Migrating Jolt 1.2 to Jolt 8.0 question

Hi.
I have environment with Tuxedo 6 and WebLogic 5.1 communicating via Jolt
1.2. I want to migrate the system to Tuxedo 8, WebLogic 7, and Jolt 8. Do I
have to chage any code, or configuration related to Jolt to make the
application work with Jolt 8 after migration.
Thanks in advance,
Tinnapat

From our Jolt Engineer:
"Configuration on Tuxedo side doesn't change if the new features
(security propagation) is not used. Configuration on WLS 7.0, uses an
xml file now - different from WLS 5.1. So, the configuration for Jolt
also would be different. The client code changes slightly - only in
respect to how you get the connection to the Jolt servers - see the Jolt
example in Tuxedo."
Tinnapat Chaipanich wrote:
>
Hi.
I have environment with Tuxedo 6 and WebLogic 5.1 communicating via Jolt
1.2. I want to migrate the system to Tuxedo 8, WebLogic 7, and Jolt 8. Do I
have to chage any code, or configuration related to Jolt to make the
application work with Jolt 8 after migration.
Thanks in advance,
Tinnapat

Similar Messages

Migrating Powerbook to Mac Book Pro - Firewire & Leopard questions

1) I have a clone (CCClone) of the PB hard disk. Can I connect this to the MBP instead of the PB started in target mode for migrating my data, preferences etc? (The PB is reluctant to restart, so I avoid it as much as possible).
2) The PB is still on Tiger (10.4.9). Will there be an issue copying across preferences, mail, address book etc data? Should I first upgrade the PB to Leopard? If so, can I use the Leopard installation DVD that will come with the new machine?
Thanks.
AK
Message was edited by: Austin Kinsella1

That's OK. I hope you get it sorted. I mounted my Firewire backup disk on the new MBP, let it run the migration assistant, and it stalled - complaining that it could not copy some file. I created my userid myself and dragged over, folder by folder, the contents of my old account. I was selective in, for example, preferences and application support stuff, 'cos there were a lot of relics of applications that had been tried and discarded.
The only thing I had no success with - I probably missed a file somewhere - was my network locations. Mail worked a charm - on all six mail accounts. I haven't got PGP mail going yet, but I think the new version isn't ready. Safari still provides my name and password on login pages. No Address Book issues at all. iCal didn't pick up the calendars I had brought over, so I dropped them on it one at a time and that is now OK.
After 3 days I think I have it pretty well under control, with only half-a-dozen things left on the migration todo list.
AK

Migrate from 4.3.6 to 6.x questions

CS-MARS-100E-K9 After migrating from 4.3.6 to 6.x and importing the configuration and data: Will all custom user reports still be there? Will all custom inspection rules, drop rules, etc still be there?
I want to make sure I am not going to lose anything that we have customized in our existing configuration.
I may end up waiting for the next minor release of 6.x but I would like to find out ahead of time.
Thanks!

Yes reports should be part of it.
Regards
Farrukh

Migration from 2007 and Archive Mailbox PST import question

Our enterprise will be migrating from Exchange 2007 SP3 to Exchange 2013 CU3 very shortly. Exchange 2013 is set up and I am in coexistance mode currently. Everything is working fine with the legacy redirection, I have tested some mailbox migrations and they
work fine. We currently use Mimosa Nearpoint as a third party email archive product.
As part of this migration from 2007 to 2013, we plan on moving away from Mimosa Nearpoint and utilizing the Exchange 2013 Archive Mailbox feature. We will give each user an Archive Mailbox. We have the ability to export the users existing archive out of
NearPoint to .PST files and then migrating them directly into the users Archive Mailbox using the "New-MailboxImportRequest -IsArchive" powershell commandlet. This has been tested and works fine with one very important exception.
When I export from Nearpoint, I have to export the entire contents of the archive, I cannot set date ranges. So when I do an export, it also contains the contents of the user's mailbox. I have managed folder policies in place in the Exchange 2007 environment
which delete all contents of the mailbox older than 60 days, but when I import the .PST to the archive, it imports ALL items into the Archive Mailbox. So I have 60 days worth duplication of items.
It is my understanding that if I imported the Archive .PST directly into the users production mailbox in the 2013 side, that it would not import duplicate items. I am trying to find out if there is any process which will do the same thing with me importing
directly into the users Archive Mailbox.
Thanks you,

