Migrating from exc 2010/hosting to a new exc 2013 forest.

Hi all,
I have a ex 2010/hosting and I have to migrate it to a new exc 2013 forest. I followed this good article http://dizdarevic.ba/ddamirblog/?p=115 in a lab environment and I got success in a common 2010. When I deployed the hosting mode I got an error
during the New Migration Endpoint. So I don't have sure about if this issue is related to the /hosting or I am missing something. I did the trust, enable the MRSProxy, The "Prepare-moverequest worked fine, I export/import the certificates, but no way.
This message shows up when asked to validate the FQDN of source domain:
"Remote MRS proxy server:
The FQDN of the Exchange server that the Mailbox Replication Service (MRS) Proxy is on. "
error
The connection to the server 'hostexc01.lab2010.host' could not be completed.
I can ping this name and resolve it. The trust was validated too.
More infos through command:
The call to 'https://hostexc01.lab2010.host/EWS/mrsproxy.svc' failed. Error details: Could not establish trust relationship for the SSL/TLS secure channel with authority 'hostexc01.lab2010.host'. -->
The underlying connection was...
Could you help me, please?
Daniel S Orlando MCSE - Messaging

Hello,
You also need to export CA certificate and import CA certificate.
Please refer the "post 8" in the following thread :http://forums.msexchange.org/Cross_Forest_Remote_Mailbox_Move/m_1800545612/tm.htm
Cara Chen
TechNet Community Support

Similar Messages

Migrating from exc 2010/hosting to a new exc 2013 forest - GAL (global address list) search

Hi gyus,
I am in the middle of a migration from a different exc 2007 forest and exc 2010/hosting to a new exc 2013 forest. All settings are good and I've been migrating some accounts. The only thing that made me sad is about the GAL. Is it possible for the migrated
users keep seen the GAL from the source domain during it? Or only in the end of the moves?
Regards
Daniel S Orlando MCSE - Messaging

You would need some sort of directory synchronization between the two. That could be as simple as manually creating contacts, or something as complicated or expensive as Forefront Identity Manager. There are plenty of options in middle, and
you're welcome to look for them or write your own scripts.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

What's the best way to migrate from an old iMac to a new iMac?

What's the best way to migrate from a 2010 iMac running Yosemite to a new 2014 iMac?

Hello jonfromnorth caldwell,
The article linked below details how to utilize target disk mode to transfer files. This can also be used in conjuction with Migration assistant to transfer your information quickly (the 2010 iMac will appear as a storage device to the new iMac).
OS X Yosemite: Transfer files between two computers using target disk mode
http://support.apple.com/kb/PH19021
OS X Yosemite: Transfer your info from a computer or storage device
http://support.apple.com/kb/PH18870
Cheers,
Allen

What components of VM are lost after its migration from one physical host to another?

Hi, I found this post very helpful for me, it is very easy to understand about the live VM migration. I have a confusion regarding VM migration that if any
VM is migrated from one physical host to another what components of VM (vCPU, vBIOS, vRAM, vHD, vNIC, OS, Apps) will be changed?
Kindly help me to understand that:
1.Will Operating System running on VM be changed? 2. Will BIOS and Boot Loader information be changed?
Thanks Looking forward for your response.

Just to make sure we're talking about the same thing. We're talking about "live-migration" not VM conversion from one hypervisor to another, like a VM from VMWare or XenServer to a VM on Hyper-V, right?
As mentioned above, when a VM is
live-migrated from one Hyper-V host to another, nothing changes. Bios does not change. A
Gen1 VM with traditional BIOS firmware will not turn into a Gen2 machine with UEFI firmware for example.
Boot loader will not change when a VM is live-migrated from one Hyper-V host to another.
MAC address on VM NICs will change when a VM is live-migrated from one Hyper-V host to another, unless the VM NIC is configured with a static MAC address. A Changed MAC address will be interpreted by the VM as a new NIC, which will lose its old IP settings.
Stopping and restarting a VM on the same Hyper-V host changes nothing about the VM synthetic hardware such as NICs, BIOS firmware, or its internal startup files like boot loader.
Stopping a VM, and restarting it on another Hyper-V host changes nothing except the VM NIC's MAC address if it is configured to have a dynamic MAC address as described above.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
Exchange 2013.
Troubleshooting:
1. I have restarted the IIS Services
2. I have restarted MSExchangeOWAAppPool.
3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
I would really appreciate if anyone could share their experiences on similar issues.

I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
I recently found the following when I login with a user who is not effected and then logout:
1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
2. However, I get the below listed error message when I logout.
Your request couldn't be completed.
Click here to continue working.
This may have occurred for security reasons or because your session timed out.

Renaming TFS Server name upon migration from TFS 2010 to TFS 2012

We are migrating from TFS 2010 on existing server to TFS 2012 on new server. All components (TFS 2012, SQL 2012, SPS 2010) are directly on the new server similar to existing server (TFS 2010, SQL 2008 R2, WSS 3.0).
The new server has a new name, however the service provider that does the actual migration,
wants to rename
the new server to be same name as the name of the original existing server when it is shutdown. The rename is intended to be done using
netdom utility.
I noticed there are articles by microsoft and others that describe various issues that may arrise as
result of TFS server rename. However service provider still plans to rename based on his field experience and best practices.
What do u recommend to do in this aspect ? Why would it be necessary to rename and not use the new name (DNS can map old name as well to the new IP) ? What are the actual risks in such rename and is it worth it ?
Thank u

Hi Cathy,
Thank u for your reply.
We know that renaming the new server to the same name as the original one, is
not a must for the migration to work. The issue in question is as follows :
1. A Microsoft partner that has hands on experience in TFS migration, and planned to migrate for us, recommends to rename the new server name, to the original server name, utilizing net_dom command, and to do it during / after same procedure u
provided link to.
2. We found Microsoft documentation that cautions about renaming the server, e.g. renaming SQL server which is in our case on same machine where TFS 2012 is to be installed. However, the partner urges us to rename, explaining that net_dom should perform
the rename safely without caution risk.
Kindly let u sknow if Micorsoft considers such rename with net_dom to be a good
practice in low risk for such migration,
or better keep the new server name as it is and just map the old server name in DNS to the IP of the new server.
Thank u.

