Migrating from Cisco 4402 to 5508 - AP Compatibility

We currently run six 4402 Wireless lan controllers - these are managed by a WCS server - soon to be replaced by Cisco Prime.
We run a mixture of LAP1242 and LAP1142 wireless access points.
I need to add more but have been told by my supplier that the both these AP's are now end of sale and cannot be purchased.
The replacement AP's are the 2600 series - but I have been told that these are not compatible with my existing 4402 controllers.
To make matters worse I was then advised that if I purchase the new 5580 controllers the older LAP1242 access points will not work with it and require replacing - this, for me, is a lot of access points.
What I need to know is:
What access points, if any, are currently available that are compatible with my 4402 controllers and a future 5508 installation?
I ssem to be in a situation now where I cannot buy any access points that will work with my 4402's but if I upgrade all my current 1242's will not funtion with the new 5508 controller!
Scott

Please look at the compatibility matrix of WLC release and AP's support (it is base on Controller software release)
Software Support for Access Points
Access Points
First Support
Last Support
1000 Series
AIR-AP1010
3.0.100.0
4.2.209.0
AIR-AP1020
3.0.100.0
4.2.209.0
AIR-AP1030
3.0.100.0
4.2.209.0
Airespace AS1200
4.0
AIR-LAP1041N
7.0.98.0
AIR-LAP1042N
7.0.98.0
1100 Series
AIR-LAP1121
4.0.155.0
7.0.x
1130 Series
AIR-LAP1131
3.1.59.24
1140 Series
AIR-LAP1141N
5.2.157.0
AIR-LAP1142N
5.2.157.0
1220 Series
AIR-AP1220A
3.1.59.24
7.0.x
AIR-AP1220B
3.1.59.24
7.0.x
1230 Series
AIR-AP1230A
3.1.59.24
7.0.x
AIR-AP1230B
3.1.59.24
7.0.x
AIR-LAP1231G
3.1.59.24
7.0.x
AIR-LAP1232AG
3.1.59.24
7.0.x
1240 Series
AIR-LAP1242G
3.1.59.24
AIR-LAP1242AG
3.1.59.24
1250 Series
AIR-LAP1250
4.2.61.0
AIR-LAP1252G
4.2.61.0
AIR-LAP1252AG
4.2.61.0
1260 Series
AIR-LAP1261N
7.0.116.0
AIR-LAP1262N
7.0.98.0
1300 Series
AIR-BR1310G
4.0.155.0
7.0.x
1400 Series
Standalone Only
1600 Series
AIR-CAP1602I-x-K9
7.4.100.0
AIR-CAP1602I-xK910
7.4.100.0
AIR-SAP1602I-x-K9
7.4.100.0
AIR-SAP1602I-xK9-5
7.4.100.0
AIR-CAP1602E-x-K9
7.4.100.0
AIR-SAP1602E-xK9-5
7.4.100.0
AP801
ap801-k9w7-tar
5.1.151.0
2600 Series
AIR-CAP2602I-x-K9
7.2.110.0
AIR-CAP2602I-xK910
7.2.110.0
AIR-SAP2602I-x-K9
7.2.110.0
AIR-SAP2602I-x-K95
7.2.110.0
AIR-CAP2602E-x-K9
7.2.110.0
AIR-CAP2602E-xK910
7.2.110.0
AIR-SAP2602E-x-K9
7.2.110.0
AIR-SAP2602E-x-K95
7.2.110.0
3500 Series
AIR-CAP3501E
7.0.98.0
AIR-CAP3501I
7.0.98.0
AIR-CAP3502E
7.0.98.0
AIR-CAP3502I
7.0.98.0
AIR-CAP3502P
7.0.116.0
3600 Series
AIR-CAP3602I-x-K9
7.1.91.0
AIR-CAP3602I-xK910
7.1.91.0
AIR-CAP3602E-x-K9
7.1.91.0
AIR-CAP3602E-xK910
7.1.91.0
600 Series
AIR-OEAP602I
7.0.116.0
Note The Cisco 3600 Access Point was introduced in 7.1.91.0. If your network deployment uses Cisco 3600 Access Points with release 7.1.91.0, we highly recommend that you upgrade to 7.2.103.0 or a later release.
1500 Mesh Series
AIR-LAP-1505
3.1.59.24
4.2.207.54M
AIR-LAP-1510
3.1.59.24
4.2.207.54M
1520 Mesh Series
AIR-LAP1522AG
-A and N: 4.1.190.1 or 5.2 or later1
All other reg. domains: 4.1.191.24M or 5.2 or later1
AIR-LAP1522HZ
-A and N: 4.1.190.1 or 5.2 or later1
All other reg. domains: 4.1.191.24M or 5.2 or later1
AIR-LAP1522PC
-A and N: 4.1.190.1 or 5.2 or later1
All other reg. domains: 4.1.191.24M or 5.2 or later1
AIR-LAP1522CM
7.0.116.0 or later.
AIR-LAP1524SB
-A, C and N: 6.0 or later
All other reg. domains: 7.0.116.0 or later.
AIR-LAP1524PS
-A: 4.1.192.22M or 5.2 or later1
1550
AIR-CAP1552I-x-K9
7.0.116.0
AIR-CAP1552E-x-K9
7.0.116.0
AIR-CAP1552C-x-K9
7.0.116.0
AIR-CAP1552H-x-K9
7.0.116.0
AIR-CAP1552CU-x-K9
7.3.101.0
AIR-CAP1552EU-x-K9
7.3.101.0
1552S
AIR-CAP1552SA-x-K9
7.0.220.0
AIR-CAP1552SD-x-K9
7.0.220.0

