Migrating from SIEMENS HIPATH 3000 to a CISCO VOIP Solution

We've got a SIEMENS HIPATH 3000 PBX system with 15 to 20 individual telephone lines coming in from the telecom operator into the FSO card of the PBX
We are planning to migrate to CISCO Call Manager and are also implementing an 3845 Router
I would like to know if there is an interface on the router into which these 20 RJ11 phone lines go or is there another option
How do I go about it ?

Thanks pk, I knew of the FXO Cards. However I do not think there is any FXO card that allows for 20 RJ11 individual phone lines
Because all the cards available at the link you sent me are all 2, 4 or max 8 ports
VIC-2FXO 2 FXO
VIC-2FXO-EU 2 FXO
VIC-2FXO-M1 2 FXO
VIC-2FXO-M2 2 FXO
VIC-2FXO-M3 2 FXO
VIC-4FXO-M1 4 FXO
VIC2-2FXO 2 FXO
VIC2-4FXO 4 FXO
MRP3-8FXOM1 8 FXO
Do you have the product number of any FXO card that has 20 FXO ports for 20 RJ11 phone lines ?

Similar Messages

Migration from WLI2.0 to WLI2.1 - problems and solutions

We have experienced a number of issues when migrating from WLI2.0 (no service packs)
to WLI2.1 - We are only using the WLPI (BPM) part of WLI. We decided to publish
these issues in case they can be of help to others.
Problems:
1. The documentation (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#998197)
says the migration process works from WLPI 1.2.1 and from WLI 2.0 (SP2, 3, 4).
What about WLI2.0 with no service packs - I don't see why BEA should have left
out migration from that platform. We decided to follow the process and see what
happened.
2. There is no indication in the documentation of how to run the GUI based migration
tools on Unix, only for Windows so we had to follow the manual route.
3. The Manual process refers (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#999969)
to the DB variable setting scripts. It then says to run "migratedb.sh". None of
these files have extensions ".sh" - the files that were installed have no extension.
Obviously that did not stop us running them but the documentation needs correcting.
4. The migratedb scripts calls "WLI_HOME/setenv.sh" - it is confusing that there
is a second copy of this file in the bin folder called "setenv". Why are there
2 copies. Also I note that the one in bin is executable and the other is not.
All very confusing!!
5. The migratedb script fails to run because we have not previously run setDomain.
This is not documented.
6. Running setDomain on a domain moved from a WLI2.0 installaion fails since it
does not contain the expected folders. That basically means you cannot migrate
such a domain. We carried on with the process using the bpmdomain so that we could
at least migrate our database automatically.
7. Having run setDomain, we tried migratedb again but it failed because we had
not run switchdb. Again, this is not documented. We ran switchdb successfully.
8. Now running migratedb creates a file called "migrate.sh". Unfortunately the
script migratedb then attempts to run a file called "migrate". This is evidence
that no-one has ever tested this script at BEA and we are very disconcerted by
this fact!! We renamed the script and ran migratedb again - this time it ran the
migrate script.
9. This still fails with the following errors (when calling migrateCommonRep)
     -v (No such file or directory)
     null
     java.lang.NullPointerException
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at com.bea.eci.migration.Migrate.getConnection(Migrate.java:207)
     at com.bea.eci.migration.Migrate.main(Migrate.java:73)
     java.lang.NullPointerException
     at com.bea.eci.migration.Migrate.main(Migrate.java:192)
10. It also fails because it cannot find "sqlplus" - a fatal problem - we do not
have sqlplus installed on the same machine as WLI and yet again this requirement
is not documented. At this point we gave up trying to run the migrate script as
there seemed to be no route forward.
The process we took to move from WLI2.0 (WLPI only) was as follows:
a. Since we had done no changes to filerealm.properties we simply copied the one
fron bpmdomain into our own domain.
b. We have been unable to run the step to migrate the common repository (see note
9). If this is referring to the XML repository then that should not be a problem
to us as we have not used it.
c. We moved the "migrate/BPM_20SP3-21.sql" script to an NT machine and ran that
script on our database. This seems to have successfully updated the database.
Lastly, having completed the migration process we tried to run the server but
it fails. This is because the startWeblogic script fails to call checkdomain properly.
We modified the line to become:
     ". $WLI_HOME/bin/checkdomain"     # the '.' was missing
Does anyone else have any experiences with this that would help us all?
Pete