When I migrate from my old mac to a new mac does the data remain on the old mac

when I migrate from my old mac to a new mac does the data remain on my old mac

Yes. You are only Copying the Data not moving it.

After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambar

Hi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support

HT4889 I just set up my migration from my old iMac to the new one and it says it'll take 42 hours! What's up with this?

I just set up my migration from my old iMac to the new one via wifi and it says it'll take 42 hours! What's up with this?

blackeducator wrote:
... What's up with this?
Don't migrate wirelessly unless you have a very fast wireless connection. Anything other than 5 GHz 802.11n is likely to take an unacceptable amount of time.

I have just migrated from my 2009 IMac to a new 5K, the creative cloud app somehow is corrupted & not working

I have just migrated from my 2009 IMac to a new 5K, the creative cloud app somehow is corrupted, I have un-installed the old app. Downloaded the creative cloud app again & re-installed but I just get a blank window & no apps showing or even a login screen

Mac Migration and Time Machine DO NOT WORK with Cloud program activations due to hidden files
Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sign in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling is needed
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Planning a migration from Exchange 2010 to Exchange 2013

Hello,
I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

Hello,
Is there any update?
If
you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

Migrating From Exchange 2010

I am in the process of migrating from Exchange 2010 to Exchange 2013. I have all mailboxes migrated to Exchange 2013 and am ready to eliminate Exchange 2010 in its entirety, but I am unsure about public folders. We have no public folders other
than the default ones generated during the Exchange 2010 installation. I can't find anything in any of the migration guides that explain what I need to do in this case. Do I need to migrate anything, or can I just uninstall Exchange from the server
and ignore the default public folders?

Thanks. We had one person using Outlook 2003 years ago, but that has since been replaced with Outlook 2010. I was able to remove the "Calendar" folder that appeared in the Public Folder Manager (took me a while to see the "Delete"
link) and was able to proceed. It does not appear that I have caused any problems.

HT204350 Migrating from a 2010 MBP to a 2013 iMac - stuck halfway through???

I have begun migrating from a 2010 MBP to a 2013 iMac after installing mavericks on both. They are connected by ethernet. The MBP isn't updated to the latest version because it was installed from a previous copy from apple. The migration has started and is stuck on 1 hour19 mins, what should i do? is it safe to somehow stop the migration process? or is it best to leave it be for a few hours or something? i had a lot of trouble starting the process as i had to try multiple times to get it to locate all the files and folders on the MBP. Thanks for the help.

Welcome to Apple Support Communities
Leave it for some minutes to see if the migration process continues. If not, simply turn off both Macs, turn them on and transfer the files again.
If the migration gets stuck again, consider the option of making a Time Machine backup of your old MacBook Pro onto an external drive, and then use that backup to restore your files to the iMac. The steps to restore a backup from an external drive are the same.

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support

Migration from sharepoint 2010 enterprise to sharepoint 2013 standard

Hi
I need to do migration from SharePoint 2010 enterprise to SharePoint 2013 standard. We have only one content database and no custom deployments. I had tried database attach upgrade method. After I run Mount-SPContentDatabase PS Command. First it ran well
for few minutes then it got stuck for hours and finally failed . Please let me know if anyone came across this situation. How to migrate from SharePoint 2010 enterprise to SharePoint 2013 standard? Thanks in advance.

Thanks norari,
Yes ,following are the errors that i got during migration.
Event 5586(SharePoint foundation) of severity 'Error' occurred 6 more time(s) and was suppressed in the event log.
Failure trying to synch
web application a1c11f44-3bc3-4cce-ad2d-e1a459c46c67, ContentDB
6681d540-313f-4ccc-a770-66608eecf3be
string1
System.Data.SqlClient.SqlException
(0x80131904): Invalid object name 'TVF_EventCache_ReadPast_LEQId'. Invalid
object name 'TVF_EventCache_Id'. at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
breakConnection, Action`1 wrapCloseInAction) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at
System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at
System.Data.SqlClient.SqlDataReader.get_MetaData() at
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds,
RunBehavior runBehavior, String resetOptionsString) at
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32
timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method,
TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean
asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String
method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean
retryForDeadLock) at
Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command,
Boolean retryForDeadLock) at
Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command) at
Microsoft.SharePoint.SPChangeToken.GetCurrentChange(SqlSession session,
Int64& changeNumber, DateTime& changeTime) at
Microsoft.SharePoint.SPChangeToken..ctor(SPContentDatabase db) at
Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.SynchContentDB() at
Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean
fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock,
FinallyBlock finallyBlock) at
Microsoft.Office.Server.UserProfiles.WSSProfileSyncJob.Execute()
ClientConnectionId:a1e477c3-5e3c-4e38-818b-18504ae9b5ce Error
Number:208,State:1,Class:16

Migrating from exc 2010/hosting to a new exc 2013 forest.

Similar Messages

Maybe you are looking for