Migrating Models and Metaoutlines from EIS to Studio

Hi John,
In the migration link: http://download.oracle.com/docs/cd/E12825_01/epm.111/est_help/eis_migration.htm
the point 7 says: Click in the Data Source Connection column and, from the drop-down list, select the target relational
database.
Note: The target relational database should match the Integration Services target data source.
Any idea wat it means?
I did not understand this.
-Regards,
Avishek.

It just means that in the dropdown you need to pick the name that maps to the schema where your meta/data tables are stored for the EIS model/metaoutline you are migrating.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Migrating OLAP Models and Metaoutlines from EIS to Studio.

Hi All,
I'm trying to migrate metaoutlines and olap models from EIS to Essbase Studio.
I am able to fetch all the models and metaoutlines but after that when i click on the Migrate button, it throws me this error:
Reading results from query for reading view attr failed. java.lang.NullPointerException
Any idea whats going wrong?
Kindly help.
Thanks in Advance.
Regards,
-Avishek

It just means that in the dropdown you need to pick the name that maps to the schema where your meta/data tables are stored for the EIS model/metaoutline you are migrating.
Cheers
John
http://john-goodwin.blogspot.com/

EIS model and metaoutline

Hi, I have made changes to EIS model and metaoutline, now i needto import XML file. Is there any sequence rule? Do i need to importEIS model first and then only metaoutline or i can do it viceversa?

I have a big problem with the import of XML file.The import do ok, but the drill doesnt work!! The Load data itsok, the problem is in the drill !!!When i try to use my report on add-in excel, the cell is marked( using style) as a cell that have LRO, but the drill doesntwork, i receive a message that ocurred a error with theintersection choosed!But when i run the original Metaoutline, everithing it isok!Any idea??

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

How do I migrate sites and settings from CS6 to CC?

How do I migrate sites and settings from CS6 to CC?
Now goddam way I am going to rebuild 13 websites just to use CC

Well. With Dreamweaver CC, you could use the Sync settings feature to transfer workspaces from one CC machine to the other.
But with CS6 workspaces being transferred to CC there is a not so intuitive way to do it.
Backup/Rename the CC workspace folder [resent at C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\configuration\workspace to anything you like.
Copy the workspace folder from C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\workspace to C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\configuration\workspace
Now you should have your CS6 workspaces in CC.

Manually migrating iPhoto and iTunes from Snow Leopard to Lion..

Hi all,
I received a shiny new iMac yesterday and in my haste to get it up and running, I began to run the migration assistant on wi-fi. Unfortunately, my 2006 macbook model is so old that my firewire cables don't actually fit the firewire port on the back of the iMac!!
11 hours later, there was still 40 hours left to go. At this point I manually quit the migration assistant. Partly because I have to work and to work I need to use a computer and partly because I realised that I don't want all the old crud from my previous system.. all I want is my iTunes (songs, apps, playlists etc) and my iPhoto to migrate.
The original admin account that the migration assistant was going to replace was still there. Everything seems to be working fine... I did a quick repair of disk permissions and all seems fine. So, I think I flirted with danger by quiting the migration assistant, but danger doesn't seem to have flirted back.
I've searched high and low on the web and I can't find any advice on migrating just your iPhoto and iTunes from Snow Leopard to Lion. I did read a post somewhere (relating to a migration to Leopard) where someone wrote that, for iPhoto, you simply had to replace your iPhoto Library in your pictures folder on the destination machine and then simply start iPhoto. iPhoto would upgrade the databases etc and all would be fine in the world. I cannot find a post online that suggests that this is also the case for Lion.
Can anyone here give me some hints on how to manually migrate the iPhoto and iTunes libraries over (and still preserve playlists in iTunes, albums/events in iPhoto etc)?
I figure that I cannot be the only person in the world who wants a "fresh start" on their machine, with the exception of iPhoto and iTunes.

Resident apple gurus at work have advised me to use the migration assistant and plug an ethernet cable between machines.
I'll give this a go and then go through the process of removing and cleaning up whatever old data I can.. but if someone posts a response to this question for me, I'll happily roll back in time-machine and go again in a cleaner way. :-)

I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Populator not working after deleting model and items from Oracle cofigurator.

I had created a ATO model, and populated it to the Configurator, worked with it, created UIs, tested with OM (and BOM) worked alright.
But, I had to delete the items and models in the Configurator as my playing around had messed it up. Now I populated it again from Oracle Apps, it is not bringing in the items (none at all) and it is not bringing in the options for option classes more then two level deep. Also, weirdly only the descriptions keep appearing in the Model tree node not the name, even if I choose it in the tree. I tried running purge configuraotr tables.
Do you have any idea why this is happening. Any help would be appreciated.
Thank you again.