Hi,
We used a third patry email archive product to export to .pst files, so it is too hard to say that whether it cause this issue.
However, I found a method to delete the duplicate items from our mailbox via MFCMAPI Tool.
Please make sure that the Exchange Server mailbox has been backed up first.
Details in the following KB:
How to remove duplicate folders in Outlook when connected to an Exchange Server mailbox
http://support.microsoft.com/kb/2509983
I also found a script to remove duplicate items.
This script will scan each folder of a given mailbox and removes duplicate items from those folders. You can specify how the items should be deleted and what items to process, e.g. mail items or appointments. Sample usage is after a misbehaving synchronization
tool creates duplicate items or (accidental) import of PST file with duplicate items.
*****Please also make a full back up first*****
Removing Duplicate Items from a Mailbox
http://gallery.technet.microsoft.com/office/Removing-Duplicate-Items-f706e1cc#content
Disclaimer
The sample scripts are not supported under any Microsoft standard support program or service.
The sample scripts are provided AS IS without warranty of any kind. Microsoft further disclaims all implied warranties including, without limitation, any implied warranties of merchantability or of fitness for a particular purpose.
The entire risk arising out of the use or performance of the sample scripts and documentation remains with you.
In no event shall Microsoft, its authors, or anyone else involved in the creation, production, or delivery of the scripts be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss
of business information, or other pecuniary loss) arising out of the use of or inability to use the sample scripts or documentation, even if Microsoft has been advised of the possibility of such damages.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Session is not Migrated when I use HttpSessionActivationListener .

Hi all,
I studied about HttpSessionActivation Listener and in order understand it fully I created a simple program . I studied that the listener will be invoked whenever session attribute is migrated from one JVM to another .
The following was what I did to understand HttpSessionActivationListener
Created two instances of Tomcat in a single box.(Actually two services)
Configured Apache Http Server to point the two instances (Load balancing and fail over) [Using this link|http://thought-bytes.blogspot.com/2007/03/how-to-load-balance-tomcat-55-with.html]
Created a small web application and deployed in two servers
Source codes
===========
SessionMigrationTester Listener
package c6;
import javax.servlet.http.*;
import javax.servlet.*;
import java.io.*;
public class SessionMigrationTester implements HttpSessionActivationListener,Serializable { //Implemented Serializable Interface
     public void sessionDidActivate(HttpSessionEvent evt){
          System.out.println("========================");
          System.out.println("Session DID Activated --**-- Serializable");
          System.out.println("========================");
     public void sessionWillPassivate(HttpSessionEvent evt){
          System.out.println("========================");
          System.out.println("Session WILL Passivate --**-- Serializable");
          System.out.println("========================");
}Web.xml
========
<web-app>
<servlet>
     <servlet-name>SessionTest</servlet-name>
     <servlet-class>c6.SessionExample</servlet-class>
</servlet>
<servlet>
     <servlet-name>servlet3</servlet-name>
     <servlet-class>c6.Servlet3</servlet-class>
</servlet>
<servlet-mapping>
     <servlet-name>SessionTest</servlet-name>
     <url-pattern>/sessiontest.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
     <servlet-name>servlet3</servlet-name>
     <url-pattern>/servlet3.do</url-pattern>
</servlet-mapping>
</web-app>SessionExample.java
package c6;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class SessionExample extends HttpServlet {
     public void doGet(HttpServletRequest req,HttpServletResponse resp)throws ServletException,IOException {
          System.out.println("Inside doGet method ");
          PrintWriter out = resp.getWriter();
          resp.setContentType("text/html");
          HttpSession session = req.getSession(false);
          out.println("<html>");
          out.println("<head> ");
          out.println("</head>");
          out.println("<body>");
          out.println("<form >");
          if(session ==null){
               System.out.println("No Session exists creating a new one ....");
               session = req.getSession(true);
               String sessionID = session.getId();
               if(session.isNew()){
                    session.setAttribute("hello",new SessionMigrationTester());
                    out.println("New session is created ID:- "+sessionID);
                    System.out.println("New session is created ID:- "+sessionID);
          }else {
               String sessionID = session.getId();
               session.setAttribute("hello",new SessionMigrationTester());
               out.println("Old session ID:- "+sessionID);
               System.out.println("Old session ID:- "+sessionID);
          out.println("Modified ***<br/>");
          out.println("<input type='submit' value='click me' />");
          out.println("<script lang='javascript'>");
          out.println("document.forms[0].action ="+"\""+resp.encodeURL("servlet3.do")+"\"");
          out.println("</script>");
          out.println("</form>");
          out.println("</body>");
          out.println("</html>");
          System.out.println("End of doGet");
     public void doPost(HttpServletRequest req,HttpServletResponse resp) throws ServletException,IOException {
          doGet(req,resp);
}Servlet3.java
=========
package c6;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Servlet3 extends HttpServlet {
     public void doGet(HttpServletRequest req,HttpServletResponse resp)
     throws ServletException,IOException {
          HttpSession session = req.getSession(false);
          if(session!=null){
               System.out.println("Session Already Exists! "+session.getId());
          }else{
               System.out.println("Session doesn't exists!!!");
     public void doPost(HttpServletRequest req,HttpServletResponse resp)
     throws ServletException,IOException {
          doGet(req,resp);
}Whenever I stop one instance(say "Tomcat instance 1") I'm getting a message "Session Will Passivated "(which is what I have in overridden sessionWillPassivate method)
I'm also getting "Session Did Activated" message (overridden in sessionDidActivated method) whenever I start the same instance(say "Tomcat instance 1").
What I expected
============
After stopping the Tomcat instance (say "Tomcat instance 1") I reloaded the same page expecting this time it will be served by another Tomcat instance(say "Tomcat Instance 2" and I will get "SessionDidActivated" message from "Tomcat instance 2" but it didn't worked as I expected instead the page is served by another Tomcat instance("Tomcat instance 2") but the session is not migrated and I'm not getting "SessionDidActivated" in the new Tomcat instance.
I also created a new Servlet named as (Servlet3) and modified SessionExample.java to this .so that It contains button and when it clicked it will hit a new Servlet(Servlet 3) but it also doesn't help.
I'm trying this in a single physical machine with two tomcat instance configured with Apache Http Server .
Is anything I'm missing ?
Please clarify me why the session is not migrated .
Thanks in advance

