Migrating mailboxes from 2010 to 2013

I have tried to migrate a mailbox between forest from Exchange 2010 to Exchange 2013 but when I run the new-moverequest on Exchange 2013 I get the following error
RemoteLegacy moves must involve Exchange 2010 or lower versions only.
Remote Moverequest dosn't work (The call to ‘https://mail.com/EWS/mrsproxy.svc’ failed. Error details: Could not establish trust relationship for the SSL/TLS secure channel with authority ‘mail.com’. –>
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. –> The remote certificate is invalid according to the validation procedure.)
Can i use RemoteLegacy moves, or only Remote?
Thanks.

When migrating mailboxes from Exchange 2010 to Exchange 2013, a Remote Moverequest must
be used.
Example: 
$Cred = Get-Credential (source\account)
New-MoveRequest -Identity [email protected] -Remote
-RemoteHostName mail.sourcedomain.com -RemoteCredential $Cred -TargetDeliveryDomain targetdomain.com
So with the above example, the certificate installed on the source server must include the name mail.sourcedomain.com and target server must trust the certificate.
Martina Miskovic

Similar Messages

  • Mailflow Problem After Migrating Mailbox From 2007 to 2013

    I thought I was at the point of migrating our mailboxes from 2007 to 2013.  I had created a new test mailbox on the 2013 server and changed all the DNS and virtual directories for the legacy on the 2007 server and was able to successfully send mail
    to the test mailbox out and in both internally and externally.  Then I migrated my first mailbox from 2007 to 2013 and things went south.
    I CAN NOT:
    Send e-mail from a mailbox on the 2007 server to the migrated mailbox on the 2013 server.
    Send e-mail from migrated mailbox to external e-mail address.
    I CAN:
    Send e-mail from the migrated mailbox to a 2007 mailbox and the test mailbox on the 2013 server.
    Send e-mail from the internet to the migrated mailbox and the 2013 test mailbox.
    I unfortunately am running Exchange 2013 with CU6 (I am already aware of the activesync issue and delegation crash issue but saw the info too late).
    Suggestions please!!

    Hi,
    Before going further, I'd like to ask the following questions to troubleshoot the issue:
    1. Could you send email from 2007 mailbox to the test mailbox on 2013 server? 
    2. Did you get any NDR message when sending email to the migrated mailbox failed?
    In addition, I recommend you try the following methods to find out the root cause:
    1. Try to use message tracking tool in exchange 2007 server ,it will help us to find the email which was sent to the migrated mailbox .
    2. Run the following command to check the permission groups of the receive connector:
    Get-Receiveconnector |fl Name,PermissionGroups,Exchangeversion
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Migrated mailbox from 2007 to 2013 now unable to connect to Samsung S4

    I'm in the process of migrating from 2007 to 2013.
    I have moved successfully a several mailbox's from Ex2007 to Ex2013.  Currently, all the EAS policies reside on the 2007 server and I have been successful reconnecting all the smartphones so far. 
    However, I have a Samsung S4 that is refusing to connect.   Any ideas what I need to do?
    Penny Miller
    PennyM

    I checked the phone settings in his OWA account and it is blank.  How can I add it in?
    Penny
    PennyM

  • File Attachments in Conferences: Permissions don't follow when upgrading from 2010 to 2013

    Hello all,
       Here at Unisys we are upgrading our Lync Enterprise Infrastructure from 2010 to 2013.  We have found that when we do this, any conference that has an attached file the permissions of the file do not follow.  The
    options for a file permissions are Organizer, Presenter, and Everyone.  If in 2010 it is Everyone, after the upgrade, it is always reset to Organizer.  Not a big deal, but every user will need to be trained to
    go back in and reset the permissions on the file, else, they will not be visible by the other conference attendees. 
       We have a case open with Microsoft on this, and I've scoured the web trying to find others that have seen this.  Any thoughts? 
       Thanks, and it's very cold in Texas today :-)
    Jason Weaver
    Jason J. Weaver

    Thanks for the update Eason.
    Here are a few notes from the Msoft case that we are not 100% in agreement with:
    This is not only in the case of migrating user
    from 2010 to 2013. This happens even when the user is not migrated to 2013.
    You can reproduce the behavior by joining the same meeting in 2010. This is a
    default behavior of meeting configuration and this has been set this way for
    security reasons so that if organizer is not present, nobody can view the
    attachments without the permission of organizer.
    However, when we test in our environment, we can add the attachment and like you say, it is set to EVERYONE.  When we exit the meeting and rejoin with OR WITHOUT the organizer present, the attachment is still there, Everyone can see it. 
    However, when we migrate users from 2010 to 2013, the attachments are set to organizer only. 
    Go figure.  Not the end of the world, we just need to make sure we are able to explain to our users that the attachments are still there and that the organizer of each meeting will need to go back in and re-permission each conference. 
    Take care, see you all in Vegas-
    Jason J. Weaver

