8.4(1) to 9.1(x).
Similar Messages
-
Migrating from 6.2 ITS to 6.4 ITS Integrated should convert Zservices
Hi All,
I listed all my services in my old 6.2 ITS sever using transaction SIAC1 in EBP server.
The list contained all SAP standard services and some Zsevices. Following are my questions.
1. Should i need to convert only Zservices by running the SIAC_CONVERT_FORM_4X ( Where to run this transction) OR also convert all SAP services also,
2. Should i need to do the following steps for EACH Zservices also in ITS 6.4 as defined by SAP
a.Create the ICF service name ? (In ITS 6.4)
b.Create ICF/ITS handlers ?
ICF/ITS handler is a class (CL_HTTP_EXT_ITS)
c.Activate the ICF Services ?
d. Maintain ITS service parameter ?
e.Change the HTML Templates (What changes are required e.g ??)
f. Publish the ITS services files
you have to publish the Integrated ITS services files to site INTERNAL.
3. Since this Integegrated ITS does not support Flow Logic and WebRFC application, what will be impact for our Zservices.
Thanks,
Gopaljust to precise some point :
e.Change the HTML Templates (What changes are required e.g ??)
this is required only if you were using URL generation in your templates.
in fact, integrated ITS does not use the same URL generation as the standalone ITS
from SAP :
The syntax of an ICF-based URL differs from the present form. This means that for all locations
in the HTML template, in which the URL generation is used, you must adapt it to the new syntax.
Procedure
1. Adapting the URL Generation in the HTML Templates parameters
1.1. ~session, ~client, ~login, ~language, ~password need to be replaced by session
name or parameters sap-client, sap-user, sap-language, sap-password respectively
1.2. Remove system-related coding (~messageserver, ~appserver)
2. ICF Session ID Handling
The ICF session is included in the ICF URL. URLs, in which no session ID is specified,
always start a new session.
Function wgateURL() generates a URL with ICF session ID, while the ~urlwgate parameter contains a URL without ICF session ID.
here the full help url :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/cd/8a424089ff2571e10000000a155106/frameset.htm -
Essbase migration from 6.5.7 to 9.3
Hello all,
We need to migrate Essbase applications from 6.5.7 to 9.3. I have read somewhere that it will not be a direct upgrade from 6.5 to 9.3.
1. Could you please someone explain the steps that we need to consider?
2. Can you please tell me from version 6.5 to which intermediate version and then to version 9.3?
3. Do we also need to buy the intermediate version?
Thanks
RameshHi,
Ramesh, we are not able to do the direct migration. If u want to migrate from 6.5.7 to 9.3, then you should need to migrate into intermediate version.
1) Steps:
By using migration wizard in AAS, you are able to migrate the application from one server to another.
First u need to migarte the application into 7X version and then to 9.3 version.
Important points to be remember :
* You must have Create/Delete Applications permissions for both the source and target Essbase Servers to use Migration Wizard.
* The target server for the application migration cannot be an older version than the source server.
* Make sure the target server is running.
2) Can you please tell me from version 6.5 to which intermediate version and then to version 9.3?
Need to migrate into 7X version.... i.e latest version of 7X ... It should be 7.1.5...
3) I am not sure in this.......
Regards
Cnee -
Migrating from an older 64GB to new 128GB MB Air--wi-fi or Time Capsule?
I have an 11" 64GB MBAir (Dec. 2010) that I use as my travel computer. It has recently reached capacity no matter how many photos, songs, and documents I delete. Decided to get the newest 11-incher, w/128GB and backlit keyboard. The old one was running Lion (updated from its original Snow Leopard), the new one has Mountain Lion pre-installed.
I want to migrate my files from the old to the new one. Took forever to back up the old one via Time Machine (on vacation, used a 64GB thumb drive and after 24 hrs. the backup still hadn't completed; had to keep the thumb drive plugged in during the 7-hr. drive home and the backup never completed. Tried again at home, this time to my 2TB Time Capsule, which took 22 hours. After searching Support, I found out it was necessary to install Mountain Lion on it (which I also installed on my home computer, a late 2011 15" 750GB MBPro) before running Migration Assistant. I opted not to transfer via Setup Assistant on the new one simply because of the disparity between OSes and the need to back up the old one first. I have finally deleted enough stuff from the old MBAir to install Mountain Lion (10.8.2), and am now doing a subsequent Time Machine backup of it to my Time Capsule. Have yet to back up the new one because I intend to migrate from the old one.