Hi ejp,
One more question I have . Today I tried to find out why the listener class is not invoked(I doesn't get "SessionDidActivated" and "SessionWillPassivate" sysouts from listener class) and found that when I enable clustering in Tomcat it's doesn't works(even though session migrates) and when I switch back to normal mode it does work .
Following is the fragment I uncomment to enable clustering
Am just curious to know why it happens like this .
Can you please clarify me ?

Migration Key - How to Open a CSS Message

Hi Team,
We got the discovery system and asked SAP to get us a separate licence for mySAP ERP 2005. We got the CD-DVD's and SAP says that we can generate the licence key from the service marketplace. Now in the installation guide, it is mentioned that we should get the migration key by using CSS and opening a message in CSS Component: CA-SOA-DS. When I go the tab "Report Product Error" in CSS, the table control which displays the systems is still blank. I cannot go to the next step and open a message to request migration key. We really don't want to install the CD-DVD's on a separate server. We just want to get the discovery system up and running and it looks like without the migration key we can't proceed further.
Questions:
1) How do I start a CSS message without the system number getting displayed in the service marketplace. I have the installation number etc with me.
2) Do we have to install and run something else prior to asking for migration key?
Please respond as this is causing problems. Your help will be much appreciated.
Thanks

Hi Sachin,
I'll try to shine some light on the topic you brought up.
The Discovery System is shipped already pre-installed on the hardware. Thus there are no CD-DVD's that would allow installation on a seperate system. It follows the concept of an appliance.
To license it you need to have a valid license for SAP ERP on MS SQL. This is the installation number you will need to request the license key from Service Marketplace. If you don't have that in place (no license or on different DB) please contact your SAP counterpart.
Following the steps in the Quick Guide (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b22d4e44-0e01-0010-ffa4-fe9c59939e5e) in sequence should guide you through all the necessary activities.
Hope that helps,
rAimund

Migration from WLSM to WiSM

does anyone have a link or any reading material for migration from WLSM to WiSM. Also quick questions for all the expert or any body thats done this before.
1. Is it safe to install both the WiSM and also the WLSM in the save chasis during migration?
2. Will there be an issue running the same ssid on different vlans.
thanks for all the help before hand....

thx for the reply and the link. I have that link it is the only link i can find on cisco site for this migration, but it still didnt answer most of my questions. I will take this up with TAC. This migration is a big process and there is only a 10 page white paper on it. It doesnt seem right.

