Migrating from BOXI R2 to R3 - Need URL information for CreateNew/Modify.

Hi,
Ours is a web application deployed on websphere and we connect to business objects from the application for reporting.
We are using BOXIR2 and are in process of migrating to BO XI R3.
Within our application we have the functionality to create,edit adhoc reports on business objects.
For this in R2 we are using the following urls.
To create new adhoc report --
http://machinename:portnumber/businessobjects/enterprise115/desktoplaunch/InfoView/CrystalEnterprise_Webi/new.do
To modify adhoc report -- http://machinename:portnumber/businessobjects/enterprise115/desktoplaunch/InfoView/CrystalEnterprise_Webi/modify.do
These URLs do not work in R3.
We are looking out for the corresponding urls to be used in R3 for the above functionality to work.
Any help will be appreciated.
Thank You.

You will need to figure those out on your own (or if you are lucky someone else on the forum has already done it and will post).
Essentially we do not have those urls documented and to access those pages you should be going through Infoview itself and not directly to them.
Good luck,
Jason

Similar Messages

Why do i need payment informations for free games

why do I need payment information for free games?

You can create an iTunes account without payment info on file.
Once you have a card on file, though, iTunes wants it to be current/valid. Don't think there's any way around it.

Migrating from iMac CD to MBPC2D - Need Help with the FIle Migration

I just ordered a refurb 2.4 MacBook Pro, which will replace my iMac Core Duo as my main machine. The iMac is running Tiger. I've decided that I only am concerned with migrating the following information from the iMac, and want some help on the best way to do this (paths/locations would be helpful too):
-iPhone backups - to ensure my iPhone doesn't get wiped when it syncs. I will want to copy the last backup over to the MBP.
-All iTunes Music and Movies
I will then manually re-install VirusBarrier x4, MS Office, etc. I think this is better than trying to migrate everything over. What do you think?
Edit: I also have a FireWire external hard-drive available to assist with this.
Thanks
Message was edited by: Azeroth

Folders You Can Move to Your new Mac
From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications, iTunes, iCal, Address Book, Safari.
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
For FireFox:
/Home/Library/Applications Support/FireFox
/Home/Library/Preferences/org.mozilla.firefox.plist
Credit goes to another forum user for this information.
Read the following about moving iTunes: iTunes- About Music Store authorization and deauthorization.

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

I need the information for migrate businessobjects old version to xi R3

Dear All,
                  i need the information about migration for businessobjects old version to BO XI R3
                                            Thankyou,

Hi Gopal,
What is the version of the existing BOE which you are using?
Please find the link to download the Admin guide:
-Please go to Http://help.sap.com
-Click on BusinessObjects tab
-Select the product as BusinessObjects Enterprise.
-You will find some useful guides to download.
However you can find the steps to perform migration as follows:
u2022     Create a Back-Up of CMS database(System and Audit) of the existing system.
u2022     Create a Back_Up of "FileStore" folder located at ..\Business Objects\Business Objects 11.5\"
u2022     Create a Back_Up of complete registry.
u2022     If the Business Objects system is customized for AD authentication,SSO etc., create a Back-Up of files on which changes are made.
u2022     If there are any Service Packs or Fix Packs installed, uninstall them in the reverse sequence of version.
u2022     Uninstall the base install of Business Objects Xi Release 2.
u2022     Clean all the registry entries for previous install of Business Objects.
u2022     Restart the computer.
u2022     Create two new Databases, one for CMS System database and one for CMS Audit database.
u2022     Create two new DSN's under ODBC configuration to point to the new Databases.
u2022     Install Business Objects XI 3.1 and while installing point the CMS to the new databases.
u2022     When the installation completes, stop the Server Intelligence Agent(SIA).
u2022     Right click and open the properties of SIA.
u2022     On the settings of CMS System database configuration, click specify.
u2022     Use "Copy from another Data Source" to migrate data from previous database to new database.
u2022     If the SIA fails to start, create another SIA and point it to the new Database with the migrated database.
u2022     Click on update objects and then start the SIA.
u2022     Login to "Central Management Console(CMC)" using Enterprise "Administrator" account.
u2022     Verify the License of Business Objects XI 3.1.
u2022     If the servers are showing disabled under CMC, enable all the servers.
u2022     Restore the "FileStore" folder to location "..\Business Objects\Business Objects Enterprise 12.0\".
u2022     If any report is missing database credentials, provide them and the reports will run ok.
These steps are for the BOE XIR2 and BOE XIR3. However you can also be useful for too.
I hope this helps you.
Regards,
Prashant