My question is how should I accomplish the migration: restore the new one from the latest Time Machine backup of the old one, via wi-fi between computers choosing only designated files and programs, or via Ethernet (for which I'd have to buy a second USB-Ethernet adapter)? Or should I just sync my iPhone & iPad, use iCloud, and move selected files, programs & apps via USB thumb drive? (When I bought the 15" MBPro last year, I had the Apple Store migrate the data from my old 2008 MB Pro--AppleCare didn't cover it, and it was something I should have been able to do myself but was too lazy. Don't want to have to keep schlepping up and back to the Apple Store anyway.Thanks for your reply, but the linked article doesn't cover my situation, which is a worst-case scenario. It appears that the only wired connections possible between a USB-only MBA and a USB/Thunderbolt MBA are both technically USB connections, which are not supported by Migration Assistant. So how does one transfer data from the old MBA to the new MBA without resorting to wi-fi?
One could, of course, clone the old startup drive via USB, then restore the clone to the new MBA, but that would take twice as much time. Information appreciated. -
Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-) -
Removing Public Folders after migration from Exchange 2007 to Exchange 2013
Recently we migrated from Exchange 2007 to Exchange 2013. We did not migrate Public Folders and are retiring them from Exchange altogether. I shut Exchange 2007 off for a couple of weeks to ensure 2013 functions properly and it does so we're
ready to decommission Exchange 2007. I was able to remove all the mailbox databases without a glitch. Using the EMC I click to remove the Public Folder database from Exchange 2007 and get the following message:
Error: The public folder database "server\storage group - Public Folders\ Public Folder Database" contains folder replicas. Before deleting the public folder database, remove the folders or move the replicas to another public folder database.
Any help appreciated.Hi Terry,
If you run the following command does it come back with any public folders?
Get-PublicFolderStatistics -Server "SERVERNAME" | fl
If nothing comes back you can follow this guide to manually remove the public folder database (at your own risk) http://haythamalex.wordpress.com/2011/11/24/how-to-force-exchange-server-public-folder-removal/
Cheers,
Jack
I get alot of output from that command.
AdminDisplayName : Schedule+ Free Busy Information - Exchange Administrative Group (FYDIBOHF
23SPDLT)
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300F31A2721DECB5542A9C497ED8ECFD
0290000000000070000
ExpiryTime : 05/05/2014 1:00:00 AM
FolderPath : SCHEDULE+ FREE BUSY\EX:/o=MY_ORGANIZATION/ou=Exc
hange Administrative Group (FYDIBOHF23SPDLT)
IsDeletePending : False
ItemCount : 70
LastAccessTime : 13/08/2014 1:00:00 AM
LastModificationTime : 28/07/2008 10:17:42 AM
Name : EX:/o=MY_ORGANIZATION/ou=Exchange Administrative
Group (FYDIBOHF23SPDLT)
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 35309B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300F31A2721DECB5542A9C497ED8ECFD
0290000000000070000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Offline Address Book - Exchange Administrative Group (FYDIBOHF23SPDLT)
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300F31A2721DECB5542A9C497ED8ECFD
0290000000000080000
ExpiryTime :
FolderPath : OFFLINE ADDRESS BOOK\EX:/o=MY_ORGANIZATION/ou=Ex
change Administrative Group (FYDIBOHF23SPDLT)
IsDeletePending : False
ItemCount : 0
LastAccessTime : 13/08/2014 1:00:00 AM
LastModificationTime : 28/07/2008 10:17:42 AM
Name : EX:/o=MY_ORGANIZATION/ou=Exchange Administrative
Group (FYDIBOHF23SPDLT)
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300F31A2721DECB5542A9C497ED8ECFD
0290000000000080000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : globalevents
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000140000
ExpiryTime :
FolderPath : StoreEvents{D771E649-5D06-499F-82D7-C26C4617A7AA}\globalevents
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 28/07/2008 10:17:42 AM
Name : globalevents
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000140000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : internal
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000130000
ExpiryTime :
FolderPath : StoreEvents{D771E649-5D06-499F-82D7-C26C4617A7AA}\internal
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 28/07/2008 10:17:42 AM
Name : internal