First, back up your Mac. To learn how to do that read Mac Basics: Time Machine backs up your Mac
Then:
Launch the Console app - it is in your Utilities folder. You can find it by selecting Utilities from the Finder's Go menu.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu. Select Show Toolbar if it is not already shown.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem.
To do that click the Clear Display button in the Toolbar. All previously displayed log entries will reappear.
Next: Perform whatever actions cause the Mac to exhibit the slow behavior. If the problem is caused by errors logged by the system, the Console window will show them being recorded in system.log.
One or more of them, along with their time stamps, may reveal the reason for the problem you describe.
Copy and paste those log entries in a reply. If hundreds of the same repetitive messages appear, please edit them before posting. There should be no need for more than 100 or so total log entries.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

Migrating groups and users from QA to Production

Post Author: KSK
CA Forum: Administration
Hi,
I have to migrate security setup with Groups and users from QA to Production box .
setup is in Unix.
Note: my production already have some other projects related groups and Unix.. and when I say migrate, i just want to add the groups from qa to append or add to production with exsiting setup and not to overwrite..
any help is greately appericated
thanks
KSK

Post Author: andyskinner
CA Forum: Administration
Use the migration wizard and set it to merge, the deltas should be added ok and anything that exists in both systems should get a number added at the end.

Hot to migrate mail and settings from Mail 2.1.3 to Mail 3.5??

I'm migrating everything from a mac G4 running 10.4.11 to a Mac Pro running 10.5.6 - address book, calendar etc was find but I am having problems with Mail.
I want to import the emails, email accounts and other settings if possible such as rules and signatures from Mail 2.1.3 on the G4 into Mail 3.5 on the Mac Pro. I've looked through various postings/articles but are not 100% sure on how it is done? I've had a few botched goes but it inevitably ends up with missing folders, missing email etc
Any help would be appreciated.
Thanks
Phil

Thanks for the suggestion Debbi. After my previous message I was looking at the post 'Mail does not quit or show old messages after 10.4-10.5 migration' and tried the solution suggested there as copied below. Glad to say that it worked.
1. Navigate to your Library folder inside your home folder.
2. Locate the Mail folder and drag it to your desktop.
3. Launch the Mail application.
4. Mail will now ask you if you want import your messages. DO NOT HIT CONTINUE YET.
5. Navigate back to your Library folder inside your home folder. Notice there is a NEW mail folder that was created. You cannot delete this folder yet because it is in use by mail so we will just rename this folder Mail2.
6. Drag your OLD mail folder located on your desktop to your Library folder located in your home folder.
7. Go back to the Mail application and click continue. Your messages and settings should import fine now.
8. Verify that your messages and settings imported correctly and quit Mail. Navigate back to your home Library folder located in your home folder and delete the Mail2 folder.
9. Launch the Mail application again and make sure everything functions correctly.

How do I read the camera model and manufacturer from IMAQ in LabVIEW?

Hello All,
I have a machine vision application for automated test. I am required to save the image for each test for quality purposes. Since LabVIEW interfaces the CameraLink camera thru the IMAQ driver, various cameras can be used without changing the LabVIEW application. I need to store the basic configuration information, including camera model and manufacturer, with the image. I am able to read some parameters from IMAQ (like bit allocation and shutter speed) using the Read Attribute VI, but unable to read model and manufacturer.
Does anyone know how to read camera make/model from IMAQ in LabVIEW?

With this VI, any camera attribute that you can see and set in MAX, you should be able to see and set in LabVIEW. These are attributes that are defined in you camera file. Since Model/Make is not an "attribute" that you necessarily set, it is not included in your attributes tab in MAX.
If your camera file included a model attribute, then it would show up in MAX under attributes and you would be able to read it using the above-mentioned VI. The only thing I can suggest is perhaps use some File I/O instead of IMAQ VI's and read your camera file, if the ones you have are consistent in structure.
Hope this helps!
Tejinder Gill
National Instruments
Applications Engineer
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Is Possible to migrate DTR and JDI from HP to SUN system

Hi All,
We are migrating our landscape from HP systems to Sun Solaris systems. I wanted to i know is it possible to migrate the DTR and JDI(Tracks and everthing) from HP to the Sun System. Is there any tool available for that?
Regards
Prakash

This is already being discussed in the following topic: Migrating JDI Please continue there.
(Next time, please search SDN before you post something).

How do I migrate bookmarks and passwords from Ubuntu to OS X.

My Ubuntu computer still boots but its hard disk may be dying. I want to migrate my profile settings from Ubuntu to OS X on my Mac. I copied my Ubuntu profile folder onto a thumb drive. Everything seemed to copy fine except for one symbolic link. I tried to copy the contents over the contents of the Apple Mac's profile folder, but it seems to have had no effect.

