Migrating from BE5k to CUCM 9.1 and Unity Connection 9.1 (not BE6k)

Hello,
We are starting to embark down the road of migrating from our BE5k system, to separated CUCM and Unity 9.1 systems on UCS Blades running ESXi.  I was wondering if there might be some documentation already existing on how we might accomplish this.  I have done upgrades in the past, and I'm sure there's a COP file or 3 that I need to install to make it all work properly.  I searched the Cisco site for such documents, but couldn't really find anything specific.
We'll also be migrating our Cisco Presence from the old MCS platform to the UCS ESXi setup as well.
Thanks for the help.
Cheers,
Mark

Thanks George,
That's the documentation for migrating to BE6k.  We are breaking away from the BE platform and doing full installs for CUCM and CUC.  Does the same article apply?
I suspected that the Presence would be that simple, but just wanted to make sure.
Thanks,
Mark

Similar Messages

  • CUCI-Lync 9.2 with CUCM 8.6 - Cisco Unity Connection Visual Voicemail Not Working

    Hi
    I have CUCM and CUC 8.6.2 running and MOC with CUCI-Lync 8.5 (with visual Voicemail) running OK with full registry configuration (see below). We are moving to Lync 2013 and want to use CUCI-Lync 9.2.
    A basic install of CUCI-Lync 9.2 works fine with CUCM (with manual setup of TFTP, CCMIP and CTI) but not with CUC. I can only call the VM Pilot but I don't get my visual voicemail.  In the CUCI-Lync  parameters I type in my CUC server IP adress and credentials but get a message saying that it can't connect.
    As the config guide describes a config with CUCM 9 (with UC services) which I don't have in V8.6.  I've tried using the old registry configuration or no registry configuration at all, I can't get CUCI-Lync to connect to CUC...
    Has anyone done this ? Any suggestions ?
    OLD REG Configuration:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Unified Communications\CUCIMOC]
    "RememberMe"=dword:00000001
    "AutoLogin"=dword:00000001
    [HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\AdminData]
    "TftpServer1"="1.1.1.1"
    "TftpServer2"="2.2.2.2"
    "TftpServer3"=""
    "UseCUCMGroupForCti"="1"
    "CcmcipServer1"="1.1.1.1"
    "CcmcipServer2"="2.2.2.2"
    "CcmcipServerValidation"="0"
    "CsfStatsServer"=""
    "CsfStatsCollectionEnabled"=""
    "EnableNativeDirectoryProvider"="1"
    "VoicemailPilotNumber"="12345"
    "VoiceMailService_UseCredentialsFrom"="PHONE"
    "VVM_SystemServer_0"="3.3.3.3"
    "VVM_SystemServer_1"="4.4.4.4"
    "VVM_SystemServer_VmwsProtocol_0"="HTTP"
    "VVM_SystemServer_VmwsProtocol_1"="HTTP"
    "VVM_SystemServer_VmwsPort_0"="80"
    "VVM_SystemServer_VmwsPort_1"="80"
    "VVM_Mailstore_Server_0"="3.3.3.3"
    "VVM_Mailstore_Server_1"="4.4.4.4"
    "VVM_Mailstore_ImapProtocol_0"=""
    "VVM_Mailstore_ImapProtocol_1"=""
    "VVM_Mailstore_ImapPort_0"="143"
    "VVM_Mailstore_ImapPort_1"="143"
    "VVM_Mailstore_InboxFolderName"=""
    "VVM_Mailstore_EncryptedConnection"=""
    "VVM_Mailstore_PollingInterval"=""
    "AutomaticDeviceSelectionMode"="0"
    "SSO_Enabled_CUCM"="false"
    "DeviceProviderServer1"="1.1.1.1"
    "DeviceProviderServer2"="2.2.2.2"
    "DeviceProviderServerValidation"="0"
    "DeviceProviderType"="CCMIP"

    The UC Services are a CUCM 9.0 feature. In 8.x these existed within CUPS under Applications > CUPC/Jabber > CTI Gateway and Profile. Other things that frequently cause this to break: 1) deskphone not associated to your end user object; 2) primary extension not set; 3) standard cti enabled and standard ccm end users group membership missing; 4) the IP/FQDN of the CTI Gateway is not a CUCM node running CTI Manager.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • BE5K to Virtual CUCM and Unity Connection 10.5(2)?

