Migrating Interactive Unix system to Solaris 8

We are migrating a system developped using Interactive Unix 4.1 to Intel Solaris 8. Anyone has experienced that?
First difficulty is to read Interactive file system under Solaris, any tools for that?
Thanks!

If you'd like to send me private mail to [email protected] I may be able to offer some pointers.
Rgds
Chris

Similar Messages

MS-ACCESS from Unix system..

Hi,
I have a MS-Access database on Windows 2000 server. I need to write a java program running on a Unix system (AIX, Solaris or Linux) that accesses the database on the windows 2000 server. I can make it work on windows box using JDBC-ODBC bridge. How can I do that from a unix box? Thanks.

The easiest way is to get a pure Java JDBC driver for
MS Access. I am rather certain that that does not exist. There are certainly systems that provide a java only driver which allows one to access MS Access. But they involve more than just java.
(Every time I searched the JDBC driver list for MS Access drivers all I found were proxy drivers.)

Application Migration from HP-UNIX to SUN Solaris

Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.

Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You.

Solaris 8 and SunSoft Interactive UNIX

Can Solaris 8 mount a SunSoft Interactive UNIX drive? Have Solaris 8 running from IDE drive. Have SCSI controller installed with Interactive UNIX SCSI drive. /dev/dsk/c2t0d0p0 is the first partition, and can be read via "dd" or "od". But mount won't touch it. fdisk reports "Unix" partition. Any way to mount? Thanks.

You need to have the SAN Foundation Software loaded and running. You can get it at http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=8&PartDetailId=StoreEdgeSw-4.0-G-F&TransactionId=Try
If it's installed and running make sure to read the docs also available at the link above.

OID and Solaris/Unix system authentication

Does anyone have any experiences with using OID as a SSO solution for unix system authentication/authorization. I'm looking at using pam_ldap, but didn't know if Oracle had an alternate suggested implementation? Any help/pointers are appreciated.
Thanks,
--Mark

Figured out that you need to run the following to have the DB subscribe to a policy in OID:
sa_policy_admin.policy_subscribe('POLICY_NAME');
this adds the dn of the DB to the uniquemember attribute of the POLICY_NAME entry in OID. Once I did this, I could add the policy to DB objects.
I also discovered that when you create a profile in OID, the olsadmintool documentation is not corrrect. When you create the minimum write label, do NOT include any compartments or groups in the definition. The only valid item in this label is LEVEL. Once I recreated my profiles with a valid min write label, everything seems to work ok.
I am having issues with updating a Profile definition in OID and seeing the corresponding update reflected in the DB SA$PROFILES and SA$USER* tables.

Print Module confusion - settings, templates, and migration to new system.

I'm a little confused by some aspects of the print module. First, I tried copying some of my print templates from Lr1.3 over to the print template folder in 2.3, and they didn't' seem to work right. The layout display in the upper left preview window did not match the layout of the main preview window, and many of the settings were not right, such as what printer was supposed to be used. Is there a problem with using 1.3 templates in 2.3?
Next, I can select a paper type in the printer driver AND in the Lr color management section. Do these each do different things?
Also, what does the Lr "Print Resolution" do -- i.e. how does it interact with the printer driver "quality" options, which sets the resolution? Does one setting override the other? If select the maximum quality (i.e. max resolution) in my printer driver settings, should I uncheck the Lr "Print Resolution" setting?
Finally, when I migrate from one system to another, am I supposed to manually copy over all my templates? I would have thought that these would be saved in the catalog, but apparently this is not the case.
Thanks for clarification on these issues,
Larry

Does anybody have any feedback on this? I could really use some help since even after numerous searches I still cannot find the answers to the question above.
Thanks,
Larry

Does exist any top creating archives in a file system in solaris 10?

I need to know if exist any limit creating archives in a file system in solaris 10
thanks

http://www.unix.com/solaris/25956-max-size-file.html

Migration from AIX Oracle8i to Solaris Oracle8i?

Hi,
I wonder how to migrate Oracle 8i (8.1.7) on AIX to Oracle
8i (8.1.7) on Solaris?
The Oracle version is the same, but only the O.S platform is
different. I have found the migration information from Oracle
web site but it only talks about migration between different
database.
Thanks.

> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus

Migration from AIX6.1 to Solaris x64

Hi,
In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor. I need clarification for below mentioned points.
1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
2. Is UltraSPARC+IV processor is supported for Oracle 10g
Also, please let me know the steps to be followed for the activity mentioned above.
Regards,
Ranjith

> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus

How to invoke VI function in LabView running on Windows from a unix process in Solaris

Labview is only installed on Windows and Process on Solaris is a standard unix process without any Labview installed.

I'm not sure this is possible. Really, the only way to call a VI are from VIServer or ActiveX. Since you don't have LabVIEW on the other machine, that won't work, and you can't use DCOM from a non Windows machine. There might be a 3rd party application like PCanywhere that will work between environments, but I doubt it. Your best chance might be to rig it so that LabVIEW works as a TCP/IP server and will respond to commands by using the TCP VI's. That should be easy enough to use from a UNIX system.

Labview on unix systems ?