Similar Messages

Migration from WLC 4402 to 5508

Hello Forum;
I'm trying to migrate from a WLC 4402 to a 5508. I've uploaded the config from the 4402 and then downloaded it to the 5508. I'm able to get to the GUI but my clients are unable to connect. I've tried pinging from the clients with no luck. The APs connect to the 5508. I noticed that the ap-manager interface is not available for the 5508.
Has anyone had similar issues?
Sean

Yes its expected, coz we do not have AP manager on the 5508 WLC.. Clients are unable to connect is the concern..
Whats the WLAN?? are they enabled?? if yes, then when the client tries to connect, then wats the Policy manager state they get stuck in?? can u please run the below debug and paste it here??
debug client
Looking forward to hear from you!!
Regards
Surendra

Migrating from Cisco Unity Express to Cisco Unity Connection

Hello,
We are going to migrate from Cisco Unity Express 8.6.6 to Cisco Unity Connection 9.1.2. Therefore, we need to migrate all mailboxes without data lost.
So, the questions are next: is it possible? Which tools we should use and what steps we need to pass?
Thanks,

Based on my experience of keeping the data (i.e. voicemails for users) it is really not worth it.
Because all these voicemails will add up the Mailbox Space and user will get unnecessary "mailbox full" warnings even though they may be deleted (it takes around 2 weeks to get rid of the deleted voicemails)
Hence, my recommendation would be to do a stare and compare for the most part and build all the Call Handlers etc, this will give you even better chance to get rid of all the unwanted stuff.
HTH

[SOLVED]Failure of the ZBF migration from cisco 2811 ios 12.4/K9 to 1941 ios 15/k9

Hello to everyone,
I write because I have decided to pass from a cisco 2811 with ios 12.4/k9 to a cisco 1941 ios 15/k9, migrating configuration I have a problem with the ZBF.
I do not know if it's a problem of policy or differences between ios.
Could someone help me please?
Thank you all in advance
Regards,
Salvatore
Update: Configuration modified and IOS upgrade.

Salvatore,
I don't know what problem exactly you face with your ZBF, but this may help you trbouleshooting your ZBF.
http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note09186a0080a63b94.shtml
Thanks!

Migrating from Cisco Prime Unified Provisioning Manager 9.0 BE to Prime Collaboration 9.0 Provisioning

Hi All,
    Cisco BE 6000 9.X support both Cisco Prime Unified Provisioning Manager 9.0 BE and Prime Collaboration 9.0 Provisioning as its management tool. OVA for both applications are pre-loaded on server from factory starting end of March 2013.
    For some customers that start with Cisco Prime Unified Provisioning Manager 9.0 BE, and want to migrate to Prime Collaboration 9.0 Provisioning for advanced features, they can follow the following guide for migration.
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/unified_provisioning_manager/9.0BE/migration/guide/migrate_90be_pc90.html
    For more collaterals for Cisco Prime Collaboration, please visit
http://www.cisco.com/en/US/partner/products/ps12363/index.html
Best
Jing

Finally, the solution of the problem was:
1-stop the daemon manager “net stop crmdmgtd”
2- Delete the xml files available under(please take backup from them) :
CSCOpx\objects\sir\work
CSCOpx\objects\topo\work
3-Start the daemon manager net start crmdmgtd (wait for 20 minutes until all process are up )