  • Migrate mailboxes from Exchange 2013 to Exchange 2010

    Hello,
    We have a merger and would like to know if it is possible to migrate mailboxes from Exchange 2013 to Exchange 2010 in a cross-forest scenario.
    Or should we first upgrade destination Exchange 2010 to 2013?
    Peteris

    Hi Peteris,
    Based on my tests, we can move mailboxes from Exchange Server 2013 to Exchange server 2010. You can use the Prepare-MoveRequest.ps1 script in the EMS to prepare mailboxes for cross forest moves.
    For more information about it, here is a helpful article for your reference.
    Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
    http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
    Hope my clarification can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Custom Auto Attendant Prompts through TUI not working for users who migrated from 2010 to 2013

    In Exchange 2010, we started using unified messaging and set up Auto Attendants. We setup a admin role/RBAC for people of a security group to be able to update the message on the auto attendants. They have the UMPrompts assigned role. All of this is working
    great in 2010. We have now migrated to 2013, and the users who were migrated from 2010 to 2013 can no longer update the messages through TUI. Newly created 2013 users can and are assigned the EXASCT same permission as the users who have been doing this for
    well over a year on 2010.  When they call the AA and press #,* they are asked to provide their extension, after doing so the system tells them that extension is not correct. and asks for the extension again.  Newly created users with the same permissions
    get prompted for their PIN and can log in and change the message just fine. 
    Confirmed Bug?  anybody else having this issue?
    What would be different for this process between a user who was migrated from a previous version like 2010 compared to a newer user who has only ever existed on 2013?

    What if the migrated 2010 users are in the same DB as the system mailbox? I had a similar issue during a migration; http://www.skypeadmin.com/2014/11/10/known-issue-um-automated-attendant-tui-editing-broken-migration/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Exchange server name not changing in mail profile after migration from 2010 to 2013

    Following a migration from 2010 to 2013 we are finding that for a number of users the old exchange server address stays in the mail profile (control panel -> mail -> e-mail accounts) which causes Outlook not to load.
    We are able to go into control panel -> mail -> e-mail accounts and change this manually to the new exchange 2013 server address but we have quite a number of users and don't really want to do it manually.
    Shouldn't it be updating automatically and if so why is it?

    Hi,
    Yes, it should be changed by autodiscover. Does this issue occur to all the migrated users?
    I have seen this kind of issues before when migrating from Exchange 2003/2007 to Exchange 2010. The most efficient way is to rebuild the Outlook profile.
    Thanks,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Export mailbox from 2010 (sp3) and import into 2007 Sp3 rollup 10

    I have no issue exporting the mailbox from 2010.  
    The issue is importing into 2007.  I have a 2003 32 bit server with outlook 2003 sp2 running etc.  Every time I try to import I get the below error.  Is this even supported?
    I've scoured the web, tried fixmapi, added permissions, different switches, etc.  The pst attaches fine to the mailbox without issues.
    [5/15/2014 8:15:51 AM] [0] [2007import2] Opening Exchange mailbox.
    [5/15/2014 8:15:51 AM] [0] [ERROR] Error was found for 2007import2 ([email protected]) because: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147221219
    [5/15/2014 8:15:51 AM] [0] [2007import2] The operation has finished.
    Any help or sugesstions would be great!

    Steve I see that Belinda suggests that this may be a bug and that you are on SP3, however it may be that you need to update your systems completely to see if the issue is resolved.  To be able to find the actual patch level you are on you would need
    to follow the steps below.  Once you know your actual patch level you can either just update to the latest and greatest and try again OR read through the various fixes for each patch newer then what you have applied
    1.    This is the link for the Exchange Server Build #'s including Service Packs 
    http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-builds-numbers.aspx
    a.    Only thing you will not find in this list are the IU (Interim Update #’s) because they are unofficial patches to fix specific issues and then must be uninstalled before moving on to the next RU, CU or SP.
    2.    To find the SP, RU, CU level that your server is on use this Powershell command.  
    GCM exsetup |%{$_.Fileversioninfo}
    EXAMPLE 1:  Below is the result from a server with 2010 SP1 RU6 installed and you will see this referenced in the above link
    Product Version         File Version          File Name
    14.01.0355.002           14.01.0355.002   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
    EXAMPLE 2:  Below is the result from a server with 2010 SP1 RU6 installed WITH an IU from MS and you will not see this version referenced in the above link but it is sequential, i.e. SP1 RU6 is .002 and the IU is 003.  So in short by looking at this
    and the above link you could easily infer that this system has SP1 RU6 with some type of IU installed.
    ProductVersion   FileVersion      FileName
    14.01.0355.003   14.01.0355.003   C:\Program Files\Microsoft\Exchange
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • User metadata values is showing as plain text in Mysites after upgrading from 2010 to 2013