Suggestion on pocket drive and migration of iTunes to Pocket Drive

My computer is quickly getting filled up with all my music. I orginally used the default settings and had iTunes put all my music in My Documents-->My Music.
Since I am running out of space on this computer, I am thinking of getting a pocket drive and migrating my music there.
I have 2 questions:
1. Does anyone have any suggestions for pocket drives? I want one that will work/interface with iTunes well. I am looking at either:
1. Seagate - 160GB USB 2.0 Hard Drive with Pushbutton Backup - ST3160026A-RK
2. Seagate - Seagate USB 2.0 Pocket Hard Drives 5GB -ST650211U-RK
3. Iomega Silver Series 250GB USB 2.0 Hard Drive - 33215
4. Fantom Titanium 300GB USB 2.0 External Hard Drive -TFDU300
5. BUSlink 60GB 2.5" USB Hard Drive - DL-60-U2
Any suggestions/reviews for how any of these work with iTunes?
2nd question: How do I migrate my iTunes to this hard drive once I get it without messing up my iPod? Is there a suggested process for how to do this so I do not create problems for myself down the road?
Thanks,
Anne Sinha
Dell Latitude D600 Windows XP Pro Using ITunes

- Bump -
Anybody? Higher level iTunes experts?
Sorry for the lenght of the post :-) Just trying to be as clear as possible.
The question is actually simple.
How do I transfer the 10.7 MBP library to the second internal HDD of the Mac Mini, so that iTunes will work on this MM, without losing filepaths, ratings and playlists? And without having to copy it to the boot SSD disk first which will be too small to hold the library.

Server migration questions

Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have read through the migration docs but still I have a few questions I need answered/clarified.
1. When installing OES11 on the target server, I have to give it a name and bring it into the tree. When the migration takes place, will all instances of the target server, both in OES and SLES, get renamed to that of the source server? Most notably the internal server CA_default certificate, which gets named during OES installation.
2. Prior to migration and docs say to create the driver store and print manager on the target server. Do I just give them a temp name as the transfer ID task will rename everything when it runs?
3. The server being migrated is our CA server. My plan was to move the CA to a different server temporarily to another OES server, and once the migration is finished, move it back. Does that seem reasonable?
Thanks, Chris.

I hate when I do that.
>>> smflood<[email protected]> 12/12/2013 6:06 PM >>>
cmosentine;2297649 Wrote:
> Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have
> read through the migration docs but still I have a few questions I need
> answered/clarified.
Given that you are asking about migrating from OES2 SP3 to OES11 SP1
then I suggest reposting in the OES11 (Linux) Migration forum @
https://forums.novell.com/novell-pro...oes-migration/
as this is a NetWare-related forum.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
smflood's Profile: https://forums.novell.com/member.php?userid=617
View this thread: https://forums.novell.com/showthread.php?t=473395

What is the latest on the EP migration tools?

I am still looking for the tools for migration from EP 6.0 SP2 to the NW version of EP. Someone mentioned earlier they were planned for release on 2/16/2005 but there is nothing on the service marketplace yet. Can anyone provide any info here?
Thanks,
Stephen

Hi Colleagues,
We have a new Forum for all Migration related issues.
Please use the new forum sucj that all migration expertes will be able to answer the questions.
Regards,
Aviad

Migrating users from SBS 2003 to OSX leopard Server

Hello All,
We are preparing to migrate away from SBS2003 to an OSX server setup.
Currently all clients are mac with a few bootcamped PC's onto the macintosh hardware.
We will be using kerio to migrate the mail off from exchange.
My question is if there is a way to move the current users home folders on SBS to the mac server ala replication, i heard you could make the mac server a DC and then demote it to standalone ? is this possible or does everything have to be 'built from scratch' im assuming of course EVERYTHING is reliant on OSX leopard servers DNS being setup correctly from the get go.
Any help / tips/ cavaets / would be a huge help.
Best

unanswered

Which one is the best way in migration from sap bpc ms 5.1 to nw7.5

Hi,
I am doing Migration project from SAP BPC MS to NW.
In this which one is the best way migrating By manually or By using SAP Migration tool.
What are the merits and demarits migrating by manually.
The data is moving from MS to NW as it is by using sap migration tool.
Could you please answer my questions as early as possible.