ASA500: migrate from Cisco VPN Client to native Windows VPN connection

We have a need at this time for only one of our computers to allow 2 Windows users to connect to our network thru VPN (it's a work share situation, they will not both be logged on the same day). We happily use the old Cisco VPN client for everyone else. But the old client will not install twice on the same machine, nor is there the option to "install for any user".
Thinking to KISS and not invest at this point, trying to get Windows native VPN to work ?
What combination of settings will work in its properties->security tab to do the same IKE IPsec over UDP(NAT) and with group auth along with the individual's login?
... (so no reconfiguration is needed in the ASA?)
Or are one of the other "type of VPN" will need minimal change on the ASA ?

Thank you.
I found this: http://www.cisco.com/c/en/us/td/docs/security/asa/asa72/configuration/guide/conf_gd/l2tp_ips.html#wp1041306
Will this have any effect on the rest of the users?
Step 1 Specify IPSec to use transport mode rather than tunnel mode with the mode keyword of the crypto ipsec transform-set command:
hostname(config)# crypto ipsec transform-set trans_name mode transport

Upgrading from 4402 to 5508

Does anyone know of, or have any instructions on performing an upgrade from a 4402 to 5508?

If ur planning for config copy from one to another.. then here is the IMPORTANT instructions..
http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0MR1/configuration/guide/cg_managing_ctrlr.html#wp1063850
Do not download a configuration file to your controller that was uploaded from a different controller platform. For example, a Cisco 5500 Series Controller does not support the configuration file from a Cisco 4400 Series or 2100 Series Controller.
Its not suported!! if something goes wrong then please dont blame Cisco telling crappy products!! we have the written doc

Migrating from Brocade 2800/ 3900 to Cisco MDS 9509

What is the best procedure from migrating from Brocade 2800/3900/12000 to Cisco MDS 9509 especially connected to HP-UX and AIX server.
Without any Downtime I should be able to migrate these servers.
I thought about these options:
1. Use vgexport and vgimport or exportvg and importvg (AIX) after connecting to Cisco MDS. But this requires complete downtime on the application.
2. Take one path down or HBA down and switch the cable and vgextend the devices.
Please let me know if somebody has procedure.
I was successful in HP-UX server using the second options but I cant see all the LUNs. That might be array specific problem also.
If anybody has detailed procedure on migrating this scenario. please let me know.
We are using Persistent FCIDs on our MDS switches.
Thanks in Advance

After connecting 1 cable from server HBA to Cisco S/w, why you are not able to see all LUNs, did you cross-check that...I mean HBA Configuration (max 256 LUNs) or Disk Array library driver to be installed on host side.if that can be sorted out, you can mirror the volumes across the disk arrays.are you using HDS Arrays? I don't know but what is vgextend command you are mentioning...
also did you take a reboot of server or is it online addition on new LUNs...
Also any how if you are not able to see all LUNs that is going to be an issue later as well for migration...pls cross-check that...

Migrating data from Cisco NCS 1.1.1.24 to Prime Infrastructure 1.3 Question

I am spinning up a new VM server for Prime to migrate from NCS. I have not been able to find the patch Cisco recommends to run before upgrading. My question is do I need to run this patch (ncs_patch-1.1.1.24-upgrade-12.tar.gz) if I am just gong to bring up a whole new machine and not upgrade the existing NCS? My plan is to do a back-up on the NCS and a restore from the new Prime.

Migrating from NCS 1.1.1.24 to Prime Infrastructure 1.3
To migrate to a new Prime Infrastructure 1.3 system, follow the process as described in the following two links below:
● Back Up the Data from the Existing System
● Install a New Prime Infrastructure System and Migrate the Data from the Backup
● Restoring Prime Infrastructure Database in a High Availability Environment

Installing cisco prime on vmware & migrating from wcs

Hi,
We have been tasked to install prime on a vmware box then migrate from wcs, i have never done this before & was wondering if anyone has any experience in doing this way, how easy is it & if you have any docs etc?
Cheers
Sean
Sent from Cisco Technical Support Android App

Hi,
A direct upgrade from a WCS release to Prime Infrastructure 1.2 is not supported. You must first upgrade to an NCS 1.1 release, and then upgrade to Prime Infrastructure 1.2.
Please check the links below:
Cisco Prime Infrastructure Configuration Guide, Release 1.2
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/tasks.html#wp1215225
Release Notes for Cisco Prime Infrastructure, Release 1.2
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/release/notes/cpi_rn.html#wp73605
WCS to NCS or Prime Infrastructure?
https://supportforums.cisco.com/thread/2176121

Migrating from SIEMENS HIPATH 3000 to a CISCO VOIP Solution

We've got a SIEMENS HIPATH 3000 PBX system with 15 to 20 individual telephone lines coming in from the telecom operator into the FSO card of the PBX
We are planning to migrate to CISCO Call Manager and are also implementing an 3845 Router
I would like to know if there is an interface on the router into which these 20 RJ11 phone lines go or is there another option
How do I go about it ?

