Migrating from CR8.5 to CR10 in VB app??

Post Author: Gala
CA Forum: Upgrading and Licensing
I have a VB app(executable, VB 6.0) where i put about 50 Crystal reports(.RPT) developed in CR8.5 in 2001.
Now I have CR10 and am trying to rewrite VB app the same way (using RDC component) basically just importing the same reports that have not changed for years. I have installed (and reinstalled) CR10 about 5 times and still do not have RDC as a available Designer on 'Designers" tab in VB project Components. So I do not have a way to import the old Crystal Reports (*.RPT). I have read tons of PDF docs and searched for hours for the solution, but no luck so far.
What are my other options?
Thanx in advance to all who can help. ~Gala.

Post Author: ejthunder
CA Forum: Upgrading and Licensing
Hello,
What edition of Crystal Reports 10 do you have? You have to have CR 10 Developer or Advanced Developer. CR 10 Professional and CR 10 Standard are not development level products and do not install development components into VB6.
Open CR 10 and go to Help > About. What is the edition description at the top? If it doesn't say CR10 Developer or Advanced Developer you have your reason.
I hope this helps!
EJ

Similar Messages

Migrating from iPhone 3GS to iPhone 4 * Apps disappering

I have an iPhone 3GS with OS4. Most of my apps works ok, but I some need upgrading to work properly under OS4. So I wait patently.
But I have another problem:
I have bought an iPhone4 and try to migrate from the 3GS.
But it seems that there are Apps disappering on the way, and I would like to know how to fix it.
My prosedure is like this:
Full backup of the 3GS
Recovery of the same backup to my IPhone4
.. and som of my apps are gone.
I have used hours to put stuff into my Apps and hate to lose it all..
So currently I keep on using my 3GS.. Would like to move permanently to my new phone! Hope someone can help.
PS! IT is not jailbroken.
Have the same version of OS4.02 on both phones.

After you restore from backup, you MUST sync to restore your itunes content, which is selected under the various tabs in itunes, just like you did for your 3GS. Itunes content is NOT included in the iphone backup.

Migrating from ICM scripts to CVP-VXML Apps

Good day all.
Currently we are running on:
ICM 7.2
CVP 4.1
CUCM 6.
Call flow: using ICM-Script Editor
Applications: Using apps deployed on CVP-VXML server. they are called in ICM scripts.
Well my dilemma is this. We have planned to move all call flows from ICM-Scripts to Call Studio based apps/Scripts.
Now I have studied Call studio and VXML flows, and know that CallStudio/VXML scripts can be run directly from Gateway->ICM->CVP/VXML or in the traditional way called in ICM script.
If we deploy a full Standalone model with ICM lookup (no ICM scripts involved) then how is call queing for SkillGroups/agent transfers handled? do call studio based scripts have the capability, or will we have to include ICM scripts for this?
Secondly, when migrating from ICM scripts to Standalone+ICm lookup model, the current gateway configurations (ie apps, Dial plan and Dial plan to script matching for EACH dialed number) will have to be reconfigured? So as the Dialled number will directly translate to the IVR menu on VXML script?
Need expert inputs on this.
Regards,
AAK.

Hi Asif,
When you use the CVP as Standalone model, its purely for SelfService, Queuing is not possible even if you use Standalone with ICM Lookup. There is no concept of SkillGroups using CVP as Standalone
After the self service treatment is done, you can either transfer the call to CUCM or TDMACD
If you need queuing, you have to go for Comprehensive model.
If you want to go for a StandAlone Model, You will need to configure the Application Name, VxmlServer everything in the Gateway. Have a look at the config guide for CVP Standalone section
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp4_1/configuration/guide/cvp41cfg.pdf
Regards,
Senthil

Connection to ODBC-SQLServer issue while migrating from CR8.5 to CR11.