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000130000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OWAScratchPad{D771E649-5D06-499F-82D7-C26C4617A7AA}
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000160000
ExpiryTime :
FolderPath : OWAScratchPad{D771E649-5D06-499F-82D7-C26C4617A7AA}
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 12/08/2014 10:42:01 AM
Name : OWAScratchPad{D771E649-5D06-499F-82D7-C26C4617A7AA}
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000160000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : StoreEvents{D771E649-5D06-499F-82D7-C26C4617A7AA}
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 28/07/2008 10:17:42 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000120000
ExpiryTime :
FolderPath : StoreEvents{D771E649-5D06-499F-82D7-C26C4617A7AA}
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 28/07/2008 10:17:42 AM
Name : StoreEvents{D771E649-5D06-499F-82D7-C26C4617A7AA}
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D328567C1359964195421018B3836
4A80000000000120000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : ca77f936-9de2-11d3-9a74-009027301f0b
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 18/11/1999 3:48:02 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A03009029B751280DD3119A71009027301
F0B00000001D4CB0000
ExpiryTime : 14/07/2014 1:00:00 AM
FolderPath : OFFLINE ADDRESS BOOK\EX:/o=MY_ORGANIZATION/ou=MA
CC\OAB Version 2\ca77f936-9de2-11d3-9a74-009027301f0b
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/11/2011 10:22:02 AM
LastModificationTime : 27/08/2008 4:30:22 PM
Name : ca77f936-9de2-11d3-9a74-009027301f0b
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A03009029B751280DD3119A71009027301
F0B00000001D4CB0000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Default
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000160000
ExpiryTime :
FolderPath : schema-root\Default
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 27/08/2008 3:15:05 PM
Name : Default
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000160000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Schedule+ Free Busy Information - MACC
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 18/05/1999 8:48:25 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300A6E60A4F280DD3119A71009027301
F0B0000000000070000
ExpiryTime : 05/05/2014 1:00:00 AM
FolderPath : SCHEDULE+ FREE BUSY\EX:/o=MY_ORGANIZATION/ou=MAC
C
IsDeletePending : False
ItemCount : 130
LastAccessTime : 13/08/2014 1:00:00 AM
LastModificationTime : 28/08/2008 11:50:24 PM
Name : EX:/o=MY_ORGANIZATION/ou=MACC
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 63971B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300A6E60A4F280DD3119A71009027301
F0B0000000000070000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Offline Address Book - MACC
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 18/05/1999 8:48:25 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300A6E60A4F280DD3119A71009027301
F0B0000000000080000
ExpiryTime :
FolderPath : OFFLINE ADDRESS BOOK\EX:/o=MY_ORGANIZATION/ou=MA
CC
IsDeletePending : False
ItemCount : 1
LastAccessTime : 13/08/2014 1:00:00 AM
LastModificationTime : 27/08/2008 4:30:23 PM
Name : EX:/o=MY_ORGANIZATION/ou=MACC
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 22790B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300A6E60A4F280DD3119A71009027301
F0B0000000000080000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : exchangeV1
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000180000
ExpiryTime :
FolderPath : schema-root\microsoft\exchangeV1
IsDeletePending : False
ItemCount : 401
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 27/08/2008 3:30:25 PM
Name : exchangeV1
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 394761B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000180000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : globalevents
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000130000
ExpiryTime :
FolderPath : StoreEvents{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}\globalevents
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/11/2011 10:21:08 AM
LastModificationTime : 27/08/2008 3:15:05 PM
Name : globalevents
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000130000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : internal
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000120000
ExpiryTime :
FolderPath : StoreEvents{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}\internal
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/11/2011 10:21:08 AM