Pete,
Please post this to the weblogic.integration.interest and weblogic.integration.developer newsgroups?
Pete Edwards wrote:
We have experienced a number of issues when migrating from WLI2.0 (no service packs)
to WLI2.1 - We are only using the WLPI (BPM) part of WLI. We decided to publish
these issues in case they can be of help to others.
Problems:
1. The documentation (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#998197)
says the migration process works from WLPI 1.2.1 and from WLI 2.0 (SP2, 3, 4).
What about WLI2.0 with no service packs - I don't see why BEA should have left
out migration from that platform. We decided to follow the process and see what
happened.
2. There is no indication in the documentation of how to run the GUI based migration
tools on Unix, only for Windows so we had to follow the manual route.
3. The Manual process refers (http://edocs.bea.com/wlintegration/v2_1/migrate/4zubemig.htm#999969)
to the DB variable setting scripts. It then says to run "migratedb.sh". None of
these files have extensions ".sh" - the files that were installed have no extension.
Obviously that did not stop us running them but the documentation needs correcting.
4. The migratedb scripts calls "WLI_HOME/setenv.sh" - it is confusing that there
is a second copy of this file in the bin folder called "setenv". Why are there
2 copies. Also I note that the one in bin is executable and the other is not.
All very confusing!!
5. The migratedb script fails to run because we have not previously run setDomain.
This is not documented.
6. Running setDomain on a domain moved from a WLI2.0 installaion fails since it
does not contain the expected folders. That basically means you cannot migrate
such a domain. We carried on with the process using the bpmdomain so that we could
at least migrate our database automatically.
7. Having run setDomain, we tried migratedb again but it failed because we had
not run switchdb. Again, this is not documented. We ran switchdb successfully.
8. Now running migratedb creates a file called "migrate.sh". Unfortunately the
script migratedb then attempts to run a file called "migrate". This is evidence
that no-one has ever tested this script at BEA and we are very disconcerted by
this fact!! We renamed the script and ran migratedb again - this time it ran the
migrate script.
9. This still fails with the following errors (when calling migrateCommonRep)
-v (No such file or directory)
null
java.lang.NullPointerException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at com.bea.eci.migration.Migrate.getConnection(Migrate.java:207)
at com.bea.eci.migration.Migrate.main(Migrate.java:73)
java.lang.NullPointerException
at com.bea.eci.migration.Migrate.main(Migrate.java:192)
10. It also fails because it cannot find "sqlplus" - a fatal problem - we do not
have sqlplus installed on the same machine as WLI and yet again this requirement
is not documented. At this point we gave up trying to run the migrate script as
there seemed to be no route forward.
The process we took to move from WLI2.0 (WLPI only) was as follows:
a. Since we had done no changes to filerealm.properties we simply copied the one
fron bpmdomain into our own domain.
b. We have been unable to run the step to migrate the common repository (see note
9). If this is referring to the XML repository then that should not be a problem
to us as we have not used it.
c. We moved the "migrate/BPM_20SP3-21.sql" script to an NT machine and ran that
script on our database. This seems to have successfully updated the database.
Lastly, having completed the migration process we tried to run the server but
it fails. This is because the startWeblogic script fails to call checkdomain properly.
We modified the line to become:
". $WLI_HOME/bin/checkdomain" # the '.' was missing
Does anyone else have any experiences with this that would help us all?
Pete--
Developer Relations Engineer
BEA Support

Migrating from Linux based Tacacs+ server to Cisco ACS 1113 appliance

I'm trying to migrate my configuration from a Linux based Tacacs+ server to the Cisco ACS 1113 appliance. Does anyone have any recommendations.
Thanks.