When you run Firefox on your Mac, a Firefox profile folder is created with default data and settings. You have to remove the '''contents''' of the new Firefox profile folder on your Mac (e.g., the bookmarkbackups folder, places.sqlite , cookies.sqlite, etc.) and then copy over the '''contents''' of your old Firefox [[Profiles|profile folder]] to the Mac profile folder. You should do this selectively, just copying important files (like places.sqlite for bookmarks and browsing history). [[Recovering important data from an old profile]] lists important files and explains how to transfer the data to the new profile on your Mac. [[Backing up your information]] explains where the old profile data is stored and how to save a copy.
These articles may also help:
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Moving_your_profile_folder

Error "The Connection Failed" in Time Machine, Migration Assistant and Restore From DVD

I am receiving this error when trying to connect to my Time Machine Backup in my Time capsule. I input the proper password to access my Time Capsule and It returns me to the screen with the caption "The connection failed" under the Time Capsule name in the "Select your Disk" screen. What would cause this error. I am connecting via WIFI (AirPort) and have full signal. I am using Mac OSX 10.6.8
I recently had my 1TB hard drive replaced and I am attempting to restore using Time Machine, migration assistant or from the startup dvd (tried multiple ways, no success). The initial setup of mac OSX 10.6 would not let me connect or other attempts after erasing hard drive and reinstalling OSX from disk.
Worked on it all weekend and don't have enough beer to drown the frustration, any help is appreciated.

You are correct TM is not at all easy to do a full restore.
To answer your question: Yes TM disk does show up in finder.
After my initial startup setup I was able to start TM and access all my previous backups. I migrated some files and was able grab the data from finder. Not satisfied with that I tried to do a restore to that previous date, to no success. I then erased the HD and reinstalled OSx and tried again from the setup screen. That didn't work, sulked over some beers. I then tired with Migration assistant...same result (more beer).
In starting TM after trying MA, only one backup was showing in the Star screen (today). None of my previous backups were showing. Since exiting TM it has been "Making Backup Disk Available" ( xGB of 6.29GB). Considering the size, I can only assume that these are my previous backups.
I have reviewed Pondini's posts, FAQs, and tutorials. I am a little scared to try and locate the drives through Terminal as in Pondini's TS #6 guide. If I can get my previous backups to show up, I will be happy with dragging files from Finder to restore my data and slowly work at restoring my settings/applications.

Migrate tables and data from ODBC datasource to Oracle 11.2

Hiya
I have a database file in Dynamics NAV 5.0 native format - about 200-300 tables totalling maybe 10 GB worth of data.
My task is to migrate those tables with their data into a schema in our Oracle 11.2 database.
No tools support the NAV format directly :-) But I have a windows ODBC driver for that format that works.
The Oracle database runs on Linux and I have no ODBC transparent gateway and no linux ODBC driver that would let me access the NAV datafile directly from within Oracle.
I tried migration wizard in SQL Developer, but it seems it cannot use a "generic ODBC" datasource (even with JDBC-ODBC bridge), it must be a supported database format?
Then I have tried trial of product Altova MapForce, but it can't seem to read the schema (table/columns) from the ODBC datasource for some reason.
I know reading the schema from the ODBC datasource is possible - I have used third party product "Database Browser" that reads the ODBC with no problems.
And a colleague has read the schema of the ODBC in C# also.
I am primarily a SQL developer. My colleague said he could write in C# a program that looped over the tables in the ODBC, read the columns, executed "create table" in Oracle, read data from the ODBC, inserted data in Oracle.
But he is going on vacation right now :-( And I keep thinking that someone else must have written such a migration program ;-)
I just can't seem to find it by googling? Altova Mapforce was my best bet, but it just seems to have problems with this specific ODBC datasource.
Any ideas for a migration tool that can accept a generic ODBC datasource and not specifically SQL Server, MySQL, DB2, etc.?
Thanks for any hints that might help ;-)
Regards
Kim Berg Hansen

Hi Kim,
The earlier 9i and 10g generic connectivity option - HSODBC - could only run as part of the RDBMS but the 11g DG4ODBC can be installed and run standalone without an RDBMS. You then connect using database links from Linux using an entry in the RDBMS tnsnames.ora as you have said.
See these notes depending if Windows is 32-bit or 64-bit -
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install (Doc ID 466225.1)
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install (Doc ID 1266572.1)
The latest 11.2 version is available from My Oracle Support as -
Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
and for the gateways you only need to download -
p13390677_112040_WINNT_4of6.zip
for 32-bit but
p13390677_112040_MSWIN-x86-64_5of7.zip
for 64-bit.
The downloads have everything necessary for a gateway standalone install.
Regards,
Mike

Migrating Models and Metaoutlines from EIS to Studio

Similar Messages

Maybe you are looking for