Migrating from Win to Mac

Hello,
I´m hoping to get my new MBP 13" in a couple of days. Due to the fact that all my computers are running Windows Vista, XP and Server, I´m totally new in the world of mac.
All I want to ask is: Is there any possibility to move my whole iTunes 8.2-library (with all podcasts, iphone backups/programs) from Windows Vista to my new macbook pro ? Do I need an external USB-HDD (formatted with NTFS at the moment) to transfer the data from system to system ? The problem from my point of view: iTunes for Windows stores the program folder, the library itself and the data in different folders.
And, sorry for off-topic in this forum: Is it possible to move my pictures (JPG, from digital camera) from my Windows HomeServer to the mac (iPhoto 09) ?
Thanks a lot.

After reading some how-to´s, there a a few questions left.
All I want is to transfer my whole iTunes-data from Windows to Mac OS X. Some how-to´s tell me just to copy the iTunes for Windows-content to a FAT32/NTFS external USB-HDD besides the *.itl-file (=iTunes library) to the MAC OS folders. Another how-to tells me to export the library under Windows to a *.XML-file. Afterwards I would have to change the drive-letter like C: to the MAC-format - that´s all. No *.itl-file, just copying the content to the MAC-folder and importing the library-XML-file into iTunes for MAC.
Could someone help me out ? Which promises to be the better way ?
On Choosing the *.itl-way: Do I have to change pathes ? Does it contain pathes/drive letters ?
Thanks.

Similar Messages

  • HT204350 Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance

    Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance

    I'll venture that your problem here is that you're using two very different versions of Mac OS X.  The USB adapter has been useful to me when making big downloads or while using other networks, but it might not be your case. 
    Here's what I would advise, though it may be less than stellar:  Copy the files you need into folders and move them through a USB flash drive or using that external hard drive of yours. (Could the format be the reason your MBA can't see it?). Some stuff like calendars and contacts can be exported too. At least in Lion, I haven't used Tiger in a while. 
    Good luck.

  • I Photo will not update after migrating from old I-Mac to new I-Mac with fusion drive

    I just migrated from 2009 I-Mac with Mountain Lion to New I-Mac with Mountain Lion with migration Assistant. Now... I tunes will not update although Apple says one is available

    a couple of things - you should not "migrate" applications - you should use the new ones that come preinstalled - what version of of iPhoto do you have on your new mac?
    Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
    LN

  • Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Hi, hopefully you guys can help me out, I just
    purchased a G5 iMac to replace my aging dell desktop,
    and now i'm more or less completely os x dependant
    (I've had an ibook for a few months now). Anyway, I
    have a few questions:
    1. Does anyone know of a (free) mail notifier tool,
    that will alert me when I recieve new pop3 mail? I
    used to use AIM for this in windows
    The built in email program does sound an alert for new messages.
    2. Anyone know of a good (free, again) IRC client?
    iChat works well.
    3. I noticed earlier that my screen was flickering,
    it seems to have subsided for now, but is that normal
    to encounter in a new display? It wasn't really bad
    flicker, but I could see it.
    No idea.
    4. I leave my desktops on 24/7x365, will that be a
    problem with this iMac? Display shuts off of course
    after 30 mins
    You could set the iMac to go to sleep after non use. My Macs are
    always sleeping when not in use, waking them up takes seconds.
    Unlike windoze, never knew if it would be locked up or not.
    5. Should I get the extended warranty? I'm usually
    against them, but I am expecting this computer to
    last me at least 3 years (for $1300 it better!)
    before I upgrade, as I got that much out of a Dell
    and from what I understand, Mac's do not age nearly
    as fast as Windows pc's.
    It is well worth the cost. Never know what might happen. Also
    it is good insurance for future upgrades. I traded in my G4 tower
    purchased two years ago for 75% of what I paid for it. Apple care
    transfers, giving the buyer the remainder of your warranty.
    Thank you for any help,
    -Evan

  • When I migrate from my old mac to a new mac does the data remain on the old mac

    when I migrate from my old mac to a new mac does the data remain on my old mac

    Yes. You are only Copying the Data not moving it.