    We have upgraded our Mysite from 2010 to 2013, after upgrading User metadata values is showing as plain text where
    as in 2010 it has shown as hyperlinks.
    In Mysite 2010 by clicking on user metadata for favorite sports, Favorite Movies etc...it will give the results from search containing same value for other user
    by going to search results page. After upgrading it to 2013 (with 2010 UI) and running full crawls, I am able to search by clicking on any user property.
    After upgrading look and feel to 2013 version  these fields showing as plain text. Can anyone suggest how can we get hyperlinks and how can we make user
    metadata searchable directly by clicking on Property value from Mysite. Below screen print explain you the difference clearly.
    Santosh

    Hi Inderjeet, thanks for the update.
    I am running with SP1 + july2014 CU.
    Search is working fine, I am able to get search results from search page, here the problem is I cannot go to search results by directly clicking on a property.
    In SP 2010, If I click on favourite sports team, (Chelsea football) it will open search results page with all users who have given this team name.
    Where as in SP 2013, this data is appearing as plain text in mysites(Please note before UI upgrade, I am able to search as in SP 2010). You can notice the difference in my above screenshot.
    Is this default behaviour in SP 2013? Has anything changed or am I missing something.
    Santosh

  • [RESOLVED]migrate public folder 2010 to 2013 enable-mailpublicfolder

    hi
    i m migrating public folder 2010 to 2013
    when i di this : :
    Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics -IncludeReport | Format-List
    i have a lot of line like that :
    00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-36-B9-C6-5D-38-99-D6-11-9B-D6-00-08-02-55-A6-70-00-00-00-18-33-94-00-00 ». Ce dossier peut être
    lié manuellement en exécutant la cmdlet Enable-MailPublicFolder une fois la migration terminée.
    23/05/2014 19:18:02 [serveur] Avertissement : échec de recherche ou de liaison de l'objet destinataire « 96-7D-85-6C-DC-A6-83-42-AC-77-A4-5E-BD-CD-52-9B » dans
    Active Directory pour le dossier public à extension messagerie « Public Root/IPM_SUBTREE/Secrétariat RC/PAYS/VENEZUELA/2006/SINCOR » avec l'ID d'entrée «
    00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-36-B9-C6-5D-38-99-D6-11-9B-D6-00-08-02-55-A6-70-00-00-00-13-4D-8A-00-00 ». Ce dossier peut être
    lié manuellement en exécutant la cmdlet Enable-MailPublicFolder une fois la migration terminée.
    23/05/2014 19:18:52 [serveur] Avertissement : échec de recherche ou de liaison de l'objet destinataire « 25-86-EC-2D-ED-25-C6-49-83-B6-5F-E9-8C-2E-34-A4 » dans
    Active Directory pour le dossier public à extension messagerie « Public Root/IPM_SUBTREE/Secrétariat RC/Repertoire 2007 » avec l'ID d'entrée «
    00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-36-B9-C6-5D-38-99-D6-11-9B-D6-00-08-02-55-A6-70-00-00-00-11-F5-9D-00-00 ». Ce dossier peut être
    lié manuellement en exécutant la cmdlet Enable-MailPublicFolder une fois la migration terminée.
    23/05/2014 19:18:57 [serveur] Avertissement : échec de recherche ou de liaison de l'objet destinataire « ED-80-51-1F-67-6A-B9-41-AA-B8-0C-14-C4-BF-07-A3 » dans
    Active Directory pour le dossier public à extension messagerie « Public Root/NON_IPM_SUBTREE/EFORMS REGISTRY/Organization(409) » avec l'ID d'entrée «
    00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-36-B9-C6-5D-38-99-D6-11-9B-D6-00-08-02-55-A6-70-00-00-00-00-1F-49-00-00 ». Ce dossier peut être
    lié manuellement en exécutant la cmdlet Enable-MailPublicFolder une fois la migration terminée.
    i don't know what is it about? what to do ?...
    can you help me please?