LastModificationTime : 27/08/2008 3:30:24 PM
Name : internal
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000120000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : microsoft
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000170000
ExpiryTime :
FolderPath : schema-root\microsoft
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 27/08/2008 3:30:25 PM
Name : microsoft
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000170000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OAB Version 2
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 19/05/1999 3:03:44 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A03009029B751280DD3119A71009027301
F0B0000000007DB0000
ExpiryTime : 14/07/2014 1:00:00 AM
FolderPath : OFFLINE ADDRESS BOOK\EX:/o=MY_ORGANIZATION/ou=MA
CC\OAB Version 2
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/11/2011 10:22:01 AM
LastModificationTime : 27/08/2008 4:30:22 PM
Name : OAB Version 2
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A03009029B751280DD3119A71009027301
F0B0000000007DB0000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OAB Version 2
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 06/08/2005 5:03:23 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300E175D0D6CAF21C47928E7FEBCA31A
9520000000079270000
ExpiryTime : 14/07/2014 1:00:00 AM
FolderPath : OFFLINE ADDRESS BOOK\/o=MY_ORGANIZATION/cn=addrl
ists/cn=oabs/cn=Default Offline Address List\OAB Version 2
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/07/2014 5:07:04 AM
LastModificationTime : 28/08/2008 11:50:24 PM
Name : OAB Version 2
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300E175D0D6CAF21C47928E7FEBCA31A
9520000000079270000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OAB Version 3a
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 06/08/2005 5:03:23 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300E175D0D6CAF21C47928E7FEBCA31A
9520000000079280000
ExpiryTime : 14/07/2014 1:00:00 AM
FolderPath : OFFLINE ADDRESS BOOK\/o=MY_ORGANIZATION/cn=addrl
ists/cn=oabs/cn=Default Offline Address List\OAB Version 3a
IsDeletePending : False
ItemCount : 17
LastAccessTime : 29/07/2014 5:07:04 AM
LastModificationTime : 27/08/2008 3:30:24 PM
Name : OAB Version 3a
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 821324B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300E175D0D6CAF21C47928E7FEBCA31A
9520000000079280000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OAB Version 4
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 17/12/2006 4:06:45 AM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE00000006C28B0000
ExpiryTime : 14/07/2014 1:00:00 AM
FolderPath : OFFLINE ADDRESS BOOK\/o=MY_ORGANIZATION/cn=addrl
ists/cn=oabs/cn=Default Offline Address List\OAB Version 4
IsDeletePending : False
ItemCount : 4
LastAccessTime : 29/07/2014 5:07:04 AM
LastModificationTime : 27/08/2008 3:30:25 PM
Name : OAB Version 4
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 667412B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE00000006C28B0000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : OWAScratchPad{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000190000
ExpiryTime :
FolderPath : OWAScratchPad{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
IsDeletePending : False
ItemCount : 0
LastAccessTime : 21/07/2014 2:42:30 PM
LastModificationTime : 27/08/2008 3:15:05 PM
Name : OWAScratchPad{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000190000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : schema-root
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000150000
ExpiryTime :
FolderPath : schema-root
IsDeletePending : False
ItemCount : 0
LastAccessTime : 12/08/2014 10:32:21 AM
LastModificationTime : 27/08/2008 3:30:26 PM
Name : schema-root
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000150000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : StoreEvents{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:51 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000110000
ExpiryTime :
FolderPath : StoreEvents{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
IsDeletePending : False
ItemCount : 0
LastAccessTime : 21/07/2014 2:42:30 PM
LastModificationTime : 27/08/2008 3:30:25 PM
Name : StoreEvents{BEE1FD0C-1F99-465E-9736-5E445BD9EBE1}
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300D93713B01F1B2D47ACEF7E4B5F2F2
9EE0000000000110000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Offline Address Book - /o=MY_ORGANIZATION/cn=add