Hello
I'm trying to migrate a VB6 project from CR8.5 to CR11. I've made all the necessary changes in the project and everything seems to work more or less. I have a problem though i cannot yet solve.
I have defined cReport As CRAXDRT.Report and via its cReport.Database.Tables(Index).ConnectBufferString property, i'm trying to change the database server and database name. I'm using ODBC. I get the old connection string and on it, i change the DSN and Database parameters. Both params seem to be changed, however when i try to Show the report, it seems that it is trying to read the data from the new DSN but using the old database name. I traced the application and i saw that cReport.Database.Tables(Index).ConnectionProperties("DatabaseName") is set to the new database name but it seems that CR engine ignores it and used the old one instead.
Any ideas what might be wrong?
TIA

You are doing everything correctly. But you need to do one more function.
Create a loop and call:
myreport.database.Location Check the help file for more info on using this function.
Basically what you are doing is changing the Server info for the logon info but you also need to update the location of the tables the report is using.

Problems Migrating from Entourage 2004 to All-Mac Apps (Mail, Address Bk)

Greetings All,
Background: After careful consideration, I've moved from a Treo 650 and Entourage 2004 scenario to the new iPhone and all-Mac Apps platform.
It hasn't gone easily: lots of missing, critical data (below).
I don't understand why thousands of business people aren't posting about this: my data is invaluable, and compromised by chunks of it missing.
I have now spent about 15 hours researching this, and posted in several Google Groups. It's rather tedious, and I have lots of friendly people answering rather than people with answers. I like friendly people, but seriously, I'd rather have a hostile person who knows how to do this at this point.
I have read in several places of the scripts of a Paul Berkowitz called "Export-Import Entourage 1310," but the documentation provided doesn't make clear these issues are addressed.
I have written (five times) Mark/Space regarding their Missing Sync for the iPhone, but they have reading-comprehension issues, and I'm still not clear if they can get the notes from either my old Treo 650 via it into my iPhone.
Here is what is missing:
a) Can Paul's scripts (or anyone's!) re-export/merge Contacts such
that categorized/grouped are preserved? This is of great importance.
b) Will it export Entourage's notes, and will they be
correctly titled, and in a useful place on the iPhone? (I have about
400 notes), again categorized?
c) Any way to export my Entourage filters/rules to Apple's Mail?
d) Any way to export the large *mailing lists* (groups) I had in
Entourage to Apple's Mail?
Thank you in advance for your informed answers, and I must say that this has been as annoying as Apple thinking we can't figure that when AT&T raised the rates, the savings on the new phone was wiped out.
Think Better, Apple. If you're trying to get us to use your platform, document how to make the switch.
Thanks,
km