    Hi,
    I am migrating a CUCM and Unity Connection 8.6 from physical server to CUCM and Unity 10.5(2) and I estimate about 2-hour effort with PCD to migrate the CUCM to be ready for testing. Not sure about Unity Connection Part though. The physical server is serving 120 users with 3 remote locations(via MGCP) and complex integration with other systems. I only done greenfield deployment before...no migration/upgrade experience...
    Simple/not simple questions:
    1. Will the 2-hour be enough for CUCM?
    2. PCD doesnot seem support migration of Unity Connection to 10.5. What is the recommended approach? Gradually move data or cutover?
    3. From your experience, how long it takes for upgrading/migrating Unity Connection?
    I have these 2 documents from Cisco as my reference, any other recommendations?
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ucmapMigrate/10_5_1/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051_chapter_01.html
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug022.html

    Thanks for pointing it out. I did not realize BE5K is not supported by PCD.
    Will this be my next best bet then:
    Install version 8.6.2 VM in ESXi
    Export info using BAT from BE5K
    Import info into 8.6.2 VM on ESXi
    Upgrade the 8.6(2) VM to v10.5.x (via PCD I guess)
    Test then discconnect BE5K
    If I am correct, will 4-hour be enough?
    I also saw some other suggested to do in-software upgrade to 9.x than export... I just feel that is too risky...BE5K is already a single point of failure what happens if in-software upgrade failed...

  • HT4796 How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users?

    How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
    Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
    I just dont want to have to og in and out of 2 different accounts .. Help please.         
    -Nina

    Sorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
    So, in the Finder, select Computer from the Go menu.
    You'll see Macintosh HD, double-click that to open it.
    In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
    If you have any more confusion, please stop and ask. We'll get there.
    If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
    Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc.  That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
    Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
    A path that starts with ~/ means your Home folder, the one inside /Users named with your account name.

  • Have just migrated from the world of PC's. and I had my set up so that when I typed a new sentence it started with a capital with out me pressing shift. also, i could set up words to self fill like ur would auto correct to your. can this be done with mac

    Have just migrated from the world of PC's. and I had my mail text typing set up so that when I started  a new sentence after a full stop  it started with a capital with out me pressing shift. also, i could set up words to self fill like ur would auto correct to your. can this be done with mac

    I don't know about the first letter cap but the spelling is simple. Edit - Spelling and Grammar - Select While Typing and Correct Spelling Automatically.
    I'd also STRONGLY recommend that you bookmark and use:
    Mac 101
    Switch 101
    Find Out How Video tutorials
    List of Useful URLs for switchers
    Welcome to the Light side.

  • Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences

    can I interrupt a migration from Mac Book Pro to iMac and what are the consequences

    Les:
    Here are some options:
    • You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
    • You can use an application like Log Me In to access your home computer from your laptop.
    • You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
    Please do post back with further questions or comments.
    cornelius

  • I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

    I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process.  If I am attempting to download app updates before attempting to

    Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process.  If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage.  In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track.  Everything worked fine on Windows 7.  So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility.  As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries?  Does anyone have any suggestions?

    After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
    1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
    2) I tested a successful #sync from the iMac at work.
    So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
    So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

  • Migration from windows xp to windows 7 and refresh (reinstall windows 7)

    i have created windows xp to windows 7 migration task sequence but not working as expected plaese assit me migration from windows xp to windows 7 and refresh (reinstall windows 7 just reinstall windows 7 with out format so that i can retrieve my documents,
    desktop, profiles and Complete C drive with installation application)

    This question is way too general, sccm ghost. Why is it not working? What is (not) happening? What does smsts.log tell? How are you trying to migrate data?
    Torsten Meringer | http://www.mssccmfaq.de

  • Can someone help me... I tried to purchase something from a game clash of clans and its says purchase can not be completed... Please contact iTunes...

    Can someone help me... I tried to purchase something from a game clash of clans and its says purchase can not be completed... Please contact iTunes...

