Migrating mailman from 10.5 to 10.6 Server

I am currently in migrating my home server from 10.5 running on a Xserve G4 to 10.6 on an Intel Xserve.
I wanted to document how I migrated my mailman setup from the old to the new server. This may be obvious to many readers of this forum, but I didn't readily find it explained anywhere. It was simple:
1. Boot old server into Target Disk Mode and connect to new server via FireWire.
2. Turn off mail service in Server Admin.
3. In Terminal issue the commands
sudo mv /var/mailman /var/mailman-stock
sudo mkdir root:wheel /var/mailman
sudo chmod 775 /var/mailman
sudo ditto -V /Volumes/<old server OS drive>/var/mailman/ /var/mailman/
4. Turn on mail service in Server Admin.
Done.
Message was edited by: D. Hoffmann

Hello, I have checked a bit more.
When I have replaced the original /private/var/mailman/locks directory:
rwxrwsr-x@ 2 root _mailman 68 11 11 00:05 locks
with new one like:
drwxrwxrwx 4 root _mailman 136 11 11 18:15 locks
the Permission denied error on this directory stops but it generate another permission error like
post(34854): IOError : [Errno 13] Permission denied: '/private/var/mailman/qfiles/in/xxx.pck.tmp'
I guess that proper file mode for Mailman has been changed in 10.6. If there are someone running the mailing list server on 10.6, would you tell me the file mode of these directory, or just a result of following command:
'ls -l /private/var/mailman'
Thanks.

Similar Messages

Migrating applciation from weblogic to oracle 9i application server(OC4J)??????

Hi,
I am migrating my ejb application from weblogic to oracle 9i application server.What changes are needed to be made in code and what configuration changes are required.
In my application i use a couple of session beans wherin a session bean calls the method of the other session bean which acceses the database.I am using a jdbc thin driver for the database connection. is it possible for a session bean to call a method of another session bean which access the database??This concept works well in weblogic where the current application is running.
The problem is that while migrating the application to the orion server, it gives an OrionCMTException ...
memory leak..etc.
Could any one clarify.
Thanks in advance!!!

Hi Avi and Harrison,
Cease Fire avi!!!!.First of all let me clear the issue of posting the same problem twice.Well, when i mentioned the problem the first time , i found the title session bean deployment was not right and few people would look into it as it was a common problem so i thought it would be appropriate if i mentioned the title correctly , so i posted the query again with the change in title.
Now coming to the answer for ur questions.
The platform used is MS Windows NT.
The (OC4J) version is 1.0.2.2.1.
I am not using JDeveloper.
The database is oracle 8i and i am using the thin driver.
The beans to be deployed are stateless session beans.
The client involved is a web client i.e a jsp application.
The first session bean is as follows.
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import java.sql.Timestamp;
import java.rmi.RemoteException;
import java.util.Date;
import javax.ejb.*;
import javax.naming.*;
import initcontext;
import PrintMessage;
import JB_B2B_ERROR_PARSER;
* @stereotype SessionBean
* @homeInterface DB_UTILITYHome
* @remoteInterface DB_UTILITYRemote
public class DB_UTILITY implements SessionBean
     private SessionContext context;
private ResultSet rs = null;
private Statement stmt = null;
private Connection con = null;
private PrintMessage print = null;
public DB_UTILITY()
rs = null;
stmt = null;
con = null;
print = new PrintMessage();
     public Connection getConnection()throws RemoteException
          InitialContext initctx = null;
          Connection con = null;
          try
               initctx = initcontext.getContext();
               javax.sql.DataSource ds =
(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
               con = ds.getConnection();
//(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
catch(NamingException namingexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", namingexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("AppError",
"Epool-10001", "DB_UTILITY.getConnection"));
catch(SQLException sqlexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception),
"DB_UTILITY.getConnection"));
catch(Exception exception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("EpoolError",
"Epool10005", "DB_UTILITY.getConnection"));
          return con;
     public String getDate()throws RemoteException
          String Date=null;
          try
               con=getConnection();
               stmt=con.createStatement();
               rs=stmt.executeQuery("SELECT
TO_CHAR(SYSDATE,'YYYY-MM-DD HH:MI:SS') FROM DUAL");
               while(rs.next())
                    Date=rs.getString(1);
               stmt.close();
               con.close();
catch(SQLException sqlexception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception), "DB_UTILITY.getDate"));
catch(Exception exception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("epoolError",
"Epool10005", "DB_UTILITY.getDate"));
finally
try
if(con != null && !con.isClosed())
con.close();
catch(Exception exception2)
stmt = null;
con = null;
          return Date;
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
Also the xml files are as follows.
web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<display-name>AddressBook Web Application</display-name>