Hey Kevin, sorry for the deafening silence. I can trade you two possible solutions for your secret elegant solution, how about that?
It turns out I have done the exact same thing you've done: I'm going from Entourage 2004/Treo 680 to Apple apps/Toodledo/iPhone. (Getting rid of Entourage altogether has more to do with the difficulty of using Entourage for my small business on the Mac than the iPhone switch.)
So, there are 2 Applescripts available that deal with moving contact groups and categories to the Mac Address Book.
The first is a script from Paul Berkowitz called Sync-Entourage Address Book. This script was developed before Microsoft turned on Sync Services within Entourage, and was intended to fill that gap. It purportedly can copy over contacts, categories and groups from Entourage to Address Book. It has special features for handling both categories and groups simultaneously. The latest version available is from Feb. 2006, and purports to work with Panther and Tiger, but there's no info on whether it works with Leopard. Also, there's no telling whether it will work simultaneously with Apple sync services. (I would guess not.) Berkowitz is not answering emails or responding in Microsoft forums anymore; according to one of the other Entourage MVPs, he is too busy with his day job, so this is apparently all the information there is. If you want to take a chance, the script is here:
http://homepage.mac.com/WebObjects/FileSharing.woa/69/wo/1XKAw6Pv2qUMw3xZ.1/0.2. 1.2.26.31.97.9.35.0.1.1.1?user=berkowit28&fpath=Sync%20Entourage-Address%20Book& templatefn=FileSharing.html
There is another (free!) Applescript from a guy named Jon Nathan called Sync Entourage & AB Groups, that syncs Groups only. It is designed to work with Apple Sync Services, and Nathan has written me that it is up-to-date and does work with Leopard. He also wrote me that you can get an idea of how long it will take in this fashion:
"If you open the script in the Script Editor, switch to the "Event Log" tab
at the bottom of the script window, then run the script from here by
clicking the "Run" button, you can watch in real time as it processes your
contacts and you can get a sense of how long it will take to process your
contacts. This will take some time with that many contacts & groups so it's
probably best to run it while you can do something else like eat lunch."
Nathan's script is available here:
http://www.jonn8.com/html/SyncEntourageABGroups.html
So, some answers to your questions about note exporting from Entourage:
For tasks and notes, I decided to use two iPhone apps from a company called Appigo: Todo and Notebook. Both apps store tasks and notes locally on the iPhone, interact with each other, and can sync to a Web service called Toodledo. Toodledo can import CSV files to their (under-featured, hopefully to be improved) Web notebook, and from there, you can bring them into Notebook on the iPhone. (Notebook works great on the iPhone and you will be loving it a lot more that the Memo app on your Palm, trust me.) In Toodledo, Todo and Notebook, you use folders in place of the categories you had in Entourage, for both tasks and notes.
Unfortunately, I had a very frustrating time getting my 300+ notes out of Entourage using Berkowitz's import-export scripts, but I did figure it out, and can save you some time if your interested. (You will need TextWrangler in addition to the Berkowitz scripts.)
As far as tasks go, I only have about 30, so it was no big deal to enter them by hand in Toodledo and bring them onto the iPhone with Todo. (FYI, Toodledo's basic Web service is free, you pay an annual subscription fee if you want your stuff encrypted on their servers.)
The Toodledo developer has an active forum, and the Appigo guys have Google Groups for both apps. Both Appigo and Toodledo respond directly and quickly to feature requests, questions, etc.
So how's that? What you got for me?

BI Apps Migration from 7.9.6.1 TO Apps 7.9.6.3

Hi,
Currently we using Bi Apps 7.9.6.1 and want to update 7.9.6.3 and we also want to upgrade OBIEE10 (10.1.3.4.1) to 11g (OBIEE 11.1.1.5.0).
Is it possible? if it is possible then Oracle Metalink or any reference document please.
Want to Upgrade to:
1- BIEE 11.1.1.5.0
2- OBIA 7.9.6.3
3- INFORMATICA Version: 9.0.1
4- Dac Build AN 10.1.3.4.1.
5- DATABASE (Data warehouse) : 11.2.0.1.0
CURRENT SYSTEM IS :
1- BIEE 10.1.3.4.1
2- OBIA 7.9.6.1
3- INFORMATICA Version: 8.6.1
4- Dac Build AN 10.1.3.4.1.
5- DATABASE (Data warehouse) : 11.2.0.1.0
6- Source System: R12.1.2 Database: 10.2.0.3
Regards

Yes it is possible, you need to rpd,catalog and Informatica need to version upgrade..
For rpd and webcat you can go with ua.bat
For informatica if you install on existing box, the installation ask you to upgrade say Yes thats it..
Let me know for issues, I'm there to help
mean time will search docs for these 2
If helps pls mark
Edited by: Srini VEERAVALLI on Dec 17, 2012 8:27 AM
for informatica check this
Re: Regarding Informatica Upgrade
for ua
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/toc.htm
Edited by: Srini VEERAVALLI on Dec 17, 2012 8:29 AM

Need help migrating from CR9 to CR10. CR10 is now on its own server

Post Author: ca_nimrod
CA Forum: General
I am not sure how to modify my VBScript code that currently uses the CreateObject command -- Session("oApp") = Server.CreateObject("CrystalRuntime.Application.9") -- to call Crystal. How do I change that code to call Crystal when it is no longer installed directly on the WebServer?
Any help on how to get through this, no matter the solution, is most appreciated.
-Colman

I'm not sure how you can sync the emails you've collected via POP to the IMAP account, or whether it's possible but to setup the new IMAP account should be straightforward. Someone else on here will hopefully be able to advise on the syncing possibilities. I would take the precaution of having a backup of your current 'On My Mac' emails before doing the following.
To create the IMAP account in Mail:
Mail>Preferences>Accounts
Click on the '+' to add an account
Select 'Add other mail account'
Enter your credentials including the word IMAP in the 'Full Name' field (to help differentiate it from your existing POP account with the same email address - you can edit the name later if nec)
Once the detail is filled in hold down the Alt (Option) key before you click on Create and it should change to Continue
The next screen then allows you to specify that the account is IMAP. Input the server addresses and it should be clear from there.