    Meanwhile, you can check-out few below mentioned resources to troubleshoot PF migration in exchange 2010 : http://justaucguy.wordpress.com/2013/08/22/troubleshooting-a-public-folder-migration-to-2013/
    http://www.petenetlive.com/KB/Article/0000789.htm
    You may also refer to this helpful resource(http://www.exchangemigrationtool.com/) that would be a good assistance in order to migrate public folders between exchange 2010 and 2013.

  • Upgrading SharePoint from 2010 to 2013 with Farm Solution

    Hi All,
    I am working on multiple SharePoint versions. 
    I have to migrate the SharePoint 2010 to 2013. This is having multiple procedures but what about the Farm solution? I found the answer on
    this link.
    But I did not found any details about the impact on the workflows. I am using Visual Studio 2010 Workflows for the approval process.
    should I need to restart the workflows again? All tasks will be deleted. I don't want lost my tasks and history details.
    Waiting for your valuable reply.
    Thanks.
    - Khan Abubakar Disclaimer: The opinions expressed herein are my own personal opinions and do not represent any others view in anyway.

    Hi,
    According to your post, my understanding is that you wanted to know the impact on workflow when migrating the SharePoint 2010 to 2013.
    For SharePoint 2010 custom activities to work in SharePoint 2013, the “authorizedType” node needs to be defined in a new sub-section “targetFx” under the “authorizedTypes” section. If this is not changed, an error will be encountered: ‘The type or namespace
    name '?' could not be found (are you missing a using directive or an assembly reference.'
    You can refer to the following article which about how the authroizedTypes were setup in SharePoint 2010 vs how they should be setup in 2013.
    http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/05/09/migrating-sharepoint-2010-workflow-custom-activity-to-sharepoint-2013.aspx
    There are three ways in which you can upgrade and version a workflow.
    Option 1: Move all content to new site and re-execute incomplete workflows.
    Option 2: Code workflow so it can continue or restart all in-process workflows.
    Option 3: Run old workflows to completion with old assembly and new workflows with new assembly.
    More reference:
    http://kmsnet.blogspot.in/2013/07/upgrade-custom-workflow-in-sharepoint.html
    http://habaneroconsulting.com/Insights/Approach-to-upgrading-custom-SharePoint-workflows.aspx#.UwK-s_mSx8A
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Jason Guo
    TechNet Community Support

  • Mailbox Move from 2010 to 2013 Completed with Warning and Stuck

    I have been moving mailboxes from Exchange 2010 to Exchange 2013 and was on my last batch when all the mailboxes Completed except for one which Completed With Warning.  It shows 0 bad items.
    In Exchange 2010, all the mailboxes that are part of this failed batch show they are still in the Move Request state.
    On the mailbox in Exchange 2013 Migration that shows Completed with Warning, the following details are provided:
    Error:                        
    MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The process failed to get the correct
    properties. --> MapiExceptionTimeout: Unable to get properties on object. ‎(hr=0x80040401, ec=-2147220479)‎ Diagnostic context:    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=342]    Lid: 43559  
    EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x80040401][length=178][latency=60009]    Lid: 32881   StoreEc: 0x80040401    Lid: 50035      Lid: 64625   StoreEc: 0x80040401   
    Lid: 52176   ClientVersion: 15.0.847.32    Lid: 50032   ServerVersion: 15.0.847.6032    Lid: 50128      Lid: 1494    ---- Remote Context Beg ----    
    Lid: 43632   StoreEc: 0x80040401    Lid: 42272   StoreEc: 0x80040401    Lid: 36392   dwParam: 0x1    Lid: 50904   StoreEc: 0x80040401    Lid: 35992  
    StoreEc: 0x80040401    Lid: 1750    ---- Remote Context End ----     Lid: 1494    ---- Remote Context Beg ----     Lid: 43632   StoreEc: 0x80040401   
    Lid: 42272   StoreEc: 0x80040401    Lid: 36392   dwParam: 0x1    Lid: 50904   StoreEc: 0x80040401    Lid: 35992   StoreEc: 0x80040401    Lid: 1750   
    ---- Remote Context End ----     Lid: 50288      Lid: 23354   StoreEc: 0x80040401    Lid: 25913      Lid: 21817   ROP Failure: 0x80040401   
    Lid: 20385      Lid: 28577   StoreEc: 0x80040401    Lid: 32001      Lid: 29953   StoreEc: 0x80040401    Lid: 62128      Lid: 38144  
    StoreEc: 0x80040401
    Report:                        
    [email protected]
    Any idea what steps to take to complete this move from here?
    Thanks,
    Brett Gibson
    Brett Gibson