<description>Web module that contains an HTML welcome page, and 4 JSP's.</description>

<welcome-file-list>
<welcome-file>B2B_COUNTRY_CODE.jsp</welcome-file>
</welcome-file-list>
<ejb-ref>
<ejb-ref-name>SB_B2B_COUNTRY_CODEHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>SB_B2B_COUNTRY_CODEHome</home
<remote>SB_B2B_COUNTRY_CODERemote</remote>
</ejb-ref></web-app>
Application.xml
<?xml version="1.0"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN" "http://java.sun.com/j2ee/dtds/application_1_2.dtd">
<application>
<display-name>Country Code</display-name>
<module>
<ejb>epool_CountryCode-ejb.jar</ejb>
</module>
<module>
<web>
<web-uri>epool_CountryCode-web.war</web-uri>
<context-root>/epool_CountryCode-web</context-root>
</web>
</module>
</application>
ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN" "http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd">
<ejb-jar>
<description>epool_CountryCode</description>
<enterprise-beans>
<session>
<display-name>CountryCode Session
Bean</display-name>
<ejb-name>SB_B2B_COUNTRY_CODERemote</ejb-name>
<home>SB_B2B_COUNTRY_CODEHome</home>
<remote>SB_B2B_COUNTRY_CODERemote</remote>
<ejb-class>SB_B2B_COUNTRY_CODE</ejb-class>
<session-type>Stateless</session-type>
<ejb-ref>
<description>EJB Epool DButility</description>
     <ejb-ref-name>DB_UTILITYRemote</ejb-ref-name>
               <ejb-ref-type>Session</ejb-ref-type>
               <home>DB_UTILITYHome</home>
               <remote>DB_UTILITYRemote</remote>
          </ejb-ref>
          <ejb-ref>
          <description>EJB Entity Bean</description>
<ejb-ref-name>EB_B2B_COUNTRY_CODERemote</ejb-ref-name>
               <ejb-ref-type>Entity</ejb-ref-type>
               <home>EB_B2B_COUNTRY_CODEHome</home>
          <remote>EB_B2B_COUNTRY_CODERemote</remote>
          </ejb-ref>
</session>
<session>
<display-name>DbUtility Session Bean</display-name>
<ejb-name>DB_UTILITYRemote</ejb-name>
<home>DB_UTILITYHome</home>
<remote>DB_UTILITYRemote</remote>
<ejb-class>DB_UTILITY</ejb-class>
<session-type>Stateless</session-type>
</session>
<entity>
<ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
     <home>EB_B2B_COUNTRY_CODEHome</home>
     <remote>EB_B2B_COUNTRY_CODERemote</remote>
     <ejb-class>EB_B2B_COUNTRY_CODE</ejb-class>
     <persistence-type>Container</persistence-type>
     <prim-key-class>EB_B2B_COUNTRY_CODEPK</prim-key-class>
     <reentrant>False</reentrant>
     <cmp-field>
     <field-name>country_code_desc</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>phone_format_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_date</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_phone_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_tax_percent</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>sort_order</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_modified</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_modified</field-name>
     </cmp-field>
     <resource-ref>
     <description></description>
     <res-ref-name>jdbc/ePool</res-ref-name>
     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
     </resource-ref>
</entity>
</enterprise-beans>
<assembly-descriptor>
     <container-transaction>
          <method>
               <ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
               <method-name>*</method-name>
          </method>
          <trans-attribute>Required</trans-attribute>
</container-transaction>
<security-role>
<description>Users</description>
<role-name>users</role-name>
</security-role>
</assembly-descriptor>
</ejb-jar>
The session bean which uses the above session bean is as follows.
import javax.ejb.SessionContext;
import javax.ejb.SessionBean;