I was migrating from a 3gs to the 4s. Big mistake. Have lost contacts and access to music and apps.

I was migrating from a 3gs to the 4s. Having never upgraded the IOS before, I thought that I should do that before handed the phone down to my daughter to replace her broken 3g. Big mistake. Even using Google sync for my contacts, following instruction from the Google webpage (ambiguous: cancel or not when error message is displayed?) the contacts did not sync to gmail. iTunes says it will sync contacts, but doesn't from the phone, only from the few that were in my old Gmail account. The iCloud set up asks for email and a new password- not specifying that you should use your old email and password for your old iTunes account or your phone will be instantly locked out of those apps and tunes stored there. The web info says you can't merge accounts or passwords, so, I bet I have to cancel the new set up and start over with the old password if it will even let me. I've spent 8 hrs reading, syncing, et c., on this! It will be a long time before I casually buy a new phone from them! I wonder how much time it will take to switch from the 3GS to the 4S? I now have a 3GS without contacts, no way to get the data from those files back, and can't get the apps to it or the 4S until Apple support helps fix the double identity problem.
Considering that I had verbal instructions from the Apple store prior to the IOS upgrade, reviewed all the details on line, I think this process is woefully lacking in clarity and transparency. The local ATT branch offered nothing except backing up to avoid loss of contacts if both phones were taken to the store, but not any help with the IOS or iTunes content. Cable internet for the 3GS backup and IOS 5 upgrade seemed to take about 2 hours. At least calender, notes, etc. were done correctly and 2500 picture and videos were not removed.

After the last post,I went to the local ATT for some feedback. The manager there, Stephen, was helpful and spent a long time, even after i had gotten the abbreviated list of contacts I had constructed from the 3GS to the 4S by an iTunes sync with the correct options selected. This however, would not sync notes. I took screen pix of my many stock symbols for future reference, and got them to transfer with Bump (as photos, in case I want to refresh my memory on some of the symbols added previously). I emailed myself copies of 28 notes i did not want to lose, because the iCloud back up would not initially work. After what seemed like years, I finally was able to get it working, following repeated refusal to Merge because of "not enough space available" @5GB even though everything was turned off except contacts and calendar.
My old phone is finally backed up to the cloud after I turned off location service on new phone, and a bunch of apps and photo data showed up for the first time, as icons to be turned off on the old phone in the Manage Storage window. It said it was going to back up 8 GB of photos when the photo backup had been turned off on the prior screen. (The screws are loose, and the worm has turned on this software at Apple.)
Backup for notes, a few contacts, and calendar, over high speed wifi, took 25 minutes to complete without photos.
I have never seen anything this troublesome in the Apple OS!
You will need to set your own Apple ID and a .me email ID if you want to use the cloud. My recommendation and that of the store manager for the first time is don't back up any photos, let it erase the photo stream if it wants to. The camera roll should be ok.
Backing up to the iCloud removed all my stocks from the old phone! It wasn't supposed to. Be sure to select leave data on phone at every opportunity- even so, there they went. It did not remove contacts or calendar when backing up, though the IOS 5 upgrade had lost my years of contacts since I had not specified that they should be saved when I hit the simple sync in iTunes the first time and since Googlesync failed to connect properly for me over wifi as noted above.
All in all it appears nothing is going to clone your phone or preserve all the data through a IOS 4.x to 5 migration, though I did not do it right the first time with iTunes, and complicated matters by starting with a new ID instead of my old iTunes account and password, living in a small town, away from any Apple store, though if you can't be there at an Apple store with both phones in hand, they probably can't help much unless they walk you through each option in iTunes and you are very attentive. The store genius I saw did not do this, though I had yet to order the phone at that point.
Good Luck!
Message was edited by: richardfromel dorado

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Migrate from Google Apps to Office 365 with admin credentials only

Hi team,
We are migrating from Google Apps to Office 365. I know the normal procedure of migrating, but I want to know how to migrate from gmail to office 365 with administrator credentials. Normally for migration, we use user's mail ID and password in CSV file.
But I don't want to use users credentials, instead I want to use only Administrator credentials.
Thanks in Advance...