  • When migrating from PC to Mac is it necessary to restore iPad to factory settings?

    Hi everyone!
    I recently decided to migrate from PC to Mac. Everything is amazingly easy now. I have already migrated my iTunes Library with no hassle and I am very pleased with my decision. I had no problem either with my iPhone nor my iPod but with my iPad, thats a different story.
    I just have one unsolved problem relative to the backup that iTunes performs each time I sync it with my Mac. It takes hours and somewhere near the end iTunes tells me it was not possible to backup. So if I want to sync I must skip the backup process but I know that's too risky. I can't even upgrade the iOS on my iPad because of the backup issue.
    I have read in some other forums that maybe this is because when I bought my iPad it was formatted to sync with PC and restoring factory settings would solve the problem.
    Is there any other way to solve this? Because I have a lot of information that comes from inApp dowloads and I would like to skip long hours of re-downloading my content.
    Thanks!

    There is no Windoze and OS X formatting with an iPhone, iPod Touch, or iPad.
    The problem is with your existing backup.
    At the iTunes menu bar go to iTunes > Preferences.
    Under the Devices tab select and delete the existing iPad backup.
    Control-click on your iPad under Devices in the iTunes source list and at the menu window that appears, select Back Up to create a new backup.

  • When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

    When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

    Yes. The following quotation is from About Windows Migration Assistant
    These are the preferred network connections, in order:
    Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

  • Migration from 350 G4 Mac

    I have just gotten a new MacBook Pro and I need to migrate from my previous Mac. I have a 350MHz G4 Mac running 10.3.9. It has firewire but when I reboot holding down the T key (as instructed by the migration assistant) it just boots normally. When I look for rebooting as a target disk it doesn't give me that option. What am I missing? Or is it just that my old Mac is just a dinosaur? What are my options?
    Thanks

    Start with Best Practices If the G4 won't go into TDM (see http://support.apple.com/kb/ht1661 for details), then use Disk Utility, restore it to an external FireWire HD, and use it instead.

  • Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

    Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

    If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
    You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot)

  • PSE12: How do I migrate from Windows to Mac

    I bought
    Adobe Photoshop Elements 12 Student and Teacher Edition
    and
    Adobe Premiere Elements 12 Student and Teacher Edition
    for my daughter.
    She has migrated from PC to Mac. How can I get the Mac versions of these softs?
    From my downloading, I can only see Windows installers (exe and 7z files)

    Contact Adobe to see if this is possible. There is no guarantee that any software is portable, and I feel the student edition may not be, but Adobe will have the final say.

  • How do i speed up my migration from my old mac to the new one?

    How do i speed up my migration from my old mac to the new one?

    what method are you using? Firewire, ethernet, wireless?  I'm assuming you are doing this via Migration Assistant.  You can't speed it up if it is in process, but you can use a faster method if available to you.  http://support.apple.com/kb/HT4413

  • Why does it take me so long time to migrate from my old Mac

    Why does it take me so long time to migrate from my old Mac?
    I just bought a new MacBook Air and using an ethernet cable to migrate all material from my old MacBook Pro, it has now taken med 4 days
    and still not done? What am I doing wrong?

    Thanks for that gbrenik.
    Don't really wanna start reloading all of Lion, but read somewhere that I should start the migration by restarting my source Mac by holding down T during startup, that would do the trick. Is this what I  have done wrong?

  • Migration from PC to Mac without losing application data (savegames etc.)