rlists/cn=oabs/cn=Default Offline Address List
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 05/08/2005 4:25:34 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300109CB6B7A7C10441B115571996104
6DA0000000000080000
ExpiryTime :
FolderPath : OFFLINE ADDRESS BOOK\/o=MY_ORGANIZATION/cn=addrl
ists/cn=oabs/cn=Default Offline Address List
IsDeletePending : False
ItemCount : 0
LastAccessTime : 29/07/2014 1:00:00 AM
LastModificationTime : 27/08/2008 4:30:22 PM
Name : /o=MY_ORGANIZATION/cn=addrlists/cn=oabs/cn=Defau
lt Offline Address List
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300109CB6B7A7C10441B115571996104
6DA0000000000080000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca
AdminDisplayName : Internet Newsgroups
AssociatedItemCount : 0
ContactCount : 0
CreationTime : 22/08/2005 1:38:50 PM
DeletedItemCount : 0
EntryId : 000000001A447390AA6611CD9BC800AA002FC45A0300F020D914C926D011A40900C04FD7B
D87FFFFFFFF00030000
ExpiryTime : 06/08/2014 1:00:00 AM
FolderPath : Internet Newsgroups
IsDeletePending : False
ItemCount : 0
LastAccessTime : 22/07/2014 9:32:58 AM
LastModificationTime : 24/10/2012 1:08:21 PM
Name : Internet Newsgroups
OwnerCount : 0
TotalAssociatedItemSize : 0B
TotalDeletedItemSize : 0B
TotalItemSize : 0B
ServerName : EXSVR2007
StorageGroupName : Second Storage Group - Public Folders
DatabaseName : Public Folder Database - Public Folders
Identity : 000000001A447390AA6611CD9BC800AA002FC45A0300F020D914C926D011A40900C04FD7B
D87FFFFFFFF00030000
IsValid : True
OriginatingServer : EXSVR2007.mydomain.ca -
ActiveSync stops working after migrating from Exchange 2007 to Exchange 2013
We have started the migration from Exchange 2007 to Exchange 2013. We've followed best practices and everything is working great except ActiveSync. I've performed Exchange migrations in the past so this is nothing new for me. I've also been referring to
a great guide which has been a big help,
http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/planning-and-migrating-small-organization-exchange-2007-2013-part1.html.
Once a user is migrated from Exchange 2007 to 2013, ActiveSync stops working properly. Email can be pulled to the device (Nokia Lumia 625 running Windows Phone 8) by performing a manual sync. But DirectPush is not working. The strange part is it's not affecting
everyone who's been migrated. Anyone who is still on Exchange 2007 is not affected.
At first I thought it was our wildcard certificate. 99% of our users are running Outlook 2013 on Windows 7 or higher but we do have a few terminal servers still running Outlook 2010. Outlook 2010 was giving us certificate errors. I realized it was the wildcard
certificate. Rather than making changes to the OutlookProvider I simply obtained a new SAN certificate. Although that resolved the issues for Outlook 2010 users, ActiveSync was still a problem.
Rebooting the phones and removing the email account from the user's device and re-adding it didn't resolve the issue either.
Then I performed an iisreset on the CAS server. This didn't help either. I didn't know it at the time, but I was getting closer...
I tried using the cmdlet Test-ActiveSyncConnectivity but it gave me the following error:
WARNING: Test user 'extest_0d9a45b025374' isn't accessible, so this cmdlet won't be able to test Client Access server
connectivity.
Could not find or sign in with user DOMAIN.com\extest_0d9a45b025374. If this task is being run without
credentials, sign in as a Domain Administrator, and then run Scripts\new-TestCasConnectivityUser.ps1 to verify that
the user exists on Mailbox server EX02.DOMAIN.COM
I started reviewing how Exchange 2013 proxied information from the CAS to the mailbox server and realized the issue may in fact be on the mailbox server.
I performed an iisreset on the mailbox server and all of a sudden ActiveSync started working again. Awesome!
I can't explain why. The only thing I can assume is when some users were migrated from 2007 to 2013 something wasn't being triggered on the Exchange 2013 side. Resetting IIS resolved the issue. I guess I'll have to do an IIS reset after I perform a batch
of migrations. Disabling ActiveSync and re-enabling it for the affected users didn't help - only the IISRESET resolved the issue.
If anyone has any information as to why this happens, please chime in. Also, if anyone knows why I can't run the Test-ActiveSyncConnectivity cmdlet, I'd appreciate the help.
Thanks.Hi,
In Exchange 2013, the Public Folder is changed to Public Folder mailbox instead of Public Folder in Exchange 2007 database.