A third party tool such as MigrationWiz can accomplish this task. More information on how to set up administrative access can be found here:
https://community.bittitan.com/kb/Pages/GoogleApps%20to%20Office365%20Migration%20Guide.aspx

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

I have just migrated from my 2009 IMac to a new 5K, the creative cloud app somehow is corrupted & not working

I have just migrated from my 2009 IMac to a new 5K, the creative cloud app somehow is corrupted, I have un-installed the old app. Downloaded the creative cloud app again & re-installed but I just get a blank window & no apps showing or even a login screen

Mac Migration and Time Machine DO NOT WORK with Cloud program activations due to hidden files
Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sign in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling is needed
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Google Apps Connector: Migrate from 1.0.4455 to 1.1.5658.jar

Hello IDM Gurus,
Recently I upgraded our IDM instance from 8.1 with patch 14. My
understanding is that this aggregation of patches would also allow us to
utilize the new Google Apps (org.identityconnectors.googleapps-1.1.5658.jar) connector.
http://wikis.sun.com/display/IdentityConnectors/Google+Apps+Connector
1st question: How does one migrate from an existing instance of the Google Apps connector 1.0.4455?
Resources->Migrate Adapters->Migration Wizard (Does not list the Google Apps Resource)
Thank you for any assistance or documentation you may be able to provide.
- IDMxml

I think you had copy from some where i.e pdf, doc file. Write in notepad, don't copy, paste it and try.
In error clearly showing some kinds of junk character ie. "ûrepository"
Edited by: 953040 on Apr 10, 2013 10:47 PM

Upgrading report from CR8.5 to CR10 and connecting to new server

Post Author: jnicholsDME
CA Forum: Data Connectivity and SQL
We have numerous reports (50+) with various subreports that are used by our enterprise accounting system (MAS500). We recently upgraded to a new version of this program. The upgrade required that we upgrade the reports to CR10 from CR8.5 in order to render them in the program's runtime engine. All of these reports now live on a new server and are pointed to a SQL2005 db on that new server. I had to reset the datasource (we're using an ODBC connection) on all of the reports to point them at the new server and database. However, the SQL queries seem to still reference the old database (which was on the old server). The reports run fine inside of the accounting system, however, if we unplug the old server the reports take approimately 1 minute, compared to 3 seconds with the old server plugged in. Even editing the report in crystal, it takes approximately 1 minute to open the report in Crystal designer if the old server is unplugged (as opposed to 2 seconds with it plugged in). Despite setting the datasource it seems as if something in the report is still trying to resolve itself to the old server. Another strange thing is that even when the old server is turned on, the sql database the reports previously referenced is OFFLINE. Despite reset the datasource, when attempting to verify the database the reports bring up a dialog saying a table from the old database can't be found, and this reference is still visible in the SQL query inside of crystal. Unfortunately, I can't edit this query, or I'd probably be able to resolve my issues. Any ideas? Rewriting these reports would take weeks.

Post Author: ejthunder
CA Forum: Upgrading and Licensing
Hello,
What edition of Crystal Reports 10 do you have? You have to have CR 10 Developer or Advanced Developer. CR 10 Professional and CR 10 Standard are not development level products and do not install development components into VB6.
Open CR 10 and go to Help > About. What is the edition description at the top? If it doesn't say CR10 Developer or Advanced Developer you have your reason.
I hope this helps!
EJ

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

Migrating from CR8.5 to CR10 in VB app??

Similar Messages

Maybe you are looking for