    Hello everyone,
    I am migrating from from my old Windows PC onto a MacBook Pro, and I'm having difficulties with iTunes and my iOS devices (iPhone 4, iPad 1). Maybe someone here can help me out, I'd be ever so grateful.
    I set up iTunes on my MBP yesterday and logged in to my account. I replaced the empty iTunes Media folder with my old one (which contains all my music, videos and applications) via an external hard drive.
    First problem: it wouldn't import these files into my new library automatically. Just showed me an empty library I think I imported the entire iTunes Media folder manually yesterday via "Add to folder". The status right now (after some experimentation) is old iTunes Media folder copied, but nothing imported (that is, I have an empty library).
    When I connected my iPhone and tried to synch, I first had to authorize the MacBook for the iPhone. So far, so good. However when I tried to synch iTunes warned me that if I synch, all data on the iPhone will be removed and replaced by the data from my new local library (which is, of couse a copy of my old library, but doesn't store application data like savegames).
    I tried to do it via "transfer purchased items from iPhone", which took forever, but yielded the same result: a warning that all data on the iPhone would be erased.
    So the question is: How do I connect my iPhone and iPad to iTunes on my new Mac without losing application data like settings and savegames? And why is this so complicated and intransparent? I should be able to just copy my media, say "authorize this Computer, then add iPhone to the registered devices" and then proceed like nothing ever changed.
    I searched the net until three in the morning yesterday, but couldn't find anything that sounded safe enough to give it a try.
    Thanks in advance and best Regards,
    Nate
    PS: I do have the backup-folders from my old PC on a USB stick - are those going to help?
    Message was edited by: Nathan1980 (Correction)
    Message was edited by: Nathan1980

    I was fighting this battle the past few days myself; but actually it is REALLY easy now. See here:
    http://www.macworld.com/article/146958/2010/03/moveitunes_windowsmac.html
    Then, once iTunes was on the Mac, I did this:
    1. On the Mac rename ...\iTunes\iTunes Library.itl as ...\iTunes\iTunes Library
    2. On the Mac delete ...\iTunes\iTunes Library Genius.itdb (Apparently the PC & Mac versions are not compatible - iTunes will just rebuild it later)
    3. Launch iTunes and immediately press & hold down the Option key until a dialog opens asking you to Choose a library. Navigate to the folder/drive you've copied from the PC and open ...\iTunes\iTunes Library.
    (thanks to turingtest2 for the above steps)
    That was it. Did it yesterday evening. All playlists, libraries, everything copied fine. No problems; no broken links. Perfect.

  • After applying Hotfix 2910552,while doing Migration from Win XP to Win 8.1 got Error 800700C1

    Hi,
    I have two SCCM Lab. Both have same configuration and hotfix(2910552) installed.
    I am doing hardlink migration from Windows XP to Windows 8.1.
    In one of the lab migration from XP to win 8.1 have successfully implemented after applying the hotfix 2910552,and then after updating the Boot image. But i am getting issue while doing the same on my second lab. The error in log file is 
    Command line execution failed(0x800700C1)
    Failed to install boot image,is not a valid win32 application
    Failed to reboot the system(0x800700C1)
    Thanks
    Pallavi

    Thank you for sharing the solution.
    If your question was resolved/answered, you should mark the thread as "answered".
    Then you should make e new thread/question for the new error you get. This will make it alot easier for other users, modetrators and Microsoft to help you. It will also make it much eaiser for othe people with the same issue to search the forums.
    Thank you.
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • Unable To Sync After Migrating From Win XP(32 bit) to Win 7(64bit)

    I received a new PC, dual core platform, for XMAS.  However, I received a Com 1 port failure when performing a Hot Synch to upload my PD(,M500) data to Palm Desktop on the new PC.  Palm tech support said there is no USB driver available for the 64 bit OS.  Does anyone have a 3rd party USB driver, or any other suggestions to allow me to do a Hot Synch on my new PC.
    Thx,
    Ed
    Post relates to: Palm m500

    Originally Posted by mystico2
    Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
    any help?
    Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
    Hope it works for you!

Maybe you are looking for