Due to the changes in how public folders are stored, legacy Exchange mailboxes are unable to access the public folder hierarchy on Exchange 2013 servers. However, user mailboxes on Exchange 2013 servers or Exchange Online can connect to legacy
public folders. Exchange 2013 public folders and legacy public folders can’t exist in your Exchange organization simultaneously. This effectively means that
there’s no coexistence between versions.
For this reason, it’s recommended that prior to migrating your public folders, you should
first migrate your all legacy mailboxes to Exchange 2013. For more information about migrating public folder from previous versions, please refer to:
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
(Please note the What do you need to know before you begin part in this link)
Regards,
Winnie Liang
TechNet Community Support -
Cross Forest Migration from Exchange 2007 to Exchange 2013
Hi
Could anybody advice me the steps also the pros and cons for below mentioned environment if we are going for the cross forest migration.
Source
Domain - test.local
Active Directory - Windows 2003
Exchange Server - 2007
Target
Domain - test.net
Active Directory - Windows 2012
Exchange Server - 2013
Also if it is possible ,
How could I remove the source environment including the exchange servers. after the migration ?
Regards
MuraleeHi Oliver ,
Please suggest us.
In my environment we are in a plan to migrate from exchange 2007 to exchange 2013 (cross forest migration).
Source : Exchange 2007 with sp3 ru 10
Target : Exchange 2013 with cu2 ( new environment yet to be created).
Trust : Forest trust in place (two way )
Domain and forest functional level : 2003 in both target and source
Migration Steps :
Step1 :
We are in a plan to execute 'preparemoverequest.ps1' first in the target forest ,so that we will get the disable MEU
in the target forest.
Step2:
Then we are going to use ADMT to migrate users SID'S and password .
Step3:
Then we are going to move the mailboxes with New-moverequest
Please have a look in to our steps and suggest us ,whether we are going to proceed the migration in a right way or not
.Is anything needs to be changed please intimate me .
Thanks
S.Nithyanandham
Hey there,
Sorry for taking a little while to get back to you, i've been busy working on Hosted Lync deployments!
Use ADMT first, then when using preparemoverequest.ps1 script using the -uselocalobject cmdlet. This will then tie it up to the ADMT migrated account.
More info in this thread here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/2916e931-36a0-4ba4-8c04-196dbe792b44/preparemoverequestps1-and-admt?forum=winserverMigration
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,MCITP:Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi -
Migrating from Exchange 2007 to exchange 2013 ( special case )
Hello ,
what is the BEST scenario ( fastest , most efficient , most secure in terms of data loss ) , to migrate from exchange 2007 ( one server , all exchange roles installed on this server , 1200 mailbox ) , to exchange 2013 ?
knowing my environment needs to be connected to their mailboxes , 24/7 !
it's very frustrating .
and i have no clue even if this is the right place to post about this , if not please refer me as to where to post .
Also , All my domain controllers are 2008 .It's fine to post your question here, and you are fine with Server 2008 Domain Controllers - that is a supported scenario.
If you haven't performed such an upgrade and you need to have 24/7 mailbox availability, I would seriously recommend you to duplicate the production environment on a test network and run through the upgrade at least once.
Most people neglect the Outlook clients requirements - they need to be updated and include several specific updates, which allow the automatic reconfiguration of internal clients. If you are preparing for this upgrade, you should be aware that all internal
Outlook clients switch to Outlook Anywhere. Clients that miss these updates will get connectivity problems.
Another common problem is the configuration of the Exchange URL - I mean the Exchange 2013 URL and the modified Exchange 2007 URL that will allow the co-existence. In your case, you definitely need to plan for co-existence - that includes requesting and
installing a new Exchange UCC (Multiple Domain Certificate) on both Exchange servers, configuring Split DNS (or preferably PinPoint DNS zones), and correct timing when replacing the existing Certificate on the Exchange 2007 server. Failure to configure the
correct URL (and it's quite easy to miss one, so triple check them) will get you in trouble.
Once you get through the switchover (switching the mail flow and Client Access through the Exchange 2013 server), move just a couple of test mailboxes and check the result.