Migrating from 3.1 to 3.7 - write through for a custom cache store issues

We're migrating from 3.1 to 3.7. So far the migration and testing has been fairly uneventful, but there is one issue that came up yesterday that seems like it is going to be tricky to debug.
We have a set of storage-enabled nodes that use a custom CacheStore to read from and write behind to a mongo database. On another node connected to that caching service, read throughs work just fine. (I can set breakpoints on the CacheStore load method and see the load calls coming through just fine) - but what's not working is when the other node does a Cache.put - the Store method on the CacheStore is never called and so far I don't see anything in the logs indicating there is a problem on either side (I'm going to make sure that the coherence logging is up to the highest level on both the nodes today when I'm doing more testing)
I can see the cache put start to dive into the coherence jar, but I don't have source jars for coherence so it's fairly opague what might be going wrong after the Cache.put(object, object) call. I can see that it dives into various coherence methods, but
Any ideas on where to start debugging this?
This setup worked fine on 3.1, and as best we can tell all the API calls were converted over to their proper coherence 3.7 versions, and the coherence.xml files were migrated to use the new xsd etc.

it seems that the issue might be related to this:
2012-08-15 14:19:34.086 Tangosol Coherence 3.7.1.5 <Error> (thread=WriteBehindThread:CacheStoreWrapper(com.foo.cache.MongoCacheStore):Foo.com-CMS, member=13): Failed to store key="assetId=DEFAULT;assetStyle=DEFAULT;initial=c;siteId=foosite;"
2012-08-15 14:19:34.087 Tangosol Coherence 3.7.1.5 <Error> (thread=WriteBehindThread:CacheStoreWrapper(com.foo.configrepo.cache.MongoCacheStore):Foo.com-CMS, member=13): (Wrapped) java.io.StreamCorruptedException: invalid type: 13
     at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:266)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ConverterFromBinary.convert(PartitionedCache.CDB:4)
     at com.tangosol.net.cache.BackingMapBinaryEntry.getValue(BackingMapBinaryEntry.java:124)
     at com.tangosol.net.cache.ReadWriteBackingMap$CacheStoreWrapper.storeInternal(ReadWriteBackingMap.java:5731)
     at com.tangosol.net.cache.ReadWriteBackingMap$StoreWrapper.store(ReadWriteBackingMap.java:4814)
     at com.tangosol.net.cache.ReadWriteBackingMap$WriteThread.run(ReadWriteBackingMap.java:4217)
     at com.tangosol.util.Daemon$DaemonWorker.run(Daemon.java:803)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.StreamCorruptedException: invalid type: 13
     at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2303)
     at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2746)
     at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:262)
     ... 7 moreLooks like it is an issue with the serialization? We're primarily using XmlBean, not POF for serialization.
Any tips on troubleshooting this?
Edited by: RyanGardner on Aug 15, 2012 7:37 AM
Edited by: RyanGardner on Aug 15, 2012 7:38 AM

Need PDF Information for large files

Hi experts,
I need some information from you regarding PDF related.
is there any newer adobe version for large files support - over 15mb, over 30 pages.
is it possible Batch technology with PDF
if not please suggest me Possible adobe replacements.
Thanks
Kishore

Thanks so long.
acroread renders the pages very fast. That's what i want - but it's proprietary:/
For the moment it's ok but i'd like to have a free alternative to acroread that shows the pages as quick as acroread or preloads more than 1 page.
lucke wrote:Perhaps, just perhaps it'd work better if you copied it to tmpfs and read from there?
I've tried it: no improvement.
Edit: tried Sumatra: an improvement compared to Okular etc. Thanks.
Last edited by oneway (2009-05-12 21:50:10)

Need more information for ADT

Hi Guys,
I need more information about ADT. I am new to ADT.So will u plz provide the docs related ADT?
Thanks in advance.
Best Regards,
Purna.

It is good mobo , unless unscheduled (my)problem (bad sata cables) ALL is fine!
Recommendation.