import java.sql.*;
import javax.naming.Context;
import java.sql.Timestamp;
import java.util.Vector;
import initcontext;
import DB_UTILITYHome;
import DB_UTILITYRemote;
import EB_B2B_COUNTRY_CODEHome;
import EB_B2B_COUNTRY_CODERemote;
import EB_B2B_COUNTRY_CODEPK;
* @stereotype SessionBean
* @homeInterface SB_B2B_COUNTRY_CODEHome
* @remoteInterface SB_B2B_COUNTRY_CODERemote
public class SB_B2B_COUNTRY_CODE implements SessionBean
     private SessionContext context;
     * Sets the context of the bean
     * @param context The Bean's Context
     public Vector selectCountryCode(String query,String
countquery, String pagenos) throws Exception
          Context ctx = initcontext.getContext();
          Connection con=null;
          Vector records=new Vector();
          int pageno=Integer.parseInt(pagenos);
          int min=(pageno-1)*10;
          int max=pageno*10;
          int counter=0;
          boolean recordsfound=false;
          try
               DB_UTILITYHome home =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote remote =
(DB_UTILITYRemote)home.create();
               con=remote.getConnection();
               Statement stmt = con.createStatement();
               ResultSet rscount =
stmt.executeQuery(countquery);
               while(rscount.next())
                    int temp=rscount.getInt(1);
                    int pagecount=temp;
                    pagecount=pagecount/10;
                    if((temp%10)>0)
                    pagecount=pagecount+1;
                    records.addElement(""+pagecount);
               ResultSet rs = stmt.executeQuery(query);
               while(rs.next())
                    counter++;
                    if(counter>min && counter<=max)
                         String row[]=new String[8];
                         recordsfound=true;
                         row[0]=rs.getString(1);
                         row[1]=rs.getString(2);
                         row[2]=rs.getString(3);
                         row[3]=rs.getString(4);
                         row[4]=rs.getString(5);
                         row[5]=rs.getString(6);
                         row[6]=rs.getString(7);
                         row[7]=rs.getString(8);
                         records.addElement(row);
          con.close();
          catch(Exception e)
               System.out.println("Error in selecting Country
Code "+e);
               throw new Exception("Error in selecting Country
Code "+e);
          return(records);
     public void insertCountryCode(String country_code, String
country_code_desc, String country_phone_code, String
phone_format_flag,String active_flag, String sort_order,String
country_tax_percent)throws Exception
          Context ctx = initcontext.getContext();
          Double Sort_Order=null;
          Double cntry_tax_prct=null;
          if(sort_order!=null && sort_order.length()>0)
          Sort_Order=new Double(sort_order);
          if(country_tax_percent!=null &&
country_tax_percent.length()>0)
          cntry_tax_prct=new Double(country_tax_percent);
          String user_created=null;
          Timestamp date_created=null;
          Timestamp active_date=null;
          String user_modified=null;
          Timestamp date_modified=null;
          try
               DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote dbremote =
(DB_UTILITYRemote)dbhome.create();
               user_created=dbremote.getUser();
date_created=Timestamp.valueOf(dbremote.getDate());
               active_date=date_created;
               EB_B2B_COUNTRY_CODEHome home =
(EB_B2B_COUNTRY_CODEHome)ctx.lookup("java:comp/env/EB_B2B_COUNTRY_CODER
emote");
               EB_B2B_COUNTRY_CODERemote remote =