Hi
We (extraxi) offer migration and general consultancy for ACS if you need professional help.
www.extraxi.com/contact.htm

Migrating from CiscoWorks LMS 3.1 to Cisco Prime LMS 4.2

Hi Everyone
My client was formerly having CiscoWorks LMS 3.1. Recently, they purchased Cisco Prime Infrastructure v1.2, which comes with Cisco Prime LMS 4.2. Can I migrate the database (equipment list, usernames etc.) of the CiscoWorks LMS 3.1 to Cisco Prime LMS 4.2? If yes, how do I do this? Please kindly advice.
Shown below, were the Part Numbers quoted to the end client.
R-PI12-UP-K9
LMS 2.x/3.x to Cisco Prime Infrastructure 1.2 Major Upgrade
L-PI12-LF-1.5K-LIC
Prime Infrastructure 1.2 - Lifecycle - 1.5K Device Lic PAK
L-PILMS42-1.5K-U
Prime Infrastructure LMS 4.2 - 1.5K Device Maj Upg Lic
R-PI12-BASE-K9
Prime Infrastructure 1.2 Base License and Software
L-PI12-1.5K-UP
LMS 2.x/3.x to Prime Infrastructure 1.2 Maj Upg 1.5K Device
Regards,
Ram

Thanks Marvin for your advice. Just one last question, there's a statement in the URL that you've provided
"Ensure that the passwords, HTTPS port and SMTP server details are same in both LMS 3.2 SP1, LMS 4.0.1 or LMS 4.1 server and LMS 4.2 server with Symantec Veritas implementation, while migrating data from non-HA to HA environment."
Does this mean my client need to purchase Symantec Veritas, as well?

Any tool to migrate from a Nokia/CheckPoint firewall to CISCO ASA

Would like to know if there is any tool that could help to migrate CheckPoint firewall objects and rules database to CISCO ASA equivalent ;
Could the last CISCO Security Manager product help in this process ?
thanks in advance

Joel, you may need to use a firewall analyser or fw auditing tools to retreave fw rules from Nokia/Fw-1 in a legibel format like using LFA, but you still need to manually entered the configuration into ASA.
Check this link and look for (LFA) Lumeta firewall analyser, they work along with checkpoint..
http://www.lumeta.com/
Also reference this thread, it may help.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7e5c4
HTH
Jorge

Migrating from Brocade 2800/ 3900 to Cisco MDS 9509

What is the best procedure from migrating from Brocade 2800/3900/12000 to Cisco MDS 9509 especially connected to HP-UX and AIX server.
Without any Downtime I should be able to migrate these servers.
I thought about these options:
1. Use vgexport and vgimport or exportvg and importvg (AIX) after connecting to Cisco MDS. But this requires complete downtime on the application.
2. Take one path down or HBA down and switch the cable and vgextend the devices.
Please let me know if somebody has procedure.
I was successful in HP-UX server using the second options but I cant see all the LUNs. That might be array specific problem also.
If anybody has detailed procedure on migrating this scenario. please let me know.
We are using Persistent FCIDs on our MDS switches.
Thanks in Advance

After connecting 1 cable from server HBA to Cisco S/w, why you are not able to see all LUNs, did you cross-check that...I mean HBA Configuration (max 256 LUNs) or Disk Array library driver to be installed on host side.if that can be sorted out, you can mirror the volumes across the disk arrays.are you using HDS Arrays? I don't know but what is vgextend command you are mentioning...
also did you take a reboot of server or is it online addition on new LUNs...
Also any how if you are not able to see all LUNs that is going to be an issue later as well for migration...pls cross-check that...