Need table information for Business process ID and Business process status

Hi Guys/Sap,
I need PI table for business process ID(BPM) and Business process status table .Kind if any one know help me out .
I have checked blog but ia could only fine basic tables .
https://wiki.sdn.sap.com/wiki/display/XI/Useful%20ABAP%20tables%20in%20SAP%20XI.
Regards,
Sriram

Hi Sriram,
Search SE11 for SWF* tables.
Regards,
Ravi

Need API information for Inter Org Transfer

We are currently developing a form to perform inter-org transfer, we could nt customize the standard to our needs.
What are tables affected in this process? I believe MTL_MATERIAL_TRANSACTIONS_TEMP will be one of the tables to be populated. Is there any API for the same?.
Any pointers would be of great help.
Thanks
Balaji

For any sort of material transfer transactions you need to do.
The best way is to populate your interface table.
There are various tables for material transfer.
1.)MTL_TRANSACTIONS_INTERFACE
MTL_TRANSACTION_LOTS_INTERFACE --- only for lot control
Provide the lot information for material transaction interface if inserted in 1.
MTL_SERIAL_NUMBERS_INTERFACE----only if serial control is also there.
Provide the serial information for material transaction interface if inserted in 1.
No need to touch any temp tables. They are autopopulated as a result of your interface tables.
By the process you are goin gto run thereafter.
Baiscally after this you can run following concurrent program
Process transaction interface

Need contact information for AT&T Office of the President/Escalation Department.

I require contact information for your Office of the President/Escalation Department. I am the victim of faulty phone service for a year and it needs to be escalated. My account should be credited for loss of service (landline/internet). Actually it may need to be forward to my state attorney general, because I think is purposely not being solved.

Actually, you can go to the corporate site and read the filings they make to the securities and exchange commision.Public Information, and all the bosses are named, with contact addresses.Just google it.. it's out there.

Lessons Learned Migrating from BOXI R1 to BOXI R2

Post Author: tmiller
CA Forum: Deployment
Some notes from our upgrade from Release 1 to Release 2 to, hopefully, prevent headaches in other users:
Make sure you have your Release 2 license keys, Release 1 keys won't work (check with your vendor if you are an OEM purchaser)
Make sure you have notes on all your server configurations, including which Destinations are enabled (and their configurations) for the Job Server. Screen shots are a big help here.
If you are an OEM user, you have to install at least SP2 (which requires SP1 be installed first) or your licensing will be, uh, how to put it delicately, invalid
During upgrade, add your license keys in the console BEFORE doing the datasource upgrade.
If you are upgrading in-place, what worked best for us was to restore our pre-upgrade backup of the CMS database (we use SQL Server) to a new database and import from there to the bobjecms database. You also need to have a different ODBC DSN setup for each of these databases.
Once your datasource import is done, make sure you run the UPDATE OBJECTS process from the Central Configuration Manager, otherwise, you'll get an error if you use Windows AD authentication: Error retrieving info for Windows AD authentication: Unable to get SI_SSO_VENDOR property value. (Windows AD authentication won't work, you'll get this error when trying to configure it through CMS).
Enable servers that you noted in step 2
You'll need to update Crystal Reports for your report developers to Release 2, also - especially if you use Windows AD authentication. Do a COMPLETE UNINSTALL of Crystal Reports release 1, reboot, and then install a fresh Release 2. If you don't uninstall R1, you will most likely have an annoying "Please wait while Windows configures Crystal Reports XI Release 2" window every time you load Crystal or any VB developed app or Visual Studio 2005. This might be limited to only clients with VS 2005 installed, but might notu2026
Those were the major (and minor) hurdles we had to clear to get this upgrade done correctly u2013 and this is also an excellent example of why we have a test and a production server.
Hope this helps someone else out there.
- Tom

Post Author: TAZ
CA Forum: Deployment
Hi Tom,
Great notes, I'd like to add a few details that many people don't know as well.
1) Many times an upgrade from XIR1 to XIR2 will not be possible. This due to complexities in the DB structure that just don't migrate properly. In these cases there will be many errors during the CMS DB copy stage and the update objetcs stage. If this is the case then you must "migrate" via import wizard instead of "upgrading".
2) I know you mentioned that you were working off a backup of the original XIR1 CMS DB, but I'd like to add in NO circumstances should this be attempted against a live CMS production DB. If it is most likely your production server will go down and the upgrade will fail. This is due to tables being locked while the CMS copy utiltiy is trying to migrate them.
3) Regarding Crystal XIR1: You can still keep CRR1 but if you have AD or LDAP auth you will need to patch the client with the Server's SP3 or later.
4) Also to note CRX1 should NEVER be installed on an existing XIR2 server. CRXIR2 is available for download for free via ESD and will use existing CRXI keycodes.
Regards,
Tim

Can't get docs migrated from oldest TM backup/ but need them

I recently reformatted my imac but had not only done a complete backup onto time machne but had previous backups to time machine as well.
My most recent backups however, for whatever reason do no include alot of the old docs, and files...I was able to reconstruct my most recent files, docs, etc from using the migration assistant from the TM, but I really need the other files from the external TM as well. I am planning to RAID that drive with another and need to reformat that TM drive before RAIDing them. How can I get those old docs, etc to go over to my mac and not over-ride the stuff that is already there? Plus, I cannot seem to get those files over to the mac anyway! (A lot of this stuff are things I need for work and school)
imac intel core2 duo, 2008 OSX 10.8.5
macbook pro 15" mid 2010 OSX 10.8.5

.