(EB_B2B_COUNTRY_CODERemote)home.create(country_code, country_code_desc,
country_phone_code,active_flag, phone_format_flag,user_created,
date_created, active_date, Sort_Order, user_modified,
date_modified,cntry_tax_prct);
          catch(Exception e)
               System.out.println("Error in Creating COUNTRY
Code "+e);
               throw new Exception("Error in Creating COUNTRY
Code "+e);
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
The jsp client which acces the beans is as follows.
<BODY >
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<%@ page import="initcontext" %>
<%@ page import = "java.util.*" %>
<%@ page import="DB_UTILITYHome"%>
<%@ page import="DB_UTILITYRemote"%>
<%@ page import="javax.naming.*"%>
<%Connection con=null; %>
<script src="search_getvalues.js">
</script>
<form name=frm1>
<%! int intCount,intI,intRowCount,intJ;
String strtname=new String();
String strhidden=new String("txthdn");
     Statement st;
     ResultSet rs;
     ResultSetMetaData rmeta;
....%>
<%
try
     Context ctx = initcontext.getContext();
     DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
     DB_UTILITYRemote dbremote = (DB_UTILITYRemote)dbhome.create();
     con=dbremote.getConnection();
     st=con.createStatement();
     rs=st.executeQuery(strsqlquery);
     rmeta=rs.getMetaData();
intCount=rmeta.getColumnCount();
....... %>
</form>
</BODY>
</HTML>
The resulting exception generated is as follows:
D:\oc4j\j2ee\home>java -jar orion.jar
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... done.
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e\epool_CountryCode-web.war... done.
Auto-deploying epool_CountryCode (New server version detected)...
Auto-deploying epool_CountryCode-ejb.jar (No previous deployment
found)... done.
Error deploying
file:/D:/oc4j/j2ee/home/demo/messagelogger/messagelogger-ejb.jar homes:
No javax.jms.Destination found a
t the specified destination-location (jms/theTopic) for
MessageDrivenBean com.evermind.logger.MessageLogger
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
Auto-deploying epool countryCode example (New server version
detected)...
************************1
************************2
COUNT QUERY :SELECT COUNT(COUNTRY_CODE) FROM BAP_COUNTRY_CODE
QUERY :SELECT
COUNTRY_CODE,COUNTRY_CODE_DESC,COUNTRY_PHONE_CODE,PHONE_FORMAT_FLAG,COU
NTRY_TAX_PERCENT ,SORT_ORDER,ACTIVE
FLAG,ACTIVEDATE FROM BAP_COUNTRY_CODE order by COUNTRY_CODE
Error in selecting Country Code java.rmi.RemoteException: Error
(de-)serializing object: com.evermind.sql.OrionCMTConnec
tion; nested exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
JB:Error in selecting country cd java.lang.Exception: Error in
selecting Country Code java.rmi.RemoteException: Error (d
e-)serializing object: com.evermind.sql.OrionCMTConnection; nested
exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
Error in Selecting Records
OrionCMTConnection not closed, check your code!
LogicalDriverManagerXAConnection not closed, check your code!
(Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... Error unpacking: IO Error:
The system cannot find the path specified
Error updating application epool_CountryCode: Unable to find/read
assembly info for D:\oc4j\j2ee\home\applications\epool_C
ountryCode\build\epool_CountryCode (META-INF/application.xml)
But if the DBUTILITY session bean is changed to a simple bean and accessed the code works fine and i am able to retrieve the data.Is the problem there because u one session bean cannot access a database connection method from another one or could it be because of the driver???
I hope i am clear.Please revert back in case any more references are needed.
Thanks in advance!!!!!!