    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (most of us on these forums are fellow users, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hello..when I download attachments from any email..iPages opens and says some features are not supported and cuts out photos and lengthens my attachments

    hello..when I download attachments from any email..iPages opens and says some features are not supported and cuts out photos and lengthens my attachments

    What format are the attachments? If Pages will not display them properly you will need an application that does. Pages usually opens word documents but can give problems at times, if they are MS Word documents, try Libre Office or failing that you may have to purchase MS Word for Mac, maybe you will need to buy the complete Office suite.
    The other possiblity is that you already have a suitable application and Pages is loading the file by default, if so change the default application to open that file type.

  • How best to migrate from MacPro to iMac w/ SSD and extrenal drives

    Currently I have a MacPro with 4 drives - 3 1TB and 1 2Tb, the 2TB drive is my main hard drive, so it has system, apps, documents, itunes etc....and it has been upgraded and migrated from one computer to the next as long as apple has had the ability to do so (and before that by moving over targeted drive manually). I currently am running 10.6.8 on the machine. I have ordered a new iMac w/ an internal 512gb SSD drive, and after speaking with an Apple rep, I got a THunderbolt enclosure to house my current 4 hard drives. Now my question is how best to get my preferences etc into the new computer w/o dragging along all the old stuff...(ie old apps not compatible w/ Mountain Lion, old system folders, etc). Here is what I would like to do:
    1. setup SSD with OS, fresh installs of Apps, and my fonts (i am a designer and i have a gazillion fonts and they always take way to long to load into my font app).
    2. I would like my 2TB drive to eventually just include my home directory where all my files, and such will be stored. But I would like to keep the drive as is to make sure everything is working just in case, I dont want to have any down time during the upgrade process (ie if a client calls me and needs something while I am still setting up I could boot off the 2tb drive and work). But after all is working properly then I would like to make it just the home directory and main place for all files etc
    3. My remaining 3 drives are broken up for manual backups of my work on 2 of the drives, and then photos and mp3s on one, and movies and tv shows from itunes on the other. I dont currently run Time Machine or Retrospect or RAID....
    I see most people saying to create 2 admin accounts, one that would stay on the SSD drive and the other which could be mapped to the 2TB drive and have its home directory there...but what do I do about moving preferences etc? is there a way when setting up that will let me import my current account and let me keep it on the external drive as is? should i move the files that i want to keep off the 2tb drive, wipe it to get rid of the old apps and system and then put back the home directory??I don't want to run into trouble with permissions, and I really dont even want to create 2 accounts because I hate having to close everything and log out for simple installs and updates...i have 2 on my macbook pro now and i run into errors all the time of i cant update this or that because of admin account...even though both accounts are set as admin.
    I want to keep the whole upgrade simple, but I would like to keep this fresh system clean as  am sure there is way to much left over garbage from upgrades past. So just not sure how best to do any of it.....

    I purchased the DataTale RS-M4t SMART 4-Bay Thunderbolt RAID storage enclosure. But it can do both RAID if you get their data manager software download, or it can just mount the drives and be used normally. So basically I can plug all 4 of my current drives into it...and it into my iMac and it will be same as if I had it in my tower....so really not moving over a ton of stuff. I will load all apps fresh onto the brand new iMac - so the SSD will be a clean install...my worries are trying to get access to home directories etc on the current main drive and have things get setup correctly, keychains, bookmarks, etc...as well as my iTunes which has iPad and iPhone backups, etc. I am just not sure as how to best setup the SSD to get the most of its speed while being able to get my current account working but on the second external drive.

  • Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

    Hello,
    Currently we are in the midst of migrating all of our report for one of our main application from CR 9 to CR11 R2. The entire migrating, importing, as well as publishing for tall the report runs smoothly. We even can view the report once we called up the report from the repository to be displayed in its infoview. But my question is:
    1. Is there any way that the report can auto adjust its size once the report been print out? This is because I believe in CR 9, ( we are using RAS9 btw) once printe out; the report will be automatically adjusted, different than the CR 11 which is WYSWYG. This has caused some of the report layout been out-of-margin as well font sizing are not the same anymore (sometimes big and sometimes too small) and not the same as per old (CR 9 version) report.
    With this explanation, it is hope you guys or any of your team can give me some solution or advice on how for me to cater this problem.
    2. Another thing that I need to clarify with you guys is does CR 11 being supported by Printronix 5000 series of printer? This is because when the same title report when being generated from CR 9 and CR 11 both will come out in a different output/ result.
    CR 9 is a readable but yet in CR 11 which I believe is a WYSWYG Windows Generic Text driver report application wonu2019t be able to print out nicely as some of the font is smudge and not readable. If this is the case, I need a clarification from you guys as whether the printer is being supported or not?