Thanks pk, I knew of the FXO Cards. However I do not think there is any FXO card that allows for 20 RJ11 individual phone lines
Because all the cards available at the link you sent me are all 2, 4 or max 8 ports
VIC-2FXO 2 FXO
VIC-2FXO-EU 2 FXO
VIC-2FXO-M1 2 FXO
VIC-2FXO-M2 2 FXO
VIC-2FXO-M3 2 FXO
VIC-4FXO-M1 4 FXO
VIC2-2FXO 2 FXO
VIC2-4FXO 4 FXO
MRP3-8FXOM1 8 FXO
Do you have the product number of any FXO card that has 20 FXO ports for 20 RJ11 phone lines ?

Resources for migration from legacy Cisco VPN client to AnyConnect?

As the legacy client is now officially EOL'd, and it is having issues with Windows 7 - the need has presented itself to migrate to AnyConnect.
The complicating issue here is that many of the machines that need to be migrated connect remotely and never touch a corporate LAN - as such - I need to devise a means to remotely and seamlessly (as much as possible) migrate from old to new. Sounds a bit like changing the wings on a flying plane, but I'm guessing others have had to face the same issue. By procrastinating this migration - my hope is that your blood spilled will be mine saved? (Just kidding. Sorta).
Any tips, input, suggestion, procedures, FAQs, good luck wishes, etc. greatly appreciated.
Cheers,
JP

Hi Andy
Anyconnect licensing is a little complicated, but 99% of the time you only need the "Essentials" AnyConnect license for your ASAs. This gives you everything that you have using the old Cisco VPN Client.
Essentials is licensed per ASA, and not per user like the other ASA AnyConnect licenses.
AnyConnect Premium gives you all that Essentials give you plus "clientless" VPN (Web portal type stuff).
Configuration wize - it's pretty simple and similar to how you configure the old VPN support. There's a wizard to assist you in configuring it if you like that kind of thing.
HTH
Barry Hesk
Intrinsic Network Solutions

Migration from F5 to Cisco ACE

Hi All,
I am preparing for a migration from F5 to ACE. Can someone help me with a technical approach that I should take to make this migration successful.
Rishi

Hi,
What I would do:
Is it a kind of copy/paste migration?
Is it layer2/layer3 design?
- list all IP addresses for the ACE (physical for the vlan interfaces + aliases (VRRP like address))
- list all VIP addresses + services (fe. http, dns, ftp...)
- list all real servers that will be used, ordened per VIP (serverfarm)
- list all probes per real server
- list all specific exceptions (fe. stickiness, cookie insertion, NAT...)
- list all network parameters (fe. static routes, default routes, ACLs for management...)
I think this should help you already. The rest depends on the design and complexity that is in your setup.
Hope this helps.
Regards,
Dario

Inter-Controller and Inter-Subnet Roaming between WLC 4402 and 5508?

Hi!
Will it support roaming between WLC 5508 ver. 7.0 and WLC 4402 ver. 4.2?

Here is the matrix for support of IRCM, but the answer is yes.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp116668
Sent from Cisco Technical Support iPhone App

WLC Migration from 4400 to 5500

dear friends,
i have a existing wireless network setup in my office
existing wlc in 4402 and LAPs are 1130 & 1242 all are working fine
but we are now planning to use new 5500 series controllers for the same access points,
i want to ask that how i can done this job with very minore downtime and users disconnectivity + zero error results??
thanks

WLC Migration from 4400 to 5500
Hi, it would be better to bring up the 5508 on a different IP address and setup mobility between them and move the APs from the 4400 to the 5508.
The option off loding the configurarion of the 4400 to the 5508 i would not do it since it is 2 different platforms and the configuration file may get corrupted or not work as it should, also the 4400 requires AP manager interface mean while the 5508 not and other differences.

Migrating from Cisco 4402 to 5508 - AP Compatibility

Similar Messages

Maybe you are looking for