Migrating users from SBS 2003 to OSX leopard Server

Hello All,
We are preparing to migrate away from SBS2003 to an OSX server setup.
Currently all clients are mac with a few bootcamped PC's onto the macintosh hardware.
We will be using kerio to migrate the mail off from exchange.
My question is if there is a way to move the current users home folders on SBS to the mac server ala replication, i heard you could make the mac server a DC and then demote it to standalone ? is this possible or does everything have to be 'built from scratch' im assuming of course EVERYTHING is reliant on OSX leopard servers DNS being setup correctly from the get go.
Any help / tips/ cavaets / would be a huge help.
Best

unanswered

Migrating wiki from 10.5 to 10.6 server

I am having trouble migrating my wiki from my leopard server to snow leopard server. This is the process I am doing.
1. create wiki group on snow leopard server with the same name as group on leopard server and turn off web service.
2. copied folder from /Library/Collaboration/group_name from 10.5 server to same location on 10.6 server.
3. edited ownership permissions to teamsserver:teamsserver on copied folder and sub-folders
4. rm index.db
5. edited GenereatedUID in the metadata.plist to match the GenereatedUID in Workgroup Manager for the group I created.
I am able to log in to the wiki and it takes me to the welcome that we have from the 10.5 server. The sidebar headings are the same. The problem is that I cannot see any of the entries or wiki pages that were created before. Is there something that I'm missing?

Here are the steps to manually migrate a wiki from 10.5 to 10.6:
sudo serveradmin stop teams
sudo mv $GROUP_DIRECTORY /Library/Collaboration/Groups/
sudo chown -R 94:94 /Library/Collaboration/Groups/$GROUP_DIRECTORY
sudo rm /Library/Collaboration/dataVersion.plist
sudo rm /Library/Collaboration/globalIndex.db
sudo rm /Library/Application Support/Apple/WikiServer/directoryIndex.db
sudo serveradmin start teams
You will then need to navigate to the wiki as an administrator and set the access permissions in the wiki's settings screen. There you can restrict access by directory users and/or groups (if you need that level of granularity).

Migrating application from weblogic 8.1 to Sunone server

I need to migrate enterprise application, currently deplyed in Weblogic 8.1, to Sunone server 7 or 8. Please provide some documentation help or if any tool is there to do that.
Thanks

There is a migration tool developed specifically for migration off WebLogic. Check out the following URL:
http://java.sun.com/j2ee/tools/migration/index.html

How can I migrate everything from one account to another on same computer?

How can I migrate everything from one account to another on same computer?

Transferring files from one User Account to another

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Error while migrating reports from one instance to another(no torch seen)

Hi,
I am facing this problem when I am trying to migrate reports from UAT to Production. After migration when I try to run the report from Discoverer plus, I cannot see the torch symbol which is general if we have any parameters for that report. So, I again migrate the same .eex file and now I see the torch.
Can any one throw some thoughts why is this happening, why I cannot see the torch symbol in the first time itself?
Thanks,
Srini.

Hi Srini
The list of values is not being associated with the item the first time around. The order in which the items are selected is important so for example if lists of values were imported first without the items upon which they depend they will be ignored. Running the import a second time will cause the LOVs to recognize their associated item and thus the association will be made.
Generally I do two exports. I will export my folders and workbooks first and then export my item classes.
Hope this helps explain what you are seeing.
Best wishes
Michael

Migrating menues from oracle 11i to R12

Hi all,
I have to migrate Menus from Oracle 11i to R12, this can be done using FND_LOAD, but we have to migrate it using API's. Please suggest me the API name and approach. Currently I am investigating on fnd_menus_pkg.load_row and fnd_menu_entries_pkg.load_row . Please let mw know if these are the correct API's to migrate Menus. Any help is appreciated.