    Hi Daniel,
    Where are you seeing the differences,  in Crystal Reports or through BusinessObjects Enterprise?  If it's from BOE,  make sure you have the Printronix printer driver installed on the Page Server machine,  and that the Page Server service is running under a domain account that has local admin rights.
    Regards,
    Wallie

  • Cisco Unity Connection 8.6 not getting CLID information from CUCM 8.6

    Hello,
    Currently Running:
    Cisco Unified Communications Manager 8.6.2
    Cisco Unity Connection 8.6.2
    Problem:
    when any outside caller leaves a voicemail, the caller number information is not being sent to unity.
    example, I call with my cell phone, 817.555.1234 to my Cisco 7940 phone and it shows the CLID information that i am calling with. iDivert to voice mail, Leave a message. Playback message and just the default message information from Cisco Unity.
    we currently upgraded from CUCM 6.1.3 and Unity 5. before i could press 9 and get the caller information.
    I have viewed the "Playback Message Settings" and selected "After Playing Each Message, Play" and selected Sender's Information. and also selected "Include Extension and Sender's ANI"
    upon playing the VoiceMail after the message i get the default message "From Cisco Unity Connection Messaging System"
    I also have the message relaying to my E-mail and I get the same in the subject line.
    "Message from Cisco Unity Connection Messaging System (Unknown extension)"
    This tends to be a big deal with the Sales team as customers will call and say "Call me back"
    But any Internal Calls show the correct information, proper greeting, extension information even on the relay to e-mail.
    Any help will be appreciated.
    Thanks
    Tim

    Found another post that referenced Cisco Bug ID CSCti37610.
    CUC plays message is from Unity Connection Messaging system
    Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
    Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
    Workaround:
    Restart the Unity Connection servers
    It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

  • Migrating from Macbook to Macbook Pro - is OS X 10.5.8 not update enough to do it?

    I'm trying to migrate to my new Macbook Pro from my Macbook but it says my Macbook isn't running the latest version of OS X. I've run the updates and it's 10.5.8 but it's still coming up with the same advice box on the Pro. Any tips?

    If you have a pile of older applications that may not run in the latest
    OS X, you may want to set up the new MacBook/Pro model without
    changing the OS X version in the old MacBook running 10.5.8.
    Any MacBook which did not ship with Snow Leopard 10.6(.8) included
    can be upgraded to that OS X by use of retail DVD, then update the
    installed Snow Leopard by use of download update file to the 10.6.8.
    This would be from Software Updates run in the computer; or from a
    link at Apple Support download servers. The DVD cost about $20.
    •Mac OS X 10.6 Snow Leopard DVD retail:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    • Mac OS X 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    And this may be the best last step for several early MacBook models
    that may otherwise do OK in Lion 10.7.5 or maybe Mt Lion 10.8.5.
    The abillity to upgrade an OS X depends on the vintage of hardware
    as minimum qualifications or specifications should be met or exceeded.
    {Further upgrades to OS X would require using the Mac App Store and
    other online stores only available in Snow Leopard 10.6.8 & Later.}
    This means RAM upgrade, new chips of quality standard tested on Macs
    and more than a suggested minimum amount of RAM installed so the OS
    along with applications can work actively without an issue due to this factor.
    You could try using the migration assistant after after setting up the new
    MacBook/Pro and avoid choosing to attempt to modify the new system
    on set up; see instructions in Time Machine where you can migrate from
    an external hard drive or other Mac. You can also migrate some items
    from Time Machine. I've tried to only use external drives & system clones
    so have no experience with the Time Machine or Time Capsule products.
    Good luck & happy computing!

Maybe you are looking for