Migration from UCCE to UCCX

Where to get any informaton (best practises, guidelines ) for migration from UCCE to UCCX.
Does cisco have ani migratio tools ( like scripts, promps migration ) for application transfer from UCCE to UCCX
Thanks

In addition to great tips from Gergely (+5), you will not find too much of folks that went from UCCE to UCCX, it is more common to go the other route.
Other items to consider is the re-deployment of agent desktops to the PC, if you are using CTI OS today you will need to migrate to CAD, so a little different agent experience. Also, pay attention to any 3rd party integrations, ie. call recording, WFM, CTI, VXML, wall board, survey, etc, etc as some may not be compatible with UCCX.
HTH,
Chris

Installing cisco prime on vmware & migrating from wcs

Hi,
We have been tasked to install prime on a vmware box then migrate from wcs, i have never done this before & was wondering if anyone has any experience in doing this way, how easy is it & if you have any docs etc?
Cheers
Sean
Sent from Cisco Technical Support Android App

Hi,
A direct upgrade from a WCS release to Prime Infrastructure 1.2 is not supported. You must first upgrade to an NCS 1.1 release, and then upgrade to Prime Infrastructure 1.2.
Please check the links below:
Cisco Prime Infrastructure Configuration Guide, Release 1.2
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/tasks.html#wp1215225
Release Notes for Cisco Prime Infrastructure, Release 1.2
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/release/notes/cpi_rn.html#wp73605
WCS to NCS or Prime Infrastructure?
https://supportforums.cisco.com/thread/2176121

Migrating from Cisco Unity Express to Cisco Unity Connection

Hello,
We are going to migrate from Cisco Unity Express 8.6.6 to Cisco Unity Connection 9.1.2. Therefore, we need to migrate all mailboxes without data lost.
So, the questions are next: is it possible? Which tools we should use and what steps we need to pass?
Thanks,

Based on my experience of keeping the data (i.e. voicemails for users) it is really not worth it.
Because all these voicemails will add up the Mailbox Space and user will get unnecessary "mailbox full" warnings even though they may be deleted (it takes around 2 weeks to get rid of the deleted voicemails)
Hence, my recommendation would be to do a stare and compare for the most part and build all the Call Handlers etc, this will give you even better chance to get rid of all the unwanted stuff.
HTH

Resources for migration from legacy Cisco VPN client to AnyConnect?

As the legacy client is now officially EOL'd, and it is having issues with Windows 7 - the need has presented itself to migrate to AnyConnect.
The complicating issue here is that many of the machines that need to be migrated connect remotely and never touch a corporate LAN - as such - I need to devise a means to remotely and seamlessly (as much as possible) migrate from old to new. Sounds a bit like changing the wings on a flying plane, but I'm guessing others have had to face the same issue. By procrastinating this migration - my hope is that your blood spilled will be mine saved? (Just kidding. Sorta).
Any tips, input, suggestion, procedures, FAQs, good luck wishes, etc. greatly appreciated.
Cheers,
JP

Hi Andy
Anyconnect licensing is a little complicated, but 99% of the time you only need the "Essentials" AnyConnect license for your ASAs. This gives you everything that you have using the old Cisco VPN Client.
Essentials is licensed per ASA, and not per user like the other ASA AnyConnect licenses.
AnyConnect Premium gives you all that Essentials give you plus "clientless" VPN (Web portal type stuff).
Configuration wize - it's pretty simple and similar to how you configure the old VPN support. There's a wizard to assist you in configuring it if you like that kind of thing.
HTH
Barry Hesk
Intrinsic Network Solutions

Migration from F5 to Cisco ACE

Hi All,
I am preparing for a migration from F5 to ACE. Can someone help me with a technical approach that I should take to make this migration successful.
Rishi

Hi,
What I would do:
Is it a kind of copy/paste migration?
Is it layer2/layer3 design?
- list all IP addresses for the ACE (physical for the vlan interfaces + aliases (VRRP like address))
- list all VIP addresses + services (fe. http, dns, ftp...)
- list all real servers that will be used, ordened per VIP (serverfarm)
- list all probes per real server
- list all specific exceptions (fe. stickiness, cookie insertion, NAT...)
- list all network parameters (fe. static routes, default routes, ACLs for management...)
I think this should help you already. The rest depends on the design and complexity that is in your setup.
Hope this helps.
Regards,
Dario