I have an existing project on PC
can labview run on unix system
or linux if I buy
labview for unix ?
jean-Luc

jean-luc wrote:
> I have an existing project on PC
>
> can labview run on unix system
>
> or linux if I buy
> labview for unix ?
>
> jean-Luc
Yes, labview will run on HP-UX, as well as SunOS and Solaris, there is also
a version for Linux.
As far as porting the project from the PC, it should work fine with the
following caveats (there are always some !!)
1. DLLs - these are specific to the platform, if the Labview code uses them
you have a few choices.
A. Remove them and replace with "Pure G" labview code.
B. If you have the source code you could port that to the other platform
(maybe) and recompile.
2. CINs - these are also platform specific, but if you have the code you
should be able to recompile
for the new platform.
3. Active X, OLE, DDE, etc - The
se are all PC specific and can not be
ported, although there MAY
be some workarounds.
4. Hardware - if you have DAQ or other hardware on the PC it may or may not
be available on the other platform.
If the project is all labview and does not use the platform specific
functions (ActiveX, etc) there
should be little trouble porting it.
Good Luck
Kevin Kent

Data migration from legacy system to SAP

hi all,
could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
regards
sridharan

Hi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha

How to run a JAR file in Unix system?

hi there
ca anyone tell me how to run a JAR file in unix system or X window, thank you

You want to create an executable JAR file? You do it in the following way.
Create a manifest file such as manif.txt and the contents should contain
Main-Class: foo
assuming foo is the name of your main class. Then create the jar as follows
jar cvfm foo.jar manif.txt foo.class
I hope that helps you!
you can find more info here http://java.sun.com/docs/books/tutorial/jar/

JDBC on Oracle 8.1.5 on Digital Unix System

In my Digital Unix system , Oracle is loaded on a file system different from the user file system . The necessary zip files are in a directory within the Oracle home directory .
When I do an import oracle.jdbc.driver.*;
from a program in my user file system
it says not found .Other programs not using jdbc however run without any problem from my default directory .
Does one need to define a classpath in one's '.profile' pointing to the dirctory where the zip files are located . I have done that already . The problem persists .
What else needs to be done ?
Does digital unix system read zip files ? or are tar files required ?
null

Currently, Designer 6.0 is certified against Oracle 8.1.6 if you install Designer patch set 4.

ABAP to FTP connect to non SAP UNIX system

Greetings~
I'm looking for a way (via function modules and/or BAPI) to transfer data in flat files from an SAP UNIX system to a non-SAP UNIX system using an ABAP program. I see FM's FTP_CONNECT and FTP_COMMAND however these seem to only work with UNIX systems running SAP as they require RFC_DESTINATION information. Anybody know which (if any) FM's can be used without the necessity of the target system running SAP/RFC?
Thanks!

Hi Joseph,
Please refer the below program.
REPORT ZHR_T777A_FEED.
tables: t777a.                        "Building Addresses
Internal Table for Building table.
data: begin of it_t777a occurs 0,
        build like t777a-build,       "Building
        stext like t777a-stext,       "Object Name
        cname like t777a-cname,       "Address Supplement (c/o)
        ort01 like t777a-ort01,       "City
        pstlz like t777a-pstlz,       "Postal Code
        regio like t777a-regio,       "Region (State, Province, County)
      end of it_t777a.
Internal Table for taking all fields of the above table in one line
separated by |(pipe).
data: begin of it_text occurs 0,
      text(131),
      end of it_text.
Constants: c_key type i value 26101957,
           c_dest   type rfcdes-rfcdest value 'SAPFTPA'.
data: g_dhdl type i,      "Handle
      g_dlen type i,      "pass word length
      g_dpwd(30).         "For storing password
Selection Screen Starts
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE TEXT-001.
parameters: p_user(30) default 'XXXXXXX'          obligatory,
            p_pwd(30) default 'XXXXXXX'          obligatory,
            p_host(64) default 'XXX.XXX.XX.XXX'   obligatory.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE TEXT-002.
parameters: p_file like rlgrap-filename default 't777a_feed.txt'.
SELECTION-SCREEN END OF BLOCK blk2.
Password not visible.
at Selection-screen output.
loop at screen.
    if screen-name = 'P_PWD'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
g_dpwd = p_pwd.
Start of selection
start-of-selection.
To fetch the data records from the table T777A.
select build stext cname ort01 pstlz regio
         from t777a
         into table it_t777a.
Sort the internal table by build.
if not it_t777a[] is initial.
    sort it_t777a by build.
endif.
Concatenate all the fields of above internal table records in one line
separated by |(pipe).
loop at it_t777a.
    concatenate it_t777a-build it_t777a-stext it_t777a-cname
                it_t777a-ort01 it_t777a-pstlz it_t777a-regio
                into it_text-text separated by '|'.
    append it_text.
    clear it_text.
endloop.
To get the length of the password.
g_dlen = strlen( g_dpwd ).
Below Function module is used to Encrypt the Password.
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = g_dpwd          "Actual password
      SOURCELEN   = g_dlen
      KEY         = c_key
    IMPORTING
      DESTINATION = g_dpwd.         "Encyrpted Password
*Connects to the FTP Server as specified by user.
Call function 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connecting to FTP Server'.
Below function module is used to connect the FTP Server.
It Accepts only Encrypted Passwords.
This Function module will provide a handle to perform different
operations on the FTP Server via FTP Commands.
call function 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = g_dpwd
      host            = p_host
      rfc_destination = c_dest
    IMPORTING
      handle          = g_dhdl
     EXCEPTIONS
        NOT_CONNECTED.
if sy-subrc ne 0.
    format color col_negative.
    write:/ 'Error in Connection'.
else.
    write:/ 'FTP Connection is opened '.
endif.
**Transferring the data from internal table to FTP Server.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = g_dhdl
      FNAME          = p_file
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = it_text
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    write:/ 'File has created on FTP Server'.
ENDIF.
Call function 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'File has created on FTP Server'.
To Disconnect the FTP Server.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = g_dhdl.
To Disconnect the Destination.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      destination = c_dest
    EXCEPTIONS
      others      = 1.
Regards,
Kumar Bandanadham.

Migrating Interactive Unix system to Solaris 8

Similar Messages

Maybe you are looking for