SAP Data Storage Migration from HP EVA SAN to NetApp FAS3070 FMC for M5000s

Good day all
We are needing to perform a storage migration for SAP Data that is currently on 2 HP EVA SANs. We have 2 SUN M5000s, 2 SUN E2900s and a couple of V490s, that all connect to the SAN via Cisco 9506 Directors. We have recently commissioned a NetApp Fabric Metrocluster on 2 FAS 3070s, and need to move our SAP Data from the EVAs to the new Metrocluster. Our SUN boxes are running Solaris 10. It was suggested that we use LVM to move the data, but I have no knowledge when it comes to Solaris.
I have some questions, which I hope someone can assist me in answering:
- Can we perform a live transfer of this data with low risk, using LVM? (Non-disruptive migration of 11Tb)
- Is LVM a wise choice for this task? We have Replicator X too, but have had challenges using it on another Metrocluster.
- I would like to migrate our Sandbox, as a test migration (1.5Tb), and to judge the speed of the data migration. Then move all DEV and QA boxes across, before Production data. There are multiple zones on the hardware mentioned above. Is there no simple way of cloning data from the HP to the NetApp, and then re-synching before going live on the new system?
- Would it be best to have LUNs created with the same volume on the new SAN as the HP EVA sizings, or is it equally simple to create "Best Practise" sized LUNs on the other side before copying data across? Hard to believe it would be equally simple, but we would like to size the LUNs properly.
Please assist, I can get further answers, if there are any questions in this regard.

Good day all
We are needing to perform a storage migration for SAP Data that is currently on 2 HP EVA SANs. We have 2 SUN M5000s, 2 SUN E2900s and a couple of V490s, that all connect to the SAN via Cisco 9506 Directors. We have recently commissioned a NetApp Fabric Metrocluster on 2 FAS 3070s, and need to move our SAP Data from the EVAs to the new Metrocluster. Our SUN boxes are running Solaris 10. It was suggested that we use LVM to move the data, but I have no knowledge when it comes to Solaris.
I have some questions, which I hope someone can assist me in answering:
- Can we perform a live transfer of this data with low risk, using LVM? (Non-disruptive migration of 11Tb)
- Is LVM a wise choice for this task? We have Replicator X too, but have had challenges using it on another Metrocluster.
- I would like to migrate our Sandbox, as a test migration (1.5Tb), and to judge the speed of the data migration. Then move all DEV and QA boxes across, before Production data. There are multiple zones on the hardware mentioned above. Is there no simple way of cloning data from the HP to the NetApp, and then re-synching before going live on the new system?
- Would it be best to have LUNs created with the same volume on the new SAN as the HP EVA sizings, or is it equally simple to create "Best Practise" sized LUNs on the other side before copying data across? Hard to believe it would be equally simple, but we would like to size the LUNs properly.
Please assist, I can get further answers, if there are any questions in this regard.

Migrate from File Server Shared Drives to Document Libraries, while Keeping Modified and Created Date

I am doing some file migration for a client, using SharePoint 2013 on prem.
Whether copying files from a local or network drive, to a Document Library, or from Document Library to other Document Library, I want the option of
preserving file dates and created/modified by fields.
I am developing a pretty cool tool in Excel to analyze files and directory names for restricted characters, large file sizes, and long path names...and then
it generates copy commands or rename commands as desired. I will share this with you if you like. This little glitch is the last remaining barrier.
Can we copy and retain Modified/Created Data and time? Can I do this using xcopy or robocopy or do I need to use powershell, ShareGate, or some other tool?
I have tried Windows Explorer drag-n-drop, "robocopy /COPY:DAT" and "xcopy /k"
and these seem to work great in th CMD window until you display the resulting files in SharePoint...and the modified date shows as now and modified by
shows as me.
Any suggestions you can provide are most welcome.

Hi Gerry,
try content matrix it gives you free 25 GB and it keeps metadata
http://www.metalogix.com/Products/Content-Matrix/Features.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Migrating from BOXI R2 to R3 - Need URL information for CreateNew/Modify.

Similar Messages

Maybe you are looking for