Lync 2013 Intergration with Siemens HiPath 4000 and HiPath 3500

Dear All,
We have implemented Lync 2013 with 2 FE , 1 PChat , 1 OWA and 2 Edge Server (DNS Load Balancing with NAT) , we are now in the next phase where we need to provide complete voice integration,
The customer is currently using Siemens HiPath 4000 at main office and Siemens HiPath 3800 and HiPath 3500 at the Branch offices,
Our scope is as under,
1) As first part intergrade the we have to integrate it with Siemens HiPath 4000 , with below features,
a) Lync User ability to dial via the PRI Lines
b) Lync User to receive Calls made to their Siemens extension on Lync Client ( Simultaneous ringing or enabling mobility (Similar to Cisco Mobility- When DID calls come they ring both on physical phone and Lync Client)
c) Features Such as Call forwarding , Hunt Groups , Integrated Exchange 2010 UM support ,
Finally Since we need to phase out Siemens we would have SBC 2000 gateway
We have 5 PRI lines going to Siemens HiPath , post this we would transfer one of the lesser used PRI to SBC 2000 , while maintaining complete functionality,
A similar setup would also be done at the Branch Office , except that we would be having SBC 1000 at one of the branch offices and Sangoma Lync Express at the other Branch Offices,
What we need ,
1) Design related suggestions
2) Implementation related challenges and hurdles
3) Dos and Donts , we do not want to over commit the client and then regret,
4) Any kind of Guide and similar scenarios implemented by other , step by step documents,
5) Best Practices , limitations and things to avoid, Suggestions
Thanks and Regards,
Hasan Reza

Dear All ,
I am sure all you guys who have advised me are much more experienced and have a better understanding of Voice,
I would like to rest my solution based on below design , before I submit the same to the customer, Need one final check list , Pls advise / confirm ,
Also please help me with the pre-requisites that I need to go to client with ? If there is something missing pls highlight
Looking at the changed design ,
Here is call flow
1) Calls comes via ---> PRI to Siemens HiPath
2) Hipath locally routes the call if the Extension is present in the Local System
3) If not then call is sent to Sip Trunk that would be accepted by the Sonus 2000
4) Sonus would then forward to the call to Lync 2013
5) Lync 2013 establishes the call with Lync Client
In this scenario , what would be the impact on below
0) Can we have same series of extension , for example (4001, 4002 , 4003 on traditional PABX , and have 4101,4102,4103 on Lync 2013)
1) Conference calls between Lync and Traditional PABX Systems
2) Currently all the Extension are configured with DID nos , any out going calls has the users DID no , after a user is moved to Lync 2013 , then the DID number associated with user , how would that behave ?
3) Can from a I transfer a user and his/her PRI to Sonus, or I should transfer the entire PRI Bunch,
4) Will there be an impact on caller ID , MOH (Music on Hold) , Hunt groups,
5) Will the same concept be used for Branch Offices as well ?
Please pardon my queries but if the above are made clear I am sure many people would benefit from this blog.
Thanks and Regards,
Hasan Reza

How to migrate from BE6000 to Communications Manager

Dear forum members,
first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
issues with our Cisco reseller (Deutsche Telekom/T-Systems).
It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
It took us (me and our reseller) over a year to set these things "right".
Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
I thought, "Hey, finally eveything works as expected..."
I was wrong, so wrong...
What happend? I tell you what happend...
During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
And that was the point when our communication stucked...
Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
Kind regards,
René

DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
I assume you've already verified your server is supported under 3rd party spec guidelines???
But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

ACS migration from 4.1.1.23 to 5.6

Dear Team.
We need to upgrade an ACS 4.1.1.23 to a new ACS 5.6. This means a data migration from ACS 4.1.1.24 to 5.6
The migration guide says that the migration utility must be run on a 4.1.1.24 to check the DB integrity and make some modifications.
Our client has an ACS 4.1.1.23.
In the Cisco Download page for ACS 4.1.1.24 there isn't any acumulative patch to 4.1.1.24. Anyone has any idea how we can upgrade the ACS 4.1.1.23 to .24?
After this patch will be applied, we will backup data from 4.1.1.24 to migration server 4.1.1.24 with demo license (this file exist on Download Center)
Thanks.