Finally, if you are moving the Public Folders, make sure that the lock is really applied before you complete the process. Most people proceed right away and that get's the process stuck. If you can afford it (the mailboxes are already on the Exchange 2013
server at that point), just restart the Exchange 2007 server (after locking the Public Folders) and then complete the Public Folder migration.
Good Luck with the project!
Step by Step Screencasts and Video Tutorials -
Migration from Exchange 2007 to Exchange 2013
We are migrating from Exchange 2007 to Exchange 2013. We have a new Exchange 2013 server will all of the roles installed, but none of the mailboxes have even been moved yet. We are seeing some of our users getting prompted to accept the self signed certificate
on the exchange 2013 server. Exchange 2007 server is still handling all of the mail flow and connectors. Any reason why some of our users would be prompted with the certificate for the exchange 2013 server even though their mailbox is still on exchange 2007.
Our users are on outlook 2010.
Ed
EdHi,
Could you show us what is the prompt details?
According to your desciption,I recommend you refer to the following methods to troubleshoot:
1.Please check if outlook anywhere been configured to connect exchange 2013.
2.Ctrl+Right click outlook, use “Test E-mail AutoConfiguration” to check all the settings .
Thanks.
Niko Cheng
TechNet Community Support -
Can only access emails through OWA after migration from exchange 2007 to 2013
can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
How to migrate from exchange 2007 to 2013 step by step tutorials please
Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
ThanksExchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way. -
Migrating from Exchange 2007 to Exchange 2013 Public Folders coexistence
Hi all, I'm migrating from Exchange 2007 SP3 to Exchange 2013 SP1.
I have an Exchange 2007 server (Client Access, Hub Transport and Mailbox Server) in Site A, mailboxes and Publics Folders
In another Site in Site B, I have already installed (Client Access and Mailbox Server) Exchange 2013 server.
I am migrating test users, the fact is that users who migrated to Exchange Server 2013 Public folders do not see.
How I can make the migrated users from viewing the Exchange 2007 Public Folders duration coexistence?
Is there a "how to" to migrate Public Folders from Exchange 2007 to Exchange 2013?
thank you very much
Microsoft Certified IT Professional Server AdministratorHi,
In Exchange 2013, the Public Folder is changed to Public Folder mailbox instead of Public Folder in Exchange 2007 database.
Due to the changes in how public folders are stored, legacy Exchange mailboxes are unable to access the public folder hierarchy on Exchange 2013 servers. However, user mailboxes on Exchange 2013 servers or Exchange Online can connect to legacy
public folders. Exchange 2013 public folders and legacy public folders can’t exist in your Exchange organization simultaneously. This effectively means that
there’s no coexistence between versions.
For this reason, it’s recommended that prior to migrating your public folders, you should
first migrate your all legacy mailboxes to Exchange 2013. For more information about migrating public folder from previous versions, please refer to:
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
(Please note the What do you need to know before you begin part in this link)
Regards,
Winnie Liang
TechNet Community Support -
After Migrating from 10g to 11g Geeting problems with Guided navigations.
After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;" -
Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365
Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserverHi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
How to use/call .class file in jdeveloper
I have a .class file that is run as part of cron job on the UNIX server. It has three parameters - so the call goes something like this java exampleClass1 param1 param2 param3. I need to import it into my Jdeveloper project so it can be called from a
-
PDFs with password security will not open on Blackberry tablet
I'm a designer, pretty clued with everything Mac based. I put password security on PDFs sent out to clients to restrict editing, theft of images, maps, high resolution printing etc. However, they won't open on Blackberry tablets, if they do, they sh
-
OS X 10.5.8 upgrade to mountain lion
I'm running OS X 10.5.8 but want to upgrade to mountain lion. What are the steps I take?
-
Siebel Application Auto logoff
Hi, Siebel Application logoff, When we click custom button. Application Version: eCommunication 8.0 Thanks, Pandiarajan Edited by: user9522927 on Apr 16, 2010 3:02 AM
-
Why is AdobePDFViewer saying it cannot find a compatible reader?
It started to be occasional, but now every time I try to open a PDF from the internet I get the following message: "AdobePDFVIEWER cannot find a compatible Adobe Acrobat or Adobe Reader to view this PDF. Please select one." I have both Adobe Reader