If the version of $FND_TOP/patch/115/import/afsload.lct and the table structure is identical on both instances, you may use FNDLOAD for your custom menus. However, I would not recommend using FNDLOAD or any API between different application releases.
How To Download a Parent Menu and Submenus [ID 369421.1]
Replicating Custom Menu [ID 839879.1]
Thanks,
Hussein

Migrating report from 6i to 11g

I am migrating reports from 6i to 11g.
I am calling report from form. All the reports works fine.
But in this report I have to pass parameter at runtime and report should save in pdf format at a given location.
forms & report version : 11.1.2
Database : 11g
Operating system : windows 7 professional.
Below is the code i am running.
declare
pl_name VARCHAR2(30) := 'tempdata';
pl_id ParamList;
x VARCHAR2(150);
y NUMBER;
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('MALWADKARCONSUMPTIONSTMTDBR1');
pl_id := Create_Parameter_List(pl_name);
Add_Parameter(pl_id,'background',TEXT_PARAMETER,'Yes');
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER, 'FILE') ;
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER, 'PDF') ;
Add_Parameter(pl_id,'VCOMPANY',TEXT_PARAMETER,:block50.COMPANYNAME);
Add_Parameter(pl_id,'VLYCOMPANY',TEXT_PARAMETER,:block50.COMPANYNAME);
Add_Parameter(pl_id,'FROMDATE',TEXT_PARAMETER,VFROMDATE); -- VFROMDATE calculated from query
Add_Parameter(pl_id,'TODATE',TEXT_PARAMETER,:BLOCK50.DOCDATE);
Add_Parameter(pl_id,'VACNAME',TEXT_PARAMETER,VACNAME); -- VACNAME calculated from query
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, 'D:\dbr\'||vACNAME||' '||:BLOCK50.DOCDATE||'.PDF') ;
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
set_report_object_property(repid,report_filename,'D:\dbr\'||vACNAME||' '||:BLOCK50.DOCDATE||'.PDF' );
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_adminserver_paresh-pc_asinst_1');
y := LENGTH ('rep_adminserver_paresh-pc_asinst_1') + 2;
x := RUN_REPORT_OBJECT (repid, pl_id);
WEB.SHOW_DOCUMENT('http://PARESH-PC:7001/reports/rwservlet/getjobid'||SUBSTR(x, y)||'?server=rep_adminserver_paresh-pc_asinst_1&userid=scott/TIGER@ORCL');
Destroy_parameter_list('tempdata');
END;
Above code doesn't show any error but report is not generated in the provided location.
Is modification to be done in the above code?
Please suggest.
Thanks in advance.
Edited by: parapr on Oct 2, 2012 1:30 AM

Hi,
as stated before if the desname value is pointing to the client filesystem it wont create the output there because Reports Server is not running on the client, it is running on the server as this is the way it is.
If you want to save output to the client you need to use the options mentioned before.
For testing purposes only change your code as follows.
e.g
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, 'c:\'||vACNAME||' '||:BLOCK50.DOCDATE||'.PDF') ;
As you can see I changed the original folder name to C:\ .. (I hope your reports serve is running on a Windows machine if not then changed to /tmp). Run your form and check c:\ or /tmp and see if you see the report output there. If so,
than your code is fine the only problem is what I have already stated.
Regards, Roberto

Migrating portal from 10g to 11g

Hi,
We are in the process of upgrading oracle mid tier from 10gAS to OFMW 11g and also migrating it from Solaris to Linux.
With regard the portal migration from OAS 10g to OFMW 11g
1) Is it possible to migrate portal objects from 10g (solaris) to a new install of OFMW portal 11g(linux) directly OR do we have to upgrade the existing OAS 10g to OFMW portal 11g (on Solaris) and then migrate the portal objects to OFMW Portal 11g (on Linux)
I am new to portal migration. Any suggestions and additional details would be appreciated.
Thanks
RB

Migration + upgrade in one shot is do-able, because upgrade will require a sequence of processes but they will be mostly based on repository upgrade, and hence will be transparent to the OS you are using.
However, in practice, the standard rule-of-thumb is that you avoid dealing with multiple layers of complications in a single shot. That means, you break complications in such steps where you could recognize the sources of any later errors/problems you encounter.
hope that helps!
AMN

How to only migrate data from SQL Server 2008 to Oracle 11?