Hi,
You would need manual effort anyways. Some of the objects are not either migrated or you need to update manually after the migration. Example, reports have to be modifed and as they may not work due to some of the options.
Also your packages, script logic etc have to recreated. So its upto you as the migration toosl takes across your appset, applications, dimensions and the master data etc. The manual involvement is inevitable. You need to probably take what the tool allows you to do and make manual corrections for the objects that are not supported.
Thanks,
Sreeni

Migration and Shared Services

Currently thinking about migrating two cubes: one in version 6 and one in version 7 to 11.1.2. Here are the steps I am considering following:
- Recreated the applications in EAS version 11.1.2.
- Copy over .otl, .rul, .csc etc files.
- The .cfg files in 11.1.2 - not sure what to do about this one. Do they have to be the same as in the previous versions? What do I do about the configuration settings that have changed from the old versions to new versions.
- Security. Version 6 and 7 dont have shared services. So does security have to be recreated from scratch?
I found a wealth of info on migrations on these forums, but these two particular questions evaded me.

For security have a look at the Advanced security manager, free tool :- http://www.appliedolap.com/free-tools/advanced-security-manager
Failing that you could look at extracting the security information using maxl/esscmd then pushing it into 11.1.2 using maxl or LCM
Cheers
John
http://john-goodwin.blogspot.com/

Migration of JSP forms into adobe forms for PCRs

Hi All,
I am working on Upgrade project for ESS/MSS. Our client had JSP based PCRs which we need to migrate into adobe based PCRs.
i have few questions regarding this migration.
Has someone the experience to migrate a JSP based PCR into Adobe based PCR?
How much effort the migration will take, and can we fully reuse ISR configuration and workflow?
Thanks,
Ankur

If you are using the SAP delivered JSP forms - there maybe equivalent SAP delivered Adobe based PCRs in the next ESS/MSS releases that you can use instead of migrating the forms
I am not aware of any tools or documentation that help to migrate custom JSPs to custom Adobe forms
As I see it you would have to create new Adobe based versions of your JSP PCRs - I am vaguely aware of a guide entitled
"Developing Your Own Personnel Change Requests" for ERP2004 - however I am not sure how you would obtain a copy
or whether this approach is recommended, supported or complete - this documentation would detail how to create an ISR based Adobe form
At the same time there may be restrictions as to what standard JSP forms are available as standard Adobe forms and what can be configured in the ISR scenarios (for example use of Value Help in WD JAVA Adobe scenarios)
- SAP have been recommending instead of creating say a ISR based Adobe form for WD JAVA to
use HCM processes and forms (also available in the MSS role) going forward
- HCM processes and forms is WD ABAP based framework using Adobe which allows users to create custom Adobe forms which update back-end infotypes directly from the Portal - also such scenarios as Value Help etc may be possible (or more easily achieved)
Best wishes
Stuart

How to migrate vShield to another vCenter?

I have a vCenter 5.1 infrastructure with 2 ESXi 5.1 hosts and vShield implemented with 2 Edges.
I need to migrate this 2 ESXi hosts to a new vCenter 5.5.
Migrate the hosts is not the problem, my question is: how I migrate vShield Manager, Edge, etc to the new vCenter (vShield Manager was already upgraded to version 5.5.x)?

Hello,
Best approach is to export your existing firewalls and rules from the first vShield Manager. Setup a new one within the new location. Import all the firewall rules into the new vShield Manager. You may have to fix up your networks on the firewalls however.
Best regards,
Edward L. Haletky
VMware Communities User Moderator, VMware vExpert 2009-2015
Author of the books 'VMWare ESX and ESXi in the Enterprise: Planning Deployment Virtualization Servers', Copyright 2011 Pearson Education. 'VMware vSphere and Virtual Infrastructure Security: Securing the Virtual Environment', Copyright 2009 Pearson Education.
Virtualization and Cloud Security Analyst: The Virtualization Practice, LLC -- vSphere Upgrade Saga -- Virtualization Security Round Table Podcast

Migrating Jolt 1.2 to Jolt 8.0 question

Similar Messages

Maybe you are looking for