Migrating from messaging direct -- problem with read messages

Folks,
We are migrating from messaging direct's mail server. What I am doing is tar'ing up a user's account,moving it to the new server and untar'ring it. I them use mboxutil to create the folders and then make the '00' directory and number the messages appropriate and move then in. Then I run reconstruct on the mailbox and it works great. The problem is that all the messages are now unread. How do I make them read again???
keith

I had to do a similar migration from a different mail server. I migrated the messages to each user via IMAP, using a Perl script.
The Perl script would determine a few message states and set the IMAP flags appropriately.
I don't recall seeing anything in the docs about setting message states directly. However, in your case, it appears you already have the messages in seperate files. You could try loading via IMAP and setting the flags. I used the NetxAP perl module from CPAN. An alternative, there is an import utility for iMS2. I haven't used it, but you could convert the mail to UNIX mbox format and then load into iMS52.
HTH,
Roger S.

Similar Messages

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Problem with Nokia Messaging on my N97 (V22)

Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?

millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it.

TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

When attempting to use Firefox email, I get a yellow background popup headed ' There is a problem with this message.

when i attempt to open Firefox Mail, I get a popup (yellow background) with the heading "There is a problem with this message". We are sorry, but Yahoo Mail has encountered a temporary problem, referring to Temporary Error 4. It goes on to suggest that I might solve the problem by going to Yahoo Help Page. I tried this to no avail. Can you help? Please keep it simple as I am sort of computer impaired. Thanks, Bob Mayfield

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/clear-cache-history-and-personal-information

Having problems with a message saying a script in this movie is causing adobe to run slowly if it continues to run, your computer may become unresponsive

Having problems with a message saying,A script in this movie is causing adobe flash player to run slowly if it continues to run, your computer may become unresponsive. Do you want to abort script. And my system seems to freeze. What can I do

Here is the download page for Click-to-PlugIn:
http://hoyois.github.com/safariextensions/clicktoplugin/

Problem with instant message in clustered environment

Hello, I have some problem with Instant Message service.
We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
So I did the same configurations on Production Environment but it did not work.
But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
I think it can be a web dispatcher's configuration problem, in its logs I found the message :
"<i>[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]</i>"
I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
Could someone helps me?
Best Regard
null

Hi Alessandro,
unfortunately I got the same problem but I haven't found the solution yet.
Hoping someone will help us.
Regards Nicola

I am facing a Problem with reading images from database

Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from database

I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a macbook 2.1 with osx10.6.8 and want to wipe it clean and migrate from my macbook pro with the same osx..is it possible to do?

I have an older macbook 2.1 intel OSX 10.6.8 that I want to wipe clean and then migrate from my macbbok pro with OSX10.6.8 to the older macbook, is it possible ,how would I do it..especially how do I wipe clean the older macbook?

Connecting to a TV is no different than connecting to any other external display. It's possible that there's a problem with the mini dvi port on the macbook r that you have bad adapters. You might try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Does the Macbook recognize that there's an external display connected when you look at the Display preference pane?

Problem with READ Statement in the field routine of the Transformation

Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
     and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
                                             accno = source_package-accno
                                             binary search
                                             transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.

i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I did that and it is currently whirring away, had over 16000 emails as everything got imported when I set emails up (only had this computer 5 days). So will see what happens when it stops doing whatever it is doing. Sorry if I appear stupid but first Mac I have owned so everything a bit new. Have managed to get most things working correctly just can't sort this BT email problem out. Will report back later!

Having problem with reading list in safari

i am having problem with reading list in safari some time it work sometimes gets hang....

Might be a cache issue ...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Migrating from messaging direct -- problem with read messages

Similar Messages

Maybe you are looking for