According to our requirement, We need to only migrate data from a SQL Server database to an existed
Oracle database user.
1) I tried to do it with SQL Developer 3.0.04 Migration Wizard, But find an issue.
My SQL Server database name is SCDS41P2, and my Oracle database user name is CDS41P2;
When I used SQL Developer to do offline move data by Migration Wizard, I found all oracle user
name in movedata files which gotten by run Migration Wizard
is dbo_SCDS41P2. If the Oracle user name is not the same as my existed Oracle user name,
the data can't be moved to my existed Oracle user when I run oracle_ctl.bat in command line window.
So I had to modify the Oracle user name in all movedata files, but it's difficult to modify them because there are many tables in
databases. So could you please tell me how to get the movedata files which the oracle user name in them is my
expected Oracle user name?
2) I also tried to use the 'copy to Oracle' function to copy the SQL Server database tables data
to the existed Oracle database user. When clicked 'copy to Oracle', I selected 'Include Data' and 'Replace' option
But I found some tables can't be copied, the error info is as below:
Table SPSSCMOR_CONTROLTABLE Failed. Message: ORA-00955: name is already used by an existing object
Could you please tell me how to deal with this kind of error?
Thanks!
Edited by: 870587 on Jul 6, 2011 2:57 AM

Hi,
Thanks for you replying. But the 'copy to oracle' function still can't be work well. I will give some info about the table. I also search 'SPSSCMOR_CONTROLTABLE' in the target schema, and only find one object. So why say 'name is already used by an existing object'? Could you please give me some advice? Thanks!
What is the 'Build' version of your SQL*Developer ?
[Answer]:
3.0.04
- what does describe show for the SPSSCMOR_CONTROLTABLE in SQL*Server ?
[Answer]:
USE [SCDS41P2]
GO
/****** Object: Table [dbo].[SPSSCMOR_CONTROLTABLE] Script Date: 07/18/2011 01:25:05 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SPSSCMOR_CONTROLTABLE](
     [tablename] [nvarchar](128) NOT NULL,
PRIMARY KEY CLUSTERED
     [tablename] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
- what does describe show for the SPSSCMOR_CONTROLTABLE in Oracle ?
[Answer]:
-- File created - Monday-July-18-2011
-- DDL for Table SPSSCMOR_CONTROLTABLE
CREATE TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE"
(     "TABLENAME" NVARCHAR2(128)
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- DDL for Index SYS_C009547
CREATE UNIQUE INDEX "CDS41P2"."SYS_C009547" ON "CDS41P2"."SPSSCMOR_CONTROLTABLE" ("TABLENAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- Constraints for Table SPSSCMOR_CONTROLTABLE
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" MODIFY ("TABLENAME" NOT NULL ENABLE);
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" ADD PRIMARY KEY ("TABLENAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE;
Edited by: 870587 on Jul 18, 2011 1:42 AM

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

https://discussions.apple.com/message/16371308#16371308

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

Migrate data from one table to another

Hi,
I need to move data from work space -1 to work space -2. I need to move only selected data. From work space -1 to work space -2
Work space -1
Table -1_
ID NAME Description
1 xyz one
2 abc two
3 mnk three
Table -2_
ID PID NAME Description
1 1 x1 -
2 1 x2 -
3 2 a1 -
4 2 a2 -
5 3 m1 -
Table -1 is parent table and Table-2 is child. Here PID is parent key of table-1 and ID's in both the table are primary keys.
Now i need to move data from work space-1 to work space -2
Work Space -2 table structure
Table - 1
ID INDUSTRY_TYPE DATE DESC
1 TNT - -
2 MTN - -
Table - 2
ID T_ID NAME DATE DESC
1 1 T1 - -
1 1 T2 - -
2 2 E1 - -
2 2 E3 - -
I need to migrate data from work space -1 of table 1 and 2 to work space - 2 of table 1 and tabe 2
Please suggest me a query to migrate. Please let me know if the steps mentioned above is not clear.
Thanks
Sudhir

Using INSERT statement.
insert into <target table>(<column list>)
select <column list>
from <source table>

Migrating mailman from 10.5 to 10.6 Server

Similar Messages

Maybe you are looking for