    From the EMC on the Exchange 2013 (destination) I get:
    DisplayName               StatusDetail              TotalMailboxSize         
    TotalArchiveSize         PercentComple
    Jason Osborne             Completed                 6.029 GB (6,474,008,69...                         
    100
    Brent R. Holl             Completed                 4.102 GB (4,403,992,89...                         
    100
    Nathan Harsin             Completed                 3.321 GB (3,565,830,88...                         
    100
    Don Barrett               Completed                 11.1 GB (11,916,695,17...                         
    100
    Larry Michael             Completed                 3.705 GB (3,978,717,79...                         
    100
    Danyl Gonterman           Completed                 4.165 GB (4,471,791,08...                         
    100
    Jason Mullanix            Completed                 1.569 GB (1,684,906,68...                         
    100
    Eric Brown                Completed                 5.662 GB (6,079,329,50...                         
    100
    Nick Cacciola             Completed                 1.992 GB (2,139,080,78...                         
    100
    Dorothy M. Jones          Completed                 11.34 GB (12,181,530,1...                         
    100
    orders                    Completed                 3.632 GB (3,899,673,39...                         
    100
    Terrie Bumpus             Completed                 14.2 GB (15,249,956,21...                         
    100
    Sean Stepp                Completed                 2.55 GB (2,738,494,989...                         
    100
    Joshua Stolberg           Completed                 3.055 GB (3,280,581,92...                         
    100
    Josh Stremme              Completed                 2.571 GB (2,761,019,42...                         
    100
    Casey Jones               Completed                 1.614 GB (1,732,737,86...                         
    100
    Larry Gray                Completed                 2.545 GB (2,732,725,42...                         
    100
    Kelly Gray                Completed                 1.91 GB (2,050,883,915...                         
    100
    Bill Daugherty            Completed                 5.993 GB (6,434,784,87...                         
    100
    Laura Billstrom           Completed                 1.343 GB (1,442,466,39...                         
    100
    Adam Yates                Completed                 1.14 GB (1,224,119,328...                         
    100
    Eli Malooley              Completed                 606.8 MB (636,282,187 ...                         
    100
    Chad Ayers                Completed                 1.213 GB (1,302,645,29...                         
    100
    Nick Galvin               Completed                 815.9 MB (855,568,875 ...                         
    100
    Stephane Martin           Completed                 556.4 MB (583,443,766 ...                         
    100
    Todd Neal                 Completed                 222.5 MB (233,256,684 ...                         
    100
    Eric Botsford             Completed                 17.13 MB (17,962,734 b...                         
    100
    Archiving                 CompletedWithWarnings     138.6 GB (148,830,505,...                         
    100
    Running the same command on the source Exchange 2010 Server I get the following:
    [PS] C:\Windows\system32>Get-MoveRequest |Get-MoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (0:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (1:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (2:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : F4AB2B5B,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (3:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (4:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (5:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (6:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (7:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (8:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (9:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (10:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (11:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (12:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (13:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (14:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (15:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (16:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (17:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (18:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (19:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (20:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (21:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (22:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (23:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (24:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (25:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (26:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Failed to communicate with the mailbox database.
        + CategoryInfo          : ResourceUnavailable: (27:Int32) [Get-MoveRequestStatistics], AccessDeniedException
        + FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
    Thanks,
    Brett
    Brett Gibson

  • How do I know what are custome code deployed on my site for Migration from 2010 to 2013

    We have around 500 sites and several Webapplication. Now we want to migrate site from SharePoint 2010 to 2013
    We will use Metalogix tool for Migration. However we want to know which custom changes site Have , SO those WSP we can deployed on 2013, So that Site will work fine After Migration.
    SO question is there is any way where I can find what customization site have ?
    I want poweshell which will tell me these WSP have deployed on this Sitecollection , SO that only those I will deploy on 2013 ? ALso
    Suppose I have created Workflows through designer , is there any powershell which will tell me these workflow have deployed on particular site, so that I can check is those Migrated successfully or not.
    Please mark answer , if you think answer is helpful or correct.