You can upgrade to 4.2 and then to 5.6
ACS 4.2 with the recovery DVD, no need to upgrade to ACS 4.1.1.24 and then to 4.2.
Remember to make a backup before the upgrade.
There is a feature that allows you to restore any ACS 4.1 backup into ACS 4.2.
"Before you begin any upgrade procedure, we recommend that you back up your existing data and configuration. When, upgrading do a re-image of ACS 4.2 and then restore the ACS 4.1 configuration."
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.html#wp1120037
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide/migrate.html#pgfId-1057975

Migrating from CUCM 8.6 to CUCM 10.0 - Do I have to upgrade presence as well?

Hello Raees,
I've got a question regarding the Migration from CUCM 8.6 to 1.0, I went through the below "Ask the Expert" article.
https://supportforums.cisco.com/discussion/12103966/ask-expert-cisco-unified-communications-manager-cucm-version-100
My question is, the CUCM 10.0 upgrade mentions the following on page 22
"Refresh upgrade of Unified Communications Manager nodes only
Complete the high-level tasks listed in this section when you want to perform a refresh upgrade of only the
Unified Communications Manager nodes in your network. When you upgrade Unified Communications
Manager nodes without upgrading IM and Presence nodes, ensure that the installed version of the IM and
Presence Service is compatible with the new version of the Unified Communications Manager software."
I would only like to Upgrade the CUCM nodes but the client is using Presence 8.6 as well, would I have to upgrade Presence 8.6 to something else as well or can I just upgrade to CUCM 10.0 and the presence 8.6 would work with it, if I have to upgrade Presence as well then what version of Presence would I have to upgrade to and for the "Refresh Upgrade for Presence" can you mention the SKU that I got to get off the Product Upgrade Tool.
Since it's going to be a Refresh Upgrade for CUCM from 8.6 to 10.0 can you as well provide me with the SKU for the upgrade that I got to purchase, I can see two of them as follows:
UCM-10.X-SW-K9-XU=
CUCM Software Version 10.X for PUT Only, Export Unrestricted
UCM-10.X-SW-K9=
CUCM Software Version 10.X for PUT Only
Thanks
Aamer

Thank you for the reply Chris,
I have a few more questions with regards to what you mentioned in your reply, I'd be glad if you could clarify:
I have not dealt with IMP before...
1) is it like a plugin that runs on CUCM instead of a full fledged server or is it a stand alone server like CUPS (just renamed/rebranded).... I have till date been dealing with CUPS as a stand alone server that integrates with CUCM via the CUCM -> System-> Application Server Option.
2) If it's a plug-in then how would the upgrade be done from the CUPS Stand Alone to this IMP that runs within the CUCM Server or would it be a fresh installation or some activation of services within CUCM... and if it's a stand alone server then what Upgrade Image do I need to upgrade CUPS 8.6.4 to IMP 10.0 or 10.5.
I'm sorry but the upgrade path for CUPS 8.6.4 to IMP 10.0/10.5 is not clear for me, could you help me understand the migration for CUPS 8.6.4 to IMP 10.0/10.5..... could you as well advise any documentation that shows detailed steps for the upgrade from CUPS 8.6.4 to IMP 10.0/10.5... the CUCM upgrade is clear to me from the Upgrade Guide.
Thank you
Aamer

Migrating from SIEMENS HIPATH 3000 to a CISCO VOIP Solution

Similar Messages

Maybe you are looking for