    Hi,
    Please see the link below that will give you detailed steps to identify customizations
    Checklist for upgrade
    Cheers
    FrenchSpeaker - MCTS

  • Web-part issue after migrating from 2010 to 2013

    Hello all
    Correct me if I am posting this question in the wrong section.
    The background is: Migrating and Upgrading SP2010 to SP2013. I did it, and alot of it works, as it should, though I have one issue.
    I did deploy all the solutions to both the 14 and 15 hive, and activated all the propper features. Now, I have one web-part which breaks down. It is a Web-part that communicate with a SAP endpoint, to retrive some data and show dem. The Web-part work fine in
    the 2010 environment.
    As soon as I enter the site where the Web-part is placed in, I am being redirected to the "Maintanence Web-part, error message". If I delete the Web-part I can access the site with no errors. The code works fine in 2010. 
    The error I am getting is "value cannot be null".
    Unexpected System.ArgumentNullException: Value cannot be null. Parameter name: uriString at System.Uri..ctor(String uriString) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at MyWebPart.Core.ListConfiguration.<>c__DisplayClass1.<GetKeyValue>b__0()
    at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
    secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at MyWebPart.Core.ListConfiguration.GetKeyValue(String key) at MyWebPart.OrderCatalog.OrderCatalogUserControl.FillFilterBoxes() ... 438bb29c-c202-3049-9aab-e895c85176d5
    Unexpected ...at MyWebPart.OrderCatalog.OrderCatalogControl.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.AddedControl(Control control, Int32 index) at MyWebPart.OrderCatalog.OrderCatalog.CreateChildControls()
    at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal()
    at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesB... 438bb29c-c202-3049-9aab-e895c85176d5
    Unexpected ...eforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 438bb29c-c202-3049-9aab-e895c85176d5

    No, I did not migrate the content from 2010 web-config to the 2013 server. This is something I will take a look at, to see if there are some missing points in the config-file of 2013.
    And just to be sure, when we are talking about the config file, it is the one who is associated with the Web-applikation? So, IIS --> WebApp --> Explorer --> and that web.config?

  • How to migrate Custom Reports from 2010 to 2013

    We are considering upgrading from Project 2010 to 2013 and one of our users noticed there are no Custom Reports or canned reports available.
    On her computer with Project 2010, when she selects Reports-Custom Reports, there are numerous canned reports available.
    On the test computer, with Project 2013, when she views Custom Reports, it is empty.
    How do we get the Custom Reports moved from her computer with Project 2010 to the test computer with Project 2013?
    thank you in advance for any assistance you can provide.
    Geemail

    Thus I guess you are using the new reports feature in MS Project Pro 2013 (as per my 2nd screenshot)?
    I would say that this feature aims at giving reports summarizing projects information in a global way, based on criterion specified by the user (cost, time period, tasks, resources..).
    I don't know how to bypass this limitation (which doesn't mean that it is not possible).
    But I'd advice as it says in the report tip to filter in order to emphasize on what makes sense for the user (incomplete tasks, overdue tasks, overallocated resources...) in order to use it like a dashboard more than like a detailed report.
    If your objective is to provide detail reports (and if you're using project server), I'd suggest to use more advanced BI features such as Excel Services or SSRS.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

Maybe you are looking for

  • My phone problem

    My Phone Problem In April 2013 I signed 2 year with me and my wife. I picked an HTC android phone that they had offered when you sign up for I think $50-100. In November I accidentally cracked the screen. I went to the local store where I bought the

  • ITunes match isn't working with new Macbook Pro

    Hello everyone, I have had iTunes Match for years with no problems on any device mobile or otherwise. I just purchased a new Macbook Pro w/Retina. I unboxed, powered up, and updated all software. I set up the Macbook with my one and only apple ID and

  • Key figure description not show in BEx and WAD sometimes

    Hi experts! I have a big problem. Sometimes we have the effect that a report shows no key figures. I mean I see the numbers but no key figure description is shown. Example (correct) Country |    Hierarchy   |        Banking      |         ATM       |

  • I can't download Safari the newest version on my macbook file dmg.

    I can't find it on the apple downloads page but I cannot download it. Is there any other way for me to download safari the beta newest version. Do you have direct links that is downloadable for mac OS X dmg.

  • Mail almost launches but won't open properly

    Hi all I'm running Mac OS 10.4.10 on a G4. I've never had a problem with Mail but since yesterday it's failed to work. I click to open the program, it bounces in the dock, the menu bar at the top says "Mail" but I